Method to measure tree-ring width,density,elemental composition,and stable carbon and oxygen isotopes using one sample

Tree-ring width(RW),density,elemental com-position,and stable carbon and oxygen isotope(δ^(13)C,δ^(18)O)are widely used as proxies to assess climate change,ecology,and environmental pollution;however,a specific pretreat-ment has been needed for each proxy.Here,we developed a method by which each proxy can be measured in the same sample.First,the sample is polished for ring width meas-urement.After obtaining the ring width data,the sample is cut to form a 1-mm-thick wood plate.The sample is then mounted in a vertical sample holder,and gradually scanned by an X-ray beam.Simultaneously,the count rates of the fluorescent photons of elements(for chemical characteriza-tion)and a radiographic grayscale image(for wood density)are obtained,i.e.the density and the element content are obtained.Then,cellulose is isolated from the 1-mm wood plate by removal of lignin,and hemicellulose.After producing this cellulose plate,cellulose subsamples are separated by knife under the microscope for inter-annual and intra-annual stable carbon and oxygen isotope(δ^(13)C,δ^(18)O)analysis.Based on this method,RW,density,elemental composition,δ^(13)C,and δ^(18)O can be measured from the same sample,which reduces sample amount and treatment time,and is helpful for multi-proxy comparison and combination research.

Characteristics of carbon isotopic composition of alkane gas in large gas fields in China

Exploration and development of large gas fields is an important way for a country to rapidly develop its natural gas industry.From 1991 to 2020,China discovered 68 new large gas fields,boosting its annual gas output to 1925×108m3in 2020,making it the fourth largest gas-producing country in the world.Based on 1696 molecular components and carbon isotopic composition data of alkane gas in 70 large gas fields in China,the characteristics of carbon isotopic composition of alkane gas in large gas fields in China were obtained.The lightest and average values ofδ^(13)C_(1),δ13C2,δ13C3andδ13C4become heavier with increasing carbon number,while the heaviest values ofδ^(13)C_(1),δ13C2,δ13C3andδ13C4become lighter with increasing carbon number.Theδ^(13)C_(1)values of large gas fields in China range from-71.2‰to-11.4‰(specifically,from-71.2‰to-56.4‰for bacterial gas,from-54.4‰to-21.6‰for oil-related gas,from-49.3‰to-18.9‰for coal-derived gas,and from-35.6‰to-11.4‰for abiogenic gas).Based on these data,theδ^(13)C_(1)chart of large gas fields in China was plotted.Moreover,theδ^(13)C_(1)values of natural gas in China range from-107.1‰to-8.9‰,specifically,from-1071%o to-55.1‰for bacterial gas,from-54.4‰to-21.6‰for oil-related gas,from-49.3‰to-13.3‰for coal-derived gas,and from-36.2‰to-8.9‰for abiogenic gas.Based on these data,theδ^(13)C_(1)chart of natural gas in China was plotted.

Effects of thinning and understory removal on water use efficiency of Pinus massoniana:evidence from photosynthetic capacity and stable carbon isotope analyses

Understanding the relationship between forest management and water use efficiency(WUE)is important for evaluating forest adaptability to climate change.However,the effects of thinning and understory removal on WUE and its key controlling processes are not well understood,which limits our comprehension of the physiological mechanisms of various management practices.In this study,four forest management measures(no thinning:NT;understory removal:UR;light thinning:LT;and heavy thinning:HT)were carried out in Pinus massoniana plantations in a subtropical region of China.Photosynthetic capacity and needle stable carbon isotope composition(δ^(13)C)were measured to assess instantaneous water use efficiency(WUE_(inst))and long-term water use efficiency(WUE_(i)).Multiple regression models and structural equation modelling(SEM)identified the effects of soil properties and physiological performances on WUE_(inst)and WUE_(i).The results show that WUE_(inst)values among the four treatments were insignificant.However,compared with the NT stand(35.8μmol·mol^(-1)),WUE_(i)values significantly increased to 41.7μmol·mol^(-1)in the UR,50.1μmol·mol^(-1)in the LT and 46.6μmol·mol^(-1)in HT treatments,largely explained by photosynthetic capacity and soil water content.Understory removal did not change physiological performance(needle water potential and photosynthetic capacity).Thinning increased the net photosynthetic rate(A_n)but not stomatal conductance(g_s)or predawn needle water potential(ψ_(pd)),implying that the improvement in water use efficiency for thinned stands was largely driven by radiation interception than by soil water availability.In general,thinning may be an appropriate management measure to promote P.massoniana WUE to cope with seasonal droughts under future extreme climates.

