The automobile industry has been searching for vehicles that use less energy and emit fewer pollutants, which has resulted in a high demand for fuel-efficient vehicles. Because of their higher strength-to-weight ratio...The automobile industry has been searching for vehicles that use less energy and emit fewer pollutants, which has resulted in a high demand for fuel-efficient vehicles. Because of their higher strength-to-weight ratio compared to traditional steel, using fiber-reinforcement composite materials in automobile bodies has emerged as the most effective strategy for improving fuel efficiency while maintaining safety standards. This research paper examined the utilization of fiber-reinforced composite materials in car bodies to meet the increasing consumer demand for fuel-efficient and eco-friendly vehicles. It particularly focused on a carbon-aramid fiber-reinforced composite impact beam for passenger car side door impact protection. Despite the encouraging prospects of the carbon-aramid fiber-reinforced beam, the research uncovered substantial defects in the fabrication process, resulting in diminished load-bearing capacity and energy absorption. As a result, the beam was un-successful in three-point bending tests. This was accomplished by using an I cross-section design with varying thickness because of the higher area moment of inertia. Vacuum-assisted resin transfer molding (VARTM) manufacturing process was used and the finished beam underwent to three-point bending tests.展开更多
The number and creativity of side channel attacks have increased dramatically in recent years. Of particular interest are attacks leveraging power line communication to 1) gather information on power consumption from ...The number and creativity of side channel attacks have increased dramatically in recent years. Of particular interest are attacks leveraging power line communication to 1) gather information on power consumption from the victim and 2) exfiltrate data from compromised machines. Attack strategies of this nature on the greater power grid and building infrastructure levels have been shown to be a serious threat. This project further explores this concept of a novel attack vector by creating a new type of penetration testing tool: an USB power adapter capable of remote monitoring of device power consumption and communicating through powerline communications.展开更多
利用大型有限元分析软件ANSYS分析了国际热核实验反应堆(ITER)Side校正场线圈(CC)端部三维大圆弧模压成形及释放模具后导体的回弹效应,研究了不同半径成形时导体内外表面的应力、应变的分布及释放模具后导体的回弹规律。设计了1套模压...利用大型有限元分析软件ANSYS分析了国际热核实验反应堆(ITER)Side校正场线圈(CC)端部三维大圆弧模压成形及释放模具后导体的回弹效应,研究了不同半径成形时导体内外表面的应力、应变的分布及释放模具后导体的回弹规律。设计了1套模压成形模具,通过修模的方式在该套成形模具上进行了不同半径成形试验,测得了不同成形半径时模压成形后的回弹量值。试验结果验证了所建立的有限元分析模型的正确性。有限元分析和试验结果表明:ITERSideCC端部三维大圆弧可通过模压成形达到所需的大半径要求,为ITER Side CC端部三维大圆弧成形提供了一种可行方案。展开更多
[Objective] Indigenous plants with favorable water and soil conservation effects were screened for the shrub planting.[Method] Suining-Ziyang-Meishan Highway in the hilly areas of central Sichuan Province was taken fo...[Objective] Indigenous plants with favorable water and soil conservation effects were screened for the shrub planting.[Method] Suining-Ziyang-Meishan Highway in the hilly areas of central Sichuan Province was taken for example,through sorting out plant species investigated in the route planning,3 indigenous shrub species(Neosinocalamus affinis,Vitex negundo and Coriaria nepalensis) and 3 indigenous herbaceous species(Setaria viridis,Miscanthus floridulus,Artemisia argyi) were selected.Rainfall simulation experiment was adopted to compare runoff and sediment yields of different combination modes and ratios under constant rainfall intensity(20 mm/min).[Result] Different combination modes under constant rainfall intensity all showed better water and soil conservation effects than that of control group did.For example,runoff appeared 1'-4'05"later,sediment yield reduced by 6.56-33.86 g respectively.Among all combination modes,runoff and sediment yield showed great difference after 20 min of constant rainfall,V.negundo+S.viridis had the lowest runoff(1,700 ml) and sediment yield(60.71 g);C nepalensis+A. argyi had the highest runoff(1,920 ml) and sediment yield(84.02 g).[Conclusion] Given the same planting conditions such as side slope and seeding quantity,and also the same planting techniques,in the hilly areas of central Sichuan Province,the combination of V.negundo and S.viridis can greatly improve the water and soil conservation capacity of highway.展开更多
