In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries fa...In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17 W during charging were designed and simulated in the range of 0-12000 s using COMSOL Multiphysics software. This study efficiently employs the Taguchi optimization technique to develop lithium-ion batteries capable of storing a predetermined average electric power during the charging phase. Therefore, this method enables the battery to achieve complete charging within a specific timeframe tailored to a specificapplication. The implementation of this method can save costs, time, and materials compared with other alternative methods, such as the trial-and-error approach.展开更多
Increasing incidences showed that food allergies have attracted more and more attention from researchers.BALB/c mice were sensitized with wheat gluten combined with aluminum hydroxide adjuvant via intraperitoneal inje...Increasing incidences showed that food allergies have attracted more and more attention from researchers.BALB/c mice were sensitized with wheat gluten combined with aluminum hydroxide adjuvant via intraperitoneal injection,transdermal sensitization,and oral gavage sensitization route.Results showed that all the three sensitization methods could induce allergic symptoms;increase the serum antibody(total immunoglobulin E(IgE),specific IgE,IgG,IgA)and histamine content;promote the secretion of Th2 cytokines(interleukin(IL)-4,IL-5,IL-13)and inflammatory factors(IL-6,IL-17 A,IL-10);and inhibit the production of Th1 cytokines(IFN-γ,IL-2).However,the allergic symptoms of mice sensitized by intraperitoneal injection were the most obvious among the three models.The level of serum antibodies in intraperitoneal injection group was significantly higher than control.Subsequently,16 S rRNA sequencing technology was used to analyze the intestinal flora of mice.The results showed that the abundance of Firmicutes in the wheat protein sensitized group was lower than that in the normal group,while the abundance of Bacteroidetes was higher,and Lactobacillus was the difference marker in normal group.Bacterial species diversity analysis showed that the species richness and diversity of intestinal flora in mice were decreased,the difference between mice induced by intraperitoneal injection and normal control group mice was the most significant.Taken together,these results show that among three sensitization methods used to build a mouse model with aluminum hydroxide as adjuvant,intraperitoneal injection is the comparably best way to build a mouse sensitization mode.展开更多
This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS...This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS have a typical and unusually high activity level,respectively,based on the Afρparameter corrected to phase angle zero at perihelion.The absolute magnitude of comets ATLAS and Palomar in the o-band is 4.71±0.05 and 4.16±0.02 respectively.The cometary activity of comets ATLAS and Palomar probably began at r>13 au before perihelion and will end at r>14 au after perihelion,which means that they could remain active until the second half of 2026.The nucleus of comet ATLAS has a minimum radius of 7.9 km,and the nucleus of comet Palomar could be a little larger.The c-o colors of the comets ATLAS and Palomar are redder and bluer,respectively,at perihelion than the solar twin YBP 1194.These comets showed a bluish trend in the coma color with decreasing heliocentric distance.Comet Palomar probably had two outbursts after its perihelion,each releasing about 10^(8)kg of dust.The slopes of the photometric profile of the comae of these comets were between 1and 1.5,indicating a steady state during the observation campaign.展开更多
文摘In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17 W during charging were designed and simulated in the range of 0-12000 s using COMSOL Multiphysics software. This study efficiently employs the Taguchi optimization technique to develop lithium-ion batteries capable of storing a predetermined average electric power during the charging phase. Therefore, this method enables the battery to achieve complete charging within a specific timeframe tailored to a specificapplication. The implementation of this method can save costs, time, and materials compared with other alternative methods, such as the trial-and-error approach.
基金supported by the National Key Research and Development Program of China(2019YFC1605000)the National Natural Science Foundation(1872904)。
文摘Increasing incidences showed that food allergies have attracted more and more attention from researchers.BALB/c mice were sensitized with wheat gluten combined with aluminum hydroxide adjuvant via intraperitoneal injection,transdermal sensitization,and oral gavage sensitization route.Results showed that all the three sensitization methods could induce allergic symptoms;increase the serum antibody(total immunoglobulin E(IgE),specific IgE,IgG,IgA)and histamine content;promote the secretion of Th2 cytokines(interleukin(IL)-4,IL-5,IL-13)and inflammatory factors(IL-6,IL-17 A,IL-10);and inhibit the production of Th1 cytokines(IFN-γ,IL-2).However,the allergic symptoms of mice sensitized by intraperitoneal injection were the most obvious among the three models.The level of serum antibodies in intraperitoneal injection group was significantly higher than control.Subsequently,16 S rRNA sequencing technology was used to analyze the intestinal flora of mice.The results showed that the abundance of Firmicutes in the wheat protein sensitized group was lower than that in the normal group,while the abundance of Bacteroidetes was higher,and Lactobacillus was the difference marker in normal group.Bacterial species diversity analysis showed that the species richness and diversity of intestinal flora in mice were decreased,the difference between mice induced by intraperitoneal injection and normal control group mice was the most significant.Taken together,these results show that among three sensitization methods used to build a mouse model with aluminum hydroxide as adjuvant,intraperitoneal injection is the comparably best way to build a mouse sensitization mode.
基金The ATLAS project is primarily funded to search for near-earth asteroids through NASA grants NN12AR55G,80NSSC18K0284,and 80NSSC18K1575funded by Kepler/K2 grant J1944/80NSSC19K0112 and HST GO-15889,and STFC grants ST/T000198/1 and ST/S006109/1。
文摘This work analyzes the photometric data of the Oort spike comets C/2019 L3(ATLAS)and C/2019 O3(Palomar)obtained between 2016 and 2023 by the ATLAS network and the Belgian Olmen Observatory.The comets Palomar and ATLAS have a typical and unusually high activity level,respectively,based on the Afρparameter corrected to phase angle zero at perihelion.The absolute magnitude of comets ATLAS and Palomar in the o-band is 4.71±0.05 and 4.16±0.02 respectively.The cometary activity of comets ATLAS and Palomar probably began at r>13 au before perihelion and will end at r>14 au after perihelion,which means that they could remain active until the second half of 2026.The nucleus of comet ATLAS has a minimum radius of 7.9 km,and the nucleus of comet Palomar could be a little larger.The c-o colors of the comets ATLAS and Palomar are redder and bluer,respectively,at perihelion than the solar twin YBP 1194.These comets showed a bluish trend in the coma color with decreasing heliocentric distance.Comet Palomar probably had two outbursts after its perihelion,each releasing about 10^(8)kg of dust.The slopes of the photometric profile of the comae of these comets were between 1and 1.5,indicating a steady state during the observation campaign.
