Ablation behaviour and mechanical performance of ZrB_(2)-ZrC-SiC modified carbon/carbon composites prepared by vacuum infiltration combined with reactive melt infiltration

The development of advanced aircraft relies on high performance thermal-structural materials,and carbon/carbon com-posites(C/C)composited with ultrahigh-temperature ceramics are ideal candidates.However,the traditional routes of compositing are either inefficient and expensive or lead to a non-uniform distribution of ceramics in the matrix.Compared with the traditional C/C-ZrC-SiC composites prepared by the reactive melt infiltration of ZrSi_(2),C/C-ZrB_(2)-ZrC-SiC composites prepared by the vacuum infiltration of ZrB_(2) combined with reactive melt infiltration have the higher content and more uniform distribution of the introduced ceramic phases.The mass and linear ablation rates of the C/C-ZrB_(2)-ZrC-SiC composites were respectively 68.9%and 29.7%lower than those of C/C-ZrC-SiC composites prepared by reactive melt infiltration.The ablation performance was improved because the volatilization of B_(2)O_(3),removes some of the heat,and the more uniformly distributed ZrO_(2),that helps produce a ZrO2-SiO2 continu-ous protective layer,hinders oxygen infiltration and decreases ablation.

Lignite-Based Hierarchical Porous C/SiO_(x)Composites as High-Performance Anode for Potassium-Ion Batteries

Silicon oxide(SiO_(x),0<x≤2)has been recognized as a prominent anode material in lithium-ion batteries and sodium-ion batteries due to its high theoretical capacity,suitable electrochemical potential,and earth abundance.However,it is intrinsically poor electronic conductivity and excessive volume expansion during potassiation/depotassiation process hinder its application in potassium-ion batteries.Herein,we reported a hierarchical porous C/SiO_(x)potassium-ion batteries anode using lignite as raw material via a one-step carbonization and activation method.The amorphous C skeleton around SiO_(x)particles can effectively buffer the volume expansion,and improve the ionic/electronic conductivity and structural integrity,achieving outstanding rate capability and cyclability.As expected,the obtained C/SiO_(x)composite delivers a superb specific capacity of 370 mAh g^(-1)at 0.1 A g^(-1)after 100 cycles as well as a highly reversible capacity of 208 mAh g^(-1)after 1200 cycles at 1.0 A g^(-1).Moreover,the potassium ion storage mechanism of C/SiO_(x)electrodes was investigated by ex-situ X-ray diffraction and transmission electron microscopy,revealing the formation of reversible products of K_(6.8)Si_(45.3)and K_(4)SiO_(4),accompanied by generation of irreversible K2O after the first cycle.This work sheds light on designing low-cost Si-based anode materials for high-performance potassium-ion batteries and beyond.

Experimental Investigation of the Anisotropic Thermal Conductivity of C/SiC Composite Thin Slab

Fiber-reinforced composites possess anisotropic mechanical and heat transfer properties due to their anisotropic fibers and structure distribution.In C/Si C composites,the out-of-plane thermal conductivity has mainly been studied,whereas the in-plane thermal conductivity has received less attention due to their limited thickness.

Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiC_p Hybrid Reinforced 6061 Aluminum Matrix Composites

The performance of solid solution aging treatment on aluminum matrix composites prepared by powder metallurgy and reinforced with 6061 aluminum alloy powder as matrix;meanwhile, nano silicon carbide particles(nm Si Cp), submicron silicon carbide particles(1 μm Si Cp) and Ti particles were studied. The Al/Si Cp composite powder was prepared by high-energy ball milling, and then cold-pressed, sintered, hotextruded, and then heat-treated with different solution temperatures and aging times for the extruded composites. Optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy(EDS), X-ray diffractometer(XRD) and extrusion testing were used to analyze and test the microstructure and mechanical properties of aluminum matrix composites. The results show that after the multi-stage solid solution at 530 ℃×2 h+535 ℃×2 h+540 ℃×2 h, the particles are mainly equiaxed grains and uniformly distributed. There is no reinforcement agglomeration, and the surface is dense and the insoluble phase is basically dissolved. In the matrix, the strengthening effect is good, and the hardness and compressive strength are 179.43 HV and 680.42 MPa, respectively. Under this solution process, when the aluminum matrix composites are aged at 170 ℃ for 10 h, the hardness and compressive strength can reach their peaks and increase to 195.82 HV and 721.48 MPa, respectively.