Floor heave is the most common convergence in gob-side entry retaining.The paper analyzes the form,process and characteristics of gob-side entry retaining with the comprehensive methods of theoretical analysis,numeric...Floor heave is the most common convergence in gob-side entry retaining.The paper analyzes the form,process and characteristics of gob-side entry retaining with the comprehensive methods of theoretical analysis,numerical simulation and the field trial.Research results present that bending and folding floor heave is the main factor in the stage of the first panel mining;squeezing and fluidity floor heave plays a great role in the stable stage of gob-side entry retaining;the combination of the former two factors affects mainly the stage of the second mining ahead;abutment pressure is a fundamental contribution to the serious floor heave of gob-side entry retaining,and sides corners of solid coal body are key part in the case of floor heave controlling of gob-side entry retaining.Floor heave of gob-side entry retaining can be significantly controlled by reinforcing sides and corners of solid coal body,and influence rules on the floor heave of gob side entry retaining of sides supporting strength and the bottom bolt orientation in solid coal side are obtained.Research results have been successfully applied in gob-side entry retaining of G20-F23070 face haulage roadway in #2 coal mine of Pingmei Group,and the field observation shows that the proposed technique is an effective way in controlling the floor heave of gob-side entry retaining.展开更多
Cholecystectomy is a common procedure.Abnormalities in the anatomy of the biliary system are common but an abnormal location of the gallbladder is much rarer.Despite frequent pre-operative imaging,the aberrant locatio...Cholecystectomy is a common procedure.Abnormalities in the anatomy of the biliary system are common but an abnormal location of the gallbladder is much rarer.Despite frequent pre-operative imaging,the aberrant location of the gallbladder is commonly discovered at surgery.This article presents a case of a patient with the gallbladder located to the left of the falciform ligament in the absence of situs inversus totalis that presented with right upper quadrant pain.A laparoscopic cholecystectomy was performed and it was noted that the cystic duct originated from the right side.The presence of a left sided gall bladder is often associated with various biliary,portal venous and other anomalies that might lead to intra-operative injuries.The spectrum of unusual positions and anatomical gallbladder abnormalities is reviewed in order to facilitate elective and emergent cholecystectomy as well as other hepatobiliary procedures.With proper identification of the anatomy,minimally invasive approaches are still considered safe.展开更多
The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the t...The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the thermal cycle in weld zone during double-sided asymmetrical T1G backing welding is investigated. The results show that the workpiece experiences double-peak thermal cycle in double-sided asymmetrical TIG backing welding. On the one hand, the fore arc has the pre- heating effect on the rear pass, and the pre-heating temperature depends on the distance between the double arcs, the heat input of fore arc, and the initial temperature of workpiece. On the other hand, the rear arc has the post-heating effect on the fore pass. The mutual effects of two heat sources decrease with the increase of arc distance.展开更多
The presence of the appendix in an inguinal hernia sac has been referred to as Amyand’s hernia.Vermiform appendix located in an external hernia sac is not an uncommon condition,and the incidence of these cases is app...The presence of the appendix in an inguinal hernia sac has been referred to as Amyand’s hernia.Vermiform appendix located in an external hernia sac is not an uncommon condition,and the incidence of these cases is approximately 1%.In Amyand’s hernias,appendices are frequently found in the hernia sac;but an incarceration particularly on the left side is a very unusual sight.In this report we present 32-year-old male with Amyand’s hernia on the left side.展开更多
Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs ...Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs can be as low as less than 1.0 mΩ(77 K, 10 GHz).Homogenousity of the properties around the plane was studied.Under the measnous distributions.Influences of substrate temperature and Ar and O2 pressures on properties of the double-sided thin films were discussed.展开更多
The effect of reinforcing roof, sides and floor corners to control floor heave of extraction opening was analyzed, It was proved by engineering practice and numerical simulation that reinforcing any part of surroundin...The effect of reinforcing roof, sides and floor corners to control floor heave of extraction opening was analyzed, It was proved by engineering practice and numerical simulation that reinforcing any part of surrounding rock have certainly control effect for floor heave, in the basis of this, the new way that roof, sides and floor corners were rein-forced to control floor heave was put forward. Contrasting control result of reinforcing floor with this, it is determined that reinforcing is more suitable to control floor heave of extrac-tion opening than reinforcing floor when advancing abutment pressure is in some range.展开更多
