基于Group-Res2Block的智能合成语音说话人确认方法

针对现有说话人确认任务基于自然语音条件下并不适用于智能合成语音的问题,提出一种基于Group-Res2Block的智能合成语音说话人确认方法。首先,设计了Group-Res2Block结构,在Res2Block的基础上将当前分组与相邻前后分组进行合并形成新的分组,以增强说话人局部特征的上下文联系;其次,设计了并行结构的多尺度通道注意力特征融合机制,利用不同大小卷积核实现同一层级的特征在通道维度的特征选择,以获取更具表现力的说话人特征,避免信息冗余;最后,设计了串行结构的多尺度层注意力特征融合机制,构建层结构,将深浅层特征整体进行融合并赋予不同权重,以获取最优的特征表达。为验证所提出特征提取网络的有效性,构建了中英文两种智能合成语音数据集进行消融实验和对比实验。结果表明本文方法在该任务的评价指标精确度(accuracy,ACC)、等错误率(equal error rate,EER)和最小检测代价函数(minimum detection cost function,minDCF)上是最优的。此外,通过对模型泛化性能进行测试,验证了本文方法对未知智能语音算法的适用性。

Metamorphic P-T conditions and ages of garnet-biotite schists in the Dahongshan Group from the southwestern Yangtze Block

The Dahongshan Group,situated at the southwestern margin of the Yangtze Block,represents a geological unit characterized by relatively high-grade metamorphism in the region.This paper investigates the garnet-biotite schist from the Laochanghe Formation of the Dahongshan Group,employing an integrated approach that includes petrological analysis,phase equilibrium modeling,and zircon U-Pb dating.The schist is mainly composed of garnet,biotite,plagioclase,quartz,rutile,and ilmenite.Phase equilibrium modeling revealed the peak metamorphic conditions of 8-9 kbar and 635-675°C.By further integrating the prograde metamorphic profile of garnet and geothermobarometric results,a clockwise P-T metamorphic evolution path is constructed,which includes an increase in temperature and pressure during the prograde stage.LA-ICP-MS zircon U-Pb dating and zircon Ti thermometry constrains the post-peak metamorphic age of 831.2±7.2 Ma.Integrated with previously reported results,it is revealed that the southwestern margin of the Yangtze Block experienced a large-scale regional metamorphism during the Neoproterozoic(890-750 Ma),which is related to the collisional orogenic process.This may be associated with the late-stage assembly of the Rodinia supercontinent or with local compression and subduction processes during the breakup of the Rodinia supercontinent.

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various industries.The conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient protection.In the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly technique.The outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)film.The FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier capability.The Ce film connects the outer layer with the substrate,showing the transition effect.The corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling behavior.The synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

Coal petrology,sedimentology and depositional environment of the Parvadeh coais in the Upper Triassic,Tabas Block of Central-East Iran

Peat forming environment strongly influences the economic value of any coal seam and coal-bearing strata.Hence,pal-aeoenvironmental studies provide important information for coal resource exploration.In this context,detailed studies on selected coals from the Parvadeh Area,Iran,were conducted using sedimentology,coal petrology,X-ray diffraction(XRD),scanning electron microscopy-energy dispersive X-ray analyzer(SEM-EDX),and proximate analysis.The sedi-mentary facies above and below the coal seams are mainly marine or marine-influenced facies,supporting that the coal-forming mires in the Parvadeh Area developed in a paralic environment,where the base level must be closely related to sea level.Sulfur contents are moderate to high and mark the influence of brackish/marine water,especially during transgres-sion after peat growth in a lower delta plain environment.The peat-forming mires extended on coastal/delta plain lobes.The lower delta plain/coastal plain coals are characterized by lateral continuity and substantial thickness,whereas few coals possibly representing the upper delta plain are thin and more discontinuous.The detrital nature and composition of the numerous partings and the overall high ash yield in the coal seams indicate an active tectonic area with high rates of creation of accommodation space over peat growth.Coal petrology and coal facies analysis exhibits a permanently high water table within a forest swamp and mostly rheotrophic conditions,sometimes with connection to the seawater.Accord-ing to paleoenvironmental reconstructions,it seems that coal layers may be thicker,with less sulfur(pyrite),but more clastic minerals and partings toward the western part of the area.Although these coal seams presently have low economic potential for the mining operation,partly due to great depth,this humic,high-volatile to medium-volatile bituminous coal may be suitable for exploration of coal bed methane resources.

