Optimization Method for Electrical Water Heaters Considering Shifting Potentials of Electricity Consumption and Water-use Activities

Electrical water heaters(EWHs)are important can-didates to provide demand-response services.The traditional op-timization method for EWHs focuses on the optimization of the electricity consumption,without considering the shifting poten-tial of the water-use activities.This paper proposes an optimiza-tion method for EWHs considering the shifting potentials of both the electricity consumption and water-use activities.Con-sidering that the water-use activities could be monolithically shifted,the shifting model of the water-use activities was devel-oped.In addition to the thermodynamic model of the EWH,the optimal scheduling model of the EWH was developed and solved using mixed-integer linear programming.Case studies were performed on a single EWH and aggregate EWHs,demon-strating that the proposed method can shift the water-use activi-ties and therefore increase the load-shifting potential of the EWHs.

Development and Experimental Study of Air Source Heat Pump Water Heater

The principle and development prospect of air source heat pump water heat were introduced,as well as the designation of condenser (storage water tank),experimental study on installations was also carried out.The results showed that air source heat pump water heater was superior to conventional system.Under the operation of cooling and heating,heat pump comprehensive utilization equipment could improve heating performance,reduce energy consumption,and recycle condensing heat to provide hot water.

Experimental study on characteristics of transcritical heat pump water heater using refrigerant HFC125

To evaluate the performance of heat pumps using refrigerant HFC125,an experimental rig of a DC-inverter heat pump water heater is designed and set up,and the research on the transcritical heat pump water heater is carried out experimentally.It is found that there is a top value of the coefficient of performance（COP）when the system runs at 95 Hz of frequency.The relationships between the COP and compressor frequency,condensation pressure,evaporation pressure,condensation water temperature rise,and discharge temperature are discussed and analyzed at 95 Hz.And the COP of the HFC125 transcritical cycle is also compared with that of a R410 subcritical heat pump under the same conditions.The results indicate that there exists an optimum frequency for a better COP,and the system COP shows an increasing tendency with the decrease in condensation pressure and compressor ratio while the evaporation pressure remains invariant,and the COP decreases rapidly when cooling water temperature rises over 47.5 ℃.Compared with the R410A sub-critical cycle,the COP of HFC125 transcritical cycle significantly increases by 12% on average.

Simulation study on combustion system of tankless gas water heater

This paper simulates the combustion system of a regular tankless gas water heater under different static pressure conditions.The simulation results are in accordance with the test results.It proves that the used physical and mathematical models are reasonable.The results show that the flame height and the excess air ratios depend on the system pressure drop but not on the absolute pressure at the combustion chamber.The pressure drop and the amount of combustion air have an inverse relationship with CO generation,and they also impact on the temperature and velocity fields.To reduce CO emission,a stronger fan is needed to provide extra pressure head to ensure that enough combustion air is introduced into the system.This study provides a useful research tool to develop products through computational fluid dynamic analysis and laboratory testing.

Research on Strategies of Solar Water Heater Inclustry＇s Development in China at Present Stage

大力发展太阳能热水器产业，是我国推广可再生能源、实现传统能源替代的重要战略选择。通过对我国太阳能热水器产业发展现状、自身存在问题以及外部环境挑战的分析，提出了现阶段促进该产业发展的相关策略。

Experimental Study of Thermoelectric Heat Pump Water Heater with Exhaust Heat Recovery from Kitchens

A new kind of thermoelectric heat pump water heater for kitchens exhaust heat recovery was presented,and its performances were investigated under different operating voltages.The experiment results show that the coefficient of performance decreases and the temperature difference between the hot and cold sides becomes larger with the increase of the operating voltage,but the heating time becomes short.The higher the temperature of water,the greater the temperature difference between the hot and cold sides,leading to a smaller coefficient of performance.Under an exhaust temperature of 36 ℃,the coefficient of performance decreases from 1.66 to 1.22 when the temperature of water increases from 28 ℃ to 46 ℃ with operating voltage 16 V.Performance tests illustrate that,compared with the conventional electrical water heaters,the new kind of thermoelectric heat pump water heater is more coefficient.

Effect of obstruction on thermal performance of solar water heaters

Solar water heaters(SWH) are widely used in urban areas because of their advantages in reducing energy consumption and mitigating greenhouse gas emissions. However, the performance of SWH subjected to obstructions is unclear yet. In this study, we present a numerical evaluation on thermal performance of fa?ade-installed SWH under three typical obstructed scenarios, based on various levels of sunshine duration. This study is carried out for four locations with various latitudes across China. Thermal performance is measured by solar fraction for annual and monthly evaluation. The results show that the obstruction can seriously degrade annual solar fraction of SWH, even in the 4-hour sunshine duration scenario, for all the studied locations. Interestingly, only lengthening sunshine duration in the standard day(e.g., from 2 h to 4 h) may not result in increasing annual solar fraction markedly. In terms of the monthly performance, solar fraction in January and December decreases significantly, while from May to August it just declines slightly, except for Guangzhou having a swift reduction. This study can provide insights into the behavior and promote the appropriate application of SWH in urban areas.

