目的针对国内处理原料气在气质较富时乙烷回收装置单一、产物回收率低的问题,在原有工艺冷干气回流流程(cold residue reflux process,CRR)的基础上提出两种高效乙烷回收流程,即带闪蒸的冷干气回流流程(cold residue reflux process wit...目的针对国内处理原料气在气质较富时乙烷回收装置单一、产物回收率低的问题,在原有工艺冷干气回流流程(cold residue reflux process,CRR)的基础上提出两种高效乙烷回收流程,即带闪蒸的冷干气回流流程(cold residue reflux process with flash evaporator,CRR-FE)和部分原料气过冷分离的冷干气回流流程(cold residue reflux process with feed subcooled,CRR-PS)。方法在保证乙烷回收率高于95%的条件下,利用HYSYS软件模拟改进工艺流程,设置了3组逐渐变富的气质对CRR及改进流程进行了综合能耗和火用分析对比。结果改进后的流程有很好的节能效果,其中CRR-PS流程节能效果明显,在GPM值为4.3时,CRR-PS流程综合能耗节约了9.4%。3种流程火用损最大为主体设备压缩机中的外输压缩机,其次是塔设备中脱甲烷塔和丙烷制冷,最后是换热器、空冷器及水冷器;改进后的流程性能很好,整体火用效率在80%以上,总火用效率排序为CRR-PS>CRR-FE>CRR;当GPM值为4.3时,CRR-PS火用损为28471 kW,相比于CRR降低了3.9%,表明CRR-PS火用损失较少,有很好的节能潜力。结论CRR-PS流程对富气适应性更强,节能效果更好。展开更多
We investigate systematically the effects of the inter-particle attraction on the structure and dynamical behaviors of glass-forming liquids via molecular dynamics simulations.We find that the inter-particle attractio...We investigate systematically the effects of the inter-particle attraction on the structure and dynamical behaviors of glass-forming liquids via molecular dynamics simulations.We find that the inter-particle attraction does not influence the structure,but greatly affects the dynamics and dynamical heterogeneity of the system.After the system changes from a purely repulsive glass-forming liquid to an attractive one,the dynamics slows down and the dynamical heterogeneity becomes greater,which is found interestingly to be associated with larger cooperative rearrangement regions(CRRs).Additionally,the structures of CRRs are observed to be compact in attractive glass-forming liquids but string-like in purely repulsive ones.Our findings constitute an important contribution to the ongoing study of the role of attractions in properties of glasses and glass-forming liquids.展开更多
To elucidate the molecular mechanisms underlying cellular radioresistance, clinically relevant radioresistant cell lines were established via long-term exposure to X-rays with stepwise dose escalation. Established cel...To elucidate the molecular mechanisms underlying cellular radioresistance, clinically relevant radioresistant cell lines were established via long-term exposure to X-rays with stepwise dose escalation. Established cells continue to proliferate despite exposure to 2 Gy X-rays/day for more than 30 days, a standard protocol in cancer radiotherapy. DNA repair fidelity in radioresistant and the parental cells by evaluating the mutation frequency at the hypoxanthine phosphoribosyltransferase (HPRT) locus after exposure to X-rays was determined. Mutation spectrum at the HPRT locus was examined by multiplex polymerase chain reaction. Rejoining kinetics of X-ray-induced DNA double strand breaks (dsbs) was evaluated by the detection of phosphorylated histone H2AX (γH2AX) after X-irradiation. The fold increase in the HPRT mutation frequency due to acute radiation was similar between radioresistant and the parental cell lines. However, fractionated radiation (FR) consisting of 2 Gy X-rays/day increased the mutation frequency at the HPRT locus in parental but not in radioresistant cells. Analysis of the FR-induced mutations at the HPRT locus revealed a high frequency of deletion mutations (>70%) in parental but not in radioresistant cells. As assessed by γH2AX immunostaining, DNA dsbs induced by acute exposure to 10 Gy of X-rays were repaired to the control level within 7 days in radioresistant but not in the parental cells. Moreover, 2 Gy × 5 FR increased the number of γH2AX-positive cells in parental cultures but not in radioresistant cultures. DNA dsbs induced by 2 Gy/day FR are repaired with fidelity in radioresistant but not in parental cells.展开更多