0 IntroductionLet L = ab be a non-closed smooth arc oriented from a to b, t∈ L, t≠a,b, be the fixed point, andf(t) ∈H. (L) . The usual Hadamard principal value is defined asAbout properties and applications of sing...0 IntroductionLet L = ab be a non-closed smooth arc oriented from a to b, t∈ L, t≠a,b, be the fixed point, andf(t) ∈H. (L) . The usual Hadamard principal value is defined asAbout properties and applications of singular integals of high order were investigated by many authors([1],[2],[3] etc. ) In 1987, the concepts of Hadamard principal value at one-side for singular integralsof high order and the rules of their differentiation are introduced [4]. In this paper we established the rulesof substitution of variable for one-sided Hadamard principal value of singular integrals of high order, andthen, we gave some applications in evaluation of real definite integrals.展开更多
Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation chara...Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation characteristics of gob-side entry driving with narrow coal pillar is analysed, reasonable size of coal pillar and reasonable roadway excavation time after mining are achieved. Surrounding rock control technology and effective roadway side sealing technology are proposed and are taken into field practice. The results showed that a safer and more efficient mining of working face can be achieved. In addition, results of this paper also have important theoretical significance and valuable reference for surrounding rock control technology of gob-side entry driving with narrow coal pillar under special geological condition.展开更多
文摘The automobile industry has been searching for vehicles that use less energy and emit fewer pollutants, which has resulted in a high demand for fuel-efficient vehicles. Because of their higher strength-to-weight ratio compared to traditional steel, using fiber-reinforcement composite materials in automobile bodies has emerged as the most effective strategy for improving fuel efficiency while maintaining safety standards. This research paper examined the utilization of fiber-reinforced composite materials in car bodies to meet the increasing consumer demand for fuel-efficient and eco-friendly vehicles. It particularly focused on a carbon-aramid fiber-reinforced composite impact beam for passenger car side door impact protection. Despite the encouraging prospects of the carbon-aramid fiber-reinforced beam, the research uncovered substantial defects in the fabrication process, resulting in diminished load-bearing capacity and energy absorption. As a result, the beam was un-successful in three-point bending tests. This was accomplished by using an I cross-section design with varying thickness because of the higher area moment of inertia. Vacuum-assisted resin transfer molding (VARTM) manufacturing process was used and the finished beam underwent to three-point bending tests.
文摘The number and creativity of side channel attacks have increased dramatically in recent years. Of particular interest are attacks leveraging power line communication to 1) gather information on power consumption from the victim and 2) exfiltrate data from compromised machines. Attack strategies of this nature on the greater power grid and building infrastructure levels have been shown to be a serious threat. This project further explores this concept of a novel attack vector by creating a new type of penetration testing tool: an USB power adapter capable of remote monitoring of device power consumption and communicating through powerline communications.
文摘利用大型有限元分析软件ANSYS分析了国际热核实验反应堆(ITER)Side校正场线圈(CC)端部三维大圆弧模压成形及释放模具后导体的回弹效应,研究了不同半径成形时导体内外表面的应力、应变的分布及释放模具后导体的回弹规律。设计了1套模压成形模具,通过修模的方式在该套成形模具上进行了不同半径成形试验,测得了不同成形半径时模压成形后的回弹量值。试验结果验证了所建立的有限元分析模型的正确性。有限元分析和试验结果表明:ITERSideCC端部三维大圆弧可通过模压成形达到所需的大半径要求,为ITER Side CC端部三维大圆弧成形提供了一种可行方案。
基金Supported by Key Scientific and Technological Program of National"Eleventh Five-year Plan" (2006BAC01A11)"211 Project"Double-support Program of Sichuan Agricultrual University~~
文摘[Objective] Indigenous plants with favorable water and soil conservation effects were screened for the shrub planting.[Method] Suining-Ziyang-Meishan Highway in the hilly areas of central Sichuan Province was taken for example,through sorting out plant species investigated in the route planning,3 indigenous shrub species(Neosinocalamus affinis,Vitex negundo and Coriaria nepalensis) and 3 indigenous herbaceous species(Setaria viridis,Miscanthus floridulus,Artemisia argyi) were selected.Rainfall simulation experiment was adopted to compare runoff and sediment yields of different combination modes and ratios under constant rainfall intensity(20 mm/min).[Result] Different combination modes under constant rainfall intensity all showed better water and soil conservation effects than that of control group did.For example,runoff appeared 1'-4'05"later,sediment yield reduced by 6.56-33.86 g respectively.Among all combination modes,runoff and sediment yield showed great difference after 20 min of constant rainfall,V.negundo+S.viridis had the lowest runoff(1,700 ml) and sediment yield(60.71 g);C nepalensis+A. argyi had the highest runoff(1,920 ml) and sediment yield(84.02 g).[Conclusion] Given the same planting conditions such as side slope and seeding quantity,and also the same planting techniques,in the hilly areas of central Sichuan Province,the combination of V.negundo and S.viridis can greatly improve the water and soil conservation capacity of highway.
