Centrifugal and field studies on water infiltration characteristics below canals under wetting-drying-freezing-thawing cycles

Seepage is one of the main causes for the deformation and instability of canal slopes in Xinjiang,China.In this study,centrifugal model tests under wetting-drying(WD)and wetting-drying-freezing-thawing(WDFT)cycles were performed to investigate the water infiltration characteristics below a canal.The results show that the shallow soil of the canal models was fully saturated in the wetting process.Compared with the canal model under the WD cycles,the canal model under the WDFT cycles had larger saturated areas and a higher degree of saturation below the canal top after each cycle,indicating that the freezing-thawing(FT)process in the WDFT cycles promoted the water infiltration behavior below the canal slope.The cracks on the surface of the canal model under the cyclic action of WDFT developed further and had a higher connectivity,which provided the conditions for slope instability from a transverse tensile crack running through the canal top.On this basis,a field test was conducted to understand the water infiltration distribution below a typical canal in Xinjiang,China,which also verified the accuracy of the centrifugal results.This study provides a preliminary basis for the maintenance and seepage treatment of canals in Xinjiang,China.

Calcium Hydroxide Removal in Curved Root Canals with Apical Transportation In Vitro

Calcium hydroxide（CH） is applied to improve disinfection of root canals in most root canal retreatment. This study aimed to analyze the CH removal efficacy using 7 different root preparing files（K file, pre-curved K file, EndoActivator, Ultrasonic file, pre-curved ultrasonic file, F file and needle irrigation alone） with apical transportation. Standardized models of curved canal with such apical transportation or not were set up before applying CH to root canal for 7 days. Seven techniques described above were used for its removal. Then the roots were disassembled and digital photos were taken. The ratio of residual CH in the overall canal surface was calculated using the image analyzer image pro plus 6.0. The data were analyzed using one-way ANOVA with post hoc Tukey test. Results revealed that CH was effectively removed（P〈0.05） by using all 6 mechanical methods except irrigation alone. In curved root canals with apical transportation, EndoActivator, pre-curved ultrasonic file and F file were found to be more effective in removing CH than the other four file（P〈0.001）, while there was no significant difference among EndoActivator, pre-curved ultrasonic file and F file groups（P〉0.05）. The percentage of residual CH in the canal with apical transportation was higher than that in the canal without apical transportation（P〈0.05）. In conclusion, CH can be hardly removed completely. Canal with apical transportation will result in insufficient CH removal. EndoActivator, pre-curved ultrasonic file and F file are more effective in the curved root canal with apical transportation.

Non-surgical management of dens invaginatus type IIIB in maxillary lateral incisor with three root canals and 6-year follow-up:A case report and review of literature

BACKGROUND The presence of dens invaginatus(DI)complicates treatment of any tooth,from diagnosis to access cavity and biomechanical preparation and obturation.Reports of successful non-surgical management of DI type IIIB in maxillary lateral incisor are rare.Here,we report such a case,with three root canals and a long follow-up.CASE SUMMARY A 13-year-old female patient presented with mild pain in the maxillary right lateral incisor(#7)for 10-15 d.On examination,the tooth was slightly rotated,with slight tenderness on percussion and grade I mobility but with no caries,pockets or restorations and non-vital pulp(via vitality tests).Radiographic examination revealed unusual configuration of the tooth’s root canals,with an enamel-lined invagination extending to the apex,suggesting the possibility of DI Oehler’s type IIIB and a periapical radiolucency.Widening the access cavity lingually revealed one distinct buccal orifice and two distinct palatal orifices;under higher magnification of a dental operating microscope(DOM),the mesio palatal and disto-palatal orifices were observed as connected by a C-shaped groove.The root canals were prepared with hand K-files following a step-back technique,and obturated using a combination technique of lateral condensation and vertical compaction.At the 6-year follow-up,the patient was asymptomatic,and the periapical radiography displayed significant healing around the apical end of the root.CONCLUSION Proper knowledge of unusual root canal anatomy is required in treating DI.Conventional methods of root canal treatment can successfully resolve such complex cases,facilitated by DOM and cone-beam computed tomography.

