Cr^(Ⅵ) adsorption on four typical soil colloids: equilibrium and kinetics

It is observed that the adsorption of chromium are greater on kaolinite minerals, red soil (R) and laterite (L) colloids than that on montmorillonite, indicotic black (IB) and yellow brown (YB) soil colloids. The adsorption process of Cr Ⅵ on these media can be further described by Langmuir or Freundlich equation quite well. The adsorption reaction of Cr Ⅵ is fast, and the adsorption equilibrium can be reached within the first two hours in moderate temperature. The adsorption quantity of Cr Ⅵ to kaolinite mineral increased with the increasing pH in the range of 2.0 to 7.0, then decreased at higher pH. But it showed some consistence among the four soil colloids. The lower the pH, the stronger the adsorption. The possible mechanisms are further discussed here. Meanwhile the influence of temperature on Cr Ⅵ adsorption on different soil colloid and clay minerals are also investigated.

Adsorption of Cadmium by Soil Colloids and Minerals in Presence of Rhizobia

Experiments were conducted to study the adsorption of Cd on two soil colloids (red soil and yellow- brown soil) and three variable-charge minerals (goethite, noncrystalline Fe oxide and kaolin) in the absence and presence of rhizobia. The tested strain Rhizobium fredii C6, tolerant to 0.8 mmol L-1 Cd, was selected from 30 rhizobial strains. Results showed that the isotherms for the adsorption of Cd by examined soil colloids and minerals in the presence of rhizobia could be described by Langmuir equation. Within the range of the numbers of rhizobial cells studied, the amount of Cd adsorbed by each system increased with increasing rhizobial cells. Greater increases for the adsorption of Cd were found in red soil and kaolin systems. Rhizobia influence on the adsorption of Cd by examined soil colloids and minerals was different from that on the adsorption of Cu. The presence of rhizobia increased the adsorption sanity of soil colloids and minerals for Cd, particularly for the goethite and kaolin systems. The discrepancies in the influence of rhizobia on the adsorbability and affinity of selected soil colloids and minerals for Cd suggested the different interactions of rhizobia with various soil components. It is assumed that bacterial biomass plays an important role in controlling the mobility and bioavailability of Cd in soils with kaolinite and goethite as the major colloidal components, such as in variable-charge soil.

Effect of Cr(Ⅵ) and p-Chloroaniline Interaction on Their Reaction Behaviors on Soil Colloids

Adsorption of Cr(Ⅵ) and p-chloroaniline on three typical soil colloids and pH influence were studied using batch equilibrium method. Both of Cr(Ⅵ) and p-chloroaniline adsorption on the colloids could be well described by general adsorption simulation equations. The adsorption processes changed with media pH. When Cr(Ⅵ) and p-chloroaniline coexisted on soil colloids, their interactions could be observed in a certain pH range to be accompanied with Cr(Ⅵ) reduction, which clearly suggested that a surface catalytic reaction occurred in this system. Soil colloid acted as an efficient catalyst for the interaction of Cr(Ⅵ) and p-chloroaniline. The pH values at which no interaction was observed were 4.0, 4.5 and 5.0 for the colloids of indigotic black soil, yellow-brown soil and latosol, respectively. Capillary electrophoresis used to analyze p-chloroaniline provided a high separation efficiency and short separation time, and needed no more extensive pretreatment of samples.

DEPLETION POTENTIAL OF COLLOIDS: A DIRECT SIMULATION STUDY

The depletion interaction between a big sphere and a hard wall and between two big hard spheres in a hard sphere colloidal sytem was studied by the Monte Carlo method. Direct simulation of free energy difference was performed by means of the Acceptance Ratio Method (ARM).