基金provided by the National Natural Science Foundation of China(No.51174195)the State Key Laboratory of Coal Resources and Mine Safety of China University of Mining and Technology(No.SKLCRSM08X04)+1 种基金a foundation for the author of the National Excellent Doctoral Dissertation of China(No.200760)the Science Research Fund of China University of Mining and Technology(No.2008A002)
文摘Floor heave is the most common convergence in gob-side entry retaining.The paper analyzes the form,process and characteristics of gob-side entry retaining with the comprehensive methods of theoretical analysis,numerical simulation and the field trial.Research results present that bending and folding floor heave is the main factor in the stage of the first panel mining;squeezing and fluidity floor heave plays a great role in the stable stage of gob-side entry retaining;the combination of the former two factors affects mainly the stage of the second mining ahead;abutment pressure is a fundamental contribution to the serious floor heave of gob-side entry retaining,and sides corners of solid coal body are key part in the case of floor heave controlling of gob-side entry retaining.Floor heave of gob-side entry retaining can be significantly controlled by reinforcing sides and corners of solid coal body,and influence rules on the floor heave of gob side entry retaining of sides supporting strength and the bottom bolt orientation in solid coal side are obtained.Research results have been successfully applied in gob-side entry retaining of G20-F23070 face haulage roadway in #2 coal mine of Pingmei Group,and the field observation shows that the proposed technique is an effective way in controlling the floor heave of gob-side entry retaining.
文摘Cholecystectomy is a common procedure.Abnormalities in the anatomy of the biliary system are common but an abnormal location of the gallbladder is much rarer.Despite frequent pre-operative imaging,the aberrant location of the gallbladder is commonly discovered at surgery.This article presents a case of a patient with the gallbladder located to the left of the falciform ligament in the absence of situs inversus totalis that presented with right upper quadrant pain.A laparoscopic cholecystectomy was performed and it was noted that the cystic duct originated from the right side.The presence of a left sided gall bladder is often associated with various biliary,portal venous and other anomalies that might lead to intra-operative injuries.The spectrum of unusual positions and anatomical gallbladder abnormalities is reviewed in order to facilitate elective and emergent cholecystectomy as well as other hepatobiliary procedures.With proper identification of the anatomy,minimally invasive approaches are still considered safe.
文摘The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the thermal cycle in weld zone during double-sided asymmetrical T1G backing welding is investigated. The results show that the workpiece experiences double-peak thermal cycle in double-sided asymmetrical TIG backing welding. On the one hand, the fore arc has the pre- heating effect on the rear pass, and the pre-heating temperature depends on the distance between the double arcs, the heat input of fore arc, and the initial temperature of workpiece. On the other hand, the rear arc has the post-heating effect on the fore pass. The mutual effects of two heat sources decrease with the increase of arc distance.
文摘The presence of the appendix in an inguinal hernia sac has been referred to as Amyand’s hernia.Vermiform appendix located in an external hernia sac is not an uncommon condition,and the incidence of these cases is approximately 1%.In Amyand’s hernias,appendices are frequently found in the hernia sac;but an incarceration particularly on the left side is a very unusual sight.In this report we present 32-year-old male with Amyand’s hernia on the left side.
文摘Tc, Jc and Rs properties of large area double sided YBCO thin films deposited on LaAlO3 substrates by direct current sputtering were reported.Film thickness of the obtained thin films is over 300 nm, Tc > 90 K; Rs can be as low as less than 1.0 mΩ(77 K, 10 GHz).Homogenousity of the properties around the plane was studied.Under the measnous distributions.Influences of substrate temperature and Ar and O2 pressures on properties of the double-sided thin films were discussed.
基金Supported by the Natural Science Foundation Project of Hunan(01JJY3020)
文摘The effect of reinforcing roof, sides and floor corners to control floor heave of extraction opening was analyzed, It was proved by engineering practice and numerical simulation that reinforcing any part of surrounding rock have certainly control effect for floor heave, in the basis of this, the new way that roof, sides and floor corners were rein-forced to control floor heave was put forward. Contrasting control result of reinforcing floor with this, it is determined that reinforcing is more suitable to control floor heave of extrac-tion opening than reinforcing floor when advancing abutment pressure is in some range.
文摘0 IntroductionLet L = ab be a non-closed smooth arc oriented from a to b, t∈ L, t≠a,b, be the fixed point, andf(t) ∈H. (L) . The usual Hadamard principal value is defined asAbout properties and applications of singular integals of high order were investigated by many authors([1],[2],[3] etc. ) In 1987, the concepts of Hadamard principal value at one-side for singular integralsof high order and the rules of their differentiation are introduced [4]. In this paper we established the rulesof substitution of variable for one-sided Hadamard principal value of singular integrals of high order, andthen, we gave some applications in evaluation of real definite integrals.
基金Financial support for this work was provided by the National Natural Science Foundation of China(Nos.51474005,51004002)
文摘Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation characteristics of gob-side entry driving with narrow coal pillar is analysed, reasonable size of coal pillar and reasonable roadway excavation time after mining are achieved. Surrounding rock control technology and effective roadway side sealing technology are proposed and are taken into field practice. The results showed that a safer and more efficient mining of working face can be achieved. In addition, results of this paper also have important theoretical significance and valuable reference for surrounding rock control technology of gob-side entry driving with narrow coal pillar under special geological condition.
