期刊文献+
共找到112篇文章
< 1 2 6 >
每页显示 20 50 100
Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties 被引量:3
1
作者 Li Hong Xiao Cheng Liu Xi Gao Jian 《Chinese Chemical Letters》 SCIE CAS CSCD 2008年第2期227-229,共3页
A novel series of poly(aryl ether sulfone ketone)s (PPESKs) containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were... A novel series of poly(aryl ether sulfone ketone)s (PPESKs) containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures (Tg) and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction (WAXD). 展开更多
关键词 poly(aryl ether sulfone ketone) PHTHALAZINONE BIPHENYL Thermal property Solubility
下载PDF
Allyl-containing Poly(aryl ether sulfone): Synthesis and Crosslinking 被引量:3
2
作者 YU Yun-wu XING Yan GUO Mei-mei LIU Bai-jun JIANG Zhen-hua 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2011年第3期520-523,共4页
A novel type of crosslinkable poly(aryl ether sulfone)(PAES) bearing an allyl pendant(PES-OAllyl) was synthesized by a grafting reaction of hydrophenyl-containing PAES(PES-OH) and allyl bromide. PES-OH was pre... A novel type of crosslinkable poly(aryl ether sulfone)(PAES) bearing an allyl pendant(PES-OAllyl) was synthesized by a grafting reaction of hydrophenyl-containing PAES(PES-OH) and allyl bromide. PES-OH was prepared by a demethylation reaction of a methoxyphenylated PAES(PES-OCH3) in the presence of pyridine/hydrochlo- ride. The PES-OCH3 was synthesized by an aromatic nucleophilic substitution of bis(4-chlorophenyl)sulfone and (p-methoxy)phenylhydroquinone. Both DSC and solubility investigation were used to study the crosslinking behavior of PES-OAllyl. After heat treatment, the glass transition temperature(Tg) value of PES-OAllyl sharply increased from 165 ℃ to 227 ℃. Meanwhile, PES-OAllyl changed from a soluble polymer to an insoluble thermoset. In addition, TGA(thermogravimetric analysis) result suggests that the thermal stability of the crosslinked product was improved. All the data prove that the crosslinked PES-OAllyl could be a potential solvent-resistance high-performance material. 展开更多
关键词 CROSSLINKABLE Grafting reaction poly(aryl ether sulfone)
下载PDF
Synthesis and properties of soluble poly(aryl ether sulfone ether ketone)s copolymers containing pendant methyl groups 被引量:1
3
作者 ZHONG Ming YU Wen-wen SONG Cheng LIU Yong-jun SONG Cai-sheng 《Journal of Chemistry and Chemical Engineering》 2009年第4期26-31,38,共7页
A series of Poly(arly ether sulfone ether ketone)s containing pendant methyl groups were synthesized by the reaction of 4,4'-[sulfonylbis (1,4-phenylene)dioxy] dibenzoyl chloride (SODBC) with 4,4'- diphenoxy d... A series of Poly(arly ether sulfone ether ketone)s containing pendant methyl groups were synthesized by the reaction of 4,4'-[sulfonylbis (1,4-phenylene)dioxy] dibenzoyl chloride (SODBC) with 4,4'- diphenoxy diphenylsulfone (DPODPS), 4,4'- di(2-methylphenoxy) diphenylsulfone (o-Me-DPODPS), 4,4'- di(3-methylphenoxy) diphenylsulfone (m-Me-DPODPS), 4,4'- di (2,6-bimethylphenoxy) biphenylsulfone(o-Me2-DPODPS) respectively, in a mixture of 1,2-dichloroethane (DCE) and N-methylpyrrolidone (NMP). These reactions were catalyzed by anhydrous aluminum chloride (AlCl). The characteristic of copolymers were studied by means of advanced analytical techniques such as FT-IR,1H-NMR, DSC, TGA and WAXD. The results show glass transition temperature (Tg) in the range of 193-206℃, thermally stable in excess of 434℃ and excellent solubility in polar solvents. Methyl-substituted Poly(aryl ether sulfone ketone)s had higher glass transition temperatures, lower initial decomposition temperatures than the unsubstituted ones. 展开更多
关键词 poly (aryl ether sulfone ether ketone)s characterization SOLUBLE pendent methyl groups
下载PDF
SYNTHESIS AND CHARACTERIZATION OF PHTHALAZINONE POLY(ARYL ETHER SULFONE KETONE)WITH CARBONYL GROUP
4