Adsorption of Acid Phosphatase on Minerals and Soil Colloids in Presence of Citrate and Phosphate

The aim of this work was to study the influence of phosphate and citrate, which are common inorganic and organic anions in soils, on the adsorption of acid phosphatase by kaolin, goethite and the colloids separated from yellow-brown soil (YBS) and latosol (LS) in central-south China. The YBS colloid has the major clay mineral composition of 1.4 nm mineral, illite and kaolinite while the LS colloid mainly contains kaolinite and oxides. The adsorption isotherm of acid phosphatase on the examined soil colloids and minerals fitted to the Langmuir model. The amount of enzyme adsorbed in the absence of ligands was in the order of YBS colloid > LS colloid > kaolin ≈ goethite. In the presence of phosphate or citrate, the amounts of the enzyme adsorbed followed the sequence YBS colloid > kaolin > LS colloid > goethite. The presence of ligands also decreased the binding energy between the enzyme and soil colloids or minerals. With the increase of ligand concentration from 10 mmol L-1 to 400 m mol L-1, different behaviors for the adsorption of enzyme were found in the colloid and mineral systems studied. A sharp decrease in enzyme adsorption was observed on goethite while gradual decreases of enzyme adsorption were recorded in the two soil colloid systems. However, no any decrease was found for the amount of enzyme adsorbed on kaolin at higher ligand concentrations. When phosphate or citrate was introduced to the system before the addition of enzyme, the ligands usually enhanced the adsorption of enzyme. The results obtained in this study suggested the important role of kaolinite mineral in the adsorption of enzyme molecules in acidic soils in the presence of various ligands.

SYNTHESIS OF POLYMER-STABILIZED RUTHENIUM COLLOIDS BY LOW BOILING POINT ALCOHOL REDUCTION

Stable and well-dispersed poly(N-vinyl-2-pyrrolidone) (PVP)-stabilized ruthenium colloidal clusters wereprepaxed via the reduction of ruthenium(III) chloride by refluxing with low boiling point alcohols. Investigation of the size ofRu colloids by transmission electron microscopy (TEM) indicated that the average diametes could be controlled in the rangeof 1.2-1.6 nm with relative standard deviations of less than 0.33 by changing the molar ratio of PVP to Ru. The X-rayphotoelectron spectroscopy (XPS) characterization verified the formation of elemental ruthenium colloids.

Effect of TiO_2 Nanoparticles on Photochromism of WO_3 Colloids

WO2 and TiO2 colMds were synthesized by the hydrolysis technique and part of the TiO2 colloid was treated by means of the hydrothermal method. The photochromic performances of the resulting materials obtained via combining the WO3 colloid with the treated TiO2 colloid and the non-treated TiO2 colloid, respectively, are very different. The TiO2 colloid without hydrothermal treatment can effectively improve the photochromic performance of the WO3colloid. The TiO2 nanoparticles were investigated in detail by XRD, TEM, surface photovohage spectra（SPS） and field-induced surface photovoltage spectrometry（FISPS）. The photochromism mechanism of WO3 colloid is discussed.

PREPARATION OF POLYMER MICROSPHERES WITH PYRIDYL GROUP AND THEIR STABILIZED GOLD METALLIC COLLOIDS

Narrow disperse poly（ethyleneglycol dimethacrylate-co-4-vinylpyridine） （poly（EGDMA-co-4-VPy）） microspheres were prepared by distillation-precipitation copolymerization of ethyleneglycol dimethacrylate （EGDMA） and 4-vinylpyridine （4-VPy） with 2,2＇-azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile. The polymer microspheres containing pyridyl group were then utilized as stabilizer for gold metallic colloids with the diameter around 7 nm, which were prepared by the in situ reduction of gold chloride trihydrate with sodium borohydride through the coordination of the pyridyl group on the gel layer and surface of the microsphere with the gold metallic nano-particles. The catalytic properties of the pyridyl- functionalized microsphere-stabilized gold metallic colloids and the behavior of the stabilized-catalyst for the recycling were investigated with reduction of 4-nitrophenol to 4-aminophenol as a model reaction.