Redetermination of the Depositional Age of the Haerdaban Group in the Northern Margin of the Yili Block,Western Tianshan,NW China:Implications for Regional Tectonics and Pb-Zn Mineralization

The Yili Block in the Western Tianshan orogen is a key area for understanding the early crustal formation and evolution of the Central Asian orogenic belt,due to the widely-distributed Precambrian rocks.Also,it hosts a lot of medium–to large-scale sedimentary exhalative(SEDEX)Pb-Zn deposits that mainly occur in Proterozoic metamorphosed clasticcarbonate rocks.In this study,LA-ICP-MS U-Pb analyses were carried out on detrital zircons in siltstones of the Precambrian Haerdaban Group in the Haerdaban Pb-Zn deposit and magmatic zircons in the diorite dyke that cuts through the strata and orebodies.The maximum depositional age of the siltstones was determined to be about 604 Ma,the diorite having formed at approximately 500 Ma.As such,the Haerdaban Group was most likely formed in the Neoproterozoic Sinian,rather than the previously considered Mesoproterozoic Changchengian.Detrital materials of the Haerdaban Group were mostly derived from the Nanhua–Sinian mafic dykes and granitic rocks around Lake Sayram at the northern margin of the Yili Block.It is proposed that the Yili Block,together with the Kazakhstan and Central Tianshan blocks and the Tarim Craton,might all pertain to the same Rodinia supercontinent,which has great potential for targeting large to super-large SEDEX Pb-Zn deposits.

Novel approach of ultrasound-guided lateral recess block for a patient with lateral recess stenosis: A case report

BACKGROUND Ultrasound guide technology,which can provide real-time visualization of the needle tip and tissues and avoid many adverse events,is widely used in mini-mally invasive therapy.However,the studies on ultrasound-guided Lateral recess block(LRB)are limited,this is probably because there is no recognized standard method for ultrasound scanning.This study aimed to evaluate the effect of ultrasound-guided LRB in patients with lateral recess stenosis(LRS).CASE SUMMARY A 65-year-old patient complained of low back pain accompanied occasionally by pain and numbness in the left lower limb.Physical examination showed ten-derness on the spinous process and paraspinal muscles from L1 to S1,extensor hallucis longus and tibialis anterior weakness(muscle strength:4-),and a positive straight leg raising test in the left lower limb(60°).Magnetic resonance imaging showed L4–L5 disc degeneration with left LRS and nerve root entrapment.Subsequently,the patient was diagnosed with LRS.This patient was treated with a novel ultrasound-guided LRB approach.The patient’s symptoms significantly improved without any complications at 1 wk postoperatively and at the 3-month follow-up.CONCLUSION This is the first report on the LRS treatment with ultrasound-guided LRB from the contralateral spinous process along the inner side of the articular process by out-plane technique.Further studies are expected to investigate the efficacy and safety of ultrasound-guided LRB for patients with LRS.

Modelling erosion of a single rock block using a coupled CFD-DEM approach

Rock block removal is the prevalent physical mechanism for rock erosion and could affect the stability of dam foundations and spillways.Despite this,understanding of block removal is still inadequate because of the complex interactions among block characteristics,hydraulic forces,and erosive processes acting on the block.Herein,based on a previously conducted physical experiment of erosion of a single rock block,the removal processes of two different protruding blocks are represented by a coupled computational fluid dynamics-discrete element model(CFD-DEM)approach under varied flow conditions.Additionally,the blocks could be rotated with respect to the flow direction to consider the effect of the discontinuity orientation on the block removal process.Simulation results visualize the entire block removal process.The simulations reproduce the effects of the discontinuity orientation on the critical flow velocity inducing block incipient motion and the trajectory of the block motion observed in the physical experiments.The numerical results present a similar tendency of the critical velocities at different discontinuity orientations but have slightly lower values.The trajectory of the block in the simulations fits well with the experimental measurements.The relationship between the dimensionless critical shear stress and discontinuity orientation observed from the simulations shows that the effect of block protrusion becomes more dominant on the block incipient motion with the increase of relative protrusion height.To our knowledge,this present study is the first attempt to use the coupled finite volume method(FVM)-DEM approach for modelling the interaction behavior between the block and the flowing water so that the block removal process can be reproduced and analyzed.

