The Hongshan porphyry-cryptoexplosive breccia type copper deposit occurs in a metamorphic rock series of the Mesoproterozoic Zhongcun Group. Orebodies are distributed inside and outside porphyry-cryptoexplosive brecci...The Hongshan porphyry-cryptoexplosive breccia type copper deposit occurs in a metamorphic rock series of the Mesoproterozoic Zhongcun Group. Orebodies are distributed inside and outside porphyry-cryptoexplosive breccia pipes. The deposit involves five ore-forming types, i.e the porphyry type, cryptoexplosive breccia type, contact-zone veinlet-disseminated type, in-pipe fracture-zone filling-replacement type and out-of-pipe fracture-zone filling-replacement type, forming an ore-forming system of “five ore-forming types within a single rock body”. Fluid inclusion and isotope geochemical studies indicate the following: S, Pb, O and Sr were derived from the lower crust, Nd was derived from the continental crust or depleted mantle and rare earth elements (REE) and trace elements have the crustal source characters; fluids consist dominantly of formation water, metamorphic water and ***meteoric water with a part of magmatic mater, heat came from porphyry while the latter originated from partial melting caused by shear heating in the lower crust and upper mantle. According to its origin the deposit is classified as the hypabyssal and near-surface, meso- and hypothermal copper deposit associated with the late Yanshanian porphyry-cryptoexplosive breccia.展开更多
Based on the basic geological features of Yixingzhai gold deposit, the geological features, classification and relation to mineralization of breccia pipes were discussed by surveying the xenoliths and breccia's mi...Based on the basic geological features of Yixingzhai gold deposit, the geological features, classification and relation to mineralization of breccia pipes were discussed by surveying the xenoliths and breccia's mineral composition, structure and construction, typical mineralization alteration phenomenon on field and microscopic anatomy in breccia pipes. And the ore-controlling mechanism and the formation mechanism of the blasting breccia pipes were investigated. The main conclusion shows that Hewan and Nanmenshan breccia pipes nearby the NW-striking deep fault are shaped earlier, belonging to the acidic siliceous ingredient production of ultra-hypabyssal magmatic in the late magma stage; Tietangdong and Nanmenshan breccia pipes that are shaped latter are the ultra-hypabyssal auriferous fluid production composed mainly of the skarn in the hydrothermal stage after the magma period. Both root in the unified deep magmatic chamber, belonging to differentiation derivatives at different stages in the deep magmatic chamber.展开更多
Macro-microscopic tectonic analysis and lithologic features show that the gold-bearing breccia bodies in the Shuangwang gold deposit, for hydrofracturing of the deep-sourced and alkali-rich fluids in the Devonian sodi...Macro-microscopic tectonic analysis and lithologic features show that the gold-bearing breccia bodies in the Shuangwang gold deposit, for hydrofracturing of the deep-sourced and alkali-rich fluids in the Devonian sodic rock series, are identified as hydrofracturing breccia bodies. Since the Indosinian, intracontinental collisional orogenesis results in multiple fracturings and magmatic emplacements in the Qinling area. Deep-sourced fluids resulting from deep fractures and granitoid magmatic intrusion are of a supercritical nature. Joint action between the fluid-rock system and structures leads to hydrofracturing and ore formation of the gold deposit. Firstly, the progressive coaxial compression caused the competent sodic rock series and the incompetent pelitic rock series to be deformed and partitioned. Lens-like weak-strain domains are hence formed and distributed at the approximate equidistance zones and the linear strong-strain zones, respectively. Subsequently, the progressive non-coaxial shearing and right-lateral and high-angle oblique thrusting lead to the most developed fracture system in the core of the weak-strain domain to turn from compression to extension and to link up with the deep fracture systems. The periodical huge pressure decline in the pumping center causes the deep-sourced confined fluids to develop periodic tectonic pumping, hydrofracturing and precipitation-healing in the sodic rock series. The gold-bearinghydrofracturing breccia bodies are hence ultimately formed at near-equidistance tectonic lenses. On the basis of the above model, the predicted concealed gold-bearing hydrofracturing breccia bodies have been preliminarily validated by latest drillings.展开更多