Surface Chemical Properties of Colloids in Main Soils of China

Surface chemical properties of soil colloids are the important factor affecting soil fertility and genesis. To provide scientific basis for soil genetic classification, promotion of soil fertility and reasonable fertilization, the specific surface area and electric charge of soil colloids in relation to clay minerals and organic matter are further discussed on the basis of the results obtained from the studies on surface chemical properties of soil colloids in five main soils of China. Results from the studies show that the effect of clay minerals and organic matter on the surface chemical properties of soil colloids is very complicated because the siloxane surface, hydrated oxide surface and organic matter surface do not exist separately, but they are always mixed together and influenced each other. The understanding of the relationship among clay minerals, organic matter and surface chemical properties of soil colloids depends upon further study of the relevant disciplines of soil science, especially the study on the mechanisms of organo-mineral complexes.

Chemical Mechanism of Flocculation and Deposition of Clay Colloids in Coastal Aquifers

Seawater intrusion has become one of serious environmental problems in coastal areas. During the replacement of saline water by fresh water in the aquifers, in-situ clay could be released, transport and deposit in the porous media due to the change of hydrodynamic and geochemical conditions, which resulted in the increasing of particle size, plugging of pores and reduction of the permeability. Batch experiments and sand column experiments were explored to study the relationships between the flocculation of in-situ clay and geochemical conditions, by changing ionic strength and ionic type of clay suspension. Column outflow was analyzed for suspended particles and electrical conductivity. The total percentage of colloid straining and interception distribution in porous media was calculated. The results indicate that porous media had an effect on the interception of clay colloid particles with about 10 percent clay colloids captured due to the rough surfaces and spatial structure of porous media. Ionic strength played a key role on the permeability reductions. The higher ionic strength is, the greater the amount of colloidal particles trapped. Ionic type also had a significant effect on the interception of clay colloid particles. Ripening was the main mechanism for the interception within porous media when the bulk solution was potassium chloride while blocking happened when the bulk solution was sodium chloride. The distribution of clay colloids in porous media was heterogeneous. The closer to the sand column inlet was the less interception of clay colloids was. The results can provide the scientific basis for preventing the water sensitivity during the process of salty aquifer restoration.

Effect of Aqueous Colloids on Arsenic Geochemistry:Evidences from Ultrafiltration of High Arsenic Groundwater in the Hetao Basin,Inner Mongolia

Groundwater colloidal particles are believed to affect element geochemical behavior in groundwaters, which would mobilize trace element in the groundwater system.Investigation of As geochemisttry as impacted by colloids was carried out by using ultrafiltration technology in the Hetao basin,Inner Mongolia.Six groundwater sampling points have been chosen,including five with high As concentration (】100μg/L) and one with low As concentra-

An oxygenating colloidal bioink for the engineering of biomimetic tissue constructs

Ensuring a sufficient oxygen supply is pivotal for the success of bioprinting applications since it fosters tissue integration and natural regeneration.Variation in oxygen concentration among diverse tissues necessitates the precise recreation of tissue-specific oxygen levels in imprinted constructs to support the survival of targeted cells.Although oxygen-releasing biomaterials,such as oxygen-generating microparticles(OMPs),have shown promise for enhancing the oxygen supply of microenvironments in injured tissues,whether this approach is scalable for large tissues and whether tissue-specific bioinks with varying OMP concentrations remain printable remain unknown.This study addresses this critical gap by introducing an innovative class of engineered oxygenated bioinks that combine colloidal-based microgels with OMPs.We report that incorporating nanosized calcium peroxide(nCaO_(2))and manganese oxide nanosheets(nMnO_(2))into hydrophobic polymeric microparticles enables precise modulation of oxygen release while controlling hydrogen peroxide release.Moreover,the fabrication of oxygenating and cytocompatible colloidal gels is achieved using an aqueous two-phase system.This study thoroughly evaluates the fundamental characteristics of the resulting bioink,including its rheological behaviors,printability,shape fidelity,mechanical properties,and oxygen release properties.Moreover,this study demonstrates the macroscopic scalability and cytocompatibility of printed constructs produced via cell-laden oxygenating colloidal bioinks.By showcasing the effectiveness of extrusion-based bioprinting,this study underscores how it can be used to fabricate biomimetic tissues,indicating its potential for new applications.The findings presented here advance the bioprinting field by achieving scalability with both high cell viability and the possibility of mimicking specifically oxygenated tissues.This work thereby offers a promising avenue for the development of functional tissues with enhanced physiological relevance.