Multi-scale Modeling and Finite Element Analyses of Thermal Conductivity of 3D C/SiC Composites Fabricating by Flexible-Oriented Woven Process

Thermal conductivity is one of the most significant criterion of three-dimensional carbon fiber-reinforced SiC matrix composites(3D C/SiC).Represent volume element(RVE)models of microscale,void/matrix and mesoscale proposed in this work are used to simulate the thermal conductivity behaviors of the 3D C/SiC composites.An entirely new process is introduced to weave the preform with three-dimensional orthogonal architecture.The 3D steady-state analysis step is created for assessing the thermal conductivity behaviors of the composites by applying periodic temperature boundary conditions.Three RVE models of cuboid,hexagonal and fiber random distribution are respectively developed to comparatively study the influence of fiber package pattern on the thermal conductivities at the microscale.Besides,the effect of void morphology on the thermal conductivity of the matrix is analyzed by the void/matrix models.The prediction results at the mesoscale correspond closely to the experimental values.The effect of the porosities and fiber volume fractions on the thermal conductivities is also taken into consideration.The multi-scale models mentioned in this paper can be used to predict the thermal conductivity behaviors of other composites with complex structures.

Designing Symmetric Gradient Honeycomb Structures with Carbon‑Coated Iron‑Based Composites for High‑Efficiency Microwave Absorption

The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.

C反应蛋白/白蛋白比值对2型糖尿病合并急性心肌梗死患者远期不良心脑血管事件的预测价值研究

背景急性心肌梗死(AMI)是威胁全球公众健康的主要原因之一。虽然已有相应的再灌注治疗策略,但AMI相关的主要不良心脑血管事件(MACCEs)仍然是全世界人口死亡的原因之一。尤其合并糖尿病的AMI患者,因冠状动脉病变复杂,病变程度严重,尽早发现和判断该部分患者远期预后相对困难,因此寻找相对简便、易获得的实验室指标,有利于为2型糖尿病(T2DM)合并AMI患者经皮冠状动脉介入(PCI)术后MACCEs的预测提供依据。目的探讨血清C反应蛋白(CRP)/白蛋白(Alb)比值(CAR)对T2DM合并AMI患者PCI术后远期MACCEs的预测价值。方法纳入2014—2019年就诊于宁夏医科大学总医院心血管内科1683例T2DM合并AMI患者为研究对象,收集患者的一般临床资料与检查结果。对所有患者进行电话或门诊随访,以全因死亡、非致死性心肌梗死、再发不稳定型心绞痛、非致死性脑卒中、新发心力衰竭或心力衰竭加重再入院、再次血运重建作为MACCEs。根据患者随访期间是否发生MACCEs分为MACCEs组(508例)和非MACCEs组(1175例)。采用单因素及多因素Logistic回归分析探讨T2DM合并AMI患者MACCEs事件的影响因素。采用Kaplan-Meier法绘制患者的生存曲线,生存曲线的比较采用Log-rank检验。采用受试者工作特征(ROC)曲线分析CAR对T2DM合并AMI患者远期发生MACCEs的预测效能,使用净重分类改善指标(NRI)和综合判别指数(IDI)评价CAR对T2DM合并AMI患者预后评估的改善效果。结果1683例患者中508例(30.18%)患者发生MACCEs。多因素Logistic回归分析显示高血压病[OR(95%CI)=1.994(1.142~3.483)]、冠状动脉植入支架长度[OR(95%CI)=1.031(1.002~1.062)]、CRP[OR(95%CI)=0.950(0.915~0.986)]、Alb[OR(95%CI)=0.933(0.880~0.989)]及CAR[OR(95%CI)=5.582(1.705~18.277)]是T2DM合并AMI患者PCI术后发生MACCEs的影响因素(P<0.05)。根据CAR中位表达水平(0.86),将患者分为CAR<0.86组和CAR≥0.86组,Log-rank检验结果显示,CAR≥0.86组MACCEs发生率高于CAR<0.86组(52.68%与22.92%;χ^(2)=65.65,P<0.001)。ROC曲线显示CAR预测T2DM合并AMI患者发生MACCEs的ROC曲线下面积为0.728(95%CI=0.702~0.754),最佳截断值为0.576,灵敏度为0.617,特异度为0.747。在基线模型基础上,与CRP、Alb相比,CAR能明显改善对患者发生MACCEs的预测效果(NRI=0.377,IDI=0.166,C指数=0.690;P<0.05)。结论CAR是T2DM合并AMI患者PCI术后远期MACCEs发生风险的有效预测指标。

Bending properties and fracture mechanism of C/C composites with high density preform

