PREPARING NANO-CRYSTALLINE La DOPED WC/Co POWDER BY HIGH ENERGY BALL MILLING

The La doped WC/Co powder was prepared by high energy ball milling. The changes of crystal structure, micrograph and defect of the powder were investigated by means of XRD (X-ray diffraction), SEM (scanning electron microscope) and DTA (differential thermal analysis). The results show that adding trace La element into carbides is effective to minish the grain size of WC/Co powder. The La doped carbides powder with grain size of 30nm can be obtained after 10h ball milling. The XRD peak of Co phase disappeared after 20h ball milling, which indicated solid solution (or secondary solid solution) of Co phase in WC phase. The La doped powder with grain size of 10nm is obtained after 30h ball milling. A peak of heat release at the temperature of 470℃ was emerged in DTA curve within the range of heating temperature, which showed that the crystal structure relaxation of the powder appeared in the process of high energy ball milling. After consolidated the La doped WC/Co alloy by high energy ball milling exhibits ultra-fine grain sizes and better mechanical properties.

Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

This paper gives a brief report of the synthesis of a new kind of solid-solid phase change materials （SSPCMs）, nano-crystalline cellulose/polyethylene glycol （NCC/PEG）. These PCMs have very high ability for energy storage, and their enthalpies reach 103.8 J/g. They are composed of two parts, PEG as functional branches for energy storage, and NCC as skeleton. The flexible polymer PEG was grafted onto the surface of rigid powder of NCC by covalent bonds. The results of DSC, FT-IR were briefly introduced, and some comments were also given.

Stress Field of Non-equilibrium Grain Boundaries in Nano-crystalline Metals

Introducing the stress distribution near grain boundaries to improve the dislocation pileup model for the Halt-Petch (H-P) relation, the continuous distribution of dislocations in the pileup could be solved by means of Tschebysheff polynomials for the Hilbert transformation. An analytical formula of the stress intensity factor for the dislocation pileup is obtained. The reverse H-P relation may be explained by the modified dislocation-pileup-model.

Effect of Gas Sources on the Deposition of Nano-Crystalline Diamond Films Prepared by Microwave Plasma Enhanced Chemical Vapor Deposition

Nano-crystalline diamond （NCD） films were deposited on silicon substrates by a microwave plasma enhanced chemical vapor deposition （MPCVD） reactor in C2H5OH/H2 and CH4/H2/O2 systems, respectively, with a constant ratio of carbon/hydrogen/oxygen. By means of atomic force microscopy （AFM） and X-ray diffraction （XRD）, it was shown that the NCD films deposited in the C2H5OH/H2 system possesses more uniform surface than that deposited in the CH4/H2/O2 system. Results from micro-Raman spectroscopy revealed that the quality of the NCD films was different even though the plasmas in the two systems contain exactly the same proportion of elements. In order to explain this phenomenon, the bond energy of forming OH groups, energy distraction in plasma and the deposition process of NCD films were studied. The experimental results and discussion indicate that for a same ratio of carbon/hydrogen/oxygen, the C2H5OH/H2 plasma was beneficial to deposit high quality NCD films with smaller average grain size and lower surface roughness.

Reinforcement of Lignin-Based Phenol-Formaldehyde Adhesive with Nano-Crystalline Cellulose (NCC): Curing Behavior and Bonding Property of Plywood

The curing behavior of lignin-based phenol-formaldehyde (LPF) resin with different contents of nano-crystalline cellulose (NCC) was studied by differential scanning calorimetry (DSC) at different heating rates (5, 10 and 20&degC/min) and the bonding property was evaluated by the wet shear strength and wood failure of two-ply plywood panels after soaking in water (48 hours at room temperature and followed by 1-hour boiling). The test results indicated that the NCC content had little influence on the peak temperature, activation energy and the total heat of reaction of LPF resin at 5 and 10&degC/min. But at 20&degC/min, LPF0.00% (LPF resin without NCC) showed the highest total heat of reaction, while LPF0.25% (LPF resin containing 0.25% NCC content) and LPF0.50% (LPF resin containing 0.50% NCC content) gave the lowest value. The wet shear strength was affected by the NCC content to a certain extent. With regard to the results of one-way analysis of variance, the bonding quality could be improved by NCC and the optimum NCC content ranged from 0.25% to 0.50%. The wood failure was also affected by the NCC content, but the trend with respect to NCC content was not clear.