SURFACE-ENHANCED RAMAN SPECTRA OF p-AMINOBENZOIC ACID ADSORBED ON Ag2CO3 COLLOIDS

It was observed that the p-aminobenzoic acid(PABA)molecules adsorbed on A92CO3 colloids exhibited strong SERS effect,the enhancement factor is estimated at 10~7—10~8 The mechanism of SERS effect on PABA adsorbed on the colloids was discussed.

Depinning Dynamics of Two-Dimensional Charged Colloids on a Random Laser-Optical Substrate

Using Langevin simulations, we. investigate the depinning dynamics of two-dimensional charged colloids on a random laser-optical substrate. With an increase in the strength of the substrate, we find a transition from crystal to smectic flows above the depinning. A power-law scaling relationship between average velocity and applied driving force could be obtained for both flows, and we find that the scaling exponents are no bigger than 1 for the crystal and are bigger than 1 for the smectic flows.

Special Issue:Carbohydrate Hydrocolloids in Food Systems:from Structure to Human Health

Preface Carbohydrate hydrocolloids mainly refer to the carbohydrate polymers and oligomers that can form colloidal systems when dispersed in water.A great variety of these poly saccharides and oligosaccharides are used as functional food additives,such as starch,modified starch,pectin,xanthan,carrageenans,gellan gum,alginate,galactomannans(e.g.,guar gum and locust bean gum),gum Arabic or acacia gum,gum karaya,gum tragacanth,carboxymethyl cellulose,and various oligosaccharides,to name but a few.

INFLUENCES OF SEVERAL SOIL COLLOIDS ON THE ADSORPTION AND PROPERTIES OF UREASE ENZYME

The present experiment was designed to elucidate the effects of the sterilized colloids separated from red soil,latosol and yellow brown soil,which are the typical zonal soils in central-south China, on the adsorption,activity,kinetic parameters and thermal stability of urease enzyme which plays significant role in the transformation of soil nitrogen compounds. Results show that the amount of enzyme adsorbed on the examined soil colloids followed the order: yellow brown soil>red soil=latosol. The residual activities of enzyme in different colloid systems are in the following sequence:red soil>latosol> yellow brown soil. The thermal stability of adsorbed enzyme is higher than that of free enzyme. The enzyme immobilized on yellow brown soil colloid had the highest stability at elevated temperature from 60 to 80℃. Both of the free and immobilized urease obey Michaelis-Menten kinetics. The Km values of immobilized urease (13. 5-20. 8 mM) on different soil colloids examined were in the same order of magnitude as that of free urease (9. 3mM). The kinetic constant of immobilized enzyme suggests that urease adsorbed on yellow brown soil colloid has a greater affinity for substrate. The Ku and Vmax values also indicate a mixed type of enzyme inhibition for the examined soil colloids. These results provide basic evidences for the understanding of the properties and kinetics of soil enzymes in tropic and subtropic regions.

Characterization and stability of sedimentary colloids in different ecology regions in Taihu Lake