C/C composites with banded structure pyrocarbon were fabricated by fast chemical vapor infiltration（CVI）,with C3H6 as carbon source,N2 as carrier gas,and three-dimensional（3D） 12K PAN-based carbon fabric with high density of 0.94 g/cm3 as preform.Experimental results indicated that the fracture characteristics of C/C composites were closely related to the frequency of high-temperature treatment（HTT） at the break of CVI process.According to the load？displacement curves,C/C composites showed a pseudoplastic fracture after twice of HTT.After three times of HTT,load？displacement curves tended to be stable with a decreasing bending strength at 177.5 MPa.Delamination failure and intrastratal fiber fracture were observed at the cross-section of C/C composites by scanning electronic microscope.Because the content of pyrocarbon and fibers has a different distribution in layers,the C/C composites show different fracture characteristics at various regions,which leads to good toughness and bending strength.

Anti-oxidation properties of ZrB_2 modified silicon-based multilayer coating for carbon/carbon composites at high temperatures

To improve the anti-oxidation ability of silicon-based coating for carbon/carbon （C/C） composites at high temperatures, a ZrB2 modified silicon-based multilayer oxidation protective coating was prepared by pack cementation. The phase composition, microstructure and oxidation resistance at 1773, 1873 and 1953 K in air were investigated. The prepared coating exhibits dense structure and good oxidation protective ability. Due to the formation of stable ZrSiO4-SiO2 compound, the coating can effectively protect C/C composites from oxidation at 1773 K for more than 550 h. The anti-oxidation performance decreases with the increase of oxidation temperature. The mass loss of coated sample is 2.44% after oxidation at 1953 K for 50 h, which is attributed to the decomposition of ZrSiO4 and the volatilization of SiO2 protection layer.

C/SiC/MoSi_2-SiC-Si multilayer coating for oxidation protection of carbon/carbon composites

C/SiC/MoSi2-SiC-Si oxidation protective multilayer coating for carbon/carbon （C/C） composites was prepared by pack cementation and slurry method. The microstructure, element distribution and phase composition of the as-received coating were analyzed by scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDS） and X-ray diffraction （XRD）. The results show that the multilayer coating was composed of MoSi2, SiC and Si. It could effectively protect C/C composites against oxidation for 200 h with the mass loss of 3.25% at 1873 K in static air. The mass loss of the coated C/C composites results from the volatilization of SiO2 and the formation of cracks and bubble holes in the coating.

Influence of heat-treatment on oxidation-resistance of phosphate-coating for C/C composite

Phosphate-coating was prepared for C/C composite using liquid-impregnation and different heat-treatment. The results show that the mass-loss rate of sample A with 1-2 ℃/min slow-cooling rate technology is 47%after oxidation at 700 ℃ for 20 h, while that of sample B with air-fast-cooling one is only 0.98%. SEM images reveal that the coating of sample A is full of micro-holes, micro-cracks and many piece-like crystal particles, while that of sample B is integrated and compacted in glassy state with a few of micro-cracks. The coating of sample A is almost exhausted only in 8 h oxidized-test at 700 ℃, while that of sample B remains integrated after 8 h test at 700 ℃ and becomes loose due to much small pores generated after 20 h test at 700 ℃.

Characterization of SiC nanowires prepared on C/C composite without catalyst by CVD

SiC nanowires were prepared on C/C composite surface without catalyst by chemical vapor deposition（CVD） using CH3 SiCl3 as precursor.SEM images of the CVD-product reveal that some long nanowires have grown to tens of micrometers with some gathered as a ball.Some short nanowires agglomerate like chestnut shell with many thorns accompanied by some deposited nano-particles.XRD,Raman-spectrum and FTIR patterns indicate that the product is a typical β-SiC.TEM images show that the nanowires have a wide diameter range from 10 to 100 nm,and some thin nanowires are bonded to the thick one by amorphous CVD-SiC.A SiC branch generates from an amorphous section of a thick one with an angle of 70° between them,which is consistent with the [111] axis stacking angle of the crystal.SAED and fast Fourier transform（FFT） patterns reveal that the nanowires can grow along with different axes,and the bamboo-nodes section is full of stacking faults and twin crystal.The twisted SiC lattice planes reveal that the screw dislocation growth is the main mechanism for the CVD-SiC nanowires.

