In this work, a kind of new vitrified bond based on Li2O-Al2O3-SiO2 glass ceramics was used to bond the diamond grains, which is made into grinding wheel and the cylindrical grinding process of polycrystalline diamond...In this work, a kind of new vitrified bond based on Li2O-Al2O3-SiO2 glass ceramics was used to bond the diamond grains, which is made into grinding wheel and the cylindrical grinding process of polycrystalline diamond compacts （PDCs） by using the new vitrified bond diamond grinding wheel was discussed. Several factors which influence the properties of grinding wheel such as amount of vitrified bond and the kinds and amount of stuff in grinding wheel were also investigated. It was found that the new vitrified bond can firmly combine diamond grains, when there are only diamonds and vitrified bond in the structure of grinding wheel, the longevity of the grinding wheel is about 2.5-3 times as that of resin bond grinding wheel for processing PDCs. The grinding size precision of PDCs can be improved from 4-0.03 mm to 4-0.01 mm because of larger Young＇s modulus of vitrified bond than resin bond. The grinding time of a PDC product can be 1.75-2.0 min from 3.25-3.5 min, so this kind of grinding wheel can save much time for processing PDCs. Also, there is hardly noise when using this new vitrified bond diamond grinding wheel to process PDCs. The amount of vitrified bond in grinding wheel influences the longevity of grinding wheel. When the size of diamond grains is 90-107 μm, the optimal amount of vitrified bond in grinding wheel is 21% （wt pct）. When the amount of vitrified bond exceeds 21%, there are many pores in grinding block, which will decrease the longevity of grinding wheel. The existence of addition stuff such as Al2O3 or SiC can reduce the longevity of grinding wheel.展开更多
CBN (Cubic Boron Nitride) is a highly efficient abrasive and has unique properties (highhardness, high thermal stability and high chemical inertia). As early as 1969 CBN Wheels had al-ready been made and showed excell...CBN (Cubic Boron Nitride) is a highly efficient abrasive and has unique properties (highhardness, high thermal stability and high chemical inertia). As early as 1969 CBN Wheels had al-ready been made and showed excellent performance for grainding high speed steels and othermaterials hard to be ground. So far, however, CBN Wheels are still not popularly utilized in theindustry, the writer considers the main reason being the inadequate study for practical applica-tions and especially the suitable dressing technique. The dressing of resinoid CBN Wheels discussed in the paper, is different from that ofconventional ones. It has to be divided into two operations, truing and sharpening, each of whichhas its specific and independent functions. A simple dressing method with a lot of informationsuitable for production is studied; finally, the grain height protruding from the bond is taken asan index for evaluating the dressing results, and the effect of grain height on the grinding per-formance is discussed. By selecting proper conditions according to the workpiece requirements, abetter technical and economical benifit can be obtained.展开更多
文摘In this work, a kind of new vitrified bond based on Li2O-Al2O3-SiO2 glass ceramics was used to bond the diamond grains, which is made into grinding wheel and the cylindrical grinding process of polycrystalline diamond compacts （PDCs） by using the new vitrified bond diamond grinding wheel was discussed. Several factors which influence the properties of grinding wheel such as amount of vitrified bond and the kinds and amount of stuff in grinding wheel were also investigated. It was found that the new vitrified bond can firmly combine diamond grains, when there are only diamonds and vitrified bond in the structure of grinding wheel, the longevity of the grinding wheel is about 2.5-3 times as that of resin bond grinding wheel for processing PDCs. The grinding size precision of PDCs can be improved from 4-0.03 mm to 4-0.01 mm because of larger Young＇s modulus of vitrified bond than resin bond. The grinding time of a PDC product can be 1.75-2.0 min from 3.25-3.5 min, so this kind of grinding wheel can save much time for processing PDCs. Also, there is hardly noise when using this new vitrified bond diamond grinding wheel to process PDCs. The amount of vitrified bond in grinding wheel influences the longevity of grinding wheel. When the size of diamond grains is 90-107 μm, the optimal amount of vitrified bond in grinding wheel is 21% （wt pct）. When the amount of vitrified bond exceeds 21%, there are many pores in grinding block, which will decrease the longevity of grinding wheel. The existence of addition stuff such as Al2O3 or SiC can reduce the longevity of grinding wheel.
文摘CBN (Cubic Boron Nitride) is a highly efficient abrasive and has unique properties (highhardness, high thermal stability and high chemical inertia). As early as 1969 CBN Wheels had al-ready been made and showed excellent performance for grainding high speed steels and othermaterials hard to be ground. So far, however, CBN Wheels are still not popularly utilized in theindustry, the writer considers the main reason being the inadequate study for practical applica-tions and especially the suitable dressing technique. The dressing of resinoid CBN Wheels discussed in the paper, is different from that ofconventional ones. It has to be divided into two operations, truing and sharpening, each of whichhas its specific and independent functions. A simple dressing method with a lot of informationsuitable for production is studied; finally, the grain height protruding from the bond is taken asan index for evaluating the dressing results, and the effect of grain height on the grinding per-formance is discussed. By selecting proper conditions according to the workpiece requirements, abetter technical and economical benifit can be obtained.
