A novel non-separation opening scheme of front cover for rocket launch canister

In view of that existing opening technologies of front cover for rocket launch canister have disadvantages such as causing damage on the ground equipment,not being reused and easily broken.A novel reusable non-separation spring-driven opening scheme is proposed to achieve rapid and reliable opening of the front cover.The mathematical model of the opening process of the front cover is established by the rigid body dynamics theory.To establish a response surface model to optimize the opening scheme,three main influencing factors of the opening process are obtained through the designed experiments,including the pre-compression,the stiffness of the thrust spring,and the thrust spring force arm length.In addition,the prescribed kinematic law was taken as constraint,and the smaller thrust spring preliminary pressure and angular velocity was taken as optimization expectations.The results show that the opening scheme meets the design requirements on opening process well.It also shows that the optimized scheme can reduce the kinetic energy of the front cover,and the impact on the canister effectively,achieving a reliable and rapid opening of the front cover.

Possible Effect of Pressure Solution on the Movement of a Canister in the Buffer of Geological Disposal System

One of the major concepts of the geological disposal of high level radioactive waste is to enclose a metallic container with bentonite buffer which is considered to be impermeable and chemically stable. Since the average density of the container is around 6 to 7 and very heavy compared to bentonite, the scenario of container sinking has been evaluated because excess sinking makes short the pathway of nuclide migration in the bentonite and is detrimental to the safety of the disposal system. Previous considerations on container sinking have been made from the viewpoint of mechanical deformation of the bentonite. In this paper, a chemical deformation process is presented as another mechanism of container sinking, which has not been previously considered for the container sinking in the field of radioactive waste disposal. The chemical deformation mentioned in this paper is the deformation through the process of pressure solution of minerals constituting the buffer, transportation by diffusion and precipitation. That such chemical deformation is a ubiquitous phenomenon occurring in various scales in the crust of the earth will be shown through the review of previous works. Then, some future research topics will be suggested which would be required in order to evaluate the container sinking in the safety case for radioactive waste disposal.

Finite Element Analysis on a Square Canister Piezoelectric Energy Harvester in Asphalt Pavement

A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy from the asphalt pavement in a large scale. The open circuit voltage of the harvester was obtained by the piezoelectric constant d33 of the piezoelectric ceramic. The harvester is different from the cymbal harvester which works by the piezoelectric constant d31. The finite element model of the single harvester was constructed. The open circuit voltage increased with increase of the outer load. The finite element model of the single harvester buried in the asphalt pavement was built. The open circuit voltage, the deformation difference percent and the stress of the ceramic of the harvester were obtained with different buried depth. The open circuit voltage decreased when the buried depth was increased. The proper buried depth of the harvester should be selected as 30 - 50 mm. The effects of structure parameters on the open circuit voltage were gotten. The output voltage about 64.442 V could be obtained from a single harvester buried under 40 mm pavement at the vehicle load of 0.7 MPa. 0.047 mJ electric energy could be gotten in the harvester. The output power was about 0.705 mW at 15 Hz vehicle load frequency.

室内空气中单萜类化合物检测方法的研究

Monoterpenoids are widely existing in indoor air.A GC-MS method was established for determination of monoterpenoids in the indoor air by using silonite coated canisters(SUMMA canisters),and preconcentrating low level samples utilizing three stages focuser.The method was suitable for the determination of trace VOCs in indoors air.The detection limits of method for α-pinene and β-pinene were both 0.71 μg/m3.

IN—SITU MEASUREMENTS OF RADON EXHALATION RATE FROM BUILDING SURFACE IN HONG KONG

EPA-standardized activated charcoal canisters were used to collect radon exhaled from building surfaces and analyzed using γ-spectroscopy to obtain the radon exhalation rates. More than 120 samples were analyzed in more than 10 buildings situated in different areas of Hong Kong. Variations were identified in the exhalation rates at different levels in a building, for different covering materials and for the presence of cracks in walls. The radon exhalation rate from the most common concrete walls and covering materials was found to be approximately 13 mBq·m-2·s-1. This may be the cause of a relatively high indoor radon concentration in Hong Kong.