Research and Discussion on Flipped Classroom Combined with Case-Based Learning in Pharmacoeconomics Teaching

Objective:To explore the application effect of flipped classroom combined with case-based learning teaching methods in pharmacoeconomics teaching.Methods:The students majoring in clinical pharmacy in 2019 were selected as the study subjects,and the cost-effectiveness analysis of different dosage forms of Yinzhihuang in the treatment of neonatal jaundice was selected as the teaching case.The flipped classroom combined with case-based learning teaching method was used to carry out theoretical teaching to the students.After the course,questionnaires were distributed through the Sojump platform to evaluate the teaching effect.Results:The results of the questionnaire showed that 85.71%of the students believed that the flipped classroom combined with case-based learning teaching method was helpful in mobilizing the learning enthusiasm and initiative,and improving the comprehensive application ability of the knowledge of pharmacoeconomics.92.86%of the students think that it is conducive to the understanding and memorization of learning content,as well as the cultivation of teamwork,communication,etc.Conclusion:Flipped classroom combined with case-based learning teaching method can improve students’knowledge mastery,thinking skills,and practical application skills,as well as optimize and improve teachers’teaching levels.

水田动力底盘逆向建模与质心验证——基于Geomagic Design X

针对目前农业机械仿真和优化模型精度不高的问题,提出了一种构建精确模型的逆向建模方法。应用光学扫描仪采集点云数据,基于Geomagic Design X处理点云数据并重构零部件模型,在SolidWorks中完成水田动力底盘的装配。以VP6D-CQ型水田动力底盘为例,将测得的实际质心位置与所建的模型质心位置进行比较,并对提出的逆向建模方法进行了试验验证以及误差分析。结果表明:总质量、x坐标、y坐标、z坐标的误差值分别为4.55%、3.62%、2.23%、4.81%,误差值均在5%内。此方法可构建准确的三维模型,为后续仿真优化数据精确性奠定了基础,与传统的研发相比较,可缩短农业机械研发周期、降低设计成本。

CASE-BASED CONCEPTUAL DESIGN

The current method of case-based design (CBD) can be well practiced forconfiguration design in which design experience knowledge is involved. However, since the designcase is confined to a certain application domain, it is difficult for CBD to be applied toconceptual design process that develops concepts to meet design specifications. Firstly, a functionfactor description space is erected to provide an exhibition room for all functions of design cases.Next, the approach for identifying the space state of function factor in description space isproposed, including the determination of the similarities between function factors of design case.And then a general object-oriented representation for design case is presented by bringing the classof function and in-out flow into the current case representation. Finally, a living example forelectro-pet design that illustrates the implementation of the method for case-based conceptualdesign based on distributed design case repositories is described.

Integration of Theory and Practice in Medical Morphology Curriculum in Postgraduate Training:A Flipped Classroom and Case-based Learning Exercise

Objective:The integration of training in theory and practice across the medical education spectrum is being encouraged to increase student understanding and skills in the sciences.This study aimed to determine the deciding factors that drive students'perceived advantages in class to improve precision education and the teaching model.Methods:A mixed strategy of an existing flipped classroom(FC)and a case-based learning(CBL)model was conducted in a medical morphology curriculum for 575 postgraduate students.The subjective learning evaluation of the individuals(learning time,engagement,study interest and concentration,and professional integration)was collected and analyzed after FC-CBL model learning.Results:The results from the general evaluation showed promising results of the medical morphology in the FC-CBL model.Students felt more engaged by instructors in person and benefited in terms of time-saving,flexible arrangements,and professional improvement.Our study contributed to the FC-CBL model in Research Design in postgraduate training in 4 categories:1)advancing a guideline of precision teaching according to individual characteristics;2)revealing whether a learning background is needed for a Research Design course to guide setting up a preliminary course;3)understanding the perceived advantages and their interfaces;and 4)barriers and/or improvement to implement the FC-CBL model in the Research Design class,such as a richer description of e-learning and hands-on practice.Conclusion:Undertaking a FC-CBL combined model could be a useful addition to pedagogy for medical morphology learning in postgraduate training.