作者 Ying-nan Xuan Yan Gao +1 位作者 Yong Huang Xi-gao Jian Laboratory of Cellulose and Lignocellulosics Chemistry Guangzhou Institute of Chemistry Chinese Academy of Sciences, Guangzhou 510650 China Institute of Chemistry Chinese Academy of Sciences, Beijing 100080 China Department of Polymer Science, College of Chemical Engineering Dalian University of Technology, Dalian 116012, China 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2002年第3期225-229,共5页
A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfone ketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacem... A kind of novel heat-resistant, high performance engineering thermoplastic phthalazinone poly(aryl ether sulfone ketone) (PPESK) containing a carboxyl group in its side chain was prepared by the nucleophilic displacement reaction of 4-(4-hydroxylphenyl)- 1 (2H)-phthalazinone with di(4-chlorophenyl) sulfone, 4,4'-difluoro-benzophenone and phenolphthalin in sulfolane in the presence of K2CO3 to produce high molecular weight polymers which can be dissolved in some polar solvents such as chloroform and nitrobenzene at room temperature and can be easily cast into flexible, yellowish and transparent films. PPESK is an amorphous polymer having a decomposition temperature above 400degreesC, which indicates that it has high thermal stability. At the same time, the thermal properties of PPESKs with dicyandiamide (DICY) as curing agent indicated that the heat-resistance properties of the PPESKs are improved after curing. The apparent activation energy (A-E) of the cross-linking reaction and the reaction order (n) of PPESK/DICY were found to be 52.2 kJ/mol and ca. 1.0, respectively. Therefore, the cross-linking reaction is approximately a first order reaction. 展开更多
关键词 poly(aryl ether sulfone ketone) synthesis active pendant group
下载PDF
Synthesis and Characterization of Poly (Ether Sulfone Ketone) Containing the Phthalazinone Moiety 被引量:1
5
作者 Yan Jun LIU Sheng Jun LIU Xi Gao JIAN(Department of polymer Science, College of Chemical Engineering, DalianUniversity of Technology, Dalian 116012) 《Chinese Chemical Letters》 SCIE CAS CSCD 1998年第3期257-258,共2页
A novel poly (ether sulfone ketone) containing the phthalazinone moiety was prepared by the reaction of 4-)4-hydroxyphenyl) (2H) phthalazin-1-one with activated dichloro-monomers. The polymer was characterized by FT-I... A novel poly (ether sulfone ketone) containing the phthalazinone moiety was prepared by the reaction of 4-)4-hydroxyphenyl) (2H) phthalazin-1-one with activated dichloro-monomers. The polymer was characterized by FT-IR, H-1-NMR, DSC, TGA and X-ray diffraction. 展开更多
关键词 engineering plastics poly (aryl ether sulfone ketone) heterocyclic polymer
全文增补中
A Facile Method for Preparation of Cardo Poly(aryl ether sulfone) Bearing Pendent Sulfoalkyl Groups as Proton Exchange Membranes 被引量:2
6
作者 Li-mei Wang 张奇峰 Suo-bo Zhang 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2015年第9期1225-1233,共9页
A series of cardo poly(aryl ether sulfone) copolymers bearing pendent sulfonic acid groups (SPES-X) have been prepared by a facile chemical graft method. The structure was confirmed by 1H-NMR spectra. The side-cha... A series of cardo poly(aryl ether sulfone) copolymers bearing pendent sulfonic acid groups (SPES-X) have been prepared by a facile chemical graft method. The structure was confirmed by 1H-NMR spectra. The side-chain-type SPES-X membranes show significantly reduced swelling behavior and excellent mechanical properties as well as appropriate proton conductivity compared to the main-chain-type sulfonated polymers with similar ion exchange capacity (IEC) value. Moreover, they show methanol permeability in the range of 0.6 × 10^-7-5.7 × 10^-7 cmE/s which is lower than that of Nafion 117. All the results indicate that the SPES-Xmembranes are promising candidates for the direct methanol fuel cells. 展开更多
关键词 Side-chain type cardo poly(aryl ether sulfone) Proton exchange membrane.