The Duocaima carbonate-hosted Pb-Zn deposit is a newly found large deposit in the southern area of Qinghai Province.In this paper, the characteristics, genesis, significance to Pb-Zn mineralization of the widely devel...The Duocaima carbonate-hosted Pb-Zn deposit is a newly found large deposit in the southern area of Qinghai Province.In this paper, the characteristics, genesis, significance to Pb-Zn mineralization of the widely developed breccias, and the ore-forming process have been carefully studied based on geological documentation of drilling holes, microscopic observations of petrography and microstructure and some stable isotope measurements.Based on the compositions of the clast and matrix, the breccias can be classified into three types： limestone clasts cemented by marl; limestone clasts with fine-grained calcareous materials; and limestone clasts cemented by hydrothermal calcite.The mineralization in the first type of breccia is weak, whereas it is strong in the latter two types of breccias.According to the locations of occurrence and structural characteristics of the breccias along with the relationship between the breccias and mineralization, part of the limestone clasts that are cemented by marl and outcrop in the contact zone between the Wudaoliang Formation（Nw） and the underlying Jiushidaoban Formation（Pj） are attributed to synsedimentary fault-genetic breccia, whereas the last of the limestone clasts that are cemented by marl and developed in the Jiushidaoban Formation（Pj） are attributed to the breccia generated by karst cave collapse; the limestone clasts with fine-grained calcareous materials and the limestone clasts cemented by hydrothermal calcite are attributed to breccia formed by hydrothermal dissolution.The breccia formed by karst collapse had consistently evolved for a long period of time, while the breccias with other origins were formed around the period of mineralization（i.e., about or slightly later than 20–16 Ma）.The breccia generated by karst cave collapse and hydrothermal dissolution are somewhat related; the formation of the breccia from karst cave collapse provided open space for the later mineralization and reaction between hydrothermal fluids and host rocks, and the subsequent strong dissolution by hydrothermal fluids transformed some of the breccia formed earlier by karst cave collapse.Meanwhile, carbonate host rocks with breccias and brecciaed mineralization can be a potential sign of Mississippi Valley Type（MVT） deposits and important indicators for regional mineral exploration.The δ13CV-PDB, δ18OVSMOW, and 87Sr/86 Sr values of hydrothermal calcite in the Duocaima deposit range from 4.3‰ to 7.1‰, 14.9‰ to 20.1‰, and 0.707494 to 0.708185, respectively; the δ13CV-PDB, δ18OV-SMOW, and 87Sr/86 Sr values of the host limestones of the Jiushidaoban Formation range from 3.6‰ to 5.3‰, 18.0‰ to 20.5‰, and 0.707372 to 0.707945, respectively.The δ13CV-PDB and 87Sr/86 Sr values of hydrothermal calcite and limestone are similar, indicating single sources of C and Sr in this deposit, with the likely source being the limestone of the Jiushidaoban Formation.The minor scattering of the δ18OV-SMOW values suggests that different O isotope fluids underwent the isotope exchange reaction.The C-O-Sr isotope characteristics indicate that the host limestones experienced a dissolution and precipitation process during mineralization, which is beneficial to improving the porosity of host rocks and promoting the precipitation of metal sulfides.The δ34SV-CDT value of the breccia-type mineralization sulfides ranges from-30.4‰ to-0.3‰; that is, the δ34SV-CDT value is negative with considerable variation, illustrating that during the breccia-type mineralization process, the bacteriogenic reduction of sulfates provided the vast majority of sulfur, whereas the thermochemical reduction of sulfates was relatively unimportant.The brecciation that occurred as a result of karst cave collapse was mainly generated by the dissolution of groundwater; however, the brecciation related to hydrothermal dissolution and mineralization processes were caused by mixing of different fluids.展开更多
The Pulang porphyry copper deposit,located in the Gezan tectonic-magmatic arc and south of the Yidun island arc,southwest of Sanjiang metallogenic belt in Yunnan province,is a super-large porphyry copper deposit.