Some Results for Exact Support Recovery of Block Joint Sparse Matrix via Block Multiple Measurement Vectors Algorithm

Block multiple measurement vectors (BMMV) is a reconstruction algorithm that can be used to recover the support of block K-joint sparse matrix X from Y = ΨX + V. In this paper, we propose a sufficient condition for accurate support recovery of the block K-joint sparse matrix via the BMMV algorithm in the noisy case. Furthermore, we show the optimality of the condition we proposed in the absence of noise when the problem reduces to single measurement vector case.

Liposomal Bupivacaine in Erector Spinae Plane Block and Interscalene Block for Scapular and Proximal Humerus Resections

Erector spinae plane block (ESPB) is a novel fascial plane block that was first described in 2016. It is considered an alternative for brachial plexus blocks in shoulder surgeries as the erector spinae muscle extends to the cervical level. Herein, we present a successful multilevel ESPB plus an interscalene block using liposomal bupivacaine in a 45-year-old female patient with metastatic sarcoma who presented for scapula and proximal humerus resection. The post-operative course was smooth, and the patient was discharged home on post-operative day 2 with minimal narcotic requirements.

A nanobody-based blocking enzyme-linked immunosorbent assay for detecting antibodies against pseudorabies virus glycoprotein E

Pseudorabies(PR)is an acute infectious disease of pigs caused by the PR virus(PRV)and results in great economic losses to the pig industry worldwide.PRV glycoprotein E(gE)-based enzyme-linked immunosorbent assay(ELISA)has been used to distinguish gE-deleted vaccine-immunized pigs from wild-type virus-infected pigs to eradicate PR in some countries.Nanobody has the advantages of small size and easy genetic engineering and has been a promising diagnostic reagent.However,there were few reports about developing nanobody-based ELISA for detecting anti-PRV-gE antibodies.In the present study,the recombinant PRV-gE was expressed with a bacterial system and used to immunize the Bactrian camel.Then,two nanobodies against PRV-gE were screened from the immunized camel by phage display technique.Subsequently,two nanobody-HRP fusion proteins were expressed with HEK293T cells.The PRV-gE-Nb36-HRP fusion protein was selected as the probe for developing the blocking ELISA(bELISA)to detect anti-PRV-gE antibodies.Through optimizing the conditions of bELISA,the amount of coated antigen was 200 ng per well,and dilutions of the fusion protein and tested pig sera were separately 1:320 and 1:5.The cut-off value of bELISA was 24.20%,and the sensitivity and specificity were 96.43 and 92.63%,respectively.By detecting 233 clinical pig sera with the developed bELISA and a commercial kit,the results showed that the coincidence rate of two assays was 93.99%.Additionallly,epitope mapping showed that PRV-gE-Nb36 recognized a conserved conformational epitope in different reference PRV strains.Simple,great stability and low-cost nanobody-based bELISA for detecting anti-PRV-gE antibodies were developed.The bELISA could be used for monitoring and eradicating PR.