原文传递
Preparation and Properties of Poly(aryl ether sulfone ketone)Ultrafiltration Membrane Containing Fluorene Group for High Temperature Condensed Water Treatment 被引量:3
7
作者 Xiang-Li Meng Gen-Hua Yu Jian Ma 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2018年第8期970-978,共9页
Novel poly(aryl ether sulfone ketone)s (PAESK) were synthesized from bisphenol A (BPA), 9,9'-bis(4-hydroxyphenyl) fluorene (BHPF), 4,4'-dichlorodiphenylsulfone (DCS) and 4,4'-difluorobenzophenone (DFB... Novel poly(aryl ether sulfone ketone)s (PAESK) were synthesized from bisphenol A (BPA), 9,9'-bis(4-hydroxyphenyl) fluorene (BHPF), 4,4'-dichlorodiphenylsulfone (DCS) and 4,4'-difluorobenzophenone (DFB) via nucleophilic substitution polymerization, which were subsequently used to fabricate ultrafiltration membrane by phase-inversion method for high temperature condensed water treatment. The obtained high molecular weight co-polymers with fluorene group with good solubility and good thermal stability, can be easily cast into flexible, white and non-transparent fiat films. The influence of molar ratio of BPA and BHPF on the properties of the prepared co-polymers and membranes was investigated in detail. SEM study of the morphology of the membranes indicated that the prepared membranes possessed homogeneous pores on the top surface and were sponge-like or finger-like in cross-section. Pure water flux of the membranes increased from 71.87 L·m-2.h-1 to 247.65 L·m-2.h-1, while the retention of BSA decreased slightly, and the water contact angle decreased from 82.1 ° to 55.6° with the PVP concentration from 0 wt% to 10 wt%. With increasing concentration of PVP, the mechanical properties of membranes decreased, while the thermal stability increased. The permeate flux measurement showed that the PAESK membrane had the potential for high temperature condensed water treatment. 展开更多
关键词 poly(aryl ether sulfone ketone) Fluorene group Thermal stability Ultrafiltration membrane
原文传递
Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes 被引量:1
8
作者 JIANG Hongchuan YANG Xia +3 位作者 FENG Yong WANG Xinyu GENG Zhi HUO Mingxin 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2019年第4期714-720,共7页
A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ethe... A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment. 展开更多