Response to the Lomagundi-Jatuli Event in the southwestern margin of the Yangtze Plate:Evidence from the carbon and oxygen isotopes of the Paleoproterozoic Yongjingshao Formation

The Lomagundi-Jatuli Event(LJE)refers to the significant positive carbon isotope excursion in seawater constituents that occurred immediately after the increase in atmospheric oxygen content during the Paleoproterozoic(2.22-2.06 Ga).Theδ^(13)C values of 46 dolostone samples collected from the Paleoproterozoic Yongjingshao Formation varied in the range of 0.05‰-4.95‰(V-PDB;maximum:4.95‰)in this study,which may be related to the multicellular eukaryotes in the Liangshan Formation in the Yimen Group.They are much higher than theδ^(13)C values of marine carbonates(-1.16‰on average).Theδ^(13)C values of other formations in the Paleoproterozoic Yimen Group are negative.The notable positive carbon isotope anomalies of the Yongjingshao Formation indicate the response to the LJE at the southwestern margin of the Yangtze Block,which is reported for the first time.Furthermore,they are comparable to theδ^(13)C values of carbonates in the Dashiling Formation of the Hutuo Group in the Wutaishan area in the North China Craton,the Wuzhiling Formation of the Songshan Group in the Xiong'er area,Henan Province,and the Dashiqiao Formation of the Liaohe Group in the Guanmenshan area,Liaoning Province.Therefore,it can be further concluded that the LJE is a global event.This study reveals that LJE occurred in Central Yunnan at 2.15-2.10 Ga,lasting for about 50 Ma.The macro-columnar,bean-shaped,and microfilament fossils and reticular ultramicrofossils of multicellular eukaryotes in this period were discovered in the Liangshan Formation of the Yimen Group.They are the direct cause for the LJE and are also the oldest paleontological fossils ever found.The major events successively occurring in the early stage of the Earth include the Great Oxygenation Event(first occurrence),the global Superiortype banded iron formations(BIFs),the Huronian glaciation,the Great Oxygenation Event(second occurrence),the explosion of multicellular eukaryotes,the positive carbon isotope excursion,and the global anoxic and selenium-rich sedimentary event.The authors think that the North China Craton and the Yangtze Craton were possibly in different tectonic locations of the same continental block during the Proterozoic.

Evolution of Carbon Isotope Composition in Potential Global Stratotype Section and Point at Luoyixi, South China, for the Base of the Unnamed Global Seventh Stage of Cambrian System

This work deals with the evolution of carbon isotope composition in the Luoyixi （罗依溪） Section, a candidate of the Global Standard Stratotype-section and Point （GSSP）, defining the base of the as-yet-undefined seventh stage of Cambrian System at the first appearance of the cosmopolitan agnostoid Lejopyge iaevigata. This level is favored in a vote of International Subcommission on Cambrian Stratigraphy （ISCS） as the biohorizon for defining the base of a global stage. Two hundred and sixty-four samples for carbon and oxygen isotope analysis have been collected from the carbonate successions at an interval of 0.25 to 0.5 m in this section. Results of the carbon isotope data exhibit a remarkable disciplinarian trend. The pattern of the carbon isotope evolution is gently undulant with a relatively long period during the underlying Drumian Stage, and then the values of δ13C fluctuate sharply with a short period in provisional seventh stage. The onset of sharp fluctuation in the δ13C values begins at the proposed GSSP level, defining the base of the global seventh stage, where δ13C values change from a gentle trend to a sharp trend. Distinct covariant-relationships among δ13C,δ18O, and sea level fluctuations suggest that a warming change in paleoclimate took place during the early global seventh stage, which led to a positive shift in δ13C values.