Effect of ZrC-SiC content on microstructure and ablation properties of C/C composites

C/C-ZrC-SiC composites with different ZrC-SiC contents were fabricated by precursor infiltration and pyrolysis. The effect of ceramic content on the microstructure and ablation resistance was investigated. Both the C/C-SiC and C/C-ZrC-SiC composites exhibited good ablation resistance under the plasma flame above 2300℃. Withtheincreaseof ZrC content, a continuous oxide layer and a solid Zr-Si-O mesophase were formed during the ablation. And the structure of the formed oxides layer closely linked with the contents of ZrC-SiC ceramics. The solid ZrO2-ZrC and Zr-Si-O mesophase could increase the viscosity of SiO2 moderately and improve the anti-scouring ability. The continuous SiO2-ZrO2-ZrC-SiC layer would serve as a thermal and oxygen barrier for preventing the substratefrom further ablation. The C/C-ZrC-SiC composites with 27.2%ZrC and 7.56%SiC shows superior ablation resistance, and the mass and linear ablation rates are-3.51 mg/s and-1.88 μm/s, respectively.

Oxidation behavior of C/C composites with SiC/ZrSiO_4-SiO_2 coating

A SiC/ZrSiO4？SiO2 （SZS） coating was successfully fabricated on the carbon/carbon （C/C） composites by pack cementation, slurry painting and sintering to improve the anti-oxidation property and thermal shock resistance. The anti-oxidation properties under different oxygen partial pressures （OPP） and thermal shock resistance of the SZS coating were investigated. The results show that the SZS coated sample under low OPP, corresponding to the ambient air, during isothermal oxidation was 0.54% in mass gain after 111 h oxidation at 1500 ° C and less than 0.03% in mass loss after 50 h oxidation in high OPP, corresponding to the air flow rate of 36 L/h. Additionally, the residual compressive strengths （RCS） of the SZS coated samples after oxidation for 50 h in high OPP and 80 h in low OPP remain about 70% and 72.5% of those of original C/C samples, respectively. Moreover, the mass loss of SZS coated samples subjected to the thermal cycle from 1500 ° C in high OPP to boiling water for 30 times was merely 1.61%.

Effect of specific pressure on fabrication of 2D-C_f/Al composite by vacuum and pressure infiltration

Carbon fiber reinforced aluminum matrix （Cf/Al） composite has many excellent properties, and it has received more and more attention. Two-dimensional （2D） Cf/Al composites were fabricated by vacuum and pressure infiltration, which was an integrated technique and could provide high vacuum and high infiltration pressure. The effect of specific pressure on the infiltration quality of the obtained composites was comparatively evaluated through microstructure observation. The experimental results show that satisfied Cf/Al composites could be fabricated at the specific pressure of 75 MPa. In this case, the preform was infiltrated much more completely by aluminum alloy liquid, and the residual porosity was seldom found. It is found that the ultimate tensile strength of the obtained Cf/Al composite reached maximum at the specific pressure of 75 MPa, which was improved by 138.9% compared with that of matrix alloy.

Flexural destructive process of unidirectional carbon/carbon composites reinforced with in situ grown carbon nanofibers

Unidirectional carbon/carbon（C/C） composites modified with in situ grown carbon nanofibers（CNFs） were prepared by catalysis chemical vapor deposition. The effect of in situ grown CNFs on the flexural properties of the C/C composites was investigated by detailed analyses of destructive process. The results show that there is a sharp increase in the flexural load-displacement curve in the axial direction of the CNF-C/C composites, followed by a serrated yielding phenomenon similar to the plastic materials. The failure mode of the C/C composites modified with in situ grown CNFs is changed from the pull-out of single fiber to the breaking of fiber bundles. The existence of interfacial layer composed by middle-textured pyrocarbon, CNFs and high-textured pyrocarbon can block the crack propagation and change the propagation direction of the main crack, which leads to the higher flexural strength and modulus of C/C composites.

Effect of stress level on fatigue behavior of 2D C/C composites

Laminated carbon fiber clothes were infiltrated to prepare carbon fiber reinforced pyrolytic carbon （C/C） using isothermal chemical vapor infiltration （CVI）. The bending fatigue behavior of the infiltrated C/C composites was tested under two different stress levels. The residual strength and modulus of all fatigued samples were tested to investigate the effect of maximum stress level on fatigue behavior of C/C composites. The microstructure and damage mechanism were also investigated. The results showed that the residual strength and modulus of fatigued samples were improved. High stress level is more effective to increase the modulus. And for the increase of flexural strength, high stress level is more effective only in low cycles. The fatigue loading weakens the bonding between the matrix and fiber, and then affects the damage propagation pathway, and increases the energy consumption. So the properties of C/C composites are improved.

