An extended social force model on unidirectional flow considering psychological and behavioral impacts of hazard source

An accurate assessment of the evacuation efficiency in case of disasters is of vital importance to the safety design of buildings and street blocks.Hazard sources not only physically but psychologically affect the pedestrians,which may further alter their behavioral patterns.This effect is especially significant in narrow spaces,such as corridors and alleys.This study aims to integrate a non-spreading hazard source into the social force model following the results from a previous experiment and simulation,and to simulate unidirectional pedestrian flows over various crowd densities and clarity–intensity properties of the hazard source.The integration include a virtual repulsion force from the hazard source and a decay on the social force term.The simulations reveal(i)that the hazard source creates virtual bottlenecks that suppress the flow,(ii)that the inter-pedestrian push forms a stabilisation phase on the flow-density curve within medium-to-high densities,and(iii)that the pedestrians are prone to a less orderly and stable pattern of movement in low clarity–intensity scenarios,possibly with lateral collisions passing the hazard source.

Investigation of Maxima Assumptions in Modelling Tropical Cyclone- Induced Hazards in the South China Sea

The present study aims to examine the suitability of two commonly used assumptions that simplify modelling metoceanconditions for designing offshore wind turbines in the South China Sea (SCS). The first assumption assumes thatjoint N-year extreme wind and wave events can be independently estimated and subsequently combined. The secondone assumes peak wind and waves can be modelled as occurring simultaneously during a tropical cyclone (TC) event.To better understand the potential TC activity, a set of 10000 years synthetic TC events are generated. The wind fieldmodel and the Mike 21 spectral wave model are employed to model the TC-induced hazards. Subsequently, theeffect of the assumptions is evaluated by analyzing the peak structural response of both monopile and semisubmersibleoffshore wind turbines during TC events. The results demonstrate that the examined assumptions are generally accurate.By assessing the implications of these assumptions, valuable insights are obtained, which can inform andimprove the modelling of TC-induced hazards in the SCS region.

Application of Hazard Vulnerability Analysis Based on Kaiser Model in Neonatal Breast Milk Management

Objective:To analyze the existing risks in breast milk management at the neonatal department and provide corresponding countermeasures.Methods:22 risk events were identified in 7 risk links in the process of bottle-feeding of breast milk.Hazard Vulnerability Analysis based on the Kaiser model was applied to investigate and evaluate the risk events.Results:High-risk events include breast milk quality inspection,hand hygiene during collection,disinfection of collectors,cold chain management,hand hygiene during the reception,breast milk closed-loop management,and post-collection disposal.Root cause analysis of high-risk events was conducted and breast milk management strategies outside the hospital and within the neonatal department were proposed.Conclusion:Hazard Vulnerability Analysis based on the Kaiser model can identify and assess neonatal breast milk management risks effectively,which helps improve the management of neonatal breast milk.It is conducive to the safe development and promotion of bottle feeding of breast milk for neonates,ensuring the quality of medical services and the safety of children.

Application of logistic regression model for hazard assessment of landslides caused by the 2012 Yiliang Ms 5.7 earthquake in Yunnan Province,China

Accurate assessment of seismic landslides hazard is a prerequisite and foundation for postdisaster relief of earthquakes.An Ms 5.7 earthquake occurring on September 7,2012,in Yiliang County,Yunnan Province,China,triggered hundreds of landslides.To explore the characteristics of coseismic landslides caused by this moderate-strong earthquake and their significance in predicting seismic landslides regionally,this study uses an artificial visual interpretation method based on a planet image with 5-m resolution to obtain the information of the coseismic landslides and establishes a coseismic landslide database containing data on 232 landslides.Nine influencing factors of landslides were selected for this study:elevation,relative elevation,slope angle,aspect,slope position,distance to river system,distance to faults,strata,and peak ground acceleration.The real probability of coseismic landslide occurrence is calculated by combining the Bayesian probability and logistic regression model.Based on the coseismic landslides,the probabilities of landslide occurrence under different peak ground acceleration are predicted using a logistic regression model.Finally,the model established in this paper is used to calculate the landslide probability of the Ludian Ms 6.5 earthquake that occurred in August 2014,78.9 km away from the macro-epicenter of the Yiliang earthquake.The probability is verified by the real coseismic landslides of this earthquake,which confirms the reliability of the method presented in this paper.This study proves that the model established according to the seismic landslides triggered by one earthquake has a good effect on the seismic landslides hazard assessment of similar magnitude,and can provide a reference for seismic landslides prediction of moderate-strong earthquakes in this region.