Sources of organic matter and paleo-environmental implications inferred from carbon isotope compositions of lacustrine sediments at Inexpressible Island, Ross Sea, Antarctica

The carbon isotopic composition of organic matter （δ^13Corg） was determined in two sediment cores （IIL1 and IIL9） recovered from Inexpressible Island, Ross Sea, Antarctica, and analyzed to identify the sources of that organic matter. The δ^13Corg values of sediments of IIL9 were found to vary between -14.6‰ and -11.6‰, with a mean of-13.4‰ （n=48）. These values were significantly higher than those of IIL1 sediments which varied between -23.2‰ and -20.4‰, with a mean of-21.8%o （n=55）. The variation in δ^13Corg values in these two sediment cores indicate different sources of organic matter, The relatively high 6~3Corg values in IIL9 are in accordance with a source from algae, while the low δ^13Corg values in IIL1 evince significant influence from penguin guano with algae as the secondary source. Compared with the reference data from other high-latitude lake sediments and plants, the δ^13Corg values in IIL9 were extremely high, a result likely related to intense competition for CO2 assimilation among algal species during the growing season in this relatively shallow pond. These results indicate that sedimentary δ^13Corg is a reliable proxy for paleo-primary productivity in ponds at Inexpressible Island.

Effects of pretreatment procedures on fatty acid composition and stable carbon isotopes in the marine microalga Isochrysis zhanjiangenisis

This study aims to quantify the effects of different pretreatment methods on the stable carbon isotope values of fatty acids in marine microalgae（Isochrysis zhanjiangenisis）.To identify the effects of sample preparation on theδ^（13）C value and the fatty acid composition,we examined eight types of pretreatment methods including：（a） drying the sample followed by direct methyl esterification using HCl-CH3OH;（b） drying the sample followed by direct methyl esterification using H2SO4-CH3OH;（c） drying the sample by ultrasonic extraction and methylesterification using HCl-CH3OH;（d） drying the sample by ultrasonic extraction and methyl-esterification using H2SO4-CH3OH;（e） fresh sample followed by direct methyl-esterification using HCl-CH3OH;（f） fresh sample followed by direct methyl-esterification using H2SO4-CH3OH;（g） fresh sample with ultrasonic extraction followed by methyl-esterification using HCl-CH3OH,and（h） fresh sample with ultrasonic extraction followed by methylesterification using H2SO4-CH3 OH.The results show that the δ^（13）C values from Groups a-e,g and h fluctuated within 0.3‰,and the δ^（13）C values of Group f were approximately 0.7‰ lower than the other seven groups.Therefore,the different sample pretreatment methods used towards the extraction of fatty acids from marine microalgae may result in different results regarding the stable carbon isotope ratios,and if necessary a correction should be applied.

Laser‑Induced and MOF‑Derived Metal Oxide/Carbon Composite for Synergistically Improved Ethanol Sensing at Room temperature

Advancements in sensor technology have significantly enhanced atmospheric monitoring.Notably,metal oxide and carbon(MO_(x)/C)hybrids have gained attention for their exceptional sensitivity and room-temperature sensing performance.However,previous methods of synthesizing MO_(x)/C composites suffer from problems,including inhomogeneity,aggregation,and challenges in micropatterning.Herein,we introduce a refined method that employs a metal–organic framework(MOF)as a precursor combined with direct laser writing.The inherent structure of MOFs ensures a uniform distribution of metal ions and organic linkers,yielding homogeneous MO_(x)/C structures.The laser processing facilitates precise micropatterning(<2μm,comparable to typical photolithography)of the MO_(x)/C crystals.The optimized MOF-derived MO_(x)/C sensor rapidly detected ethanol gas even at room temperature(105 and 18 s for response and recovery,respectively),with a broad range of sensing performance from 170 to 3,400 ppm and a high response value of up to 3,500%.Additionally,this sensor exhibited enhanced stability and thermal resilience compared to previous MOF-based counterparts.This research opens up promising avenues for practical applications in MOF-derived sensing devices.

Regulatable Orthotropic 3D Hybrid Continuous Carbon Networks for Efficient Bi-Directional Thermal Conduction

Vertically oriented carbon structures constructed from low-dimen-sional carbon materials are ideal frameworks for high-performance thermal inter-face materials(TIMs).However,improving the interfacial heat-transfer efficiency of vertically oriented carbon structures is a challenging task.Herein,an orthotropic three-dimensional(3D)hybrid carbon network(VSCG)is fabricated by depositing vertically aligned carbon nanotubes(VACNTs)on the surface of a horizontally oriented graphene film(HOGF).The interfacial interaction between the VACNTs and HOGF is then optimized through an annealing strategy.After regulating the orientation structure of the VACNTs and filling the VSCG with polydimethylsi-loxane(PDMS),VSCG/PDMS composites with excellent 3D thermal conductive properties are obtained.The highest in-plane and through-plane thermal conduc-tivities of the composites are 113.61 and 24.37 W m^(-1)K^(-1),respectively.The high contact area of HOGF and good compressibility of VACNTs imbue the VSCG/PDMS composite with low thermal resistance.In addition,the interfacial heat-transfer efficiency of VSCG/PDMS composite in the TIM performance was improved by 71.3%compared to that of a state-of-the-art thermal pad.This new structural design can potentially realize high-performance TIMs that meet the need for high thermal conductivity and low contact thermal resistance in interfacial heat-transfer processes.