Geochemistry, zircon U–Pb geochronology, and Hf isotopes of S-type granite in the Baoshan block, constraints on the age and evolution of the Proto-Tethys

Geochemistry, zircon U–Pb geochronology, and Hf isotope data for the Early Paleozoic granites in the Baoshan Block reveal the Early Paleozoic tectonic evolution of the Proto-Tethys. The samples are high-K, calcalkaline, strongly peraluminous rocks with A/CNK values of 1.37–1.46, are enriched in SiO2, K2O, and Rb, and are depleted in Nb, P, Ti, Eu, and heavy rare earth elements,which indicates the crystallization fractionation of the granitic magma. Zircon U–Pb dating indicates that they formed in ca. 480 Ma. The Nansa granites have εHf(t) values ranging from-16.04 to 4.36 with corresponding TC DMages of 2.10–0.81 Ga, which suggests the magmas derived from the partial melting of ancient metasedimentary with minor involvement of mantle-derived components. A synthesis of data for the Early Paleozoic igneous rocks in the Baoshan block and adjacent(Tengchong,Qiangtang, Sibumasu, Himalaya, etc.) blocks indicates that these blocks were all aligned along the proto-Tethyan margin of East Gondwana in the Early Paleozoic. The Early Paleozoic S-type granites from Nansa were generated in a high-temperature and low-pressure(HTLP) extensional tectonic setting, which resulted from Andean-type orogeny instead of the final assembly of Gondwana or crustal extension in a non-arc environment. In certain places, an expanding environment may exist in opposition to the tectonic backdrop of the lithosphere’s thickening and shortening, leading the crust to melt and decompress,mantle-derived materials to mix, and a small quantity of peraluminous granite to emerge.

The late Early-Paleozoic granitic magmatism in Northwestern Fujian, China: constraints on intraplate orogeny in the South China block

The Early Paleozoic tectono-thermal event was a significant orogenic activity during the Phanerozoic era,which had a profound impact on the early crust of the South China Block(SCB) and established the foundation for later tectonic activity.The Wuyi-Yunkai orogenic belt in Southeastern China was extensively exposed to Early Paleozoic magmatism,the genetic mechanism of which remains controversial.To shed light on this issue,detailed petrological,geochemical,and zircon U-Pb-Hf isotopic studies were carried out on two granitoids,namely the Yuntongshan pluton and the Gaoqiao pluton,identified in the central Wuyishan.Zircon U-Pb chronology of the Yuntongshan and Gaoqiao bodies yielded ages of437±4 Ma(MSWD=2.2) and 404±2 Ma(MSWD=12),respectively,indicating that they were emplaced during the Early Silurian and Early Devonian periods.These granitoids are primarily composed of biotite-granite and biotite-monzonitic-granites,with high concentrations of S_(i)O_(2)(73.59-75.91 wt%),K_(2)O+Na_(2)O(8.31-8.73wt%),and low contents of MgO,CaO,Cr,Ni.They are classified as high-K calc-alkaline and weakly metaluminous-strongly peraluminous S-type granites.These granitoids are enriched in light rare earth elements(LREEs) and large ion lithophile elements(LILEs) and depleted in heavy rare earth elements(HREEs) and high field strength elements(HFSEs) with arc affinity.The εHf(t) values of-3.3 to-15.4 with two-stage Hf model ages ranging from 2829 to 1644 Ma,combined with the presence of Neoproterozoic inherited zircons,suggest that the primary magma of these granitoids was derived from the partial melting of Neoproterozoic crust with a Paleoproterozoic crustal model age.These findings,combined with the spatio-temporal distribution of regional magmatism,reveal that the late Early-Paleozoic granitoids formed in the intraplate orogenic background originating from the subduction of the proto-Tethys Ocean and proto-Pacific Ocean around the margin of the east Gondwana supercontinent.

Investigation of the block toppling evolution of a layered model slope by centrifuge test and discrete element modeling

Primary toppling usually occurs in layered rock slopes with large anti-dip angles.In this paper,the block toppling evolution was explored using a large-scale centrifuge system.Each block column in the layered model slope was made of cement mortar.Some artificial cracks perpendicular to the block column were prefabricated.Strain gages,displacement gages,and high-speed camera measurements were employed to monitor the deformation and failure processes of the model slope.The centrifuge test results show that the block toppling evolution can be divided into seven stages,i.e.layer compression,formation of major tensile crack,reverse bending of the block column,closure of major tensile crack,strong bending of the block column,formation of failure zone,and complete failure.Block toppling is characterized by sudden large deformation and occurs in stages.The wedge-shaped cracks in the model incline towards the slope.Experimental observations show that block toppling is mainly caused by bending failure rather than by shear failure.The tensile strength also plays a key factor in the evolution of block toppling.The simulation results from discrete element method(DEM)is in line with the testing results.Tensile stress exists at the backside of rock column during toppling deformation.Stress concentration results in the fragmented rock column and its degree is the most significant at the slope toe.

