A miniaturized broadband Wilkinson power divider is proposed. Micro-strip branch lines are introduced to replace multiple resistors used in multi-stage Wilkinson power dividers to increase the bandwidth of single-stag...A miniaturized broadband Wilkinson power divider is proposed. Micro-strip branch lines are introduced to replace multiple resistors used in multi-stage Wilkinson power dividers to increase the bandwidth of single-stage Wilkinson power dividers. To demonstrate its performance, an improved single-stage Wilkinson power divider with four micro-strip branch lines was designed. Simulated results show that the insert loss is better than 3.2 dB, the input return loss, output return loss, and isolation are better than 15 dB respectively, across a 76% bandwidth from 18 to 40 GHz. .展开更多
In this paper, a new idea of reconfigurable 3/6 dB branch line coupler is proposed. The proposed coupler is tuned through a simple open and short circuit at the coupler’s branches’ edges. At the short edges case, a ...In this paper, a new idea of reconfigurable 3/6 dB branch line coupler is proposed. The proposed coupler is tuned through a simple open and short circuit at the coupler’s branches’ edges. At the short edges case, a 3 dB branch line coupler is obtained. In this case, the coupler’s branches are considered as microstrip transmission lines with 0.3 mm slot width which is etched in each coupler’s branch. At the open edges case, the coupler’s branches are considered as asymmetric coupled microstrip lines. In this case, a 6 dB branch line coupler is obtained. Both CST and IE3D simulators are used to optimize the reconfigurable 3/6 dB branch line coupler dimensions. As a prototypes, two BLCs are designed, analyzed and tested at the “on” and “off” states at 2.5 GHz. The measured S-parameters confirm the proposed concept of the reconfigurable 3/6 dB branch line coupler.展开更多
This paper presents a miniaturized microstrip branch-line coupler with good harmonic suppression performance. The proposed coupler consists of four branch-line sections, each of which is loaded by open-circuit stubs b...This paper presents a miniaturized microstrip branch-line coupler with good harmonic suppression performance. The proposed coupler consists of four branch-line sections, each of which is loaded by open-circuit stubs both at the center and the two ends. This type of loading can realize size reduction and harmonic suppression. As an example, a proposed branch-line coupler operating at 1.0 GHz is designed, fabricated and measured. The results show that the proposed branch-line coupler occupies 67% size of a conventional one and has better than 20 dB suppression from 1.9 to 5.8 GHz. Furthermore, the high slop of the transition band ensures good selectivity of the coupler.展开更多
This paper presents a concurrent dual-band branch-line coupler with an independently tunable center frequency. In the proposed architecture, the quarter-wavelength lines, which work at two separated bands concurrently...This paper presents a concurrent dual-band branch-line coupler with an independently tunable center frequency. In the proposed architecture, the quarter-wavelength lines, which work at two separated bands concurrently and can be tuned in one of them, are key components. Based on the analysis of ABCD-matrix, a novel hybrid structure and a pair of varactors topology are utilized to achieve concurrent dual-band operation and independent tunability, respectively. Using this configuration, it is convenient to tune the center frequency of the upper band, while the responses of the lower band remain unaltered. To verify the proposed idea, a demonstration is implemented and the simulated results are presented.展开更多
Maintenance Engineering Department of China Eastern Jiangxi Branch has 130 employees and manages four Airbuses A319 and two A320s. seen from the ratio of man to plane, it is the lowest among China Eastern branches (su...Maintenance Engineering Department of China Eastern Jiangxi Branch has 130 employees and manages four Airbuses A319 and two A320s. seen from the ratio of man to plane, it is the lowest among China Eastern branches (subsidiaries). Due to the requirement of the air market, the six planes are arranged separately in Nanchang, Shanghai, Fuzhou and Ningbo, thus the six planes are maintained in four places, which is unique among China展开更多
The indoor access network is characterized by several branches that cause many reflections. In this paper, we present an approach to model the transfer function of electrical power lines for broadband power line commu...The indoor access network is characterized by several branches that cause many reflections. In this paper, we present an approach to model the transfer function of electrical power lines for broadband power line communication. The assuming channel consists of three wires, which is widely used in many countries. As an application of the proposed method, the effect of line length from transmitter to receiver, branched line length and number of branched are also studied. From the frequency response of the transfer function (magnitude and phase), it is seen that the position of notches and peaks in the magnitude responses are largely affected in terms of attenuation by the electrical network which consists of 15 branches.展开更多
文摘A miniaturized broadband Wilkinson power divider is proposed. Micro-strip branch lines are introduced to replace multiple resistors used in multi-stage Wilkinson power dividers to increase the bandwidth of single-stage Wilkinson power dividers. To demonstrate its performance, an improved single-stage Wilkinson power divider with four micro-strip branch lines was designed. Simulated results show that the insert loss is better than 3.2 dB, the input return loss, output return loss, and isolation are better than 15 dB respectively, across a 76% bandwidth from 18 to 40 GHz. .