Preparation of Nano-crystalline Tungsten Carbide Thin Film by Magnetron Sputtering and Their Electrocatalytic Property for PNP Reduction

Nano-crystalline tungsten carbide thin films were deposited on Ni substrates by magnetron sputtering using WC as target material. The crystal structure and morphology of the thin films were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM） Electrochemical investigations showed that the electrode of the thin film exhibited higher electrocatalytic activity in the reaction of p-nitrophenol （PNP） reduction. FT-IR analysis indicated that p-aminophenol （PAP） was synthesized after two step reduction of PNP on nano-crystalline tungsten carbide thin film electrode.

The Character of Photo-electrochemistry of Palladium Implanted TiO_2 Nano-crystalline Electrode

A new electrode was prepared by using Pd implanted into nano-crystalline TiO2 and the character of photo-electrochemistry of implanted electrodes was investigated. The energy band structure of nano-crystalline TiO2 has not changed after implantation with Pd. The photo-current (i(ph)) of palladium implanted TiO2 nano-crystalline electrode is larger than that of pure TiO2 nanocrystalline electrode.

PREPARATION OF NANO-CRYSTALLINE Fe-Cu THIN FILMS AND THEIR MAGNETIC PROPERTIES

Fe-Cu thin films of 0.2 mum in thickness with different Cu contents wereprepared by using r.f. magnetron sputtering onto glass substrate. The effect of sputteringparameters, including Ar gas pressure and input rf power, on the structure and magnetic propertieswas investigated. It was found that when the power is lower than 70W, the structure of the filmsremained single bcc-Fe phase with Cu solubility of up to 50at. percent. TEM observations for thebcc-Fe phase showed that the grain size was in the nanometer range of less than 20nm. The coercivityof Fe- Cu films was largely affected by not only Ar gas pressure but also rf power, and reachedabout 2.5Oe in the pressure of 0.67-6.67Pa and in the power of less than 100W. In addition,saturation magnetization, with Cu content less than 60at. percent, was about proportional to thecontent of bcc-Fe. When Cu content was at 60at. percent, however, saturation magnetization was muchsmaller than its calculation value.

Size Effects of Nano-crystalline Cellulose

Natural cellulose with the crystal form of cellulose Ⅰ, when treated with condensed lye (e.g. 18%NaOH), can change into new crystal form of cellulose Ⅱ. But the nano-crystalline cellulose (NCC) can do it when only treated with dilute lye (e.g. 1%NaOH) at room temperature and even can dissolve into slightly concentrated lye (e.g. 4%NaOH).

Dynamic modeling of preloaded size-dependent nano-crystalline nano-structures

The vibration behavior of size-dependent nano-crystalline nano-beams is investigated based on nonlocal, couple stress and surface elasticity theories. A nano- crystalline nano-beam is composed of three phases which are nano-grains, nano-voids, and interface. Nano-voids or porosities inside the material have a stiffness-softening impact on the nano-beam. A Eringen＇s nonlocal elasticity theory is applied in the analysis of nano-crystalline nano-beams for the first time. Residual surface stresses which are usually neglected in modeling nano-crystalline nano-beams are incorporated into nonlocal elasticity to better understand the physics of the problem. Also, a modified couple stress theory is used to capture rigid rotations of grains. Applying a differential transform method （DTM） satisfying various boundary conditions, the governing equations obtained from the Hamilton＇s principle are solved. Reliability of the proposed approach is verified by comparing the obtained results with those provided in the literature. The effects of the nonlocal parameter, surface effect, couple stress, grain size, porosities, and interface thickness on the vibration characteristics of nano-crystalline nano-beams are explored.

Fabrication of nano-crystalline W-Ni-Fe pre-alloyed powders by mechanical alloying technique

Nano-crystalline pre-alloyed powders of W-Ni-Fe were fabricated by high energy ball milling mechanical alloying (MA) technique. The change of appearances and the crystallite sizes of powders before and after high energy ball milling were investigated by XRD, TOPAS P software, SEM and EDS. The results show that the nano-crystalline pre-alloyed powders can be fabricated by 5 h high energy ball milling. During the MA process, the diffusion of W, Ni and Fe happens in the process of repeated welding and fracturing. As a result, nano-crystalline supersaturated solid solutions are formed. The crystallite sizes won't be refined after 10 h ball milling. The crystallite sizes of different compositions are almost the same under the same MA condition. Due to the toughening mechanism of rare earth element, the powders of 90W-4Ni-2Fe-3.8Mo-0.2RE alloy are seriously agglomerated after ball milling compared with the other alloys. It can be concluded that the optimal sintering temperature of 90W-4Ni-2Fe-3.8Mo-0.2RE pre-alloyed powders after 15 h mechanical alloying is 1 300-1 350 ℃.