An Encode-and CRT-Based Scalability Scheme for Optimizing Transmission in Blockchain

Blockchain technology has witnessed a burgeoning integration into diverse realms of economic and societal development.Nevertheless,scalability challenges,characterized by diminished broadcast efficiency,heightened communication overhead,and escalated storage costs,have significantly constrained the broad-scale application of blockchain.This paper introduces a novel Encode-and CRT-based Scalability Scheme(ECSS),meticulously refined to enhance both block broadcasting and storage.Primarily,ECSS categorizes nodes into distinct domains,thereby reducing the network diameter and augmenting transmission efficiency.Secondly,ECSS streamlines block transmission through a compact block protocol and robust RS coding,which not only reduces the size of broadcasted blocks but also ensures transmission reliability.Finally,ECSS utilizes the Chinese remainder theorem,designating the block body as the compression target and mapping it to multiple modules to achieve efficient storage,thereby alleviating the storage burdens on nodes.To evaluate ECSS’s performance,we established an experimental platformand conducted comprehensive assessments.Empirical results demonstrate that ECSS attains superior network scalability and stability,reducing communication overhead by an impressive 72% and total storage costs by a substantial 63.6%.

Failure evaluation and control factor analysis of slope block instability along traffic corridor in Southeastern Tibet

The instability of slope blocks occurred frequently along traffic corridor in Southeastern Tibet(TCST),which was primarily controlled by the rock mass structures.A rapid method evaluating the control effects of rock mass structures was proposed through field statistics of the slopes and rock mass structures along TCST,which combined the stereographic projection method,modified M-JCS model,and limit equilibrium theory.The instabilities of slope blocks along TCST were then evaluated rapidly,and the different control factors of instability were analyzed.Results showed that the probabilities of toppling(5.31%),planar(16.15%),and wedge(35.37%)failure of slope blocks along TCST increased sequentially.These instability modes were respectively controlled by the anti-dip joint,the joint parallel to slope surface with a dip angle smaller than the slope angle(singlejoint),and two groups of joints inclined out of the slope(double-joints).Regarding the control effects on slope block instability,the stabilization ability of doublejoints(72.7%),anti-dip joint(67.4%),and single-joint(57.6%)decreased sequentially,resulting in different probabilities of slope block instability.Additionally,nearby regional faults significantly influenced the joints,leading to spatial heterogeneity and segmental clustering in the stabilization ability provided by joints to the slope blocks.Consequently,the stability of slope blocks gradually weakened as they approached the fault zones.This paper can provide guidance and assistance for investigating the development characteristics of rock mass structures and the stability of slope blocks.

Vehicle Abnormal Behavior Detection Based on Dense Block and Soft Thresholding

With the rapid advancement of social economies,intelligent transportation systems are gaining increasing atten-tion.Central to these systems is the detection of abnormal vehicle behavior,which remains a critical challenge due to the complexity of urban roadways and the variability of external conditions.Current research on detecting abnormal traffic behaviors is still nascent,with significant room for improvement in recognition accuracy.To address this,this research has developed a new model for recognizing abnormal traffic behaviors.This model employs the R3D network as its core architecture,incorporating a dense block to facilitate feature reuse.This approach not only enhances performance with fewer parameters and reduced computational demands but also allows for the acquisition of new features while simplifying the overall network structure.Additionally,this research integrates a self-attentive method that dynamically adjusts to the prevailing traffic conditions,optimizing the relevance of features for the task at hand.For temporal analysis,a Bi-LSTM layer is utilized to extract and learn from time-based data nuances.This research conducted a series of comparative experiments using the UCF-Crime dataset,achieving a notable accuracy of 89.30%on our test set.Our results demonstrate that our model not only operates with fewer parameters but also achieves superior recognition accuracy compared to previous models.

