The intermittent connection（IC）of the field-bus in networked manufacturing systems is a common but hard troubleshooting network problem,which may result in system level failures or safety issues.However,there is no ...The intermittent connection（IC）of the field-bus in networked manufacturing systems is a common but hard troubleshooting network problem,which may result in system level failures or safety issues.However,there is no online IC location identification method available to detect and locate the position of the problem.To tackle this problem,a novel model based online fault location identification method for localized IC problem is proposed.First,the error event patterns are identified and classified according to different node sources in each error frame.Then generalized zero inflated Poisson process（GZIP）model for each node is established by using time stamped error event sequence.Finally,the location of the IC fault is determined by testing whether the parameters of the fitted stochastic model is statistically significant or not using the confident intervals of the estimated parameters.To illustrate the proposed method,case studies are conducted on a 3-node controller area network（CAN）test-bed,in which IC induced faults are imposed on a network drop cable using computer controlled on-off switches.The experimental results show the parameters of the GZIP model for the problematic node are statistically significant（larger than 0）,and the patterns of the confident intervals of the estimated parameters are directly linked to the problematic node,which agrees with the experimental setup.The proposed online IC location identification method can successfully identify the location of the drop cable on which IC faults occurs on the CAN network.展开更多
An autonomous vehicle operates in a dynamically changing environment,where multiple sensors must work in a cooperative mode. In these scenarios reliability of the communication protocol carries a lot of importance in ...An autonomous vehicle operates in a dynamically changing environment,where multiple sensors must work in a cooperative mode. In these scenarios reliability of the communication protocol carries a lot of importance in real time data transfer. In this paper, CAN communication is used to demonstrate sensor integration using a LIDAR and a camera. Also demonstrated is a novel method for object detection, obstacle avoidance and navigation of an autonomous RC vehicle.展开更多
This paper reviews the research work done on the Reliability Analysis of Controller Area Network (CAN) based systems. During the last couple of decades, real-time researchers have extended schedulability analysis to a...This paper reviews the research work done on the Reliability Analysis of Controller Area Network (CAN) based systems. During the last couple of decades, real-time researchers have extended schedulability analysis to a mature technique which for nontrivial systems can be used to determine whether a set of tasks executing on a single CPU or in a distributed system will meet their deadlines or not [1-3]. The main focus of the real-time research community is on hard real-time systems, and the essence of analyzing such systems is to investigate if deadlines are met in a worst case scenario. Whether this worst case actually will occur during execution, or if it is likely to occur, is not normally considered. Reliability modeling, on the other hand, involves study of fault models, characterization of distribution functions of faults and development of methods and tools for composing these distributions and models in estimating an overall reliability figure for the system [4]. This paper presents the research work done on reliability analysis developed with a focus on Controller-Area-Network-based automotive systems.展开更多
针对采用控制器局域网络(CAN:Controller Area Network)总线的自动操舵系统和采用串口通讯的航海导航设备之间通讯的不匹配问题,设计了一种基于Cortex-M3嵌入式平台的通信转换模块,实现了串口与CAN总线数据的双向转换功能。同时对传统CA...针对采用控制器局域网络(CAN:Controller Area Network)总线的自动操舵系统和采用串口通讯的航海导航设备之间通讯的不匹配问题,设计了一种基于Cortex-M3嵌入式平台的通信转换模块,实现了串口与CAN总线数据的双向转换功能。同时对传统CAN收发器CTM1050存在的信号稳定性不足、波特率精准度低等问题,提出并实现了一种硬件电路的替代方案,提高了数据通讯的时效性和稳定性。基于CAN2.0B扩展帧,设计了自动操舵系统内部CAN总线协议。该协议可根据报文信息优先级分配标识帧,保证了总线数据的有序传输。实验结果表明,该通讯模块功能使用正常且通讯效果良好,具有一定通用性,可在多种需要转换的设备系统上推广使用。展开更多