Pyrolysis mechanism of ZrC precursor and fabrication of C/C-ZrC composites by precursor infiltration and pyrolysis

C/C-ZrC composites were prepared by precursor infiltration and pyrolysis using the organic zirconium as precursor.The conversion mechanisms of the precursors such as the thermal behavior,structural evolution,phase composition,microstructure,composition of the precursors and products were analyzed by thermal gravimetric analyzer,Fourier transform infrared spectrometer,X-ray diffraction and scanning electron microscope.The results indicate that the ZrC precursor transforms to inorganic ZrO2 from room temperature to 1200 ℃,then reduces to ZrC at 1600 ℃ through the carbothermal reduction reaction.The microstructure of the C/C-ZrC composites was also investigated.The composites exhibit an interesting structure,a coating composed of ZrC ceramic covers the exterior of the composite,and the ZrC ceramic is embedded in the pores of the matrix inside the composite.

SR9009联合吲哚丙酸通过核因子κB信号通路减轻C2C12成肌细胞的炎症反应

背景:钟基因Rev-erbα参与调节炎症,但激活Rev-erbα会增加心脑血管疾病风险。为降低相关风险,探索Rev-erbα激动剂SR9009联合其他药物来减轻骨骼肌成肌细胞炎症,奠定治疗炎症相关性骨骼肌萎缩的理论基础。目的:探讨脂多糖刺激C2C12成肌细胞时吲哚丙酸、SR9009与核因子κB信号通路的关系。方法:①1μg/mL脂多糖刺激C2C12成肌细胞,RNA转录组测序结合KEGG通路富集分析信号通路。②CCK-8法检测C2C12成肌细胞活性,筛选吲哚丙酸的最佳给药浓度;然后将细胞分为空白对照组、脂多糖(1μg/mL)组、SR9009(10μmol/L)+脂多糖组、吲哚丙酸(80μmol/L)+脂多糖组、吲哚丙酸+SR9009+脂多糖组,ELISA检测细胞上清液中白细胞介素6水平,RT-qPCR检测白细胞介素6、肿瘤坏死因子α、Toll样受体4、CD14 mRNA表达,Western blot检测NF-κB p65、p-NF-κB p65蛋白表达。③siRNA敲减Rev-erbα,RT-qPCR评估敲减效率,检测白细胞介素6、肿瘤坏死因子αmRNA表达。结果与结论:①与空白对照组比较,脂多糖时间依赖性抑制成肌细胞融合形成肌管,白细胞介素6、肿瘤坏死因子αmRNA表达水平升高,细胞上清液中白细胞介素6水平显著升高;KEGG通路分析支持脂多糖刺激激活核因子κB信号通路。②吲哚丙酸浓度>80μmol/L时抑制C2C12成肌细胞活性;吲哚丙酸和SR9009通过抑制核因子κB信号通路发挥抗炎作用,降低白细胞介素6、肿瘤坏死因子α、Toll样受体4、CD14 mRNA表达水平,p-NF-κB p65/NF-κB p65蛋白表达比值低于脂多糖组。SR9009联合吲哚丙酸显著降低脂多糖诱导的炎症,Toll样受体4、CD14、白细胞介素6和肿瘤坏死因子αmRNA表达水平进一步下调,p-NF-κB p65/NF-κB p65蛋白表达比值显著低于吲哚丙酸+脂多糖组和SR9009+脂多糖组。③Rev-erbα随脂多糖刺激时间依赖性升高;siRNA敲减Rev-erbα效率达58%以上,成功敲减Rev-erbα后添加脂多糖,白细胞介素6和肿瘤坏死因子αmRNA表达较脂多糖组显著上调。④结果说明,Rev-erbα可以作为调节炎症反应的靶点,SR9009靶向激活Rev-erbα联合吲哚丙酸能抑制核因子κB信号通路显著减轻C2C12成肌细胞的炎症反应,联合抗炎效果优于单独干预。

Fabrication and characterization of stir casting AA6061-31%B_4C composite

A sophisticated stir casting route to fabricate large scale AA6061-31%B4C composite was developed. Key process parameters were studied, microstructure and mechanical properties of the composite were investigated. The results indicated that vacuum stirring/casting, B4C/Mg feeding and ingots cooling were essential to the successful fabrication of AA6061-31%B4C composite. Chemical erosion examination verified the designed B4 C content; X-ray fluorescence spectrometer（XFS） showed the chemical composition of Mg and Si in the matrix conformed to industry standards; scanning electronic microscope（SEM） and X-ray diffraction（XRD） revealed that B4 C particles were evenly distributed in the composites with well dispersed Mg2Si precipitates. Tensile testing results showed that the AA6061-31%B4C composite had a tensile strength of 340 MPa, improved by 112.5% compared with AA1100-31%B4C composite, which is attributed to the enhanced strength of the matrix alloy.