The Qiyugou explosive breccia type gold deposits of northwestern Songxian, Henan Province is situated at the East Qinling, on the southern margin of the North China Platform.The basement rocks are the Archean Taihua G...The Qiyugou explosive breccia type gold deposits of northwestern Songxian, Henan Province is situated at the East Qinling, on the southern margin of the North China Platform.The basement rocks are the Archean Taihua Group gneisses which were overlaid by the Proterozoic Xionger Group metaandesites. NW-and NE-trending folds and fractures are well developed. Nlagmatism of the Mid-Late Yanshan Epoch led to the formation of the Huashan granite batholith and a variety of acid/alkali dykes, meanwhile more than thirty explosive breccia bodies had been brought about. The most important deposit type is the explosive breccia type represented by the Qiyugou deposit, meanwhile there are structure fracture altered rock type,the goldbearing quartz vein type, as well as porphyry-breccia type. All these types are the terminal products of the evolution and differentiation of the syntectic magma originated from lower crust or upper mantle. They are controlled by a unified structural pattern occurred in the same展开更多
A discovery of daughter minerals in fluid inclusions of Taibai gold deposit, Shaanxi province has been focused on, which is a unique breccia-cemented gold-bearing system. The breccia zone strikes NWW-SEE, occurring in...A discovery of daughter minerals in fluid inclusions of Taibai gold deposit, Shaanxi province has been focused on, which is a unique breccia-cemented gold-bearing system. The breccia zone strikes NWW-SEE, occurring in Devonian strata of Southern Qinling Mountains. The cement is mainly composed of ankerite, pyrite, calcite and quartz, which may be divided into four main tectonic-mineralizing stages. Gold mainly occurs in pyrite and ankerite of stage II and IV. It is found that three types of fluid inclusions can be distinguished: (1) aqueous inclusions (type B); (2) CO2-rich inclusions (type C); (3) daughter minerals-containing inclusions (type A). LRM. (Laser Raman Micro-probe) analyses shows that the content of CO2 occupies 54.4%-70.7% (mole fraction, so as the follows) in vapor phases of different type fluid inclusions. CH4 (5.2%-7.3%) and H2S (6.0%-12.7%) exist in both vapor and liquid phases. Many daughter minerals in fluid inclusions of ankerite and quartz have been found. Several kinds of daughter minerals, including ankerite, pyrite, arsenopyrite and halite, were determined by using SEM (scanning electron microscope)/EDS (energy dispersive spectrometer) technique. EPMA (electron probe micro-analysis) technique was also applied to study the daughter minerals exposed to the surface of polished thin sections.展开更多
Utilizing theories of minerageny and prospecting mineralogy, the authors studied the attitude, morphotype and chemical composition of metallic minerals of pyrite, gold, chalcopyrite, galena and sphalerite, non-metalli...Utilizing theories of minerageny and prospecting mineralogy, the authors studied the attitude, morphotype and chemical composition of metallic minerals of pyrite, gold, chalcopyrite, galena and sphalerite, non-metallic minerals of quartz, carbonate, dolomite and rutile in the Puziwan gold deposit. The study shows the following results. （1） The mineral assemblage is complex and the species of sulfide are abundant with occurrences of sulfosalt minerals. （2） The composition in the minerals is complex and there rich micro elements, including As, Sb, Bi, Se, Te, Au, Ag, Cu, Pb, Zn, and Cr, Ni, V. The typomorphic characteristics of the association of the elements and their specific value suggest that gold mineralization is associated with shallow magmatic hydrothermal activity, the oreforming fluid is the mixture of abundant rising alkali magmatic water originating from the mantle or the lower crust and the descending acid atmospheric water. （3） Ankerite, Fe-rich sphalerite, granular Ti-rich rutile are widely distributed, which indicate great denudation depths, high mineralization temperature. The deposit is found in the middle and shallow positions of the porphyry series. The deep layers are not favorable for gold mineralization. （4） Copper minerals are rich in the ores and sulfides have high content of copper, suggesting possible porphyry-type Cu （Au） mineralization in deep positions and the surrounding areas.展开更多