关键词 poly(aryl ether sulfone) Ultrafiltration ANTI-FOULING SELF-CLEANING Titanium dioxide
原文传递
Precise modification of poly(aryl ether ketone sulfone)proton exchangemembranes with positively charged bismuth oxide clusters for high proton conduction performance 被引量:1
9
作者 Yi-Zhuo Yin Zhen-Guo Zhang +6 位作者 Wen-Wen He Jing-Mei Xu Feng-Yu Jiang Xu Han Wan-Ting Di ZheWang Shengqian Ma 《SusMat》 2022年第1期76-89,共14页
In the field of proton exchange membranes(PEMs),it is still a great challenge to explore new Nafion alternatives,maintaining the high proton conductivity and lowering the cost of practical application.In this work,a s... In the field of proton exchange membranes(PEMs),it is still a great challenge to explore new Nafion alternatives,maintaining the high proton conductivity and lowering the cost of practical application.In this work,a series of low sulfonated poly(aryl ether ketone sulfone)(SPAEKS)membranes hybridized by[Bi_(6)O_(5)(OH)_(3)]_(2)(NO_(3))10⋅6H_(2)O(H_(6)Bi_(12)O_(16))have been successfully fabricated.When the doping amount of H6Bi12O16 reaches 5 wt%,the DS15-Bi12-5 showing the best proton conductive ability and mechanical properties.The proton conductivity can achieve 72.8 mS⋅cm−1 at 80℃ and the tensile strength can reach 43.57 MPa.Confirmed by experimental data and activation energy(Ea)calculations,the existence of Bi cluster makes more hydrogen bonds,providing additional proton hopping sites and offers more proton transport vehicles,leading to a high proton conduction performance.This work proved that polyoxometalates(POMs)can replace the role of sulfonate groups in SPAEKS to a certain extent and work out the defects of high sulfonation,making a remarkable contribution to the practical application of low sulfonated SPAEKS. 展开更多
关键词 polyOXOMETALATES proton conductivity proton exchange membrane sulfonated poly(aryl ether ketone sulfone)
原文传递
含醚键双二氮杂萘酮结构聚芳醚腈砜的合成与性能
10
作者 张振东 刘程 +4 位作者 安晓亮 陈曦 顾宏剑 赵文淇 蹇锡高 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2024年第1期1-7,共7页