Ecological Design of Flood Discharging Canals in Shijiazhuang City

From the perspective of ecological conservation and satisfaction of people's visual and psychological demands,existing problems in the urban revetment were analyzed,and the connotation of ecological revetment as well as the selection of different ecological revetments according to different types of river ways was discussed.

The Role of Traditional Irrigation Canals in a Long Term Environmental Perspective A Case Study in Southern France： The Durance Basin

The agricultural sector is often considered to be the largest water consumer and the policy aimed at saving irrigation water exists across Europe. The flip-side of such policy, however, is the disappearance of traditional irrigation canals since farmers are encouraged to turn to drip irrigation and overhead irrigation gradually. Given this, we would like to argue that traditional irrigation canals need to be reexamined. Such canals are not only built aquatic infrastructure, they are also the product of a culture and social relationship with water in the Mediterranean region. Canals form a complex system which is driven by environmental, economic and social factors. Our sociological and environmental research in Provence （and around the Durance basin more specifically） points up how the very dense territorial network of gravity-fed canals is useful in water management, as well as in other shared uses over the long-term. The findings underscore the positive environmental role played by these historical and anthropogenic constructions. They contribute to refilling the aquifer and also act as a valuable environmental good and service （e.g., run-off regulation, biodiversity, landscape, recreation, etc.）. Further, several local actors have underscored their role as part of an intangible cultural heritage and as important for the area＇s economic and social development. Such canals play a central role in sustainable development since beyond their productive role in agriculture, they play a social role （new uses） and an ecological role （as reservoirs for biodiversity and ecological corridors）.

Calculations of Radiations Attenuation and Dose Assessments of Tunnels Passing under Water Canals

Most of the developed countries have used their tunnels as protective structures （public nuclear shelters） in case of nuclear emergencies to protect their citizens from the dangerous effects of nuclear weapons. The research aims to explain how to use tunnels to protect some people from neutrons and gamma rays and account the required safe depth. The computer code （MCNP5） is used at this model for such tunnel to account attenuation of both neutrons and gamma rays passing through the canal water, sand, soil and reinforced concrete wall layers. The last one （thickness 105 cm） constructed the tunnel construction. Also, the computer code is used to account the dose inside the tunnel, and account （neutron） dose, （neutron, gamma） dose, prompt （gamma） dose, total （gamma） dose and total （neutron ＋ gamma） dose estimated by μsv/h, at different depths from the water surface level （depths 200 cm, 500 cm, 1,000 cm, 1,600 cm, 2,200 cm, 2,600 cm, 2,800 cm, 3,400 cm, 3,700 cm, 4,000 cm and 4,600 cm）. Then, account these doses for three bombs （its intensity 20 KT, 100 KT and 1,000 KT）.

Effect of restoration technique on resistance to fracture of endodontically treated anterior teeth with flared root canals

This study was designed to compare the impact of post and core systems on resistance to fracture of endodontically treated anterior teeth with flared root canals and to assess their fracture pattern. Sixty central incisors were cut horizontally 2 mm coronal to the cementoenamel junction(CEJ). After root canal therapy, teeth were assigned into 6 groups(n = 10 each) based on a post system and used as follows: Group C, non-flared root received size #1 glass fiber posts(Control); Group AP, flared root restored with anatomical post; Group RC, flared root restored with size #1 fiber post and cemented with thick layer of resin cement; Group CR, flared root restored with size #1 and reinforced with composite resin; Group CM, cast post-core; Group CP, CAD/CAM polymer-infiltrated ceramic post and core.Following post cementation, core build-up and crown insertion, the specimens were thermo-cycled up to 10,000 cycles(5 C/55 C; 30 seconds dwell time, 6 seconds transition time) and then statically loaded at 1 mm/minute crosshead speed using a universal testing machine. One-way ANOVA and Tukey HSD post hoc test(α= 0.05) were used for data analysis. Group C recorded significantly higher resistance to fracture values [(826.9±39.1) N] followed by group CP [(793.8±55.6) N] while group RC yielded the lowest fracture resistance values [(586.7±51.4) N]. The resistance to fracture of wide root canals can be enhanced by using one-piece CAM/CAM post and core as an alternative to the use of either glass fiber post, relined with composite resin increasing the thickness of luting cement or the use of cast post and core system. However, this was an in vitro investigation and further in vivo studies are necessary.