Ti_(3)C_(2)T_(x) MXene/carbon composites for advanced supercapacitors:Synthesis,progress,and perspectives

MXenes are a family of two-dimensional(2D)layered transition metal carbides/nitrides that show promising potential for energy storage applications due to their high-specific surface areas,excellent electron conductivity,good hydrophilicity,and tunable terminations.Among various types of MXenes,Ti_(3)C_(2)T_(x) is the most widely studied for use in capacitive energy storage applications,especially in supercapacitors(SCs).However,the stacking and oxidation of MXene sheets inevitably lead to a significant loss of electrochemically active sites.To overcome such challenges,carbon materials are frequently incorporated into MXenes to enhance their electrochemical properties.This review introduces the common strategies used for synthesizing Ti_(3)C_(2)T_(x),followed by a comprehensive overview of recent developments in Ti_(3)C_(2)T_(x)/carbon composites as electrode materials for SCs.Ti_(3)C_(2)T_(x)/carbon composites are categorized based on the dimensions of carbons,including 0D carbon dots,1D carbon nanotubes and fibers,2D graphene,and 3D carbon materials(activated carbon,polymer-derived carbon,etc.).Finally,this review also provides a perspective on developing novel MXenes/carbon composites as electrodes for application in SCs.

A review of physicochemical properties of dissolved organic carbon and its impact over mountain glaciers

Investigating the characteristics and transformation of water-soluble carbonaceous matter in the cryosphere regions is important for understanding biogeochemical process in the earth system.Water-soluble carbonaceous matter is a heterogeneous mixture of organic compounds that is soluble in aquatic environments.Despite its importance,we still lack systematic understanding for dissolved organic carbon(DOC)in several aspects including exact chemical composition and physical interactions with microorganisms,glacier meltwater.This review presents the chemical composition and physical properties of glacier DOC deposited through anthropogenic emission,terrestrial,and biogenic sources.We present the molecular composition of DOC and its effect over snow albedo and associated radiative forcings.Results indicate that DOC in snow/ice is made up of aromatic protein-like species,fulvic acid-like materials,and humic acid-like materials.Light-absorbing impurities in surface snow and glacier ice cause considerable albedo reduction and the associated radiative forcing is definitely positive.Water-soluble carbonaceous matter dominated the carbon transport in the high-altitude glacial area.Owing to prevailing global warming and projected increase in carbon emission,the glacial DOC is expected to release,which will have strong underlying impacts on cryosphere ecosystem.The results of this work have profound implications for better understanding the carbon cycle in high altitude cryosphere regions.A new compilation of globally distributed work is required,including large-scale measurements of glacial DOC over high-altitude cryosphere regions,to overcome and address the scientific challenges to constrain climate impacts of light-absorbing impurities related processes in Earth system and climate models.

Origin of hydrocarbon fluids and discussion of abnormal carbon isotopic compositions in the Lishui-Jiaojiang Sag,East China Sea Shelf Basin