On the Thermo Economical Optimization of Feed Water Heaters in Thermal Power Plants

A thermoeconomic optimization analysis is presented yielding simple algebraic formulae for estimating the optimum number of feed water heater and optimal area distribution among the feed water heaters for thermal power plants. The P1-P2 method is used in the present study, together with the thermoeconomic analyses of feed water heaters.

Performance enhancement of water bath heater at natural gas city gate station using twisted tubes

Natural gas is transported from producing regions to consumption regions by using transmission pipelines at high pressures. At consumption regions, the pressure of natural gas is reduced in city gate stations(CGSs). Before the pressure reduction process, the temperature of natural gas is increased usually by using a water bath heater,which burns natural gas as fuel, to protect against freezing of natural gas. These types of heat exchangers have a low efficiency and consume a lot of fuel to generate the required heat. In the current study, the twisted configuration of the heating coil is proposed and investigated to enhance the heat transfer through a water bath heater with a nominal capacity of 1000 m^3·h^-1. Firstly, the implementation procedure is validated with data collected from the CGS of Qaleh-Jiq(located in Golestan province of Iran). A very good agreement is achieved between the obtained results and the real data. Then, three different twist ratios are considered to examine the twisting effects. The proposed technique is evaluated in the terms of velocity, temperature, and pressure variations, and the results are compared with the conventional case, i.e. straight configuration. It is found that both the heat transfer rate and the pressure drop augment as the twist ratio is raised. Finally, it is concluded that the twisted tubes can reduce the length of the gas coil by about 12.5% for the model with low twist ratio, 18.75% for the model with medium twist ratio, and 25% for the model with high twist ratio as compared to the straight configuration.

Low molybdenum ultra-pure ferritic stainless steel for solar water heaters

In order to meet the demands of service life and the synthetical performance/price ratio of stainless steel in the solar water heater industry, the low molybdenum ultra-pure ferritic stainless steel （FSS） B445J1M was developed at Baosteel. In this study, comparative studies were carried out on the mechanical properties, the formability and the corrosion resistance of B445J1M ,304 and 444 ,and the advantages and application fields of B445J1M were summarized.

Situation of China's solar water heater industry,related national standards,testing and the Golden Sun certification program

China is the largest solar water heater producer and market in the world.Despite the fast growth and an installed capacity that accounts for the majority of the global gross,China's per capita solar hot water capacity is still very low,implying a huge margin of market potential;and the recognition of the industry in the global market is handicapped by the scattered scale of production and inconsistent product quality.To ensure continued growth of China's solar water heating(SWH) industry,Chinese Government has established a series of national SWH standards,three national testing centers,and a certification program to lay the foundation for the development of the Golden Sun product labeling system.China General Certification Center(CGC) developed the Golden Sun product certification and labeling system on a pass/fail basis evaluating with established criteria.The system was designed to help manufacturers acclimate to explicit consistent requirements and to identify and fix the deficiencies in the design and execution of the program itself.Timely revision and integration of the national standards are recommended to accommodate the test procedures and requirements to new technologies and the evolving SWH market.Strict implementation of the Golden Sun certification and labeling system are suggested to avail improving the quality control and forging internationally reputable brands of Chinese solar water heating products.

An Integrated Collector Storage Solar Water Heater and Study of its Temperature Stratification

In this paper we describe an integrated collector storage solar water heater for the North Western region of India for use as domestic water heater during the winter season and present the experimental results of temperature stratification. The system consists of a steel water storage tank with azimuthal orientation such that its walls face south east, south west, north east and North West directions. The sunlit walls (south east and south west) and the top cover surface of the storage tank are covered with transparent insulation material (TIM) and the off-sunlit sides with opaque insulation. Experimental results show that the top layer is at the highest temperature. The top layer is drained using a new design of the outlet. The system can be used in rural areas or as a pre heater in more affluent households. The system can return the cost of conversion of the storage tank into a Solar Water Heater in one winter season by saving the cost of electrical energy required for heating water during winter months.

Performance Analysis of Solar Water Heater

Two solar water heaters of 100 liter and 200 liter were installed on the roof-top of electronics laboratory at Old Academic Building (OAB) of Electrical and Electronics Engineering Department of BUET. The data of 12 months have been collected and analyzed in this paper. It is found that the incoming hot tap water is about 30℃ higher than the room temperature during day time during winter months. This is about 25℃ in afternoon hours.

