Development of Strip Casting Technology in Rare Earth Permanent Magnet Alloys and Hydrogen Storage Alloys in China

The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.

Influence of Casting Technique on the Mechanical Properties of Bimetal Composites

According to the characteristic of two liquid and bimetal composite interface,the influence of the casting techniques on the interface microstructure,wear and comprehensive properties were researched by using scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDAX).The results show that the casting technique has an effect on the surface quality and the stress state of the composites,but also has great effect on the interface microstructure,morphology and constitute phase.In this paper,a special casting technology was used to prepare the bimetal composites.No two-metal mixture layer was observed at the interface.On the contrary,a metallurgy interface was found,which provides high working security.A product rate of 95% was achieved by this special casting process.The service life is 50% higher than that of the commercial products.

Microstructure of Ni /WC Surface Composite Layer on Gray Iron Substrate

The surface infiltrated composite （Ni/WC） layers on gray iron substrate were fabricated through a vacuum infiltration casting technique （VICT） using Ni-based composite powder with different WC particles content as raw materials.The microstructures of surface infiltrated composite layer,the interface structures between surface composite layer and the substrate,the changes of macro-hardness with the increasing of WC content and the micro-hardness distribution are investigated.The infiltrated composite layer includes a surface composite layer and a transition layer,and the thickness of the transition layer decreases with the increasing content of WC.The thickness of transition layer with 20%WC content in the surface infiltrated composite layer was 170 μm which was the thickest for all transition layers with different WC content.The surface composite layer was mainly composed of WC,W2C,FeB and NiB,along with Ni-Cr-Fe,Ni （Cr） solid solution,Ni （Si） solid solution and Ni （Fe） solid solution.The transition layer was composed of Ni （Cr） solid solution,Ni （Fe） solid solution,Ni （Si） solid solution,Fe （Ni） solid solution and eutectic.The surface macro-hardness and micro-hardness of the infiltrated layer had been evaluated.The macro-hardness of the surface composite layer decreases with the WC content increasing,and the average macro-hardness is HRC60.The distribution of micro-hardness presents gradient change.The average micro-hardness of the infiltrated layer is about HV1000.