文中以含醚键双二氮杂萘酮结构化合物4,4’-双(氧基(1,4-苯撑))-双二氮杂萘-1(2H)酮-二苯醚(OBDHPZ)为类双酚单体,与4,4’-二氟二苯砜(DFS)和2,6’-二氟苯腈(DFBN)进行高温溶液缩聚反应,通过调节聚合物分子主链中砜基和氰基等的含量,合... 文中以含醚键双二氮杂萘酮结构化合物4,4’-双(氧基(1,4-苯撑))-双二氮杂萘-1(2H)酮-二苯醚(OBDHPZ)为类双酚单体,与4,4’-二氟二苯砜(DFS)和2,6’-二氟苯腈(DFBN)进行高温溶液缩聚反应,通过调节聚合物分子主链中砜基和氰基等的含量,合成了一系列不同腈砜比的含醚键双二氮杂萘酮联苯结构聚芳醚腈砜树脂(PBPENS),其N-甲基吡咯烷酮(NMP)溶液在25℃的特性黏度为0.63~0.90 dL/g。通过红外光谱、核磁共振氢谱和广角X射线衍射仪表征了所合成聚芳醚腈砜的结构;通过差示扫描量热仪和热失重分析仪分析了该类聚芳醚腈砜的热性能,聚合物的玻璃化转变温度(Tg)在322~325℃,5%热失重温度(Td5%)在485~500℃。该类聚合物在常温时可溶解于NMP、N,N-二甲基乙酰胺(DMAc)、氯仿等极性非质子有机溶剂;采用溶液浇筑法制备了含醚键双二氮杂萘酮结构聚芳醚腈砜薄膜,薄膜的拉伸强度可以达到56~65 MPa。 展开更多
关键词 双二氮杂萘酮 聚芳醚腈砜 合成 耐热性 溶解性
下载PDF
High performance photodegradation resistant PVA@TiO_(2)/carboxyl-PES self-healing reactive ultrafiltration membrane
11
作者 Yu Liang Yuanfang Fan +5 位作者 Zhongmin Su Mingxin Huo Xia Yang Hongliang Huo Chi Wang Zhi Geng 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第2期31-39,共9页
The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Never... The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes. 展开更多
关键词 Ultrafiltration membrane SELF-CLEANING SELF-HEALING poly(aryl ether sulfone)
下载PDF
磺化聚苯乙烯/侧链交联型磺化聚芳醚酮砜复合质子交换膜的制备与性能
12
作者 程海龙 韩康辉 +3 位作者 李奥 陶璐静 易飞扬 孙娇娇 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2024年第8期129-139,共11页
如何平衡质子交换膜(PEM)的吸水性与尺寸稳定性及质子传导与甲醇渗透之间的关系一直是PEM材料的研究热点.本文通过直接缩聚法合成了含有丙烯基的聚芳醚酮砜共聚物(PAEKS),利用自由基接枝反应将磺化聚苯乙烯(SPS)和苯乙烯磺酸钠通过丙烯... 如何平衡质子交换膜(PEM)的吸水性与尺寸稳定性及质子传导与甲醇渗透之间的关系一直是PEM材料的研究热点.本文通过直接缩聚法合成了含有丙烯基的聚芳醚酮砜共聚物(PAEKS),利用自由基接枝反应将磺化聚苯乙烯(SPS)和苯乙烯磺酸钠通过丙烯基引入到PAEKS中,制备了一系列磺化聚苯乙烯/侧链交联型磺化聚芳醚酮砜交联复合膜cr-SPAEKS-x(其中x代表复合膜中磺酸基团的含量),利用核磁共振波谱及红外光谱对其进行了表征.由扫描电子显微镜照片可见,SPS和苯乙烯磺酸钠在交联复合膜中分布非常均匀,没有发生任何分相现象.交联网络结构的形成提高了膜的热稳定性、氧化稳定性及力学性能.同时其独特的亲/疏水相分离结构和交联网络结构也有效提高了交联复合膜的尺寸稳定性和阻醇性能,80℃时磺酸基团含量最高的cr-SPAEKS-120%膜在高达63.5%的吸水率下溶胀率仅为20.1%,甲醇渗透系数最高为3.47×10^(-7) cm^(2)/s,远低于Nafion117的23.80×10^(-7) cm^(2)/s.独特的链结构形成的亲/疏水相分离结构使得该系列膜具有较好的质子传导性能,cr-SPAEKS-120%膜在20和80℃下的质子传导率分别达到0.043和0.113 S/cm,可见该系列交联复合膜在直接甲醇燃料电池中具有良好的应用前景. 展开更多
关键词 磺化聚苯乙烯 侧链交联型磺化聚芳醚酮砜 尺寸稳定性 阻醇性能 交联复合质子交换膜
下载PDF
磺化聚乙烯醇/侧链磺化聚芳醚酮交联复合膜的制备与性能
13
作者 程海龙 韩康辉 +5 位作者 孙娇娇 郑锐 李奥 栾立伟 管丹丹 陶璐静 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2024年第4期147-156,共10页
通过溶液共混热处理方法,制备了磺化聚乙烯醇(SPVA)含量不同的SPVA/侧链磺化聚芳醚酮交联复合膜(Cr-SSPxx)。交联网络结构有效增强了交联复合膜的力学性能、热稳定性、氧化稳定性及尺寸稳定性,扫描电镜显示,交联复合膜呈现了更好的相容... 通过溶液共混热处理方法,制备了磺化聚乙烯醇(SPVA)含量不同的SPVA/侧链磺化聚芳醚酮交联复合膜(Cr-SSPxx)。交联网络结构有效增强了交联复合膜的力学性能、热稳定性、氧化稳定性及尺寸稳定性,扫描电镜显示,交联复合膜呈现了更好的相容性和均一性。随交联度增加,交联复合膜的溶胀率呈现明显下降趋势,在25℃和80℃时,Cr-SSP30膜的溶胀率分别仅有3.7%和7.6%。由于SPVA对醇有阻碍作用,以及交联网络结构增加了膜的致密性,故该系列Cr-SSPxx膜展现出非常优秀的阻醇性能,交联复合膜的甲醇渗透率明显低于纯S-SPAEK膜和磺化聚乙烯醇/侧链型磺化聚芳醚酮复合膜,Cr-SSP30膜的甲醇渗透率仅为9.4×10^(-8) cm^(2)/s。虽然与磺化聚乙烯醇/侧链型磺化聚芳醚酮复合膜相比,交联复合膜的质子传导率有所降低,但由于独特的侧链磺化结构能够促进质子传导,质子传导率最低的Cr-SSP30膜的传导率在25℃和80℃时也都分别达到了0.034 S/cm和0.065 S/cm,同时表现出了更高的质子选择性,能够满足直接甲醇燃料电池(DMFC)的使用要求,有望在DMFC中得到应用。 展开更多
