The Agricultural Science and Technology Experiment and Demonstration Park,as a unique tourist scenic spot,is a new model for the development of low-carbon leisure agriculture.In this paper,with Xinglong Tropical Botan...The Agricultural Science and Technology Experiment and Demonstration Park,as a unique tourist scenic spot,is a new model for the development of low-carbon leisure agriculture.In this paper,with Xinglong Tropical Botanical Park as a study case,the practice of developing a model of low-carbon agricultural science and technology tourism in the park is explored.Main measures for developing low-carbon leisure agriculture in Agricultural Science and Technology Experiment and Demonstration Park are summarized,including development of low carbon attractors,construction of low carbon facilities,strengthening low-carbon management,building low-carbon environment and so on,according to analysis on the models for development of low-carbon agricultural science tourism in this park.展开更多
Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations int...Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations into shock waves driven by a two-step radiation pulse in polystyrene（CH） capsule targets are experimentally conducted at the Shen Guang Ⅱ laser facility. Differing from the traditional shock-timing implementation in which one shock wave could catch up with another one in solid CH, in this experiment, the second shock front in a rarefaction CH layer is observed through velocity interferometry. This second shock could also be made to converge with rarefaction waves within only a few micrometers of the CH capsule by designing the two-shock coalescence time. A shock-timing diagnostic technique to tune the multi-shock convergence in the CH capsule can thereby be achieved.The experimental results in the CH layer are quasi-quantitatively interpreted using streamlines simulated with the Multi-1 D program. The experimental results are expected to offer important information for target structure and laser pulse design, both of which are important for realizing inertial confinement fusion.展开更多
Repositories for deep geological disposal of radioactive waste rely on multi-barrier systems to isolate waste from the biosphere.A multi-barrier system typically comprises the natural geological barrier provided by th...Repositories for deep geological disposal of radioactive waste rely on multi-barrier systems to isolate waste from the biosphere.A multi-barrier system typically comprises the natural geological barrier provided by the repository host rock e in our case the Opalinus Clay e and an engineered barrier system(EBS).The Swiss repository concept for spent fuel and vitrified high-level waste(HLW)consists of waste canisters,which are emplaced horizontally in the middle of an emplacement gallery and are separated from the gallery wall by granular backfill material(GBM).We describe here a selection of five in-situ experiments where characteristic hydro-mechanical(HM)and thermo-hydro-mechanical(THM)processes have been observed.The first example is a coupled HM and mine-by test where the evolution of the excavation damaged zone(EDZ)was monitored around a gallery in the Opalinus Clay(ED-B experiment).Measurements of pore-water pressures and convergences due to stress redistribution during excavation highlighted the HM behaviour.The same measurements were subsequently carried out in a heater test(HE-D)where we were able to characterise the Opalinus Clay in terms of its THM behaviour.These yielded detailed data to better understand the THM behaviours of the granular backfill and the natural host rock.For a presentation of the Swiss concept for HLW storage,we designed three demonstration experiments that were subsequently implemented in the Mont Terri rock laboratory:(1)the engineered barrier(EB)experiment,(2)the in-situ heater test on key-THM processes and parameters(HE-E)experiment,and(3)the full-scale emplacement(FE)experiment.The first demonstration experiment has been dismantled,but the last two ones are on-going.展开更多
Background The fluorosis derived from coal burning is a very serious problem in China. By using fluorine-fixing technology during coal burning we are able to reduce the release of fluorides in coal at the source in or...Background The fluorosis derived from coal burning is a very serious problem in China. By using fluorine-fixing technology during coal burning we are able to reduce the release of fluorides in coal at the source in order to reduce pollution to the surrounding environment by coal burning pollutants as well as decrease the intake and accumulating amounts of fluorine in the human body. The aim of this study was to conduct a pilot experiment on calcium-based fluorine-fixing material efficiency during coal burning to demonstrate and promote the technology based on laboratory research. Methods A proper amount of calcium-based fluorine sorbent was added into high-fluorine coal to form briquettes so that the fluorine in high-fluorine coal can be fixed in coal slag and its release into atmosphere reduced. We determined figures on various components in briquettes and fluorine in coal slag as well as the concentrations of indoor air pollutants, including fluoride, sulfur dioxide and respirable particulate matter （RPM）, and evaluated the fluorine-fixing efficiency of calcium-based fluorine sorbents and the levels of indoor air pollutants. Results Pilot experiments on fluorine-fixing efficiency during coal burning as well as its demonstration and promotion were carried out separately in Guiding and Longli Counties of Guizhou Province, two areas with coal burning fluorosis problems. If the calcium-based fluorine sorbent mixed coal was made into honeycomb briquettes the average fluorine-fixing ratio in the pilot experiment was 71.8%. If the burning calcium-based fluorine-fixing bitumite was made into a coalball, the average of fluorine-fixing ratio was 77.3%. The concentration of fluoride, sulfur dioxide and PM10 of indoor air were decreased significantly. There was a 10% increase in the cost of briquettes due to the addition of calcium-based fluorine sorbent. Conclusions The preparation process of calcium-based fluorine-fixing briquette is simple yet highly flammable and it is applicable to regions with abundant bitumite coal. As a small scale application, villagers may make fluorine-fixing coalballs or briquettes by themselves, achieving the optimum fluorine-fixing efficiency and reducing indoor air pollutants providing environmental and social benefits.展开更多
基金Supported by Special Project for Spark Industrial Zone of Hainan Province(HNXH201104)
文摘The Agricultural Science and Technology Experiment and Demonstration Park,as a unique tourist scenic spot,is a new model for the development of low-carbon leisure agriculture.In this paper,with Xinglong Tropical Botanical Park as a study case,the practice of developing a model of low-carbon agricultural science and technology tourism in the park is explored.Main measures for developing low-carbon leisure agriculture in Agricultural Science and Technology Experiment and Demonstration Park are summarized,including development of low carbon attractors,construction of low carbon facilities,strengthening low-carbon management,building low-carbon environment and so on,according to analysis on the models for development of low-carbon agricultural science tourism in this park.