General Method of Combining Grover and Simon for Attacking Block Ciphers

The compatibility of different quantum algorithms should be considered when these algorithms are combined.In this paper,the method of combining Grover and Simon is studied for the first time,under some preconditions or assumptions.First,we give two preconditions of applying Grover’s algorithm,which ensure that the success probability of finding the marked element is close to 1.Then,based on these two preconditions,it is found out that the success probability of the quantum algorithm for FXconstruction is far less than 1.Furthermore,we give the design method of the Oracle function,and then present the general method of combining Grover and Simon algorithm for attacking block ciphers,with success probability close to 1.

Ultrasound-guided sphenopalatine ganglion block for effective analgesia during awake fiberoptic nasotracheal intubation: A case report

BACKGROUND Awake fiberoptic nasotracheal intubation(AFNI)is the preferred airway ma-nagement strategy for patients with difficult airways.However,this procedure can cause significant physical and psychological distress.This case report explores the application of a sphenopalatine ganglion(SPG)block as an alternative anal-gesic modality to mitigate the discomfort associated with AFNI.CASE SUMMARY A 63-year-old female with a history of right maxillary osteosarcoma underwent craniotomy for a suspected malignant brain lesion.The patient’s medical history included prior surgery,chemotherapy,and radiation therapy,resulting in signi-ficant jaw impairment and limited neck mobility.Considering the anticipated air-way challenges,AFNI was planned.A SPG block was performed under real-time ultrasound guidance,providing effective analgesia during nasotracheal intuba-tion.CONCLUSION The SPG block represents a promising analgesic approach in AFNI,offering po-tential benefits in alleviating pain involving the nasal and nasopharyngeal regions as well as improving patient cooperation.

Development of a DFN-based probabilistic block theory approach for bench face angle design in open pit mining

In open pit mining,uncontrolled block instabilities have serious social,economic and regulatory consequences,such as casualties,disruption of operation and increased regulation difficulties.For this reason,bench face angle,as one of the controlling parameters associated with block instabilities,should be carefully designed for sustainable mining.This study introduces a discrete fracture network(DFN)-based probabilistic block theory approach for the fast design of the bench face angle.A major advantage is the explicit incorporation of discontinuity size and spatial distribution in the procedure of key blocks testing.The proposed approach was applied to a granite mine in China.First,DFN models were generated from a multi-step modeling procedure to simulate the complex structural characteristics of pit slopes.Then,a modified key blocks searching method was applied to the slope faces modeled,and a cumulative probability of failure was obtained for each sector.Finally,a bench face angle was determined commensurate with an acceptable risk level of stability.The simulation results have shown that the number of hazardous traces exposed on the slope face can be significantly reduced when the suggested bench face angle is adopted,indicating an extremely low risk of uncontrolled block instabilities.

Databases of 2D material-substrate interfaces and 2D charged building blocks

Discovery of materials using“bottom-up”or“top-down”approach is of great interest in materials science.Layered materials consisting of two-dimensional(2D)building blocks provide a good platform to explore new materials in this respect.In van der Waals(vdW)layered materials,these building blocks are charge neutral and can be isolated from their bulk phase(top-down),but usually grow on substrate.In ionic layered materials,they are charged and usually cannot exist independently but can serve as motifs to construct new materials(bottom-up).In this paper,we introduce our recently constructed databases for 2D material-substrate interface(2DMSI),and 2D charged building blocks.For 2DMSI database,we systematically build a workflow to predict appropriate substrates and their geometries at substrates,and construct the 2DMSI database.For the 2D charged building block database,1208 entries from bulk material database are identified.Information of crystal structure,valence state,source,dimension and so on is provided for each entry with a json format.We also show its application in designing and searching for new functional layered materials.The 2DMSI database,building block database,and designed layered materials are available in Science Data Bank at https://doi.org/10.57760/sciencedb.j00113.00188.