关键词 侧链型磺化聚芳醚酮 磺化聚乙烯醇 交联复合质子交换膜
下载PDF
Preparation and Properties of Hybrid Silane-crosslinked Sulfonated Poly(aryl ether ketone)s as Proton Exchange Membranes
14
作者 LIU Zhenchao WANG Peng +1 位作者 HU Wei LIU Baijun 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 2019年第5期937-944,共8页
A series of novel organic-inorganic hybrid proton-conducting electrolyte membranes with silane-crosslinked sulfonated poly(aryl ether ketone)(SC-SPAEK) networks was prepared via a simple procedure that includes soluti... A series of novel organic-inorganic hybrid proton-conducting electrolyte membranes with silane-crosslinked sulfonated poly(aryl ether ketone)(SC-SPAEK) networks was prepared via a simple procedure that includes solution casting and acid treatment. The organosilicon pendants of the silane-grafted SPAEK, which were expected to serve as coupling and crosslinking agents, were found to play a key role in the homogenous dispersion of inorganic particles and improved the performance of hybrid membranes. The hybrid membranes exhibited enhanced proton conductivity, and SC-SPAEK/TiO2-4 showed an extremely high proton conductivity of 0.1472 S/cm at 100℃. The crosslinked hybrid membranes also demonstrated good chemical resistance, oxidative stability, and mechanical properties. The crosslinked hybrid membranes with excellent comprehensive performance may be a promising material for proton exchange membrane fuel cells. 展开更多
关键词 Proton-conducting electrolyte membrane sulfonATED poly(aryl ether ketones) CROSS-LINKED network HYBRID
原文传递
含烯丙基杂萘联苯聚芳醚砜酮的合成
15
作者 柳承德 潘亮 +1 位作者 刘程 蹇锡高 《合成树脂及塑料》 CAS 北大核心 2023年第4期1-5,共5页
以4-(4-羟基苯基)-2,3-二氮杂萘-1-酮、2,2′-二烯丙基双酚A(DABPA)、4,4′-二氟二苯砜及4,4′-二氟二苯酮为单体,通过溶液缩聚法合成一系列烯丙基功能化杂萘联苯聚芳醚砜酮(APPBAESK),探讨了溶剂、单体配比对APPBAESK相对分子质量、溶... 以4-(4-羟基苯基)-2,3-二氮杂萘-1-酮、2,2′-二烯丙基双酚A(DABPA)、4,4′-二氟二苯砜及4,4′-二氟二苯酮为单体,通过溶液缩聚法合成一系列烯丙基功能化杂萘联苯聚芳醚砜酮(APPBAESK),探讨了溶剂、单体配比对APPBAESK相对分子质量、溶解性、结晶性能及热性能的影响。结果表明:APPBAESK的相对分子质量随DABPA单体用量的增加而降低,呈现无定形结构,玻璃化转变温度在200℃左右,N2氛围下质量损失5%时的温度在450℃以上,具有较好耐热性,同时实现了烯丙基功能化。 展开更多
关键词 聚芳醚砜酮 烯丙基 杂萘联苯 热性能
下载PDF
联苯基双二氮杂萘酮共聚芳醚砜酮合成与性能
