Based on probability and statistic, a design method of precision cam profileconcerning the influence of random processing errors is advanced. Combining the design with theprocess, which can be used to predict that cam...Based on probability and statistic, a design method of precision cam profileconcerning the influence of random processing errors is advanced. Combining the design with theprocess, which can be used to predict that cam profiles will be successfully processed or not in thedesign stage, design of the cam can be done by balancing the economization and reliability. Inaddition, an fuzzy deduction method based on Bayers formula is advanced to estimate processingreasonable of the designed precision cam profile, and it take few samples.展开更多
We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pres...We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pressure angle of the globoidal indexing cam mechanism in detail and put forward a new concept of equivalent pressure angle.展开更多
Based on the analysis of typical hybrid-type content addressable memory (CAM) structures, a hybrid-type CAM architecture with lower power consumption and higher stability was proposed. This design changes the connec...Based on the analysis of typical hybrid-type content addressable memory (CAM) structures, a hybrid-type CAM architecture with lower power consumption and higher stability was proposed. This design changes the connection of a N-type metal-oxide-semiconductor (NMOS) transistor in the control circuit, which greatly reduces the power consumption during comparison by making the match line simply discharge to the NMOS threshold voltage. A comparative study was made between conventional and the proposed hybrid-type CAM architecture by semiconductor manufacturing international corporation (SMIC) 65 nm complementary metal-oxide-semiconductor (CMOS) technology. Simulation shows that the power consumption of the proposed structure is reduced by 23%. Furthermore, the proposed design also adjusts the match line (ML) discharge path. In case that, the not and type (NAND-type) block is matched and the not or type (NOR-type) block is mismatched, the jitter voltage on the match line can be decreased largely.展开更多
Micro-and nano-structuring have been highlighted over several decades in both science and engineering fields.In addition to continuous efforts in fabrication techniques,investigations in scalable nanomanufacturing hav...Micro-and nano-structuring have been highlighted over several decades in both science and engineering fields.In addition to continuous efforts in fabrication techniques,investigations in scalable nanomanufacturing have been pursued to achieve reduced feature size,fewer constraints in terms of materials and dimensional complexity,as well as improved process throughput.In this study,based on recent micro-/nanoscale fabrication processes,characteristics and key requirements for computer-aided design and manufacturing(CAD/CAM)systems for scalable nanomanufacturing were investigated.Requirements include a process knowledge database,standardized processing,active communication,adaptive interpolation,a consistent coordinate system,and management of peripheral devices.For scalable nanomanufacturing,it is important to consider the flexibility and expandability of each process,because hybrid and bridging processes represent effective ways to expand process capabilities.As an example,we describe a novel CAD/CAM system for hybrid three-dimensional(3D)printing at the nanoscale.This novel hybrid process was developed by bridging aerodynamically focused nanoparticle printing,focused ion beam milling,micromachining,and spincoating processes.The system developed can print a full 3D structure using various inorganic materials,with a minimum process scale of 50 nm.The most obvious difference versus CAD/CAM at‘conventional’scales is that our system was developed based on a network to promote communication between users and process operators.With the network-based system,it is also possible to narrow the gap among different processes/resources.We anticipate that this approach can contribute to the development of CAD/CAM for scalable nanomanufacturing and a wide range of hybrid processes.展开更多
In this paper, a vibration motion control is proposed and implemented on a foamed polystyrene machining robot to suppress the generation of undesirable cusp marks, and the basic performance of the controller is verifi...In this paper, a vibration motion control is proposed and implemented on a foamed polystyrene machining robot to suppress the generation of undesirable cusp marks, and the basic performance of the controller is verified through machining experiments of foamed polystyrene. Then, a 3 dimensional (3D) printer-like data interface is proposed for the machining robot. The 3D data inter- face enables to control the machining robot directly using stereolithography (STL) data without conducting any computer-aided man- ufacturing (CAM) process. This is done by developing a robotic preprocessor that helps to remove the need for the conventional CAM process by directly converting the STL data into cutter location source data called cutter location (CL) or cutter location source (CLS) data. The STL is a file format proposed by 3D systems, and recently is supported by many computer aided design (CAD)/CAM soft- waxes. The STL is widely used for rapid prototyping with a 3D printer which is a typical additive manufacturing system. The STL deals with a triangular representation of a curved surface geometry. The developed 3D printer-like data interface allows to directly control the machining robot through a zigzag path, rectangular spiral path and circular spiral path generated according to the information included in STL data. The effectiveness and usefulness of the developed system are demonstrated through actual machining experiments.展开更多
Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of g...Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.展开更多
基金This project is supported by Significant Project Foundation of National 863 Program, China.
文摘Based on probability and statistic, a design method of precision cam profileconcerning the influence of random processing errors is advanced. Combining the design with theprocess, which can be used to predict that cam profiles will be successfully processed or not in thedesign stage, design of the cam can be done by balancing the economization and reliability. Inaddition, an fuzzy deduction method based on Bayers formula is advanced to estimate processingreasonable of the designed precision cam profile, and it take few samples.
文摘We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pressure angle of the globoidal indexing cam mechanism in detail and put forward a new concept of equivalent pressure angle.