In this study, a backpropagation neural network algorithm was developed in order to predict the liquefaction cyclic resistance ratio (CRR) of sand-silt mixtures. A database, consisting of sufficient published data of ...In this study, a backpropagation neural network algorithm was developed in order to predict the liquefaction cyclic resistance ratio (CRR) of sand-silt mixtures. A database, consisting of sufficient published data of laboratory cyclic triaxial, torsional shear and simple shear tests results, was collected and utilized in the ANN model. Several ANN models were developed with different sets of input parameters in order to determine the model with best performance and preciseness. It has been illustrated that the proposed ANN model can predict the measured CRR of the different data set which was not incorporated in the developing phase of the model with the good degree of accuracy. The subsequent sensitivity analysis was performed to compare the effect of each parameter in the model with the laboratory test results. At the end, the participation or relative importance of each parameter in the ANN model was obtained.展开更多
Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice ar...Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice are generally based on simplified procedures for the evaluation of the liquefaction potential. The work describes a framework for performance-based earthquake engineering and its use in the development of a performance-based procedure for liquefaction hazard evaluation. The performance-based procedure will be used to show how consistent application of conventional procedures for evaluation of liquefaction potential can influence performance prediction. Implications for liquefaction-resistant design will also be discussed. The purpose is to summarize current procedures for practical prediction of liquefaction behavior, to describe recent advances in the understanding of liquefaction behavior, and to describe the incorporation of this improved understanding into new solutions for detailed modeling of soil liquefaction, Simplified procedures for evaluation of liquefaction hazards will be reviewed relatively briefly, with more details devoted to emerging knowledge about the mechanics of liquefiable soil behavior, and methods for incorporating those mechanics into improved models for performance prediction. In particular it focuses about the influence on the evaluation of Cyclic Resistance Ratio （CRR） by different in-situ tests （Cone Penetration Test （CPT）. Standard Penetration Test （SPT） and Seismic Dilatometer Marchetti Test （SDMT）） and by different shear waves velocity measurements （Down Hole D-H. Cross Hole C-H, Seismic Dilatometer Marchetti Test SDMT）.展开更多
文摘目的针对国内处理原料气在气质较富时乙烷回收装置单一、产物回收率低的问题,在原有工艺冷干气回流流程(cold residue reflux process,CRR)的基础上提出两种高效乙烷回收流程,即带闪蒸的冷干气回流流程(cold residue reflux process with flash evaporator,CRR-FE)和部分原料气过冷分离的冷干气回流流程(cold residue reflux process with feed subcooled,CRR-PS)。方法在保证乙烷回收率高于95%的条件下,利用HYSYS软件模拟改进工艺流程,设置了3组逐渐变富的气质对CRR及改进流程进行了综合能耗和火用分析对比。结果改进后的流程有很好的节能效果,其中CRR-PS流程节能效果明显,在GPM值为4.3时,CRR-PS流程综合能耗节约了9.4%。3种流程火用损最大为主体设备压缩机中的外输压缩机,其次是塔设备中脱甲烷塔和丙烷制冷,最后是换热器、空冷器及水冷器;改进后的流程性能很好,整体火用效率在80%以上,总火用效率排序为CRR-PS>CRR-FE>CRR;当GPM值为4.3时,CRR-PS火用损为28471 kW,相比于CRR降低了3.9%,表明CRR-PS火用损失较少,有很好的节能潜力。结论CRR-PS流程对富气适应性更强,节能效果更好。
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11704270,12074275,and 11574222)Jiangsu Planned Projects for Postdoctoral Research Funds+1 种基金the PAPD Program of Jiangsu Higher Education Institutionsthe Start-up Fund from Anhui University (Grant No. S020318001/02)
文摘We investigate systematically the effects of the inter-particle attraction on the structure and dynamical behaviors of glass-forming liquids via molecular dynamics simulations.We find that the inter-particle attraction does not influence the structure,but greatly affects the dynamics and dynamical heterogeneity of the system.After the system changes from a purely repulsive glass-forming liquid to an attractive one,the dynamics slows down and the dynamical heterogeneity becomes greater,which is found interestingly to be associated with larger cooperative rearrangement regions(CRRs).Additionally,the structures of CRRs are observed to be compact in attractive glass-forming liquids but string-like in purely repulsive ones.Our findings constitute an important contribution to the ongoing study of the role of attractions in properties of glasses and glass-forming liquids.