基金Supported by the Science and Technology on Plasma Physics Laboratory under Grant No 9140C6801021001
文摘Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations into shock waves driven by a two-step radiation pulse in polystyrene（CH） capsule targets are experimentally conducted at the Shen Guang Ⅱ laser facility. Differing from the traditional shock-timing implementation in which one shock wave could catch up with another one in solid CH, in this experiment, the second shock front in a rarefaction CH layer is observed through velocity interferometry. This second shock could also be made to converge with rarefaction waves within only a few micrometers of the CH capsule by designing the two-shock coalescence time. A shock-timing diagnostic technique to tune the multi-shock convergence in the CH capsule can thereby be achieved.The experimental results in the CH layer are quasi-quantitatively interpreted using streamlines simulated with the Multi-1 D program. The experimental results are expected to offer important information for target structure and laser pulse design, both of which are important for realizing inertial confinement fusion.
文摘Repositories for deep geological disposal of radioactive waste rely on multi-barrier systems to isolate waste from the biosphere.A multi-barrier system typically comprises the natural geological barrier provided by the repository host rock e in our case the Opalinus Clay e and an engineered barrier system(EBS).The Swiss repository concept for spent fuel and vitrified high-level waste(HLW)consists of waste canisters,which are emplaced horizontally in the middle of an emplacement gallery and are separated from the gallery wall by granular backfill material(GBM).We describe here a selection of five in-situ experiments where characteristic hydro-mechanical(HM)and thermo-hydro-mechanical(THM)processes have been observed.The first example is a coupled HM and mine-by test where the evolution of the excavation damaged zone(EDZ)was monitored around a gallery in the Opalinus Clay(ED-B experiment).Measurements of pore-water pressures and convergences due to stress redistribution during excavation highlighted the HM behaviour.The same measurements were subsequently carried out in a heater test(HE-D)where we were able to characterise the Opalinus Clay in terms of its THM behaviour.These yielded detailed data to better understand the THM behaviours of the granular backfill and the natural host rock.For a presentation of the Swiss concept for HLW storage,we designed three demonstration experiments that were subsequently implemented in the Mont Terri rock laboratory:(1)the engineered barrier(EB)experiment,(2)the in-situ heater test on key-THM processes and parameters(HE-E)experiment,and(3)the full-scale emplacement(FE)experiment.The first demonstration experiment has been dismantled,but the last two ones are on-going.
文摘Background The fluorosis derived from coal burning is a very serious problem in China. By using fluorine-fixing technology during coal burning we are able to reduce the release of fluorides in coal at the source in order to reduce pollution to the surrounding environment by coal burning pollutants as well as decrease the intake and accumulating amounts of fluorine in the human body. The aim of this study was to conduct a pilot experiment on calcium-based fluorine-fixing material efficiency during coal burning to demonstrate and promote the technology based on laboratory research. Methods A proper amount of calcium-based fluorine sorbent was added into high-fluorine coal to form briquettes so that the fluorine in high-fluorine coal can be fixed in coal slag and its release into atmosphere reduced. We determined figures on various components in briquettes and fluorine in coal slag as well as the concentrations of indoor air pollutants, including fluoride, sulfur dioxide and respirable particulate matter （RPM）, and evaluated the fluorine-fixing efficiency of calcium-based fluorine sorbents and the levels of indoor air pollutants. Results Pilot experiments on fluorine-fixing efficiency during coal burning as well as its demonstration and promotion were carried out separately in Guiding and Longli Counties of Guizhou Province, two areas with coal burning fluorosis problems. If the calcium-based fluorine sorbent mixed coal was made into honeycomb briquettes the average fluorine-fixing ratio in the pilot experiment was 71.8%. If the burning calcium-based fluorine-fixing bitumite was made into a coalball, the average of fluorine-fixing ratio was 77.3%. The concentration of fluoride, sulfur dioxide and PM10 of indoor air were decreased significantly. There was a 10% increase in the cost of briquettes due to the addition of calcium-based fluorine sorbent. Conclusions The preparation process of calcium-based fluorine-fixing briquette is simple yet highly flammable and it is applicable to regions with abundant bitumite coal. As a small scale application, villagers may make fluorine-fixing coalballs or briquettes by themselves, achieving the optimum fluorine-fixing efficiency and reducing indoor air pollutants providing environmental and social benefits.
