Discussion on Optimization Measures of Building Construction Management Technology

Building construction needs have expanded in line with people's demands and the quality of life in today’s society.Therefore,the traditional construction management technology can no longer meet the current management and construction requirements,so it is necessary to further optimize the construction management technology.Therefore,this paper focuses on exploring measures regarding building construction technology optimization.Firstly,the paper briefly expounds its optimization value,then systematically analyzes some problems faced by the current housing construction management,and finally puts forward some targeted management optimization measures for future reference.

Study of the Application of Expansive Cement in Building Construction

A China’s construction industry continues to develop,the amount of building construction has increased significantly,and construction technology has been continuously advancing.In particular,the application of expansive cement in building construction is becoming more popular.The correct use of construction technologies can not only speed up the progress of the construction project,but also reduce the project cost significantly.In this paper,the application of expansive cement building construction is discussed in detail,and the solutions of related problems are proposed.

Analysis of Building Construction Quality Control and Safety Management

Quality control and safety management are two very important contents in building construction project management.Once the construction quality is not up to standard or a safety accident occurs,the economic benefits of the project will be severely impacted.However,there are still some problems in the quality and safety management of the project.In this paper the problems in construction quality control and safety management are analyzed,and effective countermeasures are put forward,in hopes to help improve construction quality and safety.

Decay rates and time lags of heat conduction in building construction under field conditions

The field measurements of decay rates and time lags of heat conduction in a building construction taken in Nanjing during the summer of 2001 are presented.The decay rates and time lags are calculated according to the frequency responses of the heat absorbed by the room＇s internal surfaces,inside surface temperature,indoor air temperature and outdoor synthetic temperature.The measured results match very well with the theoretical results of the zeroth and the first order values of the decay rates and time lags of heat conduction in the building construction,but the difference between the measured values and the theoretical values for the second order is too great to be accepted.It is therefore difficult to accurately test the second order value.However,it is still advisable to complete the analysis using the zeroth-and the first-orders values of the decay rates and time lags of heat conduction in building construction under field conditions,because in these cases the decay rates of heat conduction reach twenty which meets the requirements of engineering plans.

A study of some Egyptian carbonate rocks for the building construction industry

A number of geotechnical analyses were carried out on selected carbonate rock samples from eight sites located in Egypt. This analysis was to assess the suitability of these rocks for building construction aggregate. The analyses included properties of uniaxial compressive strength, tensile strength, porosity, water absorption, and dynamic fragmentation. The success of building construction depends to a large extent on the availability of raw materials at affordable prices. Raw materials commonly used in the building industry include sands, gravels, clays and clay-derived products. Despite the widespread occurrence of carbonate rocks throughout Egypt, the low premium placed on their direct application in the building sector may be explained in two ways: firstly, the lack of awareness of the potential uses of carbonate rocks in the building construction industry(beyond the production of asbestos, ceiling boards, roof sheets and Portland cement); and secondly, the aesthetic application of carbonate rocks in the building construction depends mainly on their physical attributes, a knowledge of which is generally restricted to within the confines of research laboratories and industries. Thus this paper addresses the physical and mechanical characteristics of some Egyptian carbonate rocks, evaluating them for their suitability as building construction aggregates.

Development of a Fuzzy Fire Risk Evaluation Model for Building Construction Sites in Hong Kong

Earlier research works on fire risk evaluation indicated that an objective,reliable,comprehensive,and practical fire risk evaluation model is essential for mitigating fire occurrence in building construction sites.Nevertheless,real empirical studies in this research area are quite limited.This journal paper gives an account of the second stage of a research study aiming at developing a fuzzy fire risk evaluation model for building construction sites in Hong Kong.The empirical research findings showed that the overall fire risk level of building construction sites is 3.6427,which can be interpreted as“moderate risk”.Also,the survey respondents perceived that“Restrictions for On-Site Personnel”is the most vital fire risk factor;with“Storage of Flammable Liquids or Dangerous Goods”being the second;and“Attitude of Main Contractor”the third.The proposed fuzzy fire risk evaluation model for building construction sites can be used to assess the overall fire risk level for a building construction site,and to identify improvement areas needed.Although the fuzzy fire risk evaluation model was developed domestically in Hong Kong,the research could be reproduced in other nations to develop similar models for international comparisons.Such an extension would provide a deeper understanding of the fire risk management on building construction sites.

