Controllable synthesis of CuAlO_(2) via solid-phase method and its catalytic performance for methanol steam reforming to hydrogen

This study explores the controllable synthesis of CuAlO_(2) using copper hydroxide and pseudo-boehmite powders as raw materials via a simple solid-phase ball milling method,along with its catalytic performance investigation in methanol steam reforming(MSR).Various catalysts were prepared under different conditions,such as calcination temperature,calcination atmosphere,and heating rate.Characterization techniques including BET,XRD,XPS,SEM and H2-TPR were employed to analyze the samples.The results revealed significant effects of calcination temperature on the phase compositions,specific surface area,reduction performance,and surface properties of the CA-T catalysts.Based on the findings,a synthesis route of CuAlO_(2) via the solid-phase method was proposed,highlighting the importance of high calcination temperature,nitrogen atmosphere,and low heating rate for CuAlO_(2) formation.Catalytic evaluation data demonstrated that CuAlO_(2) could catalyze MSR without pre-reduction,with the catalytic performance of CA-T catalysts being notably influenced by calcination temperature.Among the prepared catalysts,the CA-1100 catalyst exhibited the highest catalytic activity and stability.The findings of this study might be useful for the further study of the catalytic material for sustained release catalysis,including the synthesis of catalytic materials and the regulation of sustained release catalytic performance.

Regulating crystal phase of TiO_(2) to enhance catalytic activity of Ni/TiO_(2) for solar-driven dry reforming of methane

Ni/TiO_(2) catalyst is widely employed for photo-driven DRM reaction while the influence of crystal structure of TiO_(2) remains unclear.In this work,the rutile/anatase ratio in supports was successfully controlled by varying the calcination temperature of anatase-TiO_(2).Structural characterizations revealed that a distinct TiO_(x) coating on the Ni nanoparticles(NPs)was evident for Ni/TiO_(2)-700 catalyst due to strong metal-support interaction.It is observed that the TiOx overlayer gradually disappeared as the ratio of rutile/anatase increased,thereby enhancing the exposure of Ni active sites.The exposed Ni sites enhanced visible light absorption and boosted the dissociation capability of CH4,which led to the much elevated catalytic activity for Ni/TiO_(2)-950 in which rutile dominated.Therefore,the catalytic activity of solar-driven DRM reaction was significantly influenced by the rutile/anatase ratio.Ni/TiO_(2)-950,characterized by a predominant rutile phase,exhibited the highest DRM reactivity,with remarkable H_(2) and CO production rates reaching as high as 87.4 and 220.2 mmol/(g·h),respectively.These rates were approximately 257 and 130 times higher,respectively,compared to those obtained on Ni/TiO_(2)-700 with anatase.This study suggests that the optimization of crystal structure of TiO_(2) support can effectively enhance the performance of photothermal DRM reaction.

Tar formation characteristic of integrated process of coal pyrolysis with dry reforming of low carbon alkane over Ni/La_(2)O_(3)-ZrO_(2)

Coal pyrolysis integrated with dry reforming of low-carbon alkane(CP-DRA)is an effective way to improve tar yield.Ni/La_(2)O_(3)-ZrO_(2) with a La/Zr ratio of 4 was a good catalyst for DRA to inhibit carbon deposition and obtain high tar yield in CP-DRA.In this study,the fraction distribution and component of tars from CP-DRA and coal pyrolysis in N_(2) atmosphere(CP-N_(2))were characterized by using several methods to understand the effect of DRA on coal pyrolysis.The isotope trace method was also used to discuss the role of low-carbon alkane in CP-DRA.The results showed that the tar from CP-N_(2)is mainly composed of aliphatic compounds with more C_(al),H_(al) and CH+CH_(2),and the tar from CP-DRA contains more Car,Har,and CH_(3),and has lower weight-average molecular weight and more light tar content than CP-N_(2).A small amount of C_(2)H_(6) addition in CP-DRA will raise the ratio of H_(β) and CH+CH_(2).Electron paramagnetic resonance(EPR)analysis shows that the tar from CP-DRA has a higher radical concentration while the corresponding char has a lower radical concentration.The isotope trace experiment showed that alkanes provide·H,·CH_(3),etc.to stabilize the radicals from coal pyrolysis and result in more alkyl aromatic compounds during CP-DRA.