Three-dimensional inlay-guided endodontics applied in variant root canals: A case report and review of literature

BACKGROUND Root canal retreatment is common after root canal therapy in clinical situations.Especially,completing the retreatment of variant root canals can be challenging.This is particularly true for the molars located at the end of the dental arch.However,advancements in digital dental diagnosis and treatment techniques can solve these problems.Here,we describe a case of a maxillary second molar with a variant distobuccal root canal treated via a novel“inlay-guided endodontics”technique based on improved computer-generated programs.CASE SUMMARY A 63-year-old man complained of a defect in the maxillary left second molar.The tooth,diagnosed with post-treatment endodontic disease,was initially treated by conventional methods,which were ineffective.Our“inlay-guided endodontics”technique was subsequently adopted,with the establishment of a precise integrated three-dimensional(3D)plate model of cone-beam computed tomography data and a digital impression of the dentition.An optimal root canal approach was generated for the“virtual file”in the 3D model.The plate data were imported into a 3D printer and printed.With the help of the guide plate,the file was accurately placed into the cervical third of the distal root canal.The root canal and prosthodontic treatments successfully proceeded subsequently.CONCLUSION Our newly developed inlay guide plates may facilitate individualized and minimally invasive root canal treatment.

Endodontic management of the maxillary first molars with two root canals: A case report and review of the literature

BACKGROUND The complex anatomy of the maxillary first molars has always been a major challenge for complete root canal treatment in endodontic therapy. Here, we present two cases of maxillary first molars, each with only two root canals, which have been rarely reported. We also perform a literature review of maxillary first molar anatomy.CASE SUMMARY The two patients were referred to the hospital after 1) finding a cavity in their tooth with a color change and, 2) a toothache during mastication, respectively.Both of these cases were diagnosed as apical periodontitis by X-ray imaging and cone beam computed tomography(CBCT). Non-surgical endodontic therapy was performed with the assistance of a dental operating microscope(DOM). CBCT showed rare but accurate images of both patients, each with two root canals and two roots in their maxillary first molars. Both roots were located in the buccal in the palatal direction, and each root had only one clear root canal. In addition,each maxillary first molar in both patients was symmetrical to that on the opposing side with only two separate root canals. Non-surgical endodontic therapy was performed with the assistance of a DOM. Finally, the teeth were restored using composite resin and the patients were satisfied with the results.CONCLUSION Making full use of CBCT and DOM would contribute to helping dentists make correct diagnoses and successfully treat teeth with rare root canal morphologies.

Cone-beam computed tomography analysis of curved root canals after mechanical preparation with three nickel-titanium rotary instruments

Cone beam computed tomography is a 3-dimensional high resolution imaging method. The purpose of this study was to compare the effects of 3 different NiTi rotary instruments used to prepare curved root canals on the final shape of the curved canals and total amount of root canal transportation by using cone-beam computed tomography. A total of 81 mesial root canals from 42 extracted human mandibular molars, with a curvature ranging from 15 to 45 degrees, were selected. Canals were randomly divided into 3 groups of 27 each. After preparation with Protaper, Revo-S and Hero Shaper, the amount of transportation and centering ability that occurred were assessed by using cone beam computed tomography. Utilizing preand post-instrumentation radiographs, straightening of the canal curvatures was determined with a computer image analysis program. Canals were metrically assessed for changes （surface area, changes in curvature and transportation） during canal preparation by using software SimPlant; instrument failures were also recorded. Mean total widths and outer and inner width measurements were determined on each central canal path and differences were statistically analyzed. The results showed that all instruments maintained the original canal curvature well with no significant differences between the different files （P=0.226）. During preparation there was failure of only one file （the protaper group）. In conclusion, under the conditions of this study, all instruments maintained the original canal curvature well and were safe to use. Areas of uninstrumented root canal wall were left in all regions using the various systems.