An Intelligent Hazardous Waste Detection and Classification Model Using Ensemble Learning Techniques

Proper waste management models using recent technologies like computer vision,machine learning(ML),and deep learning(DL)are needed to effectively handle the massive quantity of increasing waste.Therefore,waste classification becomes a crucial topic which helps to categorize waste into hazardous or non-hazardous ones and thereby assist in the decision making of the waste management process.This study concentrates on the design of hazardous waste detection and classification using ensemble learning(HWDC-EL)technique to reduce toxicity and improve human health.The goal of the HWDC-EL technique is to detect the multiple classes of wastes,particularly hazardous and non-hazardous wastes.The HWDC-EL technique involves the ensemble of three feature extractors using Model Averaging technique namely discrete local binary patterns(DLBP),EfficientNet,and DenseNet121.In addition,the flower pollination algorithm(FPA)based hyperparameter optimizers are used to optimally adjust the parameters involved in the EfficientNet and DenseNet121 models.Moreover,a weighted voting-based ensemble classifier is derived using three machine learning algorithms namely support vector machine(SVM),extreme learning machine(ELM),and gradient boosting tree(GBT).The performance of the HWDC-EL technique is tested using a benchmark Garbage dataset and it obtains a maximum accuracy of 98.85%.

Individual and Systemic Factors of Under-five Mortality in Nigeria:A Cox Proportional Hazard Model

Despite considerable efforts to reduce under-five mortality nationwide,Nigeria has fallen short of achieving the Millennium Development Goals(MDGs)target of 67 deaths per 1,000 live births by 2015.Of all the documented factors of under-five mortality,little evidence exists on the impact of systemic barriers and individual factors(maternal health-seeking behaviour)on under-five mortality in Nigeria.The study used a nationally representative sample from Nigeria Demographic and Health Survey(NDHS)2013 dataset.The target population was 20,192 women aged 15-59 years who had given birth to 31,480 children five years before the survey.Stata software was used for data analysis.The risk of death was estimated using Cox proportional hazard models and results are presented as hazards ratios(HR)with 95%confidence intervals(CI).Findings from the overall Model I-IV revealed individual factors(maternal health-seeking indicators)as significant factors of under-five deaths(p<0.05).Children whose mothers received antenatal care coverage(ANC)outside health care facilities(HCF)(HR:1.60,CI:1.0-2.4,p<0.05);or delivered outside HCF(HR:1.02,CI:0.7-1.5,p<0.05)had elevated hazard risk of death before age five.Conversely,children who were presented for postnatal check within two weeks of delivery(HR:0.60,CI:0.5-0.8,p<0.05),or delivered within the longer birth interval(HR:0.67,CI:0.6-0.8,p<0.001)had significantly lower hazard risk of death before age five.As part of systemic factors,children whose mothers were covered by health insurance scheme had significantly(HR:0.52,CI:0.2-1.2,p<0.001)lower risk of death when compared with their counterparts without health insurance coverage.The study emphasized the need to revitalize strategies and programs to improve women health seeking behaviour and investment in the health sector through health insurance,infrastructure,and supplies.

Exploring mechanism of hidden,steep obliquely inclined bedding landslides using a 3DEC model:A case study of the Shanyang landslide in Shaanxi Province,China

Catastrophic geological disasters frequently occur on slopes with obliquely inclined bedding structures(also referred to as obliquely inclined bedding slopes),where the apparent dip sliding is not readily visible.This phenomenon has become a focal point in landslide research.Yet,there is a lack of studies on the failure modes and mechanisms of hidden,steep obliquely inclined bedding slopes.This study investigated the Shanyang landslide in Shaanxi Province,China.Using field investigations,laboratory tests of geotechnical parameters,and the 3DEC software,this study developed a numerical model of the landslide to analyze the failure process of such slopes.The findings indicate that the Shanyang landslide primarily crept along a weak interlayer under the action of gravity.The landslide,initially following a dip angle with the support of a stable inclined rock mass,shifted direction under the influence of argillization in the weak interlayer,moving towards the apparent dip angle.The slide resistance effect of the karstic dissolution zone was increasingly significant during this process,with lateral friction being the primary resistance force.A reduction in the lateral friction due to karstic dissolution made the apparent dip sliding characteristics of the Shanyang landslide more pronounced.Notably,deformations such as bending and uplift at the slope’s foot suggest that the main slide resistance shifts from lateral friction within the karstic dissolution zone to the slope foot’s resistance force,leading to the eventual buckling failure of the landslide.This study unveils a novel failure mode of apparent dip creep-buckling in the Shanyang landslide,highlighting the critical role of lateral friction from the karstic dissolution zone in its failure mechanism.These insights offer a valuable reference for mitigating risks and preventing disasters related to obliquely inclined bedding landslides.