Design System of the Two-step Gear Reducer on Case-based Reasoning

The design of the two-step gear reducer is a tedious and time-consuming process. For the purpose of improving the efficiency and intelligence of design process, case-based reasoning（CBR） technology was applied to the design of the two-step gear reducer. Firstly, the current design method for the two-step gear reducer was analyzed and the principle of CBR was described. Secondly, according to the characteristics of the reducer, three key technologies of CBR were studied and the corresponding methods were provided, which are as follows： （a） an object-oriented knowledge representation method, （b） a retrieval method combining the nearest neighbor with the induction indexing, and （c） a case adaptation algorithm combining the revision based on rule with artificial revision. Also, for the purpose of improving the credibility of case retrieval, a new method for determining the weights of characteristics and a similarity formula were presented, which is a combinatorial weighting method with the analytic hierarchy process（AHP） and roughness set theory. Lastly, according to the above analytic results, a design system of the two-step gear reducer on CBR was developed by VC＋＋, UG and Access 2003. A new method for the design of the two-step gear reducer is provided in this study. If the foregoing developed system is applied to design the two-step gear reducer, design efficiency is improved, which enables the designer to release from the tedious design process of the gear reducer so as to put more efforts on innovative design. The study result fully reflects the feasibility and validity of CBR technology in the process of the design of the mechanical parts.

Case-based retrieval approach for machining fixture design utilizingontology

In order to develop an intelligent case-based reasoning （CBR） system to reuse fixture de- sign knowledge, ontology technology was integrated in CBR system by semantic annotation of fixture design case. Domain ontology of fixture design was constructed; concepts and relations were de- fined and represented. The 2-level similarity evaluation approach of domain ontology was presented. The concept similarity of cases was calculated as the first grade case retrieval. Numerical measure- ment was the second grade case retrieval, which adopted various methods to calculate different types of attribute values. The problem of similarity measurement of fixture design case was resolved. Pro- totype system based on the proposed method was illustrated and the retrieval approach was proved to be efficient.

A case-based reasoning method of recognizing liquefaction pits induced by 2021 M_(W) 7.3 Madoi earthquake

Earthquake-triggered liquefaction deformation could lead to severe infrastructure damage and associated casualties and property damage.At present,there are few studies on the rapid extraction of liquefaction pits based on high-resolution satellite images.Therefore,we provide a framework for extracting liquefaction pits based on a case-based reasoning method.Furthermore,five covariates selection methods were used to filter the 11 covariates that were generated from high-resolution satellite images and digital elevation models(DEM).The proposed method was trained with 450 typical samples which were collected based on visual interpretation,then used the trained case-based reasoning method to identify the liquefaction pits in the whole study area.The performance of the proposed methods was evaluated from three aspects,the prediction accuracies of liquefaction pits based on the validation samples by kappa index,the comparison between the pre-and post-earthquake images,the rationality of spatial distribution of liquefaction pits.The final result shows the importance of covariates ranked by different methods could be different.However,the most important of covariates is consistent.When selecting five most important covariates,the value of kappa index could be about 96%.There also exist clear differences between the pre-and post-earthquake areas that were identified as liquefaction pits.The predicted spatial distribution of liquefaction is also consistent with the formation principle of liquefaction.

以色彩为媒介的Design Thinking在艺术设计中的创新实践

色彩作为Design Thinking中的重要媒介,在艺术设计创新实践中具有重要潜力。本文探讨了以色彩为媒介的Design Thinking在艺术设计创新实践中的应用。色彩不仅在Design Thinking中占据重要地位,而且对人类的情绪和行为产生影响,同时在设计中起着至关重要的作用。将Design Thinking引入艺术实践领域,旨在培养艺术创新思维和问题解决能力,强调创新实践和跨学科合作。职业院校在艺术设计创新实践中面临着诸多挑战,但也存在机遇。通过案例分析,本文展示了如何实施基于色彩的Design Thinking艺术设计实践以及这种创新对艺术创新能力的积极影响。

Study on Case-Based Fixture Design

Fixture is an important manufacturing activity. A fixture design system based on case-based reasoning (CBR) is proposed in this paper. A new method of case representation on the basis of fixture function is presented, where the case representation is constituted of workpiece knowledge, processing feature knowledge, and fixture feature knowledge. Running the prototype system shows that the knowledge representation method, using cases, s a better way to transform and explain the design knowledge.