Engineering oxygen vacancies on Tb-doped ceria supported Pt catalyst for hydrogen production through steam reforming of long-chain hydrocarbon fuels

Steam reforming of long-chain hydrocarbon fuels for hydrogen production has received great attention for thermal management of the hypersonic vehicle and fuel-cell application.In this work,Pt catalysts supported on CeO_(2)and Tb-doped CeO_(2)were prepared by a precipitation method.The physical structure and chemical properties of the as-prepared catalysts were characterized by powder X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Raman spectroscopy,H_(2)temperature programmed reduction,and X-ray photoelectron spectroscopy.The results show that Tb-doped CeO_(2)supported Pt possesses abundant surface oxygen vacancies,good inhibition of ceria sintering,and strong metal-support interaction compared with CeO_(2)supported Pt.The catalytic performance of hydrogen production via steam reforming of long-chain hydrocarbon fuels(n-dodecane)was tested.Compared with 2Pt/CeO_(2),2Pt/Ce_(0.9)Tb_(0.1)O_(2),and 2Pt/Ce_(0.5)Tb_(0.5)O_(2),the 2Pt/Ce_(0.7)Tb_(0.3)O_(2)has higher activity and stability for hydrogen production,on which the conversion of n-dodecane was maintained at about 53.2%after 600 min reaction under 700℃at liquid space velocity of 9 ml·g^(-1)·h^(-1).2Pt/CeO_(2)rapidly deactivated,the conversion of n-dodecane was reduced to only 41.6%after 600 min.

Revealing the Promoting Eff ect of CeO_(2)on the Cu/ZnO Catalyst for Methanol Steam Reforming

Cu-based catalysts have been extensively used in methanol steam reforming(MSR)reactions because of their low cost and high effi ciency.ZnO is often used in commercial Cu-based catalysts as both a structural and an electronic promoter to stabilize metal Cu nanoparticles and modify metal–support interfaces.Still,the further addition of chemical promoters is essential to further enhance the MSR reaction performance of the Cu/ZnO catalyst.In this work,CeO_(2)-doped Cu/ZnO catalysts were prepared using the coprecipitation method,and the eff ects of CeO_(2)on Cu-based catalysts were systematically investigated.Doping with appropriate CeO_(2)amounts could stabilize small Cu nanoparticles through a strong interaction between CeO_(2)and Cu,leading to the formation of more Cu+–ZnO x interfacial sites.However,higher CeO_(2)contents resulted in the formation of larger Cu nanoparticles and an excess of Cu+–CeO x interfacial sites.Consequently,the Cu/5CeO_(2)/ZnO catalyst with maximal Cu–ZnO interfaces exhibited the highest H 2 production rate of 94.6 mmolH2/(gcat·h),which was 1.5 and 10.2 times higher than those of Cu/ZnO and Cu/CeO_(2),respectively.

Kinetics of methanol steam reforming over COPZr-2 catalyst

The COPZr-2 catalyst, which was prepared in our prophase research, showed good catalytic performance in methanol steam reforming reaction. In this article, the best one was chosen as an example to study the reaction kinetics of methanol steam reforming over this type of catalyst. First, the effects of methanol conversion to outlet CO2 and methanol conversion to outlet CO on methanol pseudo contact time W/FMeOH were investigated. Then by applying the reaction route that methanol direct reforming （DR） and methanol decomposition （DE） were carried out in parallel, the reaction kinetic model with power function type was established. And the parameters for the model were estimated using a non-linear regression program which computed weighted least squares of the defined objects function. Finally, the kinetic model passed the correlation test and the F-test.

Coke-Resistant Ni-based Catayst for Partial Oxidation and CO_2-Reforming of Methane to Syngas

Ｃｏｋｅ┐ＲｅｓｉｓｔａｎｔＮｉ┐ｂａｓｅｄＣａｔａｙｓｔｆｏｒＰａｒｔｉａｌＯｘｉｄａｔｉｏｎａｎｄＣＯ２┐ＲｅｆｏｒｍｉｎｇｏｆＭｅｔｈａｎｅｔｏＳｙｎｇａｓ＊ＣＨＥＮＰｉｎｇ，ＺＨＡＮＧＨｏｎｇ－ｂｉｎ＊＊，ＬＩＮＧｕｏ－ｄｏｎｇ，ＧＵＯＺｈｏ...

