以C.I.Reactive Red 241、C.I.Disperse Blue 56模拟染料废水为对象,研究了电解法处理该类染料废水的优化条件。考察了起始电压、电解时间、溶液初始p H对处理效果的影响。结果表明,在p H=7,U=14V、I=3.2A、t=30min的条件下,C.I.Reactiv...以C.I.Reactive Red 241、C.I.Disperse Blue 56模拟染料废水为对象,研究了电解法处理该类染料废水的优化条件。考察了起始电压、电解时间、溶液初始p H对处理效果的影响。结果表明,在p H=7,U=14V、I=3.2A、t=30min的条件下,C.I.Reactive Red241模拟染料废水的脱色率可达到86%以上;在p H=7,U=14V、I=3.2A、t=25min的条件下,C.I.Disperse Blue 56模拟染料废水的脱色率可达到79以上%。展开更多
The solubility of C.I. reactive blue 19 in aqueous alkali is poor, so it isn't used to dye cellulosic fiber in cold pad-batch dyeing. In order to improve the solubility of this dyestuff in alkali liquor, the right...The solubility of C.I. reactive blue 19 in aqueous alkali is poor, so it isn't used to dye cellulosic fiber in cold pad-batch dyeing. In order to improve the solubility of this dyestuff in alkali liquor, the right dispersants will be needed. A series of condensates are synthesized by changing the synthesis conditions such as the ratio of naphthalenesulfonic (N) to formaldehyde (F), acidity, and their compositions are confirmed by MS spectrum. It is found that in acidity scope of 20%-24% and the ratio of N to F 1∶0.33, the synthesized condensates can efficiently improve the solubility of C.I. reactive blue 19 in alkali liquor. In addition, the influences of the condensates on the exhaust dyeing and the cold pad-batch dyeing are tested.展开更多
Dyes are common pollutants in textile wastewaters, and the treatment of the wastewater has now attracted much attention due to its wide application and low biodegradability. In this study, Fe^0/C/Clay ceramics, a kind...Dyes are common pollutants in textile wastewaters, and the treatment of the wastewater has now attracted much attention due to its wide application and low biodegradability. In this study, Fe^0/C/Clay ceramics, a kind of novel micro-electrolysis filler, were sintered and employed in a dynamic micro-electrolysis reactor for synthetic Acid Red 73 （AR73） and Reactive Blue 4 （RB4） wastewater treatment. The effects ofinfluent pH, hydraulic retention time （HRT）, and aeration on the decoloration efficiencies of AR73 and RB4 were studied. The optimum conditions for wastewater treatment were： AR73, influent pH of 4, HRT of 2 h and aeration; RB4, influent pH of 5, HRT of 6 h and aeration. Under the optimum conditions, decoloration efficiency of AR73 and RB4 wastewater was 96% and 83%, respectively. Results of UV-vis spectrum scanning demonstrated that the chromophores were broken. Continuous running tests showed that improvement of micro-electrolysis system with Fe^0/C/Clay ceramics for AR73 and RB4 synthetic wastewater treatment could avoid failure of micro-electrolysis reactor, which indicated great potential for the practical application of the ceramics in the field of actual industrial wastewater treatment.展开更多
文摘以C.I.Reactive Red 241、C.I.Disperse Blue 56模拟染料废水为对象,研究了电解法处理该类染料废水的优化条件。考察了起始电压、电解时间、溶液初始p H对处理效果的影响。结果表明,在p H=7,U=14V、I=3.2A、t=30min的条件下,C.I.Reactive Red241模拟染料废水的脱色率可达到86%以上;在p H=7,U=14V、I=3.2A、t=25min的条件下,C.I.Disperse Blue 56模拟染料废水的脱色率可达到79以上%。
文摘The solubility of C.I. reactive blue 19 in aqueous alkali is poor, so it isn't used to dye cellulosic fiber in cold pad-batch dyeing. In order to improve the solubility of this dyestuff in alkali liquor, the right dispersants will be needed. A series of condensates are synthesized by changing the synthesis conditions such as the ratio of naphthalenesulfonic (N) to formaldehyde (F), acidity, and their compositions are confirmed by MS spectrum. It is found that in acidity scope of 20%-24% and the ratio of N to F 1∶0.33, the synthesized condensates can efficiently improve the solubility of C.I. reactive blue 19 in alkali liquor. In addition, the influences of the condensates on the exhaust dyeing and the cold pad-batch dyeing are tested.
文摘Dyes are common pollutants in textile wastewaters, and the treatment of the wastewater has now attracted much attention due to its wide application and low biodegradability. In this study, Fe^0/C/Clay ceramics, a kind of novel micro-electrolysis filler, were sintered and employed in a dynamic micro-electrolysis reactor for synthetic Acid Red 73 （AR73） and Reactive Blue 4 （RB4） wastewater treatment. The effects ofinfluent pH, hydraulic retention time （HRT）, and aeration on the decoloration efficiencies of AR73 and RB4 were studied. The optimum conditions for wastewater treatment were： AR73, influent pH of 4, HRT of 2 h and aeration; RB4, influent pH of 5, HRT of 6 h and aeration. Under the optimum conditions, decoloration efficiency of AR73 and RB4 wastewater was 96% and 83%, respectively. Results of UV-vis spectrum scanning demonstrated that the chromophores were broken. Continuous running tests showed that improvement of micro-electrolysis system with Fe^0/C/Clay ceramics for AR73 and RB4 synthetic wastewater treatment could avoid failure of micro-electrolysis reactor, which indicated great potential for the practical application of the ceramics in the field of actual industrial wastewater treatment.