Case-based Agile Fixture Design

In order to realize the agility of the fixture design, such as reconfigurability, rescalability and reusability, fixture structure is function unit based decomposed from a fire new point of view. Which makes it easy for agile fixture to be reconfigured and modified. Thereby, the base of case based agile fixture design system info is established.Whole case based agile fixture design model is presented. In which, three modules are added relative to the other models, including case matching of fixture planning module, conflict arbitration module and agile fixture case modify module. The three modules could solve the previous problem that the experience and result are difficult to be reused in the process of design.Two key techniques in the process of the agile fixture design, the evaluation of case similarity, and restriction based conflict arbitration, are listed. And some methods are presented to evaluate the similarity and clear up the conflict.

基于“Design Thinking”理念的职业院校创新创业人才培养模式

随着我国经济不断发展和社会进步,创新创业已经成为推动经济增长的关键驱动力,在2015年全国人民代表大会上,李克强总理将“大众创业、万众创新”明确列为我国经济增长的“双引擎”之一,彰显了创新创业对于推动社会发展的重要地位。为响应国家政策,各高校积极开展创新创业教育,将其纳入高等教育综合改革的重要议程,成为培养未来人才的重要途径。本文分析了“Design Thinking”理念下职业院校创新创业人才培养的必要性,围绕新时期专业院校创新创业人才培养的要求,提出了基于“Design Thinking”理念的职业院校创新创业人才培养模式的有效策略,为职业院校人才培养效率的强化提供了参考性意见。

Case-based intelligent computer aided design system of welding machinery

The procedure during complex system plan design of welding position-locating machine is studied in this paper. The main difficulties in designing welding position-locating machine utilizing computer are discussed as well. A method of case-based intelligent CAD system for welding position-locating machine ( WMICAD) is put forward through wide research on design methodology. Object-oriented programming method is also applied to Ms system. The basic idea and realizing method are described.

基于Cast Designer的壳体铸件铸造工艺设计及智能优化

使用Cast Designer铸造仿真分析软件,通过可铸性评估系统DFM,完成浇冒系统的辅助设计,然后使用DOE技术和基于遗传算法GA的智能优化技术,评估不同工艺设计方案与铸造过程参数对壳体铸件质量的影响,分析在不同的冒口、冷铁和浇注温度条件下得料率和缩孔量的关系。根据对DOE模拟结果的分析,发现顶冒口和侧冒口尺寸是影响得料率和缩孔量的关键因数,再利用遗传算法GA选择最佳设计方案和参数。通过帕累托曲线得到了生产壳体铸件的最优工艺方案。

Web Layout Design of Large Cavity Structures Based on Topology Optimization

Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas become a focal point for contemporary researchers. Therefore, this paper aims to investigate the topologyoptimization of large cavity structures as a means to enhance their performance, safety, and efficiency. By usingthe variable density method, lightweight design is achieved without compromising structural strength. Theoptimization model considers both concentrated and distributed loads, and utilizes techniques like sensitivityfiltering and projection to obtain a robust optimized configuration. The mechanical properties are checked bycomparing the stress distribution and displacement of the unoptimized and optimized structures under the sameload. The results confirm that the optimized structures exhibit improved mechanical properties, thus offering keyinsights for engineering lightweight, high-strength large cavity structures.

A Comparative Study of Metaheuristic Optimization Algorithms for Solving Real-World Engineering Design Problems

Real-world engineering design problems with complex objective functions under some constraints are relatively difficult problems to solve.Such design problems are widely experienced in many engineering fields,such as industry,automotive,construction,machinery,and interdisciplinary research.However,there are established optimization techniques that have shown effectiveness in addressing these types of issues.This research paper gives a comparative study of the implementation of seventeen new metaheuristic methods in order to optimize twelve distinct engineering design issues.The algorithms used in the study are listed as:transient search optimization(TSO),equilibrium optimizer(EO),grey wolf optimizer(GWO),moth-flame optimization(MFO),whale optimization algorithm(WOA),slimemould algorithm(SMA),harris hawks optimization(HHO),chimp optimization algorithm(COA),coot optimization algorithm(COOT),multi-verse optimization(MVO),arithmetic optimization algorithm(AOA),aquila optimizer(AO),sine cosine algorithm(SCA),smell agent optimization(SAO),and seagull optimization algorithm(SOA),pelican optimization algorithm(POA),and coati optimization algorithm(CA).As far as we know,there is no comparative analysis of recent and popular methods against the concrete conditions of real-world engineering problems.Hence,a remarkable research guideline is presented in the study for researchersworking in the fields of engineering and artificial intelligence,especiallywhen applying the optimization methods that have emerged recently.Future research can rely on this work for a literature search on comparisons of metaheuristic optimization methods in real-world problems under similar conditions.

