In this paper .fatigue strength of T-type tubularjoints subjected to in-planebending or out-of-plane bending load is investigated By, considering material constantsand initial crack sizes as random variables and appl...In this paper .fatigue strength of T-type tubularjoints subjected to in-planebending or out-of-plane bending load is investigated By, considering material constantsand initial crack sizes as random variables and applying Monte Carlo simulation method, we have giyen a statistical analvsis on fatigue life. Simultaneously, linearregression analyses of computed resuldts are performed and compared with that of theknown experimental data.展开更多
Optimization of design features of reinforced sheet is investigated. Initially, equations governing composite structures are extracted based on Kirchhoff sheet model under bending using Hamilton's principal. Then,...Optimization of design features of reinforced sheet is investigated. Initially, equations governing composite structures are extracted based on Kirchhoff sheet model under bending using Hamilton's principal. Then, design parameters for the composite structure are extracted with simple supportive boundary conditions from proposed solution. Next, optimization is achieved by determining dimensions of a reinforced sheet specimen. Weight optimization of reinforced sheet structure has been obtained based on variations in thickness and number of longitudinal and transverse reinforcements. Buckling static characteristic is utilized in optimization process. To solve the extracted equations, semi-analytical method of CS-DSG3 has been applied. Results are presented in graphs that show variation of design parameters by changing the geometric parameters. ABAQUS software has been used for design verification. The results show that an increase in thickness of 3 mm skip value tends to be zero. Also, there is a change in the amount of deflection for sheets with a minimum thickness of 3 mm by increasing the number of longitudinal and transverse reinforcement. There is a good agreement between the numerical method of finite elements and the method X-FEM-DSG3.展开更多
The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital...The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital of the CS<sub>2</sub> molecule, which can be well described by Gaussian wave packet using GAMESS-UK package. Compared with the case of the elliptical laser, the HHG can be extended in two-color circularly polarized laser field. The time-frequency analysis and classical electron trajectory as well as the ionization yield curve are also presented to further explain the underlying mechanism. After adding a static electric field on the z-direction, the single quantum path control is realized and the supercontinuum spectra are obtained. Moreover, an isolated 110 as pulse can be obtained by superposing the harmonics from 130th to 180th order.展开更多
Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of s...Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of surface chemical structure,microcosmic morphology and thermodynamic property were investigated by Fourier transform infrared spectroscopy( FTIR),X-ray photoelectron spectroscopy( XPS), scanning electron microscope( SEM), X-ray diffraction technique( XRD), and thermo gravimetric analysis( TGA),respectively. The wettability and antistatic property of PET fiber were significantly improved after modification by SE and CS.展开更多
采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性...采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性与强度UCS的影响。模型试验研究发现,通过多层互剪搅拌能够根除地表冒浆、防止糊钻抱钻、提高固化材料利用率。18组模型试验结果阐明搅拌桩在T-E-UCS之间存在固有关联,并揭示出机械参数、输出能量与桩身强度之间的本质关系。提供的计算方法可以定性指导选取合理的工艺参数,实现桩身设计强度目标。作为重要工艺因素,内外钻杆转速比RN与桩身强度试验曲线存在极值点,建议在工程中将1.80~2.20作为获取桩身峰值强度的最优RN值域。CS-DSM工法应用的系列研究结果为高质量搅拌桩工艺控制原则和质量保障体系提供了试验依据。展开更多
文摘In this paper .fatigue strength of T-type tubularjoints subjected to in-planebending or out-of-plane bending load is investigated By, considering material constantsand initial crack sizes as random variables and applying Monte Carlo simulation method, we have giyen a statistical analvsis on fatigue life. Simultaneously, linearregression analyses of computed resuldts are performed and compared with that of theknown experimental data.
文摘Optimization of design features of reinforced sheet is investigated. Initially, equations governing composite structures are extracted based on Kirchhoff sheet model under bending using Hamilton's principal. Then, design parameters for the composite structure are extracted with simple supportive boundary conditions from proposed solution. Next, optimization is achieved by determining dimensions of a reinforced sheet specimen. Weight optimization of reinforced sheet structure has been obtained based on variations in thickness and number of longitudinal and transverse reinforcements. Buckling static characteristic is utilized in optimization process. To solve the extracted equations, semi-analytical method of CS-DSG3 has been applied. Results are presented in graphs that show variation of design parameters by changing the geometric parameters. ABAQUS software has been used for design verification. The results show that an increase in thickness of 3 mm skip value tends to be zero. Also, there is a change in the amount of deflection for sheets with a minimum thickness of 3 mm by increasing the number of longitudinal and transverse reinforcement. There is a good agreement between the numerical method of finite elements and the method X-FEM-DSG3.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11574117,11271158,61575077 and 11575071
文摘The high harmonic generation (HHG) from the CS<sub>2</sub> molecule in intense laser fields is investigated using the extended Lewenstein method. The initial state is the highest-occupied molecular orbital of the CS<sub>2</sub> molecule, which can be well described by Gaussian wave packet using GAMESS-UK package. Compared with the case of the elliptical laser, the HHG can be extended in two-color circularly polarized laser field. The time-frequency analysis and classical electron trajectory as well as the ionization yield curve are also presented to further explain the underlying mechanism. After adding a static electric field on the z-direction, the single quantum path control is realized and the supercontinuum spectra are obtained. Moreover, an isolated 110 as pulse can be obtained by superposing the harmonics from 130th to 180th order.
文摘Sucrose ester( SE) was fixed on surface of poly( ethylene terephthalate)( PET) fibers to improve surface activity. Chitosan( CS) was used to graft onto pretreated PET fibers by sol-gel method. The transformations of surface chemical structure,microcosmic morphology and thermodynamic property were investigated by Fourier transform infrared spectroscopy( FTIR),X-ray photoelectron spectroscopy( XPS), scanning electron microscope( SEM), X-ray diffraction technique( XRD), and thermo gravimetric analysis( TGA),respectively. The wettability and antistatic property of PET fiber were significantly improved after modification by SE and CS.
文摘采用模型试验方法,对多层互剪搅拌桩工法(contra-rotational shear deep soil mixing,简称CS-DSM工法)的工艺因素进行了试验研究,探索了水泥掺量、单位桩长搅拌次数T、单位体积搅拌能量E以及内外钻杆转速比RN等工艺因素对搅拌桩均匀性与强度UCS的影响。模型试验研究发现,通过多层互剪搅拌能够根除地表冒浆、防止糊钻抱钻、提高固化材料利用率。18组模型试验结果阐明搅拌桩在T-E-UCS之间存在固有关联,并揭示出机械参数、输出能量与桩身强度之间的本质关系。提供的计算方法可以定性指导选取合理的工艺参数,实现桩身设计强度目标。作为重要工艺因素,内外钻杆转速比RN与桩身强度试验曲线存在极值点,建议在工程中将1.80~2.20作为获取桩身峰值强度的最优RN值域。CS-DSM工法应用的系列研究结果为高质量搅拌桩工艺控制原则和质量保障体系提供了试验依据。