Autothermal reforming of methane over Ni catalysts supported over ZrO2-CeO2-Al2O3

Ni catalysts supported on Al2O3, ZrO2-Al2O3, CeO2-Al2O3 and ZrO2-CeO2-Al2O3 were prepared by coprecipitation method, and their catalytic performances for autothermal reforming of methane to hydrogen were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. The relationship between the structures and catalytic activities of the catalysts was discussed. The results showed that the catalytic activity and stability of the Ni/ZrO2-CeO2-Al2O3 catalyst was better than those of other catalysts with the highest CH4 conversion, H2/CO and H2/COx ratio at 750 ℃. The catalyst showed a little deactivation along the reaction time during its 72 h on stream with the mean deactivation rate of 0.08%/h. The catalytic performance of the Ni/ZrO2-CeO2-Al2O3 catalyst was also affected by reaction temperature, no2 ： nCH4 molar ratio and nH2O ： nCH4 molar ratio. TPR, XRD and XPS measurements indicated that the formation of ZrO2-CeO2 solid solution could improve the dispersion of NiO, and inhibit the formation of NiAl2O3, and thus significantly promoted the catalytic activity of the Ni/ZrO2-CeO2-Al2O3 catalyst.

Effect of calcination temperature on structure and performance of Ni/TiO_2-SiO_2 catalyst for CO_2 reforming of methane

The influence of calcination temperature on the structure and catalytic behavior of Ni/TiO2-SiO2 catalyst, for CO2 reforming of methane to synthesis gas under atmospheric pressure, was investigated. The results showed that the Ni/TiO2-SiO2 catalyst calcined at 700 ℃ had high and stable activity while the catalysts calcined at 550 and 850 ℃ had low and unstable activity. Depending on the calcination temperature, one, two, or three of the following Ni-containing species, NiO, Ni2.44Ti0.72Si0.07O4, and NiTiO3 were identified by combining the temperature programmed reduction （TPR） and X-ray diffraction （XRD） results. Their reducibility decreased in the sequence： NiO〉Ni2.44Ti0.72Si0.07O4〉NiTiO3. It suggests that high and stable activities observed over the Ni/TiO2-SiO2 catalyst calcined at 700 ~C were induced by the formation of Ni2.44Ti0.72Si0.07O4 and smaller NiO species crystallite size.

NiO-Ce_(0.5)Zr_(0.5)O_2 catalysts prepared by citric acid method for steam reforming of ethanol

NiO-Ce0.5Zr0.5O2 catalysts were prepared by citrate method and used for hydrogen production from steam reforming of ethanol （SRE）. The effect of nickel content and space velocity on the catalytic performance was investigated. The prepared catalysts were characterized with XRD and thermal analysis techniques. 20%NiO-Ce0.5Zr0.5O2catalyst was very active and selective for hydrogen production via SRE, in which ethanol conversion of 100% could be obtained with feed component of 20% （H2O＋EtOH） and 80% N2, water/ethanol of 3/1 in molar ratio at 350 ℃. Also, the catalyst showed good stability for anti-sintering and carbon-resistance. The XRD illuminated that both NiO and Ce0.5Zr0.5O2 crystal sizes were very small in NiO-Ce0.5Zr0.5O2 catalyst, and Ce0.5Zr0.5O2 solid solution was formed.

Hydrogen and syngas production from two-step steam reforming of methane using CeO_2 as oxygen carrier

CeO2 oxygen carrier was prepared by precipitation method and tested by two-step steam reforming of methane （SRM）. Two-step SRM for hydrogen and syngas generation is investigated in a fixed-bed reactor. Methane is directly converted to syngas at a H2/CO ratio close to 2 ： 1 at a high temperature （above 750 °C） by the lattice oxygen of CeO2; methane cracking is found when the reduction degree of CeO2 was above 5.0% at 850 °C in methane isothermal reaction. CeO2？δ obtained from methane isothermal reaction can split water to generate CO-free hydrogen and renew its lattice oxygen at 700 °C; simultaneously, deposited carbon is selectively oxidized to CO2 by steam following the reaction （C＋2H2O→CO2＋2H2）. Slight deactivation in terms of amounts of desired products （syngas and hydrogen） is observed in ten repetitive two-step SRM process due to the carbon deposition on CeO2 surface as well as sintering of CeO2.

Effects of Ce/Zr ratio on the structure and performances of Co-Ce_(1-x)Zr_xO_2 catalysts for carbon dioxide reforming of methane