The superlarge Jinchang gold deposit is located in the joint area between the Taipingling uplift and the Laoheishan depression of the Xingkai Block in both eastern Jilin and eastern Heilongjiang Province. Wall rocks o...The superlarge Jinchang gold deposit is located in the joint area between the Taipingling uplift and the Laoheishan depression of the Xingkai Block in both eastern Jilin and eastern Heilongjiang Province. Wall rocks of the gold deposits are the Neoproterozoic Huangsong Group of metamorphic rocks. Yanshanian magmatism in this region can be divided into 5 phases, the diorite, the graphic granite, the granite, the granite porphyry and the diorite porphyrite, which resulted in the magmatic domes and cryptoexplosive breecia chimney followed by large-scale hydrothermal alteration. Gold mineralization is closely related to the fourth and fifth phase of magmatism. According to the occurrences, gold ores can be subdivided into auriferous pyritized quartz vein, auriferous quartz-pyrite vein, auriferous polymetailic sulfide quartz vein and auriferous pyritized calcite vein. The ages of the gold deposit are ranging from 122.53 to 119.40 Ma. The ore bodies were controlled by a uniform tectono-magmatic hydrothermal alteration system that the ore-forming materials were deep derived from and the ore-forming fluids were dominated by magmatic waters with addition of some atmospheric water in the later phase of mineralization. Gold mineralization took place in an environment of medium to high temperatures and medium pressures. Ore-forming fluids were the K^＋-Na^＋-Ca^2＋-Cl^--SO4^2- type and characterized by medium salinity or a slightly higher, weak alkaline and weak reductive. Au in the ore-forming fluids was transported as complexes of [Au （HS）2]^-, [AuCl2]^-, [Au（CO2）]^- and [Au（HCO3）2]^-. Along with the decline of temperatures and pressures, the ore-forming fluids varied from acidic to weak acidic and then to weak alkaline, which resulted in the dissociation of the complex and finally the precipitation of the gold.展开更多
文摘The Hongshan porphyry-cryptoexplosive breccia type copper deposit occurs in a metamorphic rock series of the Mesoproterozoic Zhongcun Group. Orebodies are distributed inside and outside porphyry-cryptoexplosive breccia pipes. The deposit involves five ore-forming types, i.e the porphyry type, cryptoexplosive breccia type, contact-zone veinlet-disseminated type, in-pipe fracture-zone filling-replacement type and out-of-pipe fracture-zone filling-replacement type, forming an ore-forming system of “five ore-forming types within a single rock body”. Fluid inclusion and isotope geochemical studies indicate the following: S, Pb, O and Sr were derived from the lower crust, Nd was derived from the continental crust or depleted mantle and rare earth elements (REE) and trace elements have the crustal source characters; fluids consist dominantly of formation water, metamorphic water and ***meteoric water with a part of magmatic mater, heat came from porphyry while the latter originated from partial melting caused by shear heating in the lower crust and upper mantle. According to its origin the deposit is classified as the hypabyssal and near-surface, meso- and hypothermal copper deposit associated with the late Yanshanian porphyry-cryptoexplosive breccia.