文摘In this paper, a new idea of reconfigurable 3/6 dB branch line coupler is proposed. The proposed coupler is tuned through a simple open and short circuit at the coupler’s branches’ edges. At the short edges case, a 3 dB branch line coupler is obtained. In this case, the coupler’s branches are considered as microstrip transmission lines with 0.3 mm slot width which is etched in each coupler’s branch. At the open edges case, the coupler’s branches are considered as asymmetric coupled microstrip lines. In this case, a 6 dB branch line coupler is obtained. Both CST and IE3D simulators are used to optimize the reconfigurable 3/6 dB branch line coupler dimensions. As a prototypes, two BLCs are designed, analyzed and tested at the “on” and “off” states at 2.5 GHz. The measured S-parameters confirm the proposed concept of the reconfigurable 3/6 dB branch line coupler.
基金Supported by the National Natural Science Foundation of China (No. 51007040)
文摘This paper presents a miniaturized microstrip branch-line coupler with good harmonic suppression performance. The proposed coupler consists of four branch-line sections, each of which is loaded by open-circuit stubs both at the center and the two ends. This type of loading can realize size reduction and harmonic suppression. As an example, a proposed branch-line coupler operating at 1.0 GHz is designed, fabricated and measured. The results show that the proposed branch-line coupler occupies 67% size of a conventional one and has better than 20 dB suppression from 1.9 to 5.8 GHz. Furthermore, the high slop of the transition band ensures good selectivity of the coupler.
基金Supported by the Provincial Natural Science Foundation of Zhejiang(No.Y1101270)the National Natural Science Foundation of China(No.61171040)+1 种基金Ningbo University Disciplinary Project(No.XKL141038)Agilent Technologies Inc.Research Project(No.3110)
文摘This paper presents a concurrent dual-band branch-line coupler with an independently tunable center frequency. In the proposed architecture, the quarter-wavelength lines, which work at two separated bands concurrently and can be tuned in one of them, are key components. Based on the analysis of ABCD-matrix, a novel hybrid structure and a pair of varactors topology are utilized to achieve concurrent dual-band operation and independent tunability, respectively. Using this configuration, it is convenient to tune the center frequency of the upper band, while the responses of the lower band remain unaltered. To verify the proposed idea, a demonstration is implemented and the simulated results are presented.
文摘Maintenance Engineering Department of China Eastern Jiangxi Branch has 130 employees and manages four Airbuses A319 and two A320s. seen from the ratio of man to plane, it is the lowest among China Eastern branches (subsidiaries). Due to the requirement of the air market, the six planes are arranged separately in Nanchang, Shanghai, Fuzhou and Ningbo, thus the six planes are maintained in four places, which is unique among China
文摘The indoor access network is characterized by several branches that cause many reflections. In this paper, we present an approach to model the transfer function of electrical power lines for broadband power line communication. The assuming channel consists of three wires, which is widely used in many countries. As an application of the proposed method, the effect of line length from transmitter to receiver, branched line length and number of branched are also studied. From the frequency response of the transfer function (magnitude and phase), it is seen that the position of notches and peaks in the magnitude responses are largely affected in terms of attenuation by the electrical network which consists of 15 branches.