现场总线控制系统作为新一代控制系统在电力系统尤其是在配电网自动化和变电站自动化中得到了广泛的应用。文中介绍了现场总线中一种很有影响的控制局域网络(Control Area Network, CAN)总线技术,同时介绍了嵌入式计算机的工业标准PC/10...现场总线控制系统作为新一代控制系统在电力系统尤其是在配电网自动化和变电站自动化中得到了广泛的应用。文中介绍了现场总线中一种很有影响的控制局域网络(Control Area Network, CAN)总线技术,同时介绍了嵌入式计算机的工业标准PC/104总线,设计出可用于变电站监控的基于CAN总线的嵌入式控制系统,并已在动态模拟实验室中投入运行,取得了满意效果。展开更多
基金Supported by National Natural Science Foundation of China(Grant No51005205)Science Fund for Creative Research Groups of Nationa Natural Science Foundation of China(Grant No.51221004)+1 种基金Nationa Basic Research Program of China(973 Program,Grant No.2013CB035405)Open Foundation of State Key Laboratory of Automotive Safety and Energy,Tsinghua University,China(Grant No.KF13011)
文摘The intermittent connection（IC）of the field-bus in networked manufacturing systems is a common but hard troubleshooting network problem,which may result in system level failures or safety issues.However,there is no online IC location identification method available to detect and locate the position of the problem.To tackle this problem,a novel model based online fault location identification method for localized IC problem is proposed.First,the error event patterns are identified and classified according to different node sources in each error frame.Then generalized zero inflated Poisson process（GZIP）model for each node is established by using time stamped error event sequence.Finally,the location of the IC fault is determined by testing whether the parameters of the fitted stochastic model is statistically significant or not using the confident intervals of the estimated parameters.To illustrate the proposed method,case studies are conducted on a 3-node controller area network（CAN）test-bed,in which IC induced faults are imposed on a network drop cable using computer controlled on-off switches.The experimental results show the parameters of the GZIP model for the problematic node are statistically significant（larger than 0）,and the patterns of the confident intervals of the estimated parameters are directly linked to the problematic node,which agrees with the experimental setup.The proposed online IC location identification method can successfully identify the location of the drop cable on which IC faults occurs on the CAN network.
文摘An autonomous vehicle operates in a dynamically changing environment,where multiple sensors must work in a cooperative mode. In these scenarios reliability of the communication protocol carries a lot of importance in real time data transfer. In this paper, CAN communication is used to demonstrate sensor integration using a LIDAR and a camera. Also demonstrated is a novel method for object detection, obstacle avoidance and navigation of an autonomous RC vehicle.
文摘This paper reviews the research work done on the Reliability Analysis of Controller Area Network (CAN) based systems. During the last couple of decades, real-time researchers have extended schedulability analysis to a mature technique which for nontrivial systems can be used to determine whether a set of tasks executing on a single CPU or in a distributed system will meet their deadlines or not [1-3]. The main focus of the real-time research community is on hard real-time systems, and the essence of analyzing such systems is to investigate if deadlines are met in a worst case scenario. Whether this worst case actually will occur during execution, or if it is likely to occur, is not normally considered. Reliability modeling, on the other hand, involves study of fault models, characterization of distribution functions of faults and development of methods and tools for composing these distributions and models in estimating an overall reliability figure for the system [4]. This paper presents the research work done on reliability analysis developed with a focus on Controller-Area-Network-based automotive systems.
文摘针对采用控制器局域网络(CAN:Controller Area Network)总线的自动操舵系统和采用串口通讯的航海导航设备之间通讯的不匹配问题,设计了一种基于Cortex-M3嵌入式平台的通信转换模块,实现了串口与CAN总线数据的双向转换功能。同时对传统CAN收发器CTM1050存在的信号稳定性不足、波特率精准度低等问题,提出并实现了一种硬件电路的替代方案,提高了数据通讯的时效性和稳定性。基于CAN2.0B扩展帧,设计了自动操舵系统内部CAN总线协议。该协议可根据报文信息优先级分配标识帧,保证了总线数据的有序传输。实验结果表明,该通讯模块功能使用正常且通讯效果良好,具有一定通用性,可在多种需要转换的设备系统上推广使用。
文摘现场总线控制系统作为新一代控制系统在电力系统尤其是在配电网自动化和变电站自动化中得到了广泛的应用。文中介绍了现场总线中一种很有影响的控制局域网络(Control Area Network, CAN)总线技术,同时介绍了嵌入式计算机的工业标准PC/104总线,设计出可用于变电站监控的基于CAN总线的嵌入式控制系统,并已在动态模拟实验室中投入运行,取得了满意效果。