基金Project(2007CB416608) supported by the Major State Basic Research Development Program of ChinaProject(2006BAB01B07) supported by the National Scientific Project for Tackcling Key Problems
文摘Based on the basic geological features of Yixingzhai gold deposit, the geological features, classification and relation to mineralization of breccia pipes were discussed by surveying the xenoliths and breccia's mineral composition, structure and construction, typical mineralization alteration phenomenon on field and microscopic anatomy in breccia pipes. And the ore-controlling mechanism and the formation mechanism of the blasting breccia pipes were investigated. The main conclusion shows that Hewan and Nanmenshan breccia pipes nearby the NW-striking deep fault are shaped earlier, belonging to the acidic siliceous ingredient production of ultra-hypabyssal magmatic in the late magma stage; Tietangdong and Nanmenshan breccia pipes that are shaped latter are the ultra-hypabyssal auriferous fluid production composed mainly of the skarn in the hydrothermal stage after the magma period. Both root in the unified deep magmatic chamber, belonging to differentiation derivatives at different stages in the deep magmatic chamber.
基金the 305 State Key Sci&Tech Program(Grant No.2003BA612A-06-01)the Key Innovation Oriented Program(GrantNo.KZCX3-SW-137)of the Chinese Academy of Sciences.
文摘Macro-microscopic tectonic analysis and lithologic features show that the gold-bearing breccia bodies in the Shuangwang gold deposit, for hydrofracturing of the deep-sourced and alkali-rich fluids in the Devonian sodic rock series, are identified as hydrofracturing breccia bodies. Since the Indosinian, intracontinental collisional orogenesis results in multiple fracturings and magmatic emplacements in the Qinling area. Deep-sourced fluids resulting from deep fractures and granitoid magmatic intrusion are of a supercritical nature. Joint action between the fluid-rock system and structures leads to hydrofracturing and ore formation of the gold deposit. Firstly, the progressive coaxial compression caused the competent sodic rock series and the incompetent pelitic rock series to be deformed and partitioned. Lens-like weak-strain domains are hence formed and distributed at the approximate equidistance zones and the linear strong-strain zones, respectively. Subsequently, the progressive non-coaxial shearing and right-lateral and high-angle oblique thrusting lead to the most developed fracture system in the core of the weak-strain domain to turn from compression to extension and to link up with the deep fracture systems. The periodical huge pressure decline in the pumping center causes the deep-sourced confined fluids to develop periodic tectonic pumping, hydrofracturing and precipitation-healing in the sodic rock series. The gold-bearinghydrofracturing breccia bodies are hence ultimately formed at near-equidistance tectonic lenses. On the basis of the above model, the predicted concealed gold-bearing hydrofracturing breccia bodies have been preliminarily validated by latest drillings.
基金funded by National Nature Science Foundation of China (41273050, 41320104004)National Key Technology R&D Program in the 11th Five year Plan of China (No.2006 BAB01A08)the Geological Survey Project of China (12120114010301, 1212011220908)
文摘The Duocaima carbonate-hosted Pb-Zn deposit is a newly found large deposit in the southern area of Qinghai Province.In this paper, the characteristics, genesis, significance to Pb-Zn mineralization of the widely developed breccias, and the ore-forming process have been carefully studied based on geological documentation of drilling holes, microscopic observations of petrography and microstructure and some stable isotope measurements.Based on the compositions of the clast and matrix, the breccias can be classified into three types： limestone clasts cemented by marl; limestone clasts with fine-grained calcareous materials; and limestone clasts cemented by hydrothermal calcite.The mineralization in the first type of breccia is weak, whereas it is strong in the latter two types of breccias.According to the locations of occurrence and structural characteristics of the breccias along with the relationship between the breccias and mineralization, part of the limestone clasts that are cemented by marl and outcrop in the contact zone between the Wudaoliang Formation（Nw） and the underlying Jiushidaoban Formation（Pj） are attributed to synsedimentary fault-genetic breccia, whereas the last of the limestone clasts that are cemented by marl and developed in the Jiushidaoban Formation（Pj） are attributed to the breccia generated by karst cave collapse; the limestone clasts with fine-grained calcareous materials and the limestone clasts cemented by hydrothermal calcite are attributed to breccia formed by hydrothermal dissolution.The breccia formed by karst collapse had consistently evolved for a long period of time, while the breccias with other origins were formed