A Reliability Allocation Method of CNC Lathes Based on Copula Failure Correlation Model

The current research of reliability allocation of CNC lathes always treat CNC lathes as independent series systems. However, CNC lathes are complex systems in the actual situation. Failure correlation is rarely considered when reliabil?ity allocation is conducted. In this paper, drawbacks of reliability model based on failure independence assumption are illustrated, after which, reliability model of CNC lathes considering failure correlation of subsystems is established based on Copula theory, which is an improvement of traditional reliability model of series systems. As the failure time of CNC lathes often obeys Weibull or exponential distribution, Gumbel Copula is selected to build correlation model. After that, a reliability allocation method considering failure correlation is analyzed based on the model established before. Reliability goal is set first and then failure rates are allocated to subsystems according to the allocation vector through solving the correlation model. Reliability allocation is conducted for t = 1. A real case of a CNC lathe and a numerical case are presented together to illustrate the advantages of the reliability model established consider?ing failure correlation and the corresponding allocation method. It shows that the model accords to facts and real working condition more, and failure rates allocated to all the subsystems are increased to some extent. This research proposes a reliability allocation method which takes failure correlation among subsystems of CNC lathes into consid?eration, and costs for design and manufacture could be decreased.

Applied research on reliable increase measures of CNC lathes

According to the reliable data of sixteen CNC lathes, each reliable index of the serial CNC lathes is evaluated before tackling and after tackling. According to the failure analysis, reliable improvement measures of the serial CNC lathes are put forward.

Comprehensive Reliability Allocation Method for CNC Lathes Based on Cubic Transformed Functions of Failure Mode and Effects Analysis

Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

Reliability evaluation on CNC lathes based on the modified L-M method

Equivalent ways commonly used in engineering works are not effective to estimate the reliability of tandem system based on L-M method. One modified L-M method is an important means to estimate the reliability of CNC lathes. A method of using two named confidence limits for the estimation is put forward. Fitting resuits of the sub-systems of CNC machine tools are estimated. And the scattered level of confidence limits facing the reliability matrix of sub-systems can be clearly seen.

Importance Analysis on Subsystem of CNC Lathe Based on TOPSIS

An importance analysis model for computer numerical control（CNC）lathe subsystems was proposed.The model was based on technique for order preference by similarity to an ideal solution（TOPSIS）and considered the structure correlation between subsystems and the complete machine,the fault correlation of each subsystem and so on.The model can obtain a comprehensive sequencing of subsystems based on their importance to the complete machine.It lays a theoretical foundation for reliability allocation.

Design of High Precision CNC Vertical Lathe Turning Tool Holder

A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established,and the optimal damping ratio,optimal frequency ratio,and maximum relative amplitude were derived.Modal analysis of the passive damping vibrationreduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.