Fracture resistance and pattern of the upper premolars with obturated canals and restored endodontic occlusal access cavities

We studied whether obturing canals and restoring endodontic occlusal access cavities on upper premolars could provide acceptable resistance and pattern to fracture.Eighteen upper premolars were divided equally into 3 groups.Group 1 consisted of intact controls;group 2 had access cavities and root canal preparations;group 3 as in group 2 but obturated with gutta-percha and AH26,and the access cavity restored with glass ionomer and composite.Specimens were submitted to compressive strength testing using the Hounsfield Universal H50KM testing machine with a load cell of 2000 Newtons and a crosshead speed set at 1.0 mm/min until fracture.The results from the compressive strength tests showed that intact controls （1105.83±90.93 MPa） and restored premolars （936.67±44.67 MPa） were significantly different from premolars with unrestored access cavities 568.33±105.49 MPa.There was no significant difference between intact controls and restored premolars.The predominant fracture pattern for intact teeth was an oblique fracture.For premolars that had endodontic access cavities,restored or unrestored,the most common fracture pattern was a vertical fracture.The restoration of occlusal access cavities with glass ionomer and composite provided fracture resistance close to that of intact controls,but when restored teeth fractured,they were predominantly non-restorable.

Successful individualized endodontic treatment of severely curved root canals in a mandibular second molar:A case report

BACKGROUND The incidence rate of severely curved root canals in mandibular molars is low,and the root canal treatment of mandibular molars with this aberrant canal anatomy may be technically challenging.CASE SUMMARY A 26-year-old Chinese female patient presented with intermittent and occlusal pain in the left mandibular second molar.The patient had undergone filling restoration for caries before endodontic consultation.With the aid of cone beam computed tomography(CBCT),a large periapical radiolucency was observed,and curved root canals in a mandibular second molar were confirmed,depicting a severe and curved distolingual root.Nonsurgical treatments,including novel individualized preparation skills and techniques and the use of bioceramic materials as an apical barrier,were performed,and complete healing of the periapical lesion and a satisfactory effect were achieved.CONCLUSION A case of severely curved root canals in a mandibular second molar was successfully treated and are reported herein.The complex anatomy of the tooth and the postoperative effect were also evaluated via the three-dimensional reconstruction of CBCT images,which accurately identified the aberrant canal morphology.New devices and biomaterial applications combined with novel synthesis techniques can increase the success rate of intractable endodontic treatment.

A Root Canal Therapy on the Maxillary First Molar Tooth with Five Canals: A Case Report

Maxillary first molar usually exhibits a radicular anatomy of three roots and three or four canals. However, different anatomic variations like extra number of roots and canals are possible. For a successful treatment, clinicians must have well equipment and a thorough knowledge of the external and internal anatomy of teeth and its variation. Using of CBCT may help to locate extra canals by giving a chance to clinicians to see the root canal anatomy in 3-D view. The aim of this study was to present a case report about a diagnosis and treatment in maxillary first molar with three roots and five canals. It is concluded that the diagnosing and the treatment of unusual cases are key factors for successful endodontic treatment of these teeth.

The Effect of Ultrasonic Method for Preparing Root Canals:A Scanning Electron Microscopic Evaluation

Sixteen fresh extracted human teeth paired according to their anatomic locations,were divided into two groups at random.The root canais of the teeth in Group 1 were preparedwith an ultrasonic unit and those of Group 2 with hand instruments.Then,the specimens wereobserved under a scanning electron microscope and their pnotographs were taken.Blindevaluation of cleanness was performed for each canal.Statistical dnalysis of the data indicatesthat the canal walls were cleaner in Group 1 than in Group 2 and that the ultrasonic preparationtook less time.

Clinical Treatment and Anatomy Study of Maxillary First Molars with Five Root Canals

THE purpose of root canal treatment is to thoroughly clean the root canal system and fill it in all its dimensions.I To achieve this goal, the entire root canal system must be adequately debrided and completely filled. In clinical practice, variations in the canal morphology pose a constant challenge to endodontists in deciding on accurate diagnosis and appropriate management. Knowledge of these variations is crucial for a successful endodontic treatment, especially in absence of an operating microscope or cone-beam computered tomography （CBCT）.