around the period of mineralization（i.e., about or slightly later than 20–16 Ma）.The breccia generated by karst cave collapse and hydrothermal dissolution are somewhat related; the formation of the breccia from karst cave collapse provided open space for the later mineralization and reaction between hydrothermal fluids and host rocks, and the subsequent strong dissolution by hydrothermal fluids transformed some of the breccia formed earlier by karst cave collapse.Meanwhile, carbonate host rocks with breccias and brecciaed mineralization can be a potential sign of Mississippi Valley Type（MVT） deposits and important indicators for regional mineral exploration.The δ13CV-PDB, δ18OVSMOW, and 87Sr/86 Sr values of hydrothermal calcite in the Duocaima deposit range from 4.3‰ to 7.1‰, 14.9‰ to 20.1‰, and 0.707494 to 0.708185, respectively; the δ13CV-PDB, δ18OV-SMOW, and 87Sr/86 Sr values of the host limestones of the Jiushidaoban Formation range from 3.6‰ to 5.3‰, 18.0‰ to 20.5‰, and 0.707372 to 0.707945, respectively.The δ13CV-PDB and 87Sr/86 Sr values of hydrothermal calcite and limestone are similar, indicating single sources of C and Sr in this deposit, with the likely source being the limestone of the Jiushidaoban Formation.The minor scattering of the δ18OV-SMOW values suggests that different O isotope fluids underwent the isotope exchange reaction.The C-O-Sr isotope characteristics indicate that the host limestones experienced a dissolution and precipitation process during mineralization, which is beneficial to improving the porosity of host rocks and promoting the precipitation of metal sulfides.The δ34SV-CDT value of the breccia-type mineralization sulfides ranges from-30.4‰ to-0.3‰; that is, the δ34SV-CDT value is negative with considerable variation, illustrating that during the breccia-type mineralization process, the bacteriogenic reduction of sulfates provided the vast majority of sulfur, whereas the thermochemical reduction of sulfates was relatively unimportant.The brecciation that occurred as a result of karst cave collapse was mainly generated by the dissolution of groundwater; however, the brecciation related to hydrothermal dissolution and mineralization processes were caused by mixing of different fluids.
基金granted by China State Mineral Resources Investigation Program (Grant No.12120114013701 and 1212011120608)
文摘The Pulang porphyry copper deposit,located in the Gezan tectonic-magmatic arc and south of the Yidun island arc,southwest of Sanjiang metallogenic belt in Yunnan province,is a super-large porphyry copper deposit.
文摘The Qiyugou explosive breccia type gold deposits of northwestern Songxian, Henan Province is situated at the East Qinling, on the southern margin of the North China Platform.The basement rocks are the Archean Taihua Group gneisses which were overlaid by the Proterozoic Xionger Group metaandesites. NW-and NE-trending folds and fractures are well developed. Nlagmatism of the Mid-Late Yanshan Epoch led to the formation of the Huashan granite batholith and a variety of acid/alkali dykes, meanwhile more than thirty explosive breccia bodies had been brought about. The most important deposit type is the explosive breccia type represented by the Qiyugou deposit, meanwhile there are structure fracture altered rock type,the goldbearing quartz vein type, as well as porphyry-breccia type. All these types are the terminal products of the evolution and differentiation of the syntectic magma originated from lower crust or upper mantle. They are controlled by a unified structural pattern occurred in the same
基金the financial suPPort fromNational NatUral Science Foundation of China(49972031),
文摘A discovery of daughter minerals in fluid inclusions of Taibai gold deposit, Shaanxi province has been focused on, which is a unique breccia-cemented gold-bearing system. The breccia zone strikes NWW-SEE, occurring in Devonian strata of Southern Qinling Mountains. The cement is mainly composed of ankerite, pyrite, calcite and quartz, which may be divided into four main tectonic-mineralizing stages. Gold mainly occurs in pyrite and ankerite of stage II and IV. It is found that three types of fluid inclusions can be distinguished: (1) aqueous inclusions (type B); (2) CO2-rich inclusions (type C); (3) daughter minerals-containing inclusions (type A). LRM. (Laser Raman Micro-probe) analyses shows that the content of CO2 occupies 54.4%-70.7% (mole fraction, so as the follows) in vapor phases of different type fluid inclusions. CH4 (5.2%-7.3%) and H2S (6.0%-12.7%) exist in both vapor and liquid phases. Many daughter minerals in fluid inclusions of ankerite and quartz have been found. Several kinds of daughter minerals, including ankerite, pyrite, arsenopyrite and halite, were determined by using SEM (scanning electron microscope)/EDS (energy dispersive spectrometer) technique. EPMA (electron probe micro-analysis) technique was also applied to study the daughter minerals exposed to the surface of polished thin sections.