16
作者 陈曦 刘程 +3 位作者 顾宏剑 刘乾 张守海 蹇锡高 《工程塑料应用》 CAS CSCD 北大核心 2023年第6期1-8,共8页
以4,4′-二苯基联二氮杂萘酮(DBD),4-(4-羟基苯基)-2,3-二氮杂萘-1-酮(DHPZ),4,4′-二氟二苯酮(DFK),4,4′-二氟二苯砜(DFS)为单体,进行高温溶液缩聚反应,DBD与DHPZ两种类双酚单体的物质的量比为8∶2,通过调节DFK与DFS的配比,合成了一... 以4,4′-二苯基联二氮杂萘酮(DBD),4-(4-羟基苯基)-2,3-二氮杂萘-1-酮(DHPZ),4,4′-二氟二苯酮(DFK),4,4′-二氟二苯砜(DFS)为单体,进行高温溶液缩聚反应,DBD与DHPZ两种类双酚单体的物质的量比为8∶2,通过调节DFK与DFS的配比,合成了一系列含联苯基双二氮杂萘酮联苯结构共聚芳醚砜酮(PPDESKs)树脂。采用核磁共振氢谱、傅里叶变换红外光谱和广角X射线衍射等表征了PPDESKs的分子结构,并通过差示扫描量热仪和热重分析仪研究了该系列PPDESKs的热性能。结果表明,PPDESKs的玻璃化转变温度(Tg)为322~362℃,随砜基含量的提高而升高,氮气气氛下的初始分解温度为443~468℃,5%热失重温度最高可达505℃。对PPDESKs进行溶解性能测试,发现其可溶解在四氯乙烷和N-甲基吡咯烷酮强极性非质子有机溶剂中。采用溶液浇铸法制膜,并测试了聚合物薄膜的拉伸性能,聚合物薄膜的拉伸弹性模量为0.90~1.47 GPa,随砜基含量增加而增加;拉伸强度为72~82 MPa,断裂伸长率为8.39%~18.92%,且随着酮羰基含量的增加而增大。 展开更多
关键词 联苯基双二氮杂萘酮 聚芳醚砜酮 溶液缩聚 热性能 溶解性能 拉伸性能
下载PDF
SYNTHESIS AND PROPERTIES OF SULFONATED POLY(ETHER KETONE)S CONTAINING 3,5-DIMETHYL PHTHALAZINONE MOIETIES AS PROTON EXCHANGE MEMBRANE MATERIALS 被引量:3
17
作者 蹇锡高 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2012年第4期511-519,共9页
Sulfonated poly(ether ketone)s containing 3,5-dimethyl phthalazinone moieties (SPPEK-DMs) with different degrees of sulfonation (DS) were synthesized via direct polycondensation from 4-(3,5-dimethyl-4-hydroxyph... Sulfonated poly(ether ketone)s containing 3,5-dimethyl phthalazinone moieties (SPPEK-DMs) with different degrees of sulfonation (DS) were synthesized via direct polycondensation from 4-(3,5-dimethyl-4-hydroxyphenyl)-2,3- phthalazinone, 4,4'-difluorobenzophenone and 3,3'-disulfonate-4,4'-difluorobenzophenone. The chemical structure of SPPEK-DMs was characterized by FTIR and 1H-NMR. Thermal stability of SPPEK-DMs was characterized by the thermogravimetric analysis. The membranes prepared from SPPEK-DMs exhibited ion exchange capacities (IEC) ranging from 0.93 mmol.g-1 to 1.86 mmol.g-1. Water uptake, swelling, oxidative stability and methanol permeability of SPPEK- DMs membranes were investigated. SPPEK-DMs membranes exhibited high oxidative stability. The methanol permeability values of SPPEK-DMs membranes were in the range 5.15× 10^-8-6.61×10^-7 cm^2.s-1, which was much lower than those of Nafion117. The proton conductivity of SPPEK-DM40 membranes was 1.1 ×10^-2 S.cm^-1 at 70℃. 展开更多
关键词 PHTHALAZINONE sulfonated poly(aryl ether ketone) Proton exchange membrane.