Exploring the Path of Party Building Leading League Construction in Colleges and Universities under the Pattern of Great Ideological and Political Education

In accordance with the pattern of"great ideology and politics",the Party and youth League organizations assume the role of vanguard in the organization of colleges and universities.Simultaneously,they serve as a pivotal force in ideological and political education.In order to construct a comprehensive ideological and political framework encompassing the entire educational process,it is of paramount importance to identify an efficacious methodology for Party building leading League construction.This paper employs a comprehensive analysis to elucidate the pivotal role of Party building leading League construction in facilitating ideological and political education.It also illuminates the practical challenges encountered in the implementation of Party building leading League construction initiatives within colleges and universities.The article proposes a specific path for Party building leading League construction in colleges and universities based on three key aspects:cohesion of the consensus of Party building leading League building,establishment of the institutional system of Party building leading League construction,and creation of the model brand of Party building leading League construction.The aim is to promote in-depth development of Party building in colleges and universities and enhance the quality and effect of ideological and political education.

Wireless Sensor Networks for Resources Tracking at Building Construction Sites

We evaluate the technical feasibility of applying emerging wireless network technologies for resources tracking at building construction sites. We first identify practical constraints in solving resource-tracking problems in an enclosed or partially covered environment. We then compare pros and cons of available localization principles and examine the latest wireless communication technologies, including Wi-Fi, Bluetooth, Ultra-Wideband (UWB) and ZigBee. We find that the ZigBee-based wireless sensor network and the received signal strength indicator (RSSI) localization method are most promising to tackle on-site tracking of construction resources. Finally, we anticipate some application challenges associated with deploying wireless sensor networks for resources tracking in the practical context.

Research on Systematic Analysis and Countermeasures of the Buildings Construction Safety Problems

The buildings construction safety problems contain various safety-hidden dangers that caused by the human unsafe behaviors, the substance unsafe conditions, operation environment unsafe factors and management defects. The authors summarize comprehensively the problems of buildings construetion safety in China at present based on grasping the whole safety status of buildings construction, and the synthetic countermeasures including the systems about laws, management, technology and education civilization for buildings construction safety management are brought up based on the viewpoint of safety system theory. Then it is thought that huilding scientific management mechanisms and popularizing effective management methods and measures are the fundamental ways for improving further the level of safety management for buildings construction in China at present.

High Strength Low Alloy (HSLA) Steels in Building Construction

Majority of the buildings,including industrial buildings,are constructed using either structural steel (plates and structural shapes) or deformed bar steel reinforced concrete.Such buildings,however,must be designed to be safe and serviceable during construction and during use and occupancy.These objectives can be easily achieved by the use of steels having superior mechanical properties,ductility,weldability,fire resistance,etc.Over the years,the steel industry has made improvements in steel making technologies resulting in high strength low alloy (HSLA) steels with superior steel properties well suited for building construction.First part of this paper presents the structural design considerations,and the constructional considerations associated with the building structures in general,and steel structures in particular.This second part of the paper looks at the acceptance criteria for HSLA steels for North American building codes and construction.The third part of the paper presents the structural properties of currently available HSLA steels for building construction.The discussion focuses on hot-rolled structural steel shapes as well as deformed steel bars for concrete reinforcement.The paper argues that Niobium microalloying is the key to achieving superior properties in such steels.

An Intelligent Optimization Method of Reinforcing Bar Cutting for Construction Site

To meet the requirements of specifications,intelligent optimization of steel bar blanking can improve resource utilization and promote the intelligent development of sustainable construction.As one of the most important building materials in construction engineering,reinforcing bars(rebar)account for more than 30%of the cost in civil engineering.A significant amount of cutting waste is generated during the construction phase.Excessive cutting waste increases construction costs and generates a considerable amount of CO_(2)emission.This study aimed to develop an optimization algorithm for steel bar blanking that can be used in the intelligent optimization of steel bar engineering to realize sustainable construction.In the proposed algorithm,the integer linear programming algorithm was applied to solve the problem.It was combined with the statistical method,a greedy strategy was introduced,and a method for determining the dynamic critical threshold was developed to ensure the accuracy of large-scale data calculation.The proposed algorithm was verified through a case study;the results confirmed that the rebar loss rate of the proposed method was reduced by 9.124%compared with that of traditional distributed processing of steel bars,reducing CO_(2)emissions and saving construction costs.As the scale of a project increases,the calculation quality of the optimization algorithmfor steel bar blanking proposed also increases,while maintaining high calculation efficiency.When the results of this study are applied in practice,they can be used as a sustainable foundation for building informatization and intelligent development.