Preparation of Nano-Crystalline Diamond Films on Poly-Crystalline Diamond Thick Films by Microwave Plasma Enhanced Chemical Vapor Deposition

Nano-crystalline diamond （NCD） films were prepared on poly-crystalline diamond （PCD） thick flims by the microwave plasma enhanced chemical vapor deposition （MPCVD） method. Free standing PCD thick film （50 mm in diameter） with a thickness of 413 μm was deposited in CHn/H2 plasma. It was then abraded for 2 hours and finally cut into pieces in a size of 10×10 mm^2 by pulse laser. NCD fihns were deposited on the thick film substrates by introducing a micro-crystalline diamond （MCD） interlayer. Results showed that a higher carbon concentration （5%） and a lower substrate temperature （650℃） were feasible to obtain a highly smooth interlayer, and the appropriate addition of oxygen （2%） into the gas mixture was conducive to obtaining a smooth nano-crystalline diamond film with a tiny grain size.

Brightness of Blue/Violet Luminescent Nano-Crystalline AZO and IZO Thin Films with Effect of Layer Number:For High Optical Performance

From different reports, it （AZO） and indium-doped including usage areas. We nanocrystalline films with is realized that there is a need to consider all sides of aluminum-doped zinc oxide zinc oxide （IZO） thin films with their optical, luminescence and surface properties establish an assessment to carry out further information to summarize AZO and IZO impact of the layer number.

Hexagonal Nano-Crystalline BCN Films Grown on Si (100) Substrate Studied by X-Ray Absorption Spectroscopy

Hexagonal nano-crystalline boron carbonitride (h-BCN) films grown on Si (100) substrate have been precisely investigated. The films were synthesized by radio frequency plasma enhanced chemical vapor deposition using tris-dimethylamino borane as a single-source molecular precursor. The deposition was performed by setting RF power at 400 - 800 W. The reaction pressure was at 2.6 Pa and the substrate temperature was recorded at 700°C - 800°C. Formation of the nano-crystalline h-BCN compound has been confirmed by X-ray diffraction analysis. The diffraction peaks at 26.3° together with a small unknown peak at 29.2° were elucidated due to the formation of an h-BCN structure. The films composed of B, C, and N atoms with different B-N, B-C, C-N chemical bonds in forming the sp2-BCN atomic configuration studied by X-ray photoelectron spectroscopy. Orientation and local structures of the h-BCN hybrid were studied by near-edge X-ray absorption fine structure (NEXAFS) measurements. The dominant presence of p* and s* resonance peaks of the sp2-hybrid orbitals in the B K-edge NEXAFS spectra revealed the formation of the sp2-BCN configuration around B atoms like-BN3 in h-BN. The orientation was suggested on the basis of the polarization dependence of B K-edge and N K-edge of the NEXAFS spectra.

CZTSe/Cd_(1-x)Zn_xS界面能带结构研究

严重的开路电压损耗是限制铜锌锡硫(硒)薄膜太阳电池性能提升的关键问题,其吸收层和缓冲层界面的能带结构有待进一步优化。针对此问题,本文对CZTSe/Cd_(1-x)Zn_xS界面的能带结构进行了研究。首先,模拟计算了化学水浴法制备Cd_(1-x)Zn_xS薄膜所需的溶液体系条件,通过椭偏仪和SEM测试结果分析了不同Cd/Zn比例的Cd_(1-x)Zn_xS缓冲层形貌、光学特性以及禁带宽度。然后,对CZTSe/Cd_(1-x)Zn_xS界面进行了XPS测试分析,发现CZTSe/Cd_(0.9)Zn_(0.1)S界面最为匹配,其导带失调值约为0.3 eV。最后对电池器件进行了制备与测试,得到的CZTSe/Cd_(0.9)Zn_(0.1)S结构的太阳电池比CZTSe/CdS结构具有更高的开路电压,达到了394 mV,转换效率达到了5.78%。