文摘To elucidate the molecular mechanisms underlying cellular radioresistance, clinically relevant radioresistant cell lines were established via long-term exposure to X-rays with stepwise dose escalation. Established cells continue to proliferate despite exposure to 2 Gy X-rays/day for more than 30 days, a standard protocol in cancer radiotherapy. DNA repair fidelity in radioresistant and the parental cells by evaluating the mutation frequency at the hypoxanthine phosphoribosyltransferase (HPRT) locus after exposure to X-rays was determined. Mutation spectrum at the HPRT locus was examined by multiplex polymerase chain reaction. Rejoining kinetics of X-ray-induced DNA double strand breaks (dsbs) was evaluated by the detection of phosphorylated histone H2AX (γH2AX) after X-irradiation. The fold increase in the HPRT mutation frequency due to acute radiation was similar between radioresistant and the parental cell lines. However, fractionated radiation (FR) consisting of 2 Gy X-rays/day increased the mutation frequency at the HPRT locus in parental but not in radioresistant cells. Analysis of the FR-induced mutations at the HPRT locus revealed a high frequency of deletion mutations (>70%) in parental but not in radioresistant cells. As assessed by γH2AX immunostaining, DNA dsbs induced by acute exposure to 10 Gy of X-rays were repaired to the control level within 7 days in radioresistant but not in the parental cells. Moreover, 2 Gy × 5 FR increased the number of γH2AX-positive cells in parental cultures but not in radioresistant cultures. DNA dsbs induced by 2 Gy/day FR are repaired with fidelity in radioresistant but not in parental cells.
文摘In this study, a backpropagation neural network algorithm was developed in order to predict the liquefaction cyclic resistance ratio (CRR) of sand-silt mixtures. A database, consisting of sufficient published data of laboratory cyclic triaxial, torsional shear and simple shear tests results, was collected and utilized in the ANN model. Several ANN models were developed with different sets of input parameters in order to determine the model with best performance and preciseness. It has been illustrated that the proposed ANN model can predict the measured CRR of the different data set which was not incorporated in the developing phase of the model with the good degree of accuracy. The subsequent sensitivity analysis was performed to compare the effect of each parameter in the model with the laboratory test results. At the end, the participation or relative importance of each parameter in the ANN model was obtained.
文摘Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice are generally based on simplified procedures for the evaluation of the liquefaction potential. The work describes a framework for performance-based earthquake engineering and its use in the development of a performance-based procedure for liquefaction hazard evaluation. The performance-based procedure will be used to show how consistent application of conventional procedures for evaluation of liquefaction potential can influence performance prediction. Implications for liquefaction-resistant design will also be discussed. The purpose is to summarize current procedures for practical prediction of liquefaction behavior, to describe recent advances in the understanding of liquefaction behavior, and to describe the incorporation of this improved understanding into new solutions for detailed modeling of soil liquefaction, Simplified procedures for evaluation of liquefaction hazards will be reviewed relatively briefly, with more details devoted to emerging knowledge about the mechanics of liquefiable soil behavior, and methods for incorporating those mechanics into improved models for performance prediction. In particular it focuses about the influence on the evaluation of Cyclic Resistance Ratio （CRR） by different in-situ tests （Cone Penetration Test （CPT）. Standard Penetration Test （SPT） and Seismic Dilatometer Marchetti Test （SDMT）） and by different shear waves velocity measurements （Down Hole D-H. Cross Hole C-H, Seismic Dilatometer Marchetti Test SDMT）.