Analysis on Pore-Forming Pouring Pile Construction Technology of House Building Project

Compared with the in-place pile, the pore-forming pouring pile is more simple and convenient, with a wider range of construction. In the actual construction process, it is able to pass through complex bottom layer and water layer underground without very high requirements in equipment. The actual bearing capacity of single pile is very strong, so that it can be better to adapt to the actual needs of different scales or the different geological conditions in building. And it has been promoted and used greatly in building construction work [1]. This paper introduces the concept of the pore-forming pouring pile technology, analyzes the pore-forming construction technology and the pile construction technology, then talks about prevention problems of the pore-forming pouring pile construction in House Building Project, at last draws a conclusion that the pore-forming pouring pile technology is the most basic construction technology and is the most effective and convenient way of construction.

Evaluation of Common Delay Causes of Construction Projects in Singapore

The objectives of this paper were to identify and evaluating the common delay factors among owners, consultants and main contractors in building projects in Singapore. The interview and questionnaire method were used in this research. Randomly distributed questionnaire technique was applied to select samples of 74 various construction practitioners consisting of owners, consultants and main contractors to evaluat the severity of the 35 identified delay factors. The project investigated in this study included residential building and office building projects. The results found that delay in progress payment by owner, adverse weather conditions, main contractor financial problems, evaluation of completed works and act of god factor caused mostly severe delay in building construction project.

Design influence for the success of construction projects

In this thesis, the design in construction management is defined as the design meets the requirements of the constructor. There are a range of definitions of design, but in this paper ＂design＂ refers to something, which has been planned and made and a pattern for decorating in something in the term of construction. Rumane says （2010）the design involves two processes. The first thing is analyzing and designing components and structure on the basis of recognized codes and standards of safety. The other is that designers conduct the information in the form

FIDIC new conditions of contract and their applying prospects for the construction industry in China

In this paper, the author gives a brief introduction to the evolution of FIDIC conditions of contract, particularly the background of the 1999 new editions. A detailed discussion is made of the applying prospects referring to the new editions of FIDIC Conditions of Contract in China in 6 aspects: revisions of the existing model contract forms; finding solutions to the payment delay problem; advocating the Design/Build and EPC turnkey project delivery system; clarifying the roles of supervising engineers and opening up the new regions of their work. This paper also prepares a short form model contract for small projects in China, improving the settlement of construction disputes.

Preference for Wood and Plastic-Based Ceiling Panels by Homeowners in Ghana： Implications for Tropical Forests Conservation and Prospects for the Local Wood Industry

This study investigated the preference for wood and plastic-based ceiling panels by homeowners in Ghana, the implications for the conservation of tropical forests and prospects for the local wood processing industry. Questionnaire was used to solicit information from 758 homeowners sampled from three cities in Ghana. The results showed that even though wood-based panels continue to enjoy strong patronage among home owners plastic-based panels appear to be the future material for ceiling. The findings suggest that, by 2030, homeowners in Ghana will use more plastic-based ceiling panels than wood-based panels, ceteris paribus. Attractiveness, durability and pleasantness are the key attributes of plastics that influence homeowners＇ decision to patronize the material. Additionally, the concern about the depletion of forest resources in Ghana has shaped homeowners decision to patronize plastic-based ceiling panels. While the shift to the use of plastic-based panels has the potential to moderate the consumption levels of timber and therefore could contribute to the conservation of tropical forests, it has a negative implication on the development of local wood processing industry. One area where manufacturers of wood products such as wood panels can explore in order to increase or maintain the market share of wood-based panel products is sourcing raw timber from certified forests.

Ecological conservation, remediation and construction for building an ecological civilization in China: concepts for ecological activity

This paper explains and discusses the concepts of ecological conservation and construction in China in three parts. The first part provides a brief description of the historical background of ecological activities in China and their major achievements in the past. The second part is a comprehensive review of various types of ecological control activity aimed at the improvement of natural and artificially established ecosystems at the landscape,regional(watershed) and higher levels. The scope of and differences between some ecological terms used in China such as ecological protection, conservation, remediation(rehabilitation), restoration as well as the reestablishment of new ecosystems are elaborated. The review suggests that the term "ecological conservation and construction"should be used to embrace all types of ecological control activity in China. Finally, five guidelines are proposed for promoting the implementation of ecological conservation and construction in China based on the two important governmental documents related to the development of ecological civilization in China.

View of Resuscitation for Wood Construction Building in China

The paper briefly retrospected the history of wood construction building in China, thenparticularly discussed the great significance, wood supply, safety problem and cost of woodconstruction building after recovery. Furthermore, some advice was put forward, and finally thedevelopment foreground was in prospect.