The Co-incorporated Ce1-xZrxO2 catalysts were prepared by co-precipitation for carbon dioxide reforming of methane.The ratio of Ce to Zr was varied to optimize the performances of co-precipitated Co-Ce-Zr-Ox catalysts.The prepared catalysts were characterized by various physico-chemical characterization techniques including TPR,X-ray diffraction,N2 adsorption at low temperature,XPS and CO2-TPSR.The co-precipitated Co-Ce0.8Zr0.2O2 sample containing 16% CoO exhibited a higher catalytic activity among the five catalysts,and the activity was maintained without significant loss during the reaction for 60 h.Under the conditions of 750 ℃,0.1 MPa,36000 ml/（h gcat）,and CO2/CH4 molar ratio of 1：1,the CO2 conversion over this catalyst was 75% while the CH4 conversion was 67%.The cubic Ce0.8Zr0.2O2 facilitated a higher dispersion and a higher reducibility of the cobalt component,and the apparent activation energy for Co-Ce0.8Zr0.2O2 sample was 49.1 kJ/mol in the CO2/CH4 reforming reaction.As a result,the Co-Ce0.8Zr0.2O2 sample exhibited a higher activity and stability for the reforming of CH4 with CO2.

Ethanol steam reforming over Ni-Cu/Al_2O_3-M_yO_z (M = Si, La, Mg,and Zn) catalysts

Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction. The effects of Cu content, support species involving Al2O3-SIO2, Al2O3-MgO, Al2O3-ZnO, and Al2O3-La2O3, on the catalytic performance were studied. Characterizations by TPR, XRD, NH3-TPD, XPS, and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30Ni5Cu/Al2O3-ZnO have much higher H2 selectivity than 30Ni5Cu/Al2O3-SiO2, as well as good coke resistance. H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450 ℃ and increased to 94.0% at 600℃, whereas for 30Ni5Cu/Al2O3-ZnO catalyst, the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600℃. TheseAl2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions.

Low-temperature dry reforming of methane tuned by chemical speciations of active sites on the SiO_(2) and γ-Al_(2)O_(3) supported Ni and Ni-Ce catalysts

The cognition of active sites in the Ni-based catalysts plays a vital role and remains a huge challenge in improving catalytic performance of low temperature CO_(2) dry reforming of methane(LTDRM).In this work,typical catalysts of SiO_(2) and γ-Al_(2)O_(3) supported Ni and Ni-Ce were designed and prepared.Importantly,the difference in the chemical speciations of active sites on the Ni-based catalysts is revealed by advanced characterizations and further estimates respective catalytic performance for LTDRM.Results show that larger[Ni0-]particles mixed with[Ni-O-Sin])species on the Ni/SiO_(2)(R)make CH_(4) excessive decomposition,leading to poor activity and stability.Once the Ce species is doped,however,superior activity(59.0%CH_(4) and 59.8%CO_(2) conversions),stability and high H_(2)/CO ratio(0.96)at 600℃ can be achieved on the Ni-Ce/SiO_(2)(R),in comparison with other catalysts and even reported studies.The improved performance can be ascribed to the formation of integral([Ni0_(n))]-[CeⅢ-□-CeⅢ])species on the Ni-Ce/SiO_(2)(R)catalyst,containing highly dispersed[Ni]particles and rich oxygen vacancies,which can synergistically establish a new stable balance between gasification of carbon species and CO_(2) dissocia-tion.With respect to Ni-Ce/γ-Al_(2)O_(3)(R),the Ni and Ce precursors are easily captured by extra-framework Al_(n)-OH groups and further form stable isolated([Ni0_(n))]-[Ni-O-Al_(n)])and[CeⅢ-O-Al_(n)]species.In such a case,both of them preferentially accelerate CO_(2) adsorption and dissociation,causing more car-bon deposition due to the disproportionation of superfuous CO product.This deep distinguishment of chemical speciations of active sites can guide us to further develop new efficient Ni-based catalysts for LTDRM in the future.

Methane reforming with CO_2 to syngas over CeO_2-promoted Ni/Al_2O_3-ZrO_2 catalysts prepared via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 （Ni/Al2O3-ZrO2-CeO2） catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy （IR）, thermal gravimetric analysis （TGA）, microscopic analysis, X-ray diffraction （XRD） and temperature-programmed reduction （TPR）. The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.

High H_(2) selective performance of Ni-Fe-Ca/H-Al catalysts for steam reforming of biomass and plastic