The hydrocarbon gases in the L1 gas field of the Lishui-Jiaojiang Sag have been commonly interpreted to be an accumulation of pure sapropelic-type thermogenic gas.In this study,chemical components,stable isotopic compositions,and light hydrocarbons were utilized to shed light on the origins of the hydrocarbon fluids in the L1gas pool.The hydrocarbon fluids in the L1 gas pool are proposed to be a mixture of three unique components:mid-maturity oil from the middle Paleocene coastal marine Lingfeng source rock,oil-associated(late oil window)gas generated from the lower Paleocene lacustrine Yueguifeng source rock,and primary microbial gas from the paralic deposits of the upper Paleocene Mingyuefeng source rock.Here,for the first time,the hydrocarbon gases in the L1 gas pool are diagnosed as mixed oil-associated sapropelic-type gas and microbial gas via four pieces of principal evidence:(1)The abnormal carbon isotopic distributions of all methane homologues from C_(1)(CH_(4)or methane)to C_(5)(C_(5)H_(12)or pentane)shown in the Chung plot;(2)the diagnostic~(13)C-depleted C_(1)compared with the thermogenic sapropelic-type gas model,whileδ^(13)C_(2)(C_(2)H_(6)or ethane)andδ^(13)C_(3)(C_(3)H_(8)or propane)both fit perfectly;(3)the excellent agreement of the calculated carbon isotopic compositions of the pure thermogenic gas with the results of the thermal simulated gas from the type-II1 kerogen-rich Yueguifeng source rock;and(4)the oil-associated gas inferred from various binary genetic diagrams with an abnormally elevated gas oil ratio.Overall,the natural gases of the L1 gas pool were quantified in this study to comprise approximately 13%microbial gas,nearly 48%oil-associated sapropelic-type gas,and 39%of nonhydrocarbon gas.The microbial gas is interpreted to have been codeposited and entrained in the humic-kerogen-rich Mingyuefeng Formation under favorable lowtemperature conditions during the late Paleocene-middle Eocene.The microbial gas subsequently leaked into the structurally and stratigraphically complex L1 trap with oil-associated sapropelic-type gas from the Yueguifeng source rock during the late Eocene-Oligocene uplifting event.A small amount of humic-kerogen-generated oil in the L1 gas pool is most likely to be derived from the underlying Lingfeng source rock.The detailed geological and geochemical considerations of source rocks are discussed to explain the accumulation history of hydrocarbon fluids in the L1 gas pool.This paper,therefore,represents an effort to increase the awareness of the pitfalls of various genetic diagrams,and an integrated geochemical and geological approach is required for hydrocarbonsource correlation.

Electrostatic Interaction-directed Construction of Hierarchical Nanostructured Carbon Composite with Dual Electrical Conductive Networks for Zinc-ion Hybrid Capacitors with Ultrastability

Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-liquid synthesis method has a great challenge because of the simultaneous heterogeneous nucleation on substrates and the self-nucleation of individual MOF nanocrystals in the liquid phase.Herein,we report a bidirectional electrostatic generated self-assembly strategy to achieve the precisely controlled coatings of single-layer nanoscale MOFs on a range of substrates,including carbon nanotubes(CNTs),graphene oxide(GO),MXene,layered double hydroxides(LDHs),MOFs,and SiO_(2).The obtained MOF-based nanostructured carbon composite exhibits the hierarchical porosity(V_(meso)/V_(micro)∶2.4),ultrahigh N content of 12.4 at.%and"dual electrical conductive networks."The assembled aqueous zinc-ion hybrid capacitor(ZIC)with the prepared nanocarbon composite as a cathode shows a high specific capacitance of 236 F g^(-1)at 0.5 A g^(-1),great rate performance of 98 F g^(-1)at 100 A g^(-1),and especially,an ultralong cycling stability up to 230000 cycles with the capacitance retention of 90.1%.This work develops a repeatable and general method for the controlled construction of MOF coatings on various functional substrates and further fabricates carbon composites for ZICs with ultrastability.

Rare earth elements(REE)and isotope composition(δ^(13)C andδ^(18)O)of manganese ores of Chiatura deposit(Georgia):features of ore formation and genesis

The rare earth elements(REE)geochemistry and the isotope(δ^(13)C,δ^(18)O)composition of manganese ores of the Chiatura(Georgia)deposit were studied.One of the major features of all types of manganese ores is negative cerium(Ce/Ce*_(PAAS))anomaly and the absence of europium(Eu/Eu*_(PAAS))anomaly.Oxide oolitic manganese ores were formed in oxic shallow marine environments.The content and distribution of REEs(in particular Ce and Eu)in these ores are connected mainly with ferrous oxides.The performed C-and O-isotope research in Mn-carbonates(oolitic and massive)has indicated that carbonate ores were formed by the participation of isotopic ally light CO_(2)which is a result of the oxidation of organic matter in the sediment strata by reducing environments of early diagenesis(and,partially,catagenesis)zone.Obtained negative cerium anomalies in the studied carbonate ores reflect the specific REE patterns in pore waters of sediments of earlier isdiagenesis zone of the Oligocene Chiatura's basin.The deficiency of cerium in this zone remains debatable and requires further study.Formation of manganese carbonates took place multistage by the input of incisional solutions of different chemistry into sea bottom waters and sediments.The absence of europium anomaly indicates about lack of hydrothermal solution input.