原文传递
磺化聚芳醚酮砜/ZrO2复合型质子交换膜的制备与性能 被引量:7
18
作者 王哲 高洪成 +3 位作者 赵成吉 常虹 张会轩 那辉 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2011年第8期1884-1888,共5页
通过溶胶-凝胶法制备了纳米ZrO2无机粒子,再通过溶胶共混法制备了不同ZrO2含量的磺化聚芳醚酮砜(SPAEKS)复合膜.红外光谱显示复合膜中存在Zr—O—Zr吸收峰.扫描电镜照片显示纳米ZrO2无机粒子能够均匀地分散在SPAEKS聚合物基体中,未发生... 通过溶胶-凝胶法制备了纳米ZrO2无机粒子,再通过溶胶共混法制备了不同ZrO2含量的磺化聚芳醚酮砜(SPAEKS)复合膜.红外光谱显示复合膜中存在Zr—O—Zr吸收峰.扫描电镜照片显示纳米ZrO2无机粒子能够均匀地分散在SPAEKS聚合物基体中,未发生团聚现象.通过对复合膜的性能测试发现,纳米ZrO2无机粒子的引入提高了复合膜的热稳定性、吸水率和质子传导率.在80℃时,SPAEKS/ZrO2-10%(质量分数)复合膜的甲醇渗透系数为5.6×10-7 cm2/s,低于SPAEKS膜的甲醇渗透系数(6.7×10-7 cm2/s).同时,复合膜在80℃时的质子传导率都在0.08 S/cm以上. 展开更多
关键词 磺化聚芳醚酮砜 质子传导率 氧化锆 复合膜 质子交换膜燃料电池
下载PDF
侧链含有全氟磺酸的聚芳醚砜质子交换膜材料的制备及性能 被引量:6
19
作者 王永鹏 岳喜贵 +4 位作者 庞金辉 李雪峰 李娜 张海博 姜振华 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2012年第5期1100-1105,共6页
利用含溴苯侧基的聚芳醚砜(PES-Br)和1,1,2,2-四氟-2-(1,1,2,2-四氟-2-碘乙氧基)乙烷磺酸钾(PSA-K)进行Ullman偶联反应,制备了新型含全氟磺酸侧链的聚芳醚砜(PES-PSA),全氟磺酸的引入量为50%.在离子交换容量(IEC)为0.907 meq./g,80℃,... 利用含溴苯侧基的聚芳醚砜(PES-Br)和1,1,2,2-四氟-2-(1,1,2,2-四氟-2-碘乙氧基)乙烷磺酸钾(PSA-K)进行Ullman偶联反应,制备了新型含全氟磺酸侧链的聚芳醚砜(PES-PSA),全氟磺酸的引入量为50%.在离子交换容量(IEC)为0.907 meq./g,80℃,相对湿度为100%时,PES-PSA质子传导率达到0.039S/cm,表现出较高的质子传导能力.其较低的IEC值使膜材料表现出良好的热稳定性和尺寸稳定性. 展开更多
关键词 全氟磺酸 聚芳醚砜 质子交换膜
下载PDF
磺化聚芳醚酮砜的热降解动力学 被引量:6
20
作者 王哲 杨鑫 +2 位作者 吴清海 倪宏哲 周杰 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2011年第2期99-102,106,共5页
通过热重分析仪(TGA)对作为质子交换膜材料使用的磺化聚芳醚酮砜(SPAEKS)进行了热性能研究。采用不同的升温速率,分别用Kissinger方法和Flynn-Wall-Ozawa方法研究了不同磺化度的SPAEKS在氮气氛围下磺酸基团完全脱落前的热降解动力学。... 通过热重分析仪(TGA)对作为质子交换膜材料使用的磺化聚芳醚酮砜(SPAEKS)进行了热性能研究。采用不同的升温速率,分别用Kissinger方法和Flynn-Wall-Ozawa方法研究了不同磺化度的SPAEKS在氮气氛围下磺酸基团完全脱落前的热降解动力学。研究表明,通过Kissinger方法计算得到SPAEKS的活化能E、指前因子A、反应级数n、相关系数r(磺化度0.8的SPAEKS-4,E=149.16 kJ/mol,lnA=23.93,n=2.6,r=0.9887)。通过Flynn-Wall-Ozawa方法计算得到SPAEKS的平均活化能E(SPAEKS-4的活化能为140.73 kJ/mol),而且所求活化能在相同磺化度下略低于用Kissinger方法所求,但活化能都随着磺化度的增加而增大。 展开更多
关键词 磺化聚芳醚酮砜 热重分析 降解动力学 活化能
下载PDF
上一页 1 2 6 下一页 到第
使用帮助 返回顶部