Combining Deep Learning with Knowledge Graph for Design Knowledge Acquisition in Conceptual Product Design

The acquisition of valuable design knowledge from massive fragmentary data is challenging for designers in conceptual product design.This study proposes a novel method for acquiring design knowledge by combining deep learning with knowledge graph.Specifically,the design knowledge acquisition method utilises the knowledge extraction model to extract design-related entities and relations from fragmentary data,and further constructs the knowledge graph to support design knowledge acquisition for conceptual product design.Moreover,the knowledge extraction model introduces ALBERT to solve memory limitation and communication overhead in the entity extraction module,and uses multi-granularity information to overcome segmentation errors and polysemy ambiguity in the relation extraction module.Experimental comparison verified the effectiveness and accuracy of the proposed knowledge extraction model.The case study demonstrated the feasibility of the knowledge graph construction with real fragmentary porcelain data and showed the capability to provide designers with interconnected and visualised design knowledge.

基于Design-Expert的电链锯锯齿结构参数优化

为提高电链锯的锯切效率,对电链锯锯齿的齿形结构参数进行研究,以单位锯切功为电链锯锯切效率的衡量指标,通过对电链锯锯切过程的仿真研究,得出不同结构锯齿的单位锯切功。以电链锯锯齿中的外形前角、侧刃楔角和顶刃楔角等结构参数作为影响因子,采用Box-Benhnken中心组合试验方法设计多因素正交试验,使用Design-expert软件进行数据分析得出最优齿形结构参数组合。研究结果表明,所选取的齿形结构参数对单位锯切功影响程度由大到小顺序依次为外形前角、侧刃楔角、顶刃楔角,并获得最优齿形结构参数组合,外形前角为10.92°、侧刃楔角为45.7°、顶刃楔角为45.41°。

荷兰代尔夫特理工大学Urban Design工作坊教学模式对我国城市设计课程教学的启示

荷兰代尔夫特理工大学的Urban Design工作坊小组教学模式,为我国城市设计教育提供了创新路径。该模式强化学生跨学科思维与问题解决能力,通过项目实践培育评审、模拟、谈判、决策及冲突管理等技能,教师角色转变为引导者和促进者,激励创新并深化团队协作与沟通。针对我国城市设计教育现状,建议加强综合能力的培养,促进理论教学与设计实践的深度结合,并构建均衡的课程评估框架。此模式的本土化将有力推动我国城市设计教育的创新与发展。

基于Smart Design的校园光伏电站仿真研究

基于智能光伏设计软件Smart Design,对株洲市某高校图书馆屋顶的工商业光伏电站进行了设计与仿真。通过评估当地太阳能资源和气象参数,确定了光伏电站的最佳选址和倾角。利用软件的3D建模和电气设计功能,完成了光伏板排布和电气连接,采用隆基绿能双面光伏组件和华为光伏优化器及逆变器,提高了电站效率。仿真结果显示,该电站具有良好的发电量、经济效益和社会贡献。

Design Principles and Mechanistic Understandings of Non-Noble-Metal Bifunctional Electrocatalysts for Zinc-Air Batteries

Zinc-air batteries(ZABs)are promising energy storage systems because of high theoretical energy density,safety,low cost,and abundance of zinc.However,the slow multi-step reaction of oxygen and heavy reliance on noble-metal catalysts hinder the practical applications of ZABs.Therefore,feasible and advanced non-noble-metal elec-trocatalysts for air cathodes need to be identified to promote the oxygen catalytic reaction.In this review,we initially introduced the advancement of ZABs in the past two decades and provided an overview of key developments in this field.Then,we discussed the work-ing mechanism and the design of bifunctional electrocatalysts from the perspective of morphology design,crystal structure tuning,interface strategy,and atomic engineering.We also included theoretical studies,machine learning,and advanced characterization technologies to provide a comprehensive understanding of the structure-performance relationship of electrocatalysts and the reaction pathways of the oxygen redox reactions.Finally,we discussed the challenges and prospects related to designing advanced non-noble-metal bifunctional electrocatalysts for ZABs.