电沉积Cu/Zn金属预制层后续低硒压硒化制备CZTSe薄膜

在玻璃/Mo衬底上采用恒电流顺序电沉积Cu-Zn金属预制层,后续在SnSe_x(x=1,2)气氛较低硒压条件下硒化制备CZTSe薄膜。SnSe_x(x=1,2)分压由Sn源温度控制,Se分压由Se源温度控制,Se源及样品温度分别为270℃和570℃。采用3种不同的硒化处理工艺对金属预制层进行硒化处理。通过SEM及EDS表征CZTSe薄膜的结构、形貌及成分。综合SEM及EDS测试结果,确定CZTSe和Mo界面处MoSe_2相很薄。实验发现较低SnSe_x(x=1,2)气氛条件下可实现高温低Se压硒化CuZn预制层制备单相CZTSe薄膜,经工艺优化得到效率为7.6%的CZTSe太阳电池。

氨水浓度对化学水浴法制备CdS缓冲层及CZTSe电池性能的影响

主要研究了化学水浴法沉积CdS薄膜中氨水浓度对薄膜材料特性的影响。通过X射线衍射(XRD)、扫描电子显微镜(SEM)和分光光度计(UV-Vis)等测试手段对制备的CdS薄膜的结构和光学特性进行了分析。结果表明:不同的氨水浓度条件下均得到立方相CdS薄膜,薄膜沿(111)面择优取向生长。随着氨水浓度增加时CdS薄膜表面逐渐变得致密光滑,CdS薄膜的透过率增强和带隙变宽。在氨水浓度为0.10 mol/L时制备出材料特性最佳的CdS薄膜,其表面紧凑致密无针孔,颗粒大小均匀,将其应用于CZTSe薄膜太阳电池中的缓冲层材料,得到光电转化效率为3.12%的CZTSe薄膜太阳电池(该电池未经任何后硒化处理工艺)。

Formation of the front-gradient bandgap in the Ag doped CZTSe thin films and solar cells

The graded bandgap of kesterite based absorber layer is an important way to achieve high efficiency solar cells. Incorporation of Ag into CZTSSe thin films can adjust the bandgap and thus reduce the VOC-deficit and improve the quality of crystallization. However, the distribution of Ag is difficult to control due to the quick diffusion of Ag under the high temperature. In this study, we achieve the front Ag-gradient in kesterite structured compound films by prealloying followed by selenization process at 550 °C. AgZn3,Ag3Sn, and Sn–Ag–Cu alloy phases were formed during prealloying stage at 250 °C. After prealloying process, Ag tends to distribute at the front surface of the ACZTSe thin films. Combining the results of experiment and SCAPS simulation, the significantly VOCimprovement of devices is ascribed to the formation of the front Ag-gradient bandgap structure in the absorber layer. This facile prealloying selenization process affords a feasible method to design the graded bandgap structure absorber layers, which will promote the fabrication of high efficient graded bandgap structure solar cells.

基于相图的CZTSe光伏材料的形成路径设计和实验探索

文章基于CZTSe光伏材料的相图,从理论上研究了(1)基于富Zn相的生长路线;(2)基于Cu2SnSe3-ZnSe的两者反应生长路线;(3)基于富Cu相的生长路线。同时,文章研究了不同的合成路径CZTSe生长过程中杂相的形成可能,分析了缺陷的形成能,在此基础上得出了CZTSe体系易控制易生长的实验基础理论。并使用自主研发的"四室八源共蒸发系统"成功地监测到样品温度变化与样品处在不同相空间的关系,并观测到相变过程中相限跨越的温度变化,为以后制作高效率的CZTSe太阳电池提供了理论依据和实验指导。

Improvement of the Open Circuit Voltage of CZTSe Thin-Film Solar Cells by Surface Sulfurization Using SnS

The objective of this study is to find an effective method to improve Voc without Jsc loss for Cu2ZnSnSe4 （CZTSe） thin film solar cells, which have been fabricated by the one step co-evaporation technique. Surface sulfurization of CZTSe thin films is carried out by using one technique that does not utilize toxic H2S gas; a sequential evaporation of SnS after CZTSe deposition and the annealing of CZTSe thin films in selenium vapor. A Cu2ZnSn（S, Se）4 （CZTSSe） thin layer is grown on the surface of the CZTSe thin film after the annealing. The conversion efficiency of the completed device is improved due to the enhancement of Voc, which could be attributed to the formation of a hole-recombination barrier at the surface or the passivation of the surface and grain boundary by S incorporation.