This paper introduces a blended membrane which is prepared by coagulation of sodium alginate and konjac glucomannan（KGM） in an aqueous solution, and studies the effect of different concentrations of KGM on sodium al...This paper introduces a blended membrane which is prepared by coagulation of sodium alginate and konjac glucomannan（KGM） in an aqueous solution, and studies the effect of different concentrations of KGM on sodium alginate films. The structural characterization of prepared blend film was implemented by scanning electron microscopy（SEM） and Fourier transform infrared spectroscopy（FT-IR）, and the optimum ratio was determined by comparing fracture elongation, moisture absorption and moisture retention. The results indicate that the two polysaccharide molecules, sodium alginate and KGM, in the blend membrane have a good compatibility. The surface of blend film is smooth and uniform. The addition of KGM can significantly improve the moisture absorption and moisture retention performance of sodium alginate film, and its mechanical performance is also improved to some extent. The ratio of sodium alginate and KGM is 3.2∶1.5.展开更多
The physical and mechanical properties of blends composed of two kinds of epoxy resins of different numbers of functional groups and chemical structure were studied. One of the resins was a bifunctional epoxy resin ba...The physical and mechanical properties of blends composed of two kinds of epoxy resins of different numbers of functional groups and chemical structure were studied. One of the resins was a bifunctional epoxy resin based on diglycidyl ether of bisphenol A and the other resin was a multifunctional epoxy novolac resin. Attempt was made to establish a correlation between the structure and the final properties of cured epoxy samples. The blend samples containing high fraction of multifunctional epoxy resin showed higher solvent resistance and lower flexural modulus compared with the blends containing high fraction of bifunctional epoxy resin. The epoxy blends showed significantly higher ductility under bending test than the neat epoxy samples. The compressive modulus and strength increased with increasing of multifunctional epoxy in the samples, probably due to enhanced cross-link density and molecular weight. Morphological analysis revealed the presence of inhomogeneous sub-micrometer structures in all samples. The epoxy blends exhibited significantly higher fracture toughness（by 23% at most） compared with the neat samples. The improvement of the fracture toughness was attributed to the stick-slip mechanism for crack growth and activation of shear yielding and plastic deformation around the crack growth trajectories for samples with higher content of bifunctional epoxy resin as evidenced by fractography study.展开更多
基金Supported by the National Natural Science Foundation of China(5107312)
文摘This paper introduces a blended membrane which is prepared by coagulation of sodium alginate and konjac glucomannan（KGM） in an aqueous solution, and studies the effect of different concentrations of KGM on sodium alginate films. The structural characterization of prepared blend film was implemented by scanning electron microscopy（SEM） and Fourier transform infrared spectroscopy（FT-IR）, and the optimum ratio was determined by comparing fracture elongation, moisture absorption and moisture retention. The results indicate that the two polysaccharide molecules, sodium alginate and KGM, in the blend membrane have a good compatibility. The surface of blend film is smooth and uniform. The addition of KGM can significantly improve the moisture absorption and moisture retention performance of sodium alginate film, and its mechanical performance is also improved to some extent. The ratio of sodium alginate and KGM is 3.2∶1.5.
文摘The physical and mechanical properties of blends composed of two kinds of epoxy resins of different numbers of functional groups and chemical structure were studied. One of the resins was a bifunctional epoxy resin based on diglycidyl ether of bisphenol A and the other resin was a multifunctional epoxy novolac resin. Attempt was made to establish a correlation between the structure and the final properties of cured epoxy samples. The blend samples containing high fraction of multifunctional epoxy resin showed higher solvent resistance and lower flexural modulus compared with the blends containing high fraction of bifunctional epoxy resin. The epoxy blends showed significantly higher ductility under bending test than the neat epoxy samples. The compressive modulus and strength increased with increasing of multifunctional epoxy in the samples, probably due to enhanced cross-link density and molecular weight. Morphological analysis revealed the presence of inhomogeneous sub-micrometer structures in all samples. The epoxy blends exhibited significantly higher fracture toughness（by 23% at most） compared with the neat samples. The improvement of the fracture toughness was attributed to the stick-slip mechanism for crack growth and activation of shear yielding and plastic deformation around the crack growth trajectories for samples with higher content of bifunctional epoxy resin as evidenced by fractography study.