基金supported by the Natural Science Fund for Colleges and Universities in Anhui Province (KJ2013A006)
文摘Based on the analysis of typical hybrid-type content addressable memory (CAM) structures, a hybrid-type CAM architecture with lower power consumption and higher stability was proposed. This design changes the connection of a N-type metal-oxide-semiconductor (NMOS) transistor in the control circuit, which greatly reduces the power consumption during comparison by making the match line simply discharge to the NMOS threshold voltage. A comparative study was made between conventional and the proposed hybrid-type CAM architecture by semiconductor manufacturing international corporation (SMIC) 65 nm complementary metal-oxide-semiconductor (CMOS) technology. Simulation shows that the power consumption of the proposed structure is reduced by 23%. Furthermore, the proposed design also adjusts the match line (ML) discharge path. In case that, the not and type (NAND-type) block is matched and the not or type (NOR-type) block is mismatched, the jitter voltage on the match line can be decreased largely.
基金This work was supported by the Brain Korea 21 Plus project at Seoul National University,the National Research Foundation of Korea(NRF)grants funded by the Ministry of Education,Science and Technology(Nos.NRF-2015R1A2A1A13027910,NRF-2016R1A6A3A03012011).
文摘Micro-and nano-structuring have been highlighted over several decades in both science and engineering fields.In addition to continuous efforts in fabrication techniques,investigations in scalable nanomanufacturing have been pursued to achieve reduced feature size,fewer constraints in terms of materials and dimensional complexity,as well as improved process throughput.In this study,based on recent micro-/nanoscale fabrication processes,characteristics and key requirements for computer-aided design and manufacturing(CAD/CAM)systems for scalable nanomanufacturing were investigated.Requirements include a process knowledge database,standardized processing,active communication,adaptive interpolation,a consistent coordinate system,and management of peripheral devices.For scalable nanomanufacturing,it is important to consider the flexibility and expandability of each process,because hybrid and bridging processes represent effective ways to expand process capabilities.As an example,we describe a novel CAD/CAM system for hybrid three-dimensional(3D)printing at the nanoscale.This novel hybrid process was developed by bridging aerodynamically focused nanoparticle printing,focused ion beam milling,micromachining,and spincoating processes.The system developed can print a full 3D structure using various inorganic materials,with a minimum process scale of 50 nm.The most obvious difference versus CAD/CAM at‘conventional’scales is that our system was developed based on a network to promote communication between users and process operators.With the network-based system,it is also possible to narrow the gap among different processes/resources.We anticipate that this approach can contribute to the development of CAD/CAM for scalable nanomanufacturing and a wide range of hybrid processes.
基金supported by the Japam Society for the Promotion of Science(JSPS)KAKENHI(Nos.25420232 and 16K06203)
文摘In this paper, a vibration motion control is proposed and implemented on a foamed polystyrene machining robot to suppress the generation of undesirable cusp marks, and the basic performance of the controller is verified through machining experiments of foamed polystyrene. Then, a 3 dimensional (3D) printer-like data interface is proposed for the machining robot. The 3D data inter- face enables to control the machining robot directly using stereolithography (STL) data without conducting any computer-aided man- ufacturing (CAM) process. This is done by developing a robotic preprocessor that helps to remove the need for the conventional CAM process by directly converting the STL data into cutter location source data called cutter location (CL) or cutter location source (CLS) data. The STL is a file format proposed by 3D systems, and recently is supported by many computer aided design (CAD)/CAM soft- waxes. The STL is widely used for rapid prototyping with a 3D printer which is a typical additive manufacturing system. The STL deals with a triangular representation of a curved surface geometry. The developed 3D printer-like data interface allows to directly control the machining robot through a zigzag path, rectangular spiral path and circular spiral path generated according to the information included in STL data. The effectiveness and usefulness of the developed system are demonstrated through actual machining experiments.
基金Department of Science and Technology,Government of India for providing financial support under the scheme FIST(No.SR/FST/ETI-388/2015)。
文摘Fixture design and planning is one of the most important manufacturing activities, playing a pivotal role in deciding the lead time for product development. Fixture design, which affects the part-quality in terms of geometric accuracy and surface finish, can be enhanced by using the product manufacturing information(PMI) stored in the neutral standard for the exchange of product model data(STEP) file, thereby integrating design and manufacturing. The present paper proposes a unique fixture design approach, to extract the geometry information from STEP application protocol(AP) 242 files of computer aided design(CAD) models, for providing automatic suggestions of locator positions and clamping surfaces. Automatic feature extraction software "FiXplan", developed using the programming language C#, is used to extract the part feature, dimension and geometry information. The information from the STEP AP 242 file is deduced using geometric reasoning techniques, which in turn is utilized for fixture planning. The developed software is observed to be adept in identifying the primary, secondary, and tertiary locating faces and locator position configurations of prismatic components. Structural analysis of the prismatic part under different locator positions was performed using commercial finite element method software, ABAQUS, and the optimized locator position was identified on the basis of minimum deformation of the workpiece.The area-ratio(base locator enclosed area(%)/work piece base area(%)) for the ideal locator configuration was observed as 33%. Experiments were conducted on a prismatic workpiece using a specially designed fixture, for different locator configurations. The surface roughness and waviness of the machined surfaces were analysed using an Alicona non-contact optical profilometer. The best surface characteristics were obtained for the surface machined under the ideal locator positions having an area-ratio of 33%, thus validating the predicted numerical results. The efficiency, capability and applicability of the developed software is demonstrated for the finishing operation of a sensor cover – a typical prismatic component having applications in the naval industry, under different locator configurations.The best results were obtained under the proposed ideal locator configuration of area-ratio 33%.