Differentiations of 5-HT and GAS cells in the digestive canals of Rana chensinensis tadpoles

In the current study, 5-nydroxytryptamine （5-HT） and gastrin （GAS） cells in the digestive canals of Rana chensinensis tadpoles at different developmental stages were investigated by immunohistochemistry. Results showed that the 5-HT cells were only detected in the duodenum before metamorphosis began, and were extensively distributed in the stomach, duodenum, small intestine, and rectum thereafter, with the highest counts found in the duodenum and rectum when metamorphosis was completed. The GAS cells were only distributed in the stomach and duodenum, and only rarely detected in the duodenum before metamorphosis began, but increased in the stomach during metamorphosis and showed zonal distribution in the gastric mucosa when metamorphosis was completed. Metamorphosis is a critical period for amphibians, during which structural and functional physiological adaptations are required to transition from aquatic to terrestrial environments. During metamorphosis, the differentiations of 5-HT cells in the gastrointestinal canals of tadpoles could facilitate mucus secretion regulation, improve digestive canal lubrication, and help water- shortage food digestion in terrestrial environments. Conversely, GAS cell differentiations during metamorphosis might contribute to the digestive and absorptive function transition from herbivore to omnivore.

Endodontic management of the maxillary first molar with special root canals:A case report and review of the literature

BACKGROUND As the complex anatomy of maxillary first molars is one of the major challenges in endodontic therapy,knowledge of the complicated root canal anatomy and configuration is crucial to ensure the success of endodontic treatment and prognosis.This article presents an endodontically managed left maxillary first molar with an unusual palatal root morphology.The available literature on the anatomic variation of maxillary first molars is also reviewed.CASE SUMMARY A 36-year-old man with no medical history presented to the Stomatology Department of Peking University Third Hospital complaining of a toothache during mastication in the maxillary left posterior region for approximately 3 mo.He had a spontaneous and intermittent toothache that had worsened,particularly at night.The diagnosis based on clinical examination,X-ray imaging,and cone beam computed tomography(CBCT)was symptomatic irreversible pulpitis.Nonsurgical endodontic therapy was performed for the left maxillary first molar.Five root canals revealed by CBCT included a special palatal root canal(1-2-1-shaped),two mesiobuccal root canals,and one distobuccal root canal.Evaluation of the CBCT images confirmed the root canal morphology and the clinician performed more effective cleaning,obturation,and therapy.Finally,the tooth was restored using composite resin,and the patient was satisfied with the result.CONCLUSION CBCT and a complete review of the literature may be beneficial for investigating the root canal system to achieve a biological and functional therapeutic effect.

Shaping ability of thermomechanically treated files in simulated S-shaped root canals

Aim: the aim of this study was to investigate the shaping ability of thermomechanically treated files manufactured by twisting(Twisted files)and compare it to conventional rotary system (K3, Sybron Endo, Orange, CA) in S-shaped canals, including formation of ledges, zipping, elbow, outer widening, danger zone, perforation and file deformation. Materials & Methods: Forty S-Shaped canals in resin blocks were randomly divided into 2 groups of 20 each. Pre-instrumentation images of the canals were taken via a digital camera and superimposed on images taken after preparation with TF and K3 systems to apical size of 25/06 and 30/06. Canal aberrations were measured from the superimposed image at five levels using AutoCAD system. Fisher exact test and Mann Whitney test were used for analysis of the data. Results: the incidence of zipping, elbow and apical transportation was significantly lower in the TF group (P = 0.04). Generally the incidence of aberration increased when the apical size increased to 30/0.06 regardless of the file system. Significant file deformation was evident in the TF after single use (P ? 0.001). Conclusion: Under the conditions of this study, TF manufactured by new technique performed better than K3 systems when used up to size 25/06 in simulated S-shaped canals. Clinical significance: The flexibility of thermomechanically treated files is beneficial in canals with multiple curvatures;however, attention should be paid to the instrument taper and final apical size of the preparation.

Frequent Breaches in Irrigation Canals in Sindh Pakistan

Every year, a number of breach failures occur in Irrigation Canals in Sindh. Those failures cause displacement of thousands of people, destruction of properties, land, and damage to costly crops that worth millions Rupees. In addition to that, breach failures also can cause water shortages when the failure occurs during the peak demand period. There are various causes of embankment failures which include overtopping, internal erosion, structural defects and piping. State of art for breach failures is presented in this paper and suggestions for prediction of breaches in context to canals in Sindh are discussed. Seepage and slope stability analyses are recommended for a long-term breach predictions.