Colloidal particles,heterogeneous mixture with various organic components and continuous molecular weight(MW)distribution,is omnipresent in lake sediments and substantially influence the retention,transportation,and fate of contaminants in lake ecosystem.We sampled and extracted sedimentary colloids from different ecology regions in Taihu Lake,Jiangsu,East China,in June 2020,and they were further separated into four different particle size ranges by tangent ultrafiltration,and the properties of colloids were studied in various methods,including zeta potential analysis,transmission electron micrograph images(TEM),Fourier transformation infrared(FTIR),and 3D fluorescence.Results show that the surface of the colloids is covered with organic macromolecular substances,such as humuslike substances and protein-like substances.There were significant differences in molecular weight and fraction content of colloids in the sediments from macrophyte-dominant(MD)area and algae-dominant(AD)area in the lake.Colloids from MD area are mainly composed of humic acid,protein,and fulvic acid;the content of fulvic acid is lower than that of humic acid and protein.The humic acid exists mainly in small molecular weight(10-100 kDa),protein exists in mainly large molecular weight colloids(0.45-1μm).Colloids from AD area are mainly composed of humic acid,and mainly distributed in the molecular weight(10 kDa-0.45μm).The presence of humic acid inhibits effectively the agglomeration of the colloids.Especially,the stability of colloids is closely related to the molecular weight,with low molecular weight from MD area show higher stability.The existence of humic acid in colloids increases the electrostatic repulsion between colloidal particles,which can effectively inhibit the agglomeration of colloids,thus enhancing the stability of colloids.Furthermore,both monovalent and divalent electrolytes enhance colloidal aggregation,and the low-molecular-weight(LMW)colloid fraction exhibits higher stability efficiency than the high-molecular-weight(HMW)colloidal.

SYNTHESIS OF POLYMER-STABILIZED PLATINUM/RUTHENIUM BIMETALLIC COLLOIDS AND THEIR CATALYTIC PROPERTIES FOR SELECTIVE HYDROGENATION OF CROTONALDEHYDE

Polymer-stabilized platinum/ruthenium bimetallic colloids （Pt/Ru） were synthesized by polyol reduction with microwave irradiation and characterized by TEM and XPS. The colloidal nanoparticles have small and narrow size distributions. Catalytic performance of the Pt/Ru colloidal catalysts was investigated on the selective hydrogenation of crontonaldehyde （CRAL）. A suitable amount of the added metal ions and base can improve the selectivity of CRAL to crotylalcohol （CROL） remarkably. The catalytic activity and the selectivity are dependent on the compositions of bimetallic colloids. Thereinto, PVP-stabilized 9Pt/1Ru colloid with a molar ratio of metals Pt：Ru = 9：1 shows the highest catalytic selectivity 77.3% to CROL at 333 K under 4.0 MPa of hydrogen.

Photostability of colloidal single photon emitter in near-infrared regime at room temperature

The photostability of a colloidal single photon emitter in near-infrared regime at room temperature is investigated.The fluorescence lifetime,blinking phenomenon,and anti-bunching effect of a single CdTeSe/ZnS quantum dot with an emission wavelength of 800 nm at room temperature are studied.The second-order correlation function at zero delay time is much smaller than 0.1,which proves that the emission from single quantum dots at 800 nm is a highly pure single-photon source.The effects of the irradiation duration on the fluorescence from single quantum dots are analyzed.The experimental results can be explained by a recombination model including a multi-nonradiative recombination center model and a multi-charged model.

Radionuclide Colloid ^(32)P Used for the Treatment of Stage II Lung Cancer by Video Enhanced Minimal Access Muscle Sparing Thoracotomy

Objective: To study the feasibility of radionuclide colloid 32P used for the treatment of stage II lung cancer by video enhanced minimal access muscle sparing thoracotomy (VEMAST). Methods: Video assisted thoracoscopic surgery (VATS) was carried out under general anesthesia. A double lumen endobronchial tube was intubated into trachea. One lung ventilation of the healthy side was done during operation. An incision of 8–10 cm long was made along the 4th or 5th intercostals. The lobectomy could be performed under VATS. Radionuclide colloid 32P was injected locally into the area where surgical cleaning of lymph node around was considered to be unsatisfactory or desection of the tumor was not completed. Results: The operation with VEMAST was successful in 29 patients. A conventional lobectomy by thoracotomy had to be done due to unusual bleeding from the pulmonary artery involved during VEMAST in one case and the procedure was interrupted because the pulmonary artery cloud not be separated from the tumor in another patient. There was no dead case or the patient who had any severe complication or adverse response to the radiant. Conclusion: Radionuclide therapy was performed to the treatment of stage II lung cancer with VEMAST in case that surgical resection was considered not to be satisfactory. Minithoractomy assisted with VATS lobectomy and radionuclide colloid 32P therapy is a safe and e?ective technique for some selected stage II lung cancer.