Carbon and oxygen isotope characteristics of foraminiferan from northern South China Sea sediments and their significance to late Quaternary hydrate decomposition

Carbon and oxygen isotope and dating analyses of foraminiferan in sediment cores collected from three different areas of the northern slope of the South China Sea were conducted, in order to examine the records of the gas hydrate decomposition events since the late Quaternary under the conditions of methane seepage. The results show that： 1） the δ13C values of the benthic foraminiferan Uvigerina spp. （size range of 0.25-0.35 ram） are from -0.212% to -0.021% and the δ180 values of the planktonic foraminiferan Globigerinoides ruber （size range of 0.25-0.35 ram） are from -0.311% to -0.060%; 2） three cores （ZD2, ZD3 and ZS5） from the bottom of a hole are aged for 11 814, 26 616 and 64 090 a corresponding to the early oxygen isotope stage （MIS） Ⅰ, Ⅲ and Ⅳ final period, respectively; 3） a negative-skewed layer of carbon isotope corresponds to that of MIS II （cold period）, whose degree of negative bias is -0.2%0; and 4） the δ13C compositions of foraminiferans are similar to those of the Blake Ridge and the Gulf of Mexico sediments of the late Quaternary. According to the analysis, the reasons for these results are that the studied area is a typical area of methane seep environment in the area during MIS II due to the global sea-level fall and sea pressure decrease. Gas hydrate is decomposed and released, and a large number of light carbon isotopes of methane are released into the ocean, dissolved to inorganic carbon （DIC） pool and recorded in the foraminiferan shells. A pyrite layer developed in the negative bias layers of the foraminiferans confirms that the δ13C of foraminiferans is more affected by methane and less by the reduction of marine productivity and early diagenesis. The use of foraminiferan δ13C could accurately determine late Quaternary hydrate release events and provide evidence for both reconstructing the geological history of methane release events and exploring natural gas hydrate.

Carbon isotopic compositions of mono-, di-, tri-aromatics provide insights into the source of sulfur-rich crude oils in the Huanghekou Depression, Bohai Bay Basin

The stable carbon isotope compositions (δ13C) of individual aromatic hydrocarbons have been analyzed in sulfur-rich and sulfur-lean crude oils from the Huanghekou Depression, Bohai Bay Basin. The δ13C values of individual aromatic hydrocarbons, including alkylbenzenes, alkylnaphthalenes, alkylphenanthrenes, alkylfluorenes and alkyldibenzothiophenes, are reported. The main aims are to find out the origin of these oils and their relationship to paleoclimate. The distribution of aromatic hydrocarbons and maturity parameters show the oils all stay in the low-mature to mature stage. Meanwhile, aromatic hydrocarbons are mainly derived from the diagenetic/catagenetic origin. The δ13C values for 1,2,4-trimethylbenzene (−30.7‰ to −28.8‰) and 1,2,3,4-tetramethylbenzene (−32.4‰ to −26.3‰) indicate the algae-derived organic matter for alkylbenzenes. Some isomers, such as 1,7-+1,3-+1,6-dimethylnaphthalene, 1,2,5-trimethylnaphthalene, 1,2,5,6-+1,2,3,5-tetramethylnaphthalene, 1,10-+1,3-+3,10-+3,9-dimethylphenanthrenes, 1,6-+2,9-+2,5-dimethylphenanthrenes and 4,9-+4,10-+1,9- dimethylphenanthrenes show isotopic depletion (−34.9‰ to −25.2‰), indicating the major contribution of algae for these compounds. Meanwhile, isotopically depleted (−33.6‰ to −26.7‰) alkyldibenzothiophenes represent the algae input. δ13C values for mainly algae-derived naphthalene to trimethylnaphthalenes of sulfur-rich oils are more enriched than those of sulfur-lean oil, with the most significant difference of 4.4‰, indicating that the aridity of the environment and stratified water column result in the enrichment in 13C.