The development of a selective catalyst for the conversion of biomass and plastics into H2by steam reforming can combat the energy crisis and global warming.In this work,support Ni-Fe-Ca/H-Al bifunctional catalysts were prepared by loading Ni and Fe into pretreatment CaO/Al_(2)O_(3)(Ca/H-Al)carriers and showed high catalytic activity for the steam reforming of biomass and plastic.Moreover,the idea of bidirectional degradation was exploited to strengthen the pyrolysis of plastic with a high H/C and biomass with a high O/C.Interestingly,the products presented high H2selective(1302.10 m L/g)and low CO_(2)yield(120.23 m L/g)in 7Ni-5Fe-Ca/H-Al(2:4)catalyst compared with current reports.Here,the abundant oxygen vacancies(Ov)in the H-Al carrier exhibited an electron-deficient nature,providing active sites for anchoring Ni O.Meanwhile,Ni O interacted with Ca_(2)Fe_(2)O_(5)to produce more defective Ovsites,which stabilized the NiO particles in the 7Ni-5Fe-Ca/H-Al(2:4)catalyst,and the interaction between the catalyst and the carrier was enhanced,leading to the reduction of weakly basic sites,this property promoted the strong adsorption of CO_(2)and H2O by the catalyst,contributing to the enhancement of efficient steam conversion and the promotion of conversion of by-products to H2.Notably,7Ni-5Fe-Ca/H-Al(2:4)catalysts maintained structural integrity after regeneration and exhibited excellent regenerability in H2selection and CO_(2)adsorption.The work provides a new idea for the study of efficient H2production from steam reforming of biomass and plastics.

Insight into MgO promoter with low concentration for the carbon-deposition resistance of Ni-based catalysts in the CO_2 reforming of CH_4

The CO2reforming of CH4is studied over MgO‐promoted Ni catalysts,which were supported on alumina prepared from hydrotalcite.This presents an improved stability compared with non‐promoted catalysts.The introduction of the MgO promoter was achieved through the‘‘memory effect’’of the Ni‐Al hydrotalcite structure,and ICP‐MS confirmed that only0.42wt.%of Mg2+ions were added into the Ni‐Mg/Al catalyst.Although no differences in the Ni particle size and basicity strength were observed,the Ni‐Mg/Al catalyst showed a higher catalytic stability than the Ni/Al catalyst.A series of surface reaction experiments were used and showed that the addition of a MgO promoter with low concentration can promote CO2dissociation to form active surface oxygen arising from the formation of the Ni‐MgO interface sites.Therefore,the carbon‐resistance promotion by nature was suggested to contribute to an oxidative environment around Ni particles,which would increase the conversion of carbon residues from CH4cracking to yield CO on the Ni metal surface.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.

Comparison of dry reforming of methane in low temperature hybrid plasma-catalytic corona with thermal catalytic reactor over Ni/γ-Al_2O_3

In the current study, the hybrid effect of a corona discharge and γ-alumina supported Ni catalysts in CO2 reforming of methane is investigated. The study includes both purely catalytic operation in the temperature range of 923-1023 K, and hybrid catalytic-plasma operation of DC corona discharge reactor at room temperature and ambient pressure. The effect of feed flow rate, discharge power and Ni/γ-Al2O3 catalysts are studied. When CH4/CO2 ratio in the feed is 1/2, the syngas of low Ha/CO ratio at about 0.56 is obtained, which is a potential feedstock for synthesis of liquid hydrocarbons. Although Ni catalyst is only active above 573 K, presence of Ni catalysts in the cold corona plasma reactor （T≤523 K） shows promising increase in the conversions of methane and carbon dioxide. When Ni catalysts are used in the plasma reaction, H2/CO ratios in the products are slightly modified, selectivity to CO increases whereas fewer by-products such as hydrocarbons and oxygenates are formed.

Role of La_2_O3 as Promoter and Support in Ni/γ-Al_2O_3 Catalysts for Dry Reforming of Methane

The nature of support and type of active metal affect catalytic performance. In this work, the effect of using La203 as promoter and support for Ni/γ-A1203 catalysts in dry reforming of methane was investigated. The reforming reactions were carried out at atmosphenc pressure in the temperature range of 500-2700℃. The activity and stability of the catalyst, carbon formation, and syngas （H2/CO） ratio were determined. Various techniques were applied for characterization of both fresh and used catalysts. Addition of La2O3 to the catalyst matrix improved the dispersion of Ni and adsorption of CO2, thus its activity and stability enhanced.

Hydrogen production from steam reforming of ethanol over Ni/MgO-CeO_2 catalyst at low temperature

MgO,CeO2 and MgO-CeO2 with different mole ratio of Mg:Ce were prepared by solid-phase burning method.Catalysts Ni/MgO,Ni/CeO2 and Ni/MgO-CeO2 were prepared by impregnation method.The catalytic properties were evaluated in ethanol steam reforming(ESR) reaction.Specific surface areas of the supports were measured by nitrogen adsorption-desorption at 77 K,and the catalysts were characterized with X-ray diffraction(XRD),temperature programmed reduction(TPR) and thermogravimetric(TG).The results showed that well...