Deformation,structure and potential hazard of a landslide based on InSAR in Banbar county,Xizang(Tibet)

The Tibetan Plateau is characterized by complex geological conditions and a relatively fragile ecological environment.In recent years,there has been continuous development and increased human activity in the Tibetan Plateau region,leading to a rising risk of landslides.The landslide in Banbar County,Xizang(Tibet),have been perturbed by ongoing disturbances from human engineering activities,making it susceptible to instability and displaying distinct features.In this study,small baseline subset synthetic aperture radar interferometry(SBAS-InSAR)technology is used to obtain the Line of Sight(LOS)deformation velocity field in the study area,and then the slope-orientation deformation field of the landslide is obtained according to the spatial geometric relationship between the satellite’s LOS direction and the landslide.Subsequently,the landslide thickness is inverted by applying the mass conservation criterion.The results show that the movement area of the landslide is about 6.57×10^(4)m^(2),and the landslide volume is about 1.45×10^(6)m^(3).The maximum estimated thickness and average thickness of the landslide are 39 m and 22 m,respectively.The thickness estimation results align with the findings from on-site investigation,indicating the applicability of this method to large-scale earth slides.The deformation rate of the landslide exhibits a notable correlation with temperature variations,with rainfall playing a supportive role in the deformation process and displaying a certain lag.Human activities exert the most substantial influence on the spatial heterogeneity of landslide deformation,leading to the direct impact of several prominent deformation areas due to human interventions.Simultaneously,utilizing the long short-term memory(LSTM)model to predict landslide displacement,and the forecast results demonstrate the effectiveness of the LSTM model in predicting landslides that are in a continuous development and movement phase.The landslide is still active,and based on the spatial heterogeneity of landslide deformation,new recommendations have been proposed for the future management of the landslide in order to mitigate potential hazards associated with landslide instability.

Reliability estimation and remaining useful lifetime prediction for bearing based on proportional hazard model

As the central component of rotating machine,the performance reliability assessment and remaining useful lifetime prediction of bearing are of crucial importance in condition-based maintenance to reduce the maintenance cost and improve the reliability.A prognostic algorithm to assess the reliability and forecast the remaining useful lifetime(RUL) of bearings was proposed,consisting of three phases.Online vibration and temperature signals of bearings in normal state were measured during the manufacturing process and the most useful time-dependent features of vibration signals were extracted based on correlation analysis(feature selection step).Time series analysis based on neural network,as an identification model,was used to predict the features of bearing vibration signals at any horizons(feature prediction step).Furthermore,according to the features,degradation factor was defined.The proportional hazard model was generated to estimate the survival function and forecast the RUL of the bearing(RUL prediction step).The positive results show that the plausibility and effectiveness of the proposed approach can facilitate bearing reliability estimation and RUL prediction.

Assessing Maize Drought Hazard for Agricultural Areas Based on the Fuzzy Gamma Model

Drought is one of the severe meteorological disasters and causes of serious losses for agricultural productions, and early assessment of drought hazard degree is critical in management of maize farming. This study proposes a novel method for assessment of maize drought hazard in different growth stages. First, the study divided the maize growth period into four critical growth stages, including seeding, elongation, tasseling, and filling. Second, maize drought causal factors were selected and the fuzzy membership function was established. Finally, the study built a fuzzy gamma model to assess maize drought hazards, and the gamma 0.93 was finally established using Monte Carlo Analysis. Performing fuzzy gamma operation with 0.93 for gamma and classifying the area yielded a map of maize drought hazards with four zones of light, moderate, severe, and extreme droughts. Using actual field collected data, seven selected samples for drought hazard degree were examined, the model output proved to be a valid tool in the assessment maize drought hazard. This model will be very useful in analyzing the spatial change of maize drought hazard and influence on yield, which is significant for drought management in major agricultural areