Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied with cyanide leaching liquor of gold ores, containing various kinds of ions. The adsorbed leaching liquor was analyzed by atomic emission...Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied with cyanide leaching liquor of gold ores, containing various kinds of ions. The adsorbed leaching liquor was analyzed by atomic emission spectroscopy and colorimetric method. The contents of various kinds of ions in ACFF were determined with X-ray photoctron spectroscopy. ACFF not only adsorbed gold but also adsorbed arsenic, nickel, zinc, calcium, sulphur, bismuth, copper, iron, silver and cyanide anion. Atomic percentage of C and those of O, N, Zn, Fe increase and decrease respectively with the increase of the layer depth, while those of Ca, Au, Ag keep constant.展开更多
Described here are the fabrication and characterization of carbon fiber cylinder ultramicroelectrodes with cylinder length of less than 100 am, total tip diameter of several hundreds nanometers. The electrodes have be...Described here are the fabrication and characterization of carbon fiber cylinder ultramicroelectrodes with cylinder length of less than 100 am, total tip diameter of several hundreds nanometers. The electrodes have been fabricated by direct etching of carbon fiber using an ion beam thinner. Optical microscopy, scanning electron microscopy (SEM), cyclic voltammetry have been employed to characterize those electrodes. The experimental results obtained indicate the electrodes can be used for in vivo detection of neurotransmitters such as dopamine, 5—hydroxytryptamine in a single cell.展开更多
Carbon nanotube(CNT)fibers have great promise for constructing multifunctional fabrics with high electrical conductivity,good electro-heating ability,excellent flexibility,and a low density.However,the inter-fiber con...Carbon nanotube(CNT)fibers have great promise for constructing multifunctional fabrics with high electrical conductivity,good electro-heating ability,excellent flexibility,and a low density.However,the inter-fiber contacts in the fabric greatly reduce these advantages and limit their application.Herein,a simple pressure-fusing method to fabricate single-wall CNT(SWCNT)fiber non-woven fabrics(NWFs)that are composed of interconnected SWCNT fibers with fused joints is reported,which have good flexibility,a low density of 0.46 g/cm^(3),a high electrical conductivity of 3.7×10^(5)S/m,and a record high specific electrical conductivity of 803(S·m^(2))/kg.They also showed excellent electrical heating ability,so that a temperature of~160℃was rapidly reached at a low voltage of 2 V.Combined with their low density,the SWCNT fiber NWFs are promising for use as a heating unit for low temperature battery protection and de-icing applications.展开更多
The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper ...The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper aims to solve these problems.The theoretical and experimental dependence of porosity on the applied pressure were determined.The possibility of obtaining a carbon fiber/aluminum matrix composite wire with a strength value of about 1500 MPa was shown.The correlation among the strength of the carbon fiber reinforced aluminum matrix composite,the fracture surface,and the degradation of the carbon fiber surface was discussed.展开更多
The field of electromagnetic wave absorption(EWA)requires the adaptability,tenability,and multifunction of high-performance materials in the future.The design and preparation of EWA materials aiming at performance req...The field of electromagnetic wave absorption(EWA)requires the adaptability,tenability,and multifunction of high-performance materials in the future.The design and preparation of EWA materials aiming at performance requirements is the latest research hotspot.Here,a performancedriven strategy for simultaneously coordinating different target performances was proposed to optimize the structure of the periodical long continuous carbon/glass fiber fabric(PCGF)materials through algorithm and simulation.The optimized structure of the PCGF not only improves the impedance matching,but also introduces the induced orientation effect for a high cooperative loss of conductivity,resonance,and periodic structure.The flexible PCGF shows a broad effective absorption bandwidth(EAB)of 32.7 GHz covering a part of the C-band and the whole X-,Ku-,K-,and Ka-bands with a thickness(d)of only 0.92 mm and a density of 5.6×10^(−4) kg·cm^(−3).This highly designable fabric is promising for the EWA practical application owing to integrating the characteristics of good flexibility,acid and alkali resistance,bending resistance,excellent mechanical properties,and easy large-scale preparation.展开更多
文摘Adsorption capacity of ACFF in cyanide leaching liquor of gold ores was studied with cyanide leaching liquor of gold ores, containing various kinds of ions. The adsorbed leaching liquor was analyzed by atomic emission spectroscopy and colorimetric method. The contents of various kinds of ions in ACFF were determined with X-ray photoctron spectroscopy. ACFF not only adsorbed gold but also adsorbed arsenic, nickel, zinc, calcium, sulphur, bismuth, copper, iron, silver and cyanide anion. Atomic percentage of C and those of O, N, Zn, Fe increase and decrease respectively with the increase of the layer depth, while those of Ca, Au, Ag keep constant.
基金This project was supported by the National Science Foundation of China and Doctoral Programme from State Education Commission Foundation of China
文摘Described here are the fabrication and characterization of carbon fiber cylinder ultramicroelectrodes with cylinder length of less than 100 am, total tip diameter of several hundreds nanometers. The electrodes have been fabricated by direct etching of carbon fiber using an ion beam thinner. Optical microscopy, scanning electron microscopy (SEM), cyclic voltammetry have been employed to characterize those electrodes. The experimental results obtained indicate the electrodes can be used for in vivo detection of neurotransmitters such as dopamine, 5—hydroxytryptamine in a single cell.
基金the National Key R&D Program of China(No.2022YFA1203302)the National Natural Science Foundation of China(Nos.52130209,52188101,and 52072375)+1 种基金Liaoning Revitalization Talents Program(No.XLYC2002037)Basic Research Project of Natural Science Foundation of Shandong Province,China(No.ZR2019ZD49).
文摘Carbon nanotube(CNT)fibers have great promise for constructing multifunctional fabrics with high electrical conductivity,good electro-heating ability,excellent flexibility,and a low density.However,the inter-fiber contacts in the fabric greatly reduce these advantages and limit their application.Herein,a simple pressure-fusing method to fabricate single-wall CNT(SWCNT)fiber non-woven fabrics(NWFs)that are composed of interconnected SWCNT fibers with fused joints is reported,which have good flexibility,a low density of 0.46 g/cm^(3),a high electrical conductivity of 3.7×10^(5)S/m,and a record high specific electrical conductivity of 803(S·m^(2))/kg.They also showed excellent electrical heating ability,so that a temperature of~160℃was rapidly reached at a low voltage of 2 V.Combined with their low density,the SWCNT fiber NWFs are promising for use as a heating unit for low temperature battery protection and de-icing applications.
基金financially supported by ISSP RAS-Russian Government contracts
文摘The main problems with the liquid-phase technology of carbon fiber/aluminum matrix composites include poor wetting of the fiber with liquid aluminum and formation of aluminum carbide on the fibers’surface.This paper aims to solve these problems.The theoretical and experimental dependence of porosity on the applied pressure were determined.The possibility of obtaining a carbon fiber/aluminum matrix composite wire with a strength value of about 1500 MPa was shown.The correlation among the strength of the carbon fiber reinforced aluminum matrix composite,the fracture surface,and the degradation of the carbon fiber surface was discussed.
基金supported by the National Natural Science Foundation of China (51772060,51672059,and 51621091)financially sponsored by Heilongjiang Touyan Team Program and the Fundamental Research Funds for the Central Universities (HIT.OCEF.2021003).
文摘The field of electromagnetic wave absorption(EWA)requires the adaptability,tenability,and multifunction of high-performance materials in the future.The design and preparation of EWA materials aiming at performance requirements is the latest research hotspot.Here,a performancedriven strategy for simultaneously coordinating different target performances was proposed to optimize the structure of the periodical long continuous carbon/glass fiber fabric(PCGF)materials through algorithm and simulation.The optimized structure of the PCGF not only improves the impedance matching,but also introduces the induced orientation effect for a high cooperative loss of conductivity,resonance,and periodic structure.The flexible PCGF shows a broad effective absorption bandwidth(EAB)of 32.7 GHz covering a part of the C-band and the whole X-,Ku-,K-,and Ka-bands with a thickness(d)of only 0.92 mm and a density of 5.6×10^(−4) kg·cm^(−3).This highly designable fabric is promising for the EWA practical application owing to integrating the characteristics of good flexibility,acid and alkali resistance,bending resistance,excellent mechanical properties,and easy large-scale preparation.