文摘Utilizing theories of minerageny and prospecting mineralogy, the authors studied the attitude, morphotype and chemical composition of metallic minerals of pyrite, gold, chalcopyrite, galena and sphalerite, non-metallic minerals of quartz, carbonate, dolomite and rutile in the Puziwan gold deposit. The study shows the following results. （1） The mineral assemblage is complex and the species of sulfide are abundant with occurrences of sulfosalt minerals. （2） The composition in the minerals is complex and there rich micro elements, including As, Sb, Bi, Se, Te, Au, Ag, Cu, Pb, Zn, and Cr, Ni, V. The typomorphic characteristics of the association of the elements and their specific value suggest that gold mineralization is associated with shallow magmatic hydrothermal activity, the oreforming fluid is the mixture of abundant rising alkali magmatic water originating from the mantle or the lower crust and the descending acid atmospheric water. （3） Ankerite, Fe-rich sphalerite, granular Ti-rich rutile are widely distributed, which indicate great denudation depths, high mineralization temperature. The deposit is found in the middle and shallow positions of the porphyry series. The deep layers are not favorable for gold mineralization. （4） Copper minerals are rich in the ores and sulfides have high content of copper, suggesting possible porphyry-type Cu （Au） mineralization in deep positions and the surrounding areas.
文摘The superlarge Jinchang gold deposit is located in the joint area between the Taipingling uplift and the Laoheishan depression of the Xingkai Block in both eastern Jilin and eastern Heilongjiang Province. Wall rocks of the gold deposits are the Neoproterozoic Huangsong Group of metamorphic rocks. Yanshanian magmatism in this region can be divided into 5 phases, the diorite, the graphic granite, the granite, the granite porphyry and the diorite porphyrite, which resulted in the magmatic domes and cryptoexplosive breecia chimney followed by large-scale hydrothermal alteration. Gold mineralization is closely related to the fourth and fifth phase of magmatism. According to the occurrences, gold ores can be subdivided into auriferous pyritized quartz vein, auriferous quartz-pyrite vein, auriferous polymetailic sulfide quartz vein and auriferous pyritized calcite vein. The ages of the gold deposit are ranging from 122.53 to 119.40 Ma. The ore bodies were controlled by a uniform tectono-magmatic hydrothermal alteration system that the ore-forming materials were deep derived from and the ore-forming fluids were dominated by magmatic waters with addition of some atmospheric water in the later phase of mineralization. Gold mineralization took place in an environment of medium to high temperatures and medium pressures. Ore-forming fluids were the K^＋-Na^＋-Ca^2＋-Cl^--SO4^2- type and characterized by medium salinity or a slightly higher, weak alkaline and weak reductive. Au in the ore-forming fluids was transported as complexes of [Au （HS）2]^-, [AuCl2]^-, [Au（CO2）]^- and [Au（HCO3）2]^-. Along with the decline of temperatures and pressures, the ore-forming fluids varied from acidic to weak acidic and then to weak alkaline, which resulted in the dissociation of the complex and finally the precipitation of the gold.
