In the metrology of radon, an environmental lung carcinogen, the integrated measurements necessary for epidemiological studies are made very often using the tracks detector LR 115 type 2. For dosimetric analysis, the ...In the metrology of radon, an environmental lung carcinogen, the integrated measurements necessary for epidemiological studies are made very often using the tracks detector LR 115 type 2. For dosimetric analysis, the etched tracks from radon alpha particles on this detector are usually counted by means of an optical microscope or a spark counter. An optimal reading of the track densities which must be converted into radon concentrations, can’t be done without a good mastery of the mode of operation and use of these devices. Furthermore, investigations to know as to whether or not each of those can be used to determine radon concentration are necessary. These are the objectives of the present work in which LR 115 samples exposed to radon for at least 3 months, were chemically developed under standard conditions and read. The track densities obtained with the microscope are very much higher than those of the counter for each sample. These results are consistent with those published by other authors. However, each of these devices can be used interchangeably for alpha tracks counting, as both provide radon concentrations with a very good linear correlation coefficient of 0.95 taking into account their respective calibration factors for the reading of this detector. In addition, the saturation phenomenon for the spark counter reading of LR 115 detector occurs beyond 11,000 tr/cm<sup>2</sup>, a density never reached during our environmental radon measurements.展开更多
Taking a propfan engine as the research object,the CFD method was used for 3D modeling and unsteady slip flow for numerical calculation.The propfan rotation domain and the nacelle outside flow domain were meshed by us...Taking a propfan engine as the research object,the CFD method was used for 3D modeling and unsteady slip flow for numerical calculation.The propfan rotation domain and the nacelle outside flow domain were meshed by using the partition splicing grid technology.Used the Reynolds⁃averaged of N⁃S equation,the Reynolds stress term uses the RNG turbulence model;and based on the slip grid method,numerical calculation of the flow field with different Mach numbers,front and rear blade angles and engine state were carried out;and the change law of propeller fan characteristics and the influence of slip flow on the inlet flow field were analyzed.The blade angle was the key parameter of the propeller fan characteristic conditions.When the blade angle increases from 41°to 50°,the thrust coefficient increases by 31.2%,and the power coefficient increases by 33.4%;in the climbing state of the propeller fan,the maximum total pressure distortion at the inlet port of 6.8%;the cross section is less affected by the slip flow of the propfan;and the pressure distribution is relatively uniform,but the area of the flow channel is small.The research results can provide a solution for the matching of the counter⁃rotating propeller fan and the engine and the arrangement of the air inlet measuring rake.展开更多
文章通过对Counting Online Usage of Networked Electronic Resources Codes of Practice(COUNTER)项目的成立背景、组织成员、日常管理、业务的介绍以及其成功因素的分析,认为我国也亟需加强对数字期刊及其他资源利用情况的统计,并提...文章通过对Counting Online Usage of Networked Electronic Resources Codes of Practice(COUNTER)项目的成立背景、组织成员、日常管理、业务的介绍以及其成功因素的分析,认为我国也亟需加强对数字期刊及其他资源利用情况的统计,并提出了相关建议。展开更多
提出了一种基于双层Counter Bloom Filter的长流识别算法(algorithm based on double counter bloom filter for long flows identification,简称CCBF).该算法使用两层Counter Bloom Filter结构,将长流过滤和长流存在分开处理.分析了该...提出了一种基于双层Counter Bloom Filter的长流识别算法(algorithm based on double counter bloom filter for long flows identification,简称CCBF).该算法使用两层Counter Bloom Filter结构,将长流过滤和长流存在分开处理.分析了该算法的误判率,通过模拟数据分析了算法错误率和内存资源限制的关系,并在相同内存资源限制的条件下,将该算法与类似算法的准确性进行了比较.结果表明,在数据量较大的情况下,该算法具有比现有算法更小的平均错误率;对算法的时间效率分析表明,该算法可以达到1500kpps的处理速度.各项指标反映出,该算法可以应用于大规模主干网的长流监测.展开更多
文摘In the metrology of radon, an environmental lung carcinogen, the integrated measurements necessary for epidemiological studies are made very often using the tracks detector LR 115 type 2. For dosimetric analysis, the etched tracks from radon alpha particles on this detector are usually counted by means of an optical microscope or a spark counter. An optimal reading of the track densities which must be converted into radon concentrations, can’t be done without a good mastery of the mode of operation and use of these devices. Furthermore, investigations to know as to whether or not each of those can be used to determine radon concentration are necessary. These are the objectives of the present work in which LR 115 samples exposed to radon for at least 3 months, were chemically developed under standard conditions and read. The track densities obtained with the microscope are very much higher than those of the counter for each sample. These results are consistent with those published by other authors. However, each of these devices can be used interchangeably for alpha tracks counting, as both provide radon concentrations with a very good linear correlation coefficient of 0.95 taking into account their respective calibration factors for the reading of this detector. In addition, the saturation phenomenon for the spark counter reading of LR 115 detector occurs beyond 11,000 tr/cm<sup>2</sup>, a density never reached during our environmental radon measurements.
文摘Taking a propfan engine as the research object,the CFD method was used for 3D modeling and unsteady slip flow for numerical calculation.The propfan rotation domain and the nacelle outside flow domain were meshed by using the partition splicing grid technology.Used the Reynolds⁃averaged of N⁃S equation,the Reynolds stress term uses the RNG turbulence model;and based on the slip grid method,numerical calculation of the flow field with different Mach numbers,front and rear blade angles and engine state were carried out;and the change law of propeller fan characteristics and the influence of slip flow on the inlet flow field were analyzed.The blade angle was the key parameter of the propeller fan characteristic conditions.When the blade angle increases from 41°to 50°,the thrust coefficient increases by 31.2%,and the power coefficient increases by 33.4%;in the climbing state of the propeller fan,the maximum total pressure distortion at the inlet port of 6.8%;the cross section is less affected by the slip flow of the propfan;and the pressure distribution is relatively uniform,but the area of the flow channel is small.The research results can provide a solution for the matching of the counter⁃rotating propeller fan and the engine and the arrangement of the air inlet measuring rake.
文摘文章通过对Counting Online Usage of Networked Electronic Resources Codes of Practice(COUNTER)项目的成立背景、组织成员、日常管理、业务的介绍以及其成功因素的分析,认为我国也亟需加强对数字期刊及其他资源利用情况的统计,并提出了相关建议。
文摘提出了一种基于双层Counter Bloom Filter的长流识别算法(algorithm based on double counter bloom filter for long flows identification,简称CCBF).该算法使用两层Counter Bloom Filter结构,将长流过滤和长流存在分开处理.分析了该算法的误判率,通过模拟数据分析了算法错误率和内存资源限制的关系,并在相同内存资源限制的条件下,将该算法与类似算法的准确性进行了比较.结果表明,在数据量较大的情况下,该算法具有比现有算法更小的平均错误率;对算法的时间效率分析表明,该算法可以达到1500kpps的处理速度.各项指标反映出,该算法可以应用于大规模主干网的长流监测.
