ANALYSIS AND MEASUREMENT FOR THE DYNAMIC ERRORS OF COORDINATE MEASURING MACHINES

The analysis and calculating method of dynamic errors of CMMs during probing are discussed.To relate the dynamic displacement errors with the dynamic rotational errors a method for obtaining the displacement errors at the probing position from dynamic rotational errors is presented.It is pointed out that the finite element method might be used for modeling dynamic errors.However,dynamic errors are difficult to be modeled so a combined practical and theoretical approach is needed.In addition,the dynamic errors are measured with inductive position sensors.

Error separation in CMM coordinate metrology

Form error measurement is a critical exercise in providing measures for the quality control in the precision manufacturing industry.Coordinate measuring machine （CMM） is one of the automated systems used in the accurate and precise dimensional measurements and geometrical form.This paper aims to study the effect of dynamic original unforeseeable errors at different undulations per revolution （UPR） of standard artifact measurement using selected two types of CMM touchtriggering stylus.Stylus-type and stylus-speed parameters were adopted and utilized throughout the course of experiment.The results are analyzed using fast Fourier transformation to obtain foreseeable geometrical errors due to CMM machine structure and stylus scanning speeds.The results of experiment successfully indicate that the number of UPR plays an important role in determining the CMM accuracy level of the roundness measurement result.Some specific error equations for stylus system and machine structure responses have been postulated and analysed to empirically predict the accuracy of PRISMOBridge-CMM-type at National Institute for Standards （NIS） in egypt.

Multi-Aspect Value of Measuring Systems and Methods Based on the Results of Roundness Measurements

The increase of quality consciousness brings about the growth of significance of metrological systems. Besides the significance, the level of automatization, flexibility, accuracy, et al. have advanced. The modern measuring systems are constructed so that nearly all necessary dimensional characteristics can be measured with them. However, conventional measuring systems are provided for particular mode measurements. This research paper presents and compares several conventional and modem measuring systems and methods. The measured value is roundness, one of the basic shapes of cross section in mechanical engineering. This paper arises in search of answers for the question whether conventional measuring techniques and equipments are made redundant because of the modern ones. In what segments and in which criterion are modem methods preferable？

CAD Model-Based Intelligent Inspection Planning for Coordinate Measuring Machines

As the market competition among enterprises grows intensively and the demand for high quality products increases rapidly, product quality inspection and control has become one of the most important issues of manufacturing, and improving the efficiency and accuracy of inspection is also one of problems which enterprises must solve. It is particularly important to establish rational inspection planning for parts before inspecting product quality correctly. The traditional inspection methods have been difficult to satisfy the requirements on the speed and accuracy of modern manufacturing, so CAD-based computer-aided inspection planning （CAIP） system with the coordinate measuring machines （CMM） came into being. In this paper, an algorithm for adaptive sampling and collision-free inspection path generation is proposed, aiming at the CAD model-based inspection planning for coordinate measuring machines （CMM）. Firstly, using the method of step adaptive subdivision and iteration , the sampling points for the specified number with even distribution will be generated automatically. Then, it generates the initial path by planning the inspection sequence of measurement points according to the values of each point＇s weight sum of parameters, and detects collision by constructing section lines between the probe swept-volume surfaces and the part surfaces, with axis-aligned bounding box （AABB） filtering to improve the detection efficiency. For collided path segments, it implements collision avoidance firstly aiming at the possible outer-circle features, and then at other collisions, for which the obstacle-avoiding movements are planned with the heuristic rules, and combined with a designed expanded AABB to set the obstacle-avoiding points. The computer experimental results show that the presented algorithm can plan sampling points＇ locations with strong adaptability for different complexity of general surfaces, and generate efficient optimum path in a short time and avoid collision effectively.

ERROR COMPENSATION OF COORDINATE MEASURING MACHINES WITH LOW STIFFNESS

A technique for compensating the errors of coordinate measuring machines (CMMs) with low stiffness is proposed. Some additional items related with the force deformation are introduced to the error compensation aquations. The research was carried on a moving colunm horizontal arm CMM. Experimental results show that both the effects of systematic components of error motions and force deformations are greatly reduced, which shows the effectiveness of proposed technique.

COORDINATE MEASURING MACHINE PROBING ACCESSIBILITY

The accessibility of coordinate measuring machines (CMMs) in dimensional inspection is studied. The problem of computing the global accessibility cone is solved using a method of angle representation. Otherwise, the length and volume of probe are considered sufficiently so that all the feasible probe orientations could be determined for the inspection of a workpiece when a touch trigger probe is used and the shortcoming of abstracting a probe as an infinite half line could be overcome completely. In the end, an example is given to explain the method.

Integrated Product and Process Design Using a Reverse Engineering System

Computer-integrated manufacturing (CIM) and revers e engineering (RE) have changed drastically the concept of product re-design, pla nning and manufacture of components. However, the main problems currently facing the developers of reverse engineering system, is the time consuming digitis ation of 3D data and the conversion of large amounts of data into a concise and manageable format and linking it to a CAD/CAM system. Automated 3-D profile gen eration, measurements and inspection of manufactured component represents one of the important functions in reverse engineering and in the improvements in produ ct quality in rapid product developments. The paper presents a novel methodology for the development of a reverse enginee ring technique for use in the rapid product development in a CIM environment . The system developed provides integration, data capture and manipulation, dat a transfer between a CAD, CAM, Computer-aided inspection (CAI) and a 3-D profi le scanning system. An efficient scanning strategy has been developed for scann ing and surfaces data acquisition. The products were scanned using a laser scann ing system with a dedicated scan control card and the associated software packag es. A versatile rig was developed for the ease of data gathering of the profile scanning process. The surface data collected was then used to build a mathematic al surface model, which was then used to develop a virtual 3-D model of the pro duct. The resulting surface model provides the geometrical input to the subseque nt machining operation using either a CNC system or other manufacturing operatio n e.g. dies casting/mould casting etc. The prototypes developed were inspected u sing a state-of-the art CNC-CMM that was integrated to the CAD/CAM system. Si nce the scanning/digitised data captured by laser scanning probes requires no ma nual editing, significant time saving over most non-contact probe systems was a chieved. Since the creation of an accurate CAD model of a redesigned component o r a prototype constitute a major element of the total turnaround time; maximum r eturn can be achieved by increasing the efficiency of the redesigning process. T he paper also outlines with a case study the application of the developed system . The system developed offers the flexibility of using the concept of reverse en gineering of a variety of components with the complimentary facility of integrat ion between CAD/CAM Computer-aided Inspection (CAI) systems and a scanning syst em. The developed reverse engineering application in an integrated manufacturing system can increase the consistency, improve cost-efficiency, reduce produ ct turn around and skill levels required to redesign, reengineer and prototyping components and products.