Performance of Water in Glass Evacuated Tube Solar Water Heater under Kenya Climatic Condition

Solar water heaters which provide a cost-effective and environmental friendly approach to hot water generation are in widespread application. Evacuated tube solar water heaters perform better than flat plate solar water heaters as a result of their greater surface area exposed for sunlight absorption. Water-in-glass evacuated tube solar water heaters are widely used as compared to heat-pipe solar water heaters due to their short payback periods. In this study, the performance of water-in-glass evacuated tube solar water heater is investigated through experiments under the climatic conditions in Kenya. The results revealed a daily efficiency range of 0.58 - 0.65 and a daily final outlet temperature greater than 55°C given an initial temperature of 25°C.

Full-Scale Measurement and Numerical Analysis of Liquefied Petroleum Gas Water Heaters with Ventilation Factors in Balcony

This study carried out full-scale gas water heater combustion experiments and adopted FDS （fire dynamics simulator） to simulate three scenarios--different balcony environments when using water heater, such as airtight balcony, indoor door with openings and force ventilation to compare with full-scale combustion experiments. According to FDS simulation results, 02, CO and CO2 simulation concentration value correspond with full-scale experimental results. When the indoor O2 concentration was lower than 15%, which causes incomplete combustion, the CO concentration would rise rapidly and even reached above 1,500 ppm, causing death in short time. In addition, when the force ventilation model supplied the water heater with enough air to bum, the indoor CO concentration will keep low and harmless to humans. The study also adopted diverse variables, such as the opening area of window, outdoor wind speed and water heater types, to analyze deeply user＇s safety regarding gas water heater. In a result, while balcony area is larger than 14 mE, the volume of water heater is below 16 L （33.1 kW）, and the indoor window, connecting balcony with room, is closed, if the opening on the outdoor window of the balcony is larger than 0.2 mE, this can ensure the personal security of the indoor space.

Design of Scenery Complementary Solar Water Heater Based cm Eddy Current Method

This paper uses scenery complementary heating method to discuss a new type of scenery complementary water heater design. This product can be divided into two parts. The first part is the eddy current method wind power heating part, which is driven by wind power and vertical axis wind turbines and the design of magnet array rotor disc rotation, namely, magnetic field rotating, induced eddy current in the stator, so as to generate heat. The second part is the solar heating part. This works has broad market prospect, which provides a new idea for large-scaled heating method.

he Design of Efficient Heat Transfer Based on Flat Plate Solar Water Heater

This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputtering technology AL-N/AL. this design conduct heat through aluminum material which can reduce the cost meanwhile conduct heat effectively. To ensure the quality of the water at the same time improve the utilization rate of solar energy, this design use phase change for second heat exchange. Take Shanghai for example, where this design and heat transfer model are applied, the average efficiency of water heaters can achieve 68%, which has proven the feasibility of the design. In a word, this design can achieve the goal of energy conservation and emissions reduction and has broad market prospects.

Numerical and Experimental Study on Dynamic Performance of Heat Pump Water Heater with Electronic Expansion Valve

A series of experiments on the dynamic performance of the HPWH （heat pump water heater） unit with EXV （electronic expansion valve） under different environmental conditions were conducted. The dynamic heating capacity and COP （coefficient of performance） of the HPWH unit under different EXV openings were measured. The effects of the EXV opening on the performance of the HPWH unit were analyzed. Meanwhile, the dynamic performance of the HPWH with EXV was simulated and the results were compared with the experimental one. The experimental results indicate that during heating process, the COP increases firstly and then decreases for a fixed EXV opening, which is in good agreement with the numerical result. For different EXV openings, the COP and heating capacity of the system using larger EXV opening are superior to those using the smaller one in the initial heating stage. While in the late stage, the performance of system using smaller EXV opening is better. It is found that the system performance is improved significantly by changing the EXV opening in the different heating period and the average COP of the HPWH system is increased by 7.6%.

Performance of U-tube Solar Water Heaters Facing Different Directions

System performance of solar water heaters depends upon collector and storage tank designs, solar radiation intensity and ambient temperature, amongst others. Evacuated glass tube collectors with U-tubes inside are less prone to leakages than the all-glass or the heat pipe types. U-tube solar water heaters suspended on walls and balconies could help overcome present day roof space restriction and increasing apartment-style housing. As such, their performance would depend upon its orientation when mounted in a vertical position. This paper reports the results of outdoor tests conducted on natural convection U-tube solar water heaters oriented towards different directions. Long and short term test procedures were employed to allow us to compare their performances as if they were tested simultaneously side-by-side.