Quantitatively unmixing method for complex mixed oil based on its fractions carbon isotopes: A case from the Tarim Basin, NW China

Deep mixed oils with secondary alterations have been widely discovered in the Tarim Basin,but current methods based on biomarkers and isotopes to de-convolute mixed oil cannot calculate the exact mixing proportion of different end-member oils,which has seriously hindered further exploration of deep hydrocarbons in the study area.To solve this problem,we constructed a novel method based on the carbon isotope(δ13C)of the group components to de-convolute mixed liquid hydrocarbons under the material balance principle.The results showed that the mixed oil in the Tazhong Uplift was dominantly contributed at an average proportion of 68% by an oil end-member with heavier d13C that was believed to be generated from the Cambrian-Lower Ordovician source rocks,whereas the mixed oil in the Tabei Uplift was predominantly contributed at an average proportion of 61% by an oil end-member with lighter d13C that was believed to be generated from the Middle-Upper Ordovician source rocks.This indicates that,on the basis of the detailed description of the distribution of effective source rocks,the proposed method will be helpful in realizing differential exploration and further improving the efficiency of deep liquid hydrocarbon exploration in the Tarim Basin.In addition,compared to traditional δ13C methods for whole oil and individual n-alkanes in de-convoluted mixed oil,the proposed method has a wider range of applications,including for mixed oils with variations in color and density,indicating potential for promoting the exploration of deep complex mixed oils in the Tarim Basin and even around the world.

Carbon isotope ratios of n-alkanoic acids: new organic proxies for paleo-productivity in Antarctic ponds

Primary productivity in the Antarctic aquatic environment with simple ecosystems is sensitive to climate and environmental fluctuations.We investigatedδ13C values for n-alkanoic acids derived from phototrophic organisms in a lacustrine sediment core(IIL3)to indicate primary productivity in ponds on Inexpressible Island in the western Ross Sea,Antarctica.Short-chain n-alkanoic acids(C14–C18)were abundant in the IIL3 sediment profile.The carbon isotope ratios of short-chain n-alkanoic acids in the sediment samples and floating microbial mats were similar,indicating that the short-chain n-alkanoic acids in the IIL3 sediment profile predominantly originated from phototrophic organisms.Theδ13C values for the short-chain n-alkanoic acids varied widely through the sediment profile,and 13C-enrichment of n-alkanoic acids was most likely related to high productivity due to carbon-limited conditions caused by enhanced photosynthetic efficiency.Theδ13C values for the n-alkanoic acids changed over the past 3200 years in similar ways to organic proxies for aquatic productivity(n-alkanoic acid and sterol sedimentary fluxes).C16 n-alkanoic acid was enriched in 13C in periods of high aquatic productivity~750–1650 and 3000–3200 a BP but depleted in 13C in periods of relatively low productivity~150–600 and 2500–3000 a BP.The results indicated that carbon isotope ratios of lipids from phototrophic organisms could be used as new proxies to reconstruct paleo-productivity in Antarctic lakes and ponds and therefore improve our understanding of past climate changes.

Global significance of oxygen and carbon isotope compositions of pedogenic carbonates since the Cretaceous

Few global syntheses of oxygen and carbon isotope composition of pedogenic carbonates have been attempted,unlike marine carbonates.Pedogenic carbonates represent in-situ indicators of the climate conditions prevailing on land.The δ^(18)O and δ^(13)C values of pedogenic carbonates are controlled by local and global factors,many of them not affecting the marine carbonates largely used to probe global climate changes.We compile pedogenic oxygen and carbon isotopic data(N=12,167)fromCretaceous to Quaternary-aged paleosols to identify potential trends through time and tie them to possible controlling factors.While discrete events such as the Paleocene-Eocene Thermal Maximum are clearly evidenced,our analysis reveals an increasing complexity in the distribution of the δ^(18)O vs δ^(13)C values through the Cenozoic.As could be expected,the rise of C4 plants induces a shift towards higherδ13C values during the Neogene and Quaternary.We also show that the increase in global hypsometry during the Neogene plays a major role in controlling the δ^(18)O and δ^(13)C values of pedogenic carbonates by increasing aridity downwind of orographic barriers.Finally,during the Quaternary,an increase of 3‰in δ^(18)O values is recorded both by the pedogenic carbonates and the marine foraminifera suggesting that both indicators may be used to track global climate signal.

Fluid Composition and Carbon & Oxygen Isotope Geochemistry of Cenozoic Alkali Basalts in Eastern China

The fluid compositions of Cenozoic alkali basalts in eastern China have been determined by the pyrolysis MS method, meanwhile the carbon and oxygen isotopic compositions of CO 2 released from these samples at different heating temperatures have been analyzed by the vacuum step heating method. The data show the volatile heterogeneity in upper mantle sources and different evolution trends of alkali basaltic magmas in eastern China, and these alkali basaltic magmas may be generated in the oxidizing milieu, as compared with mantle derived xenoliths in these alkali basalts, and exotic volatile components were mixed into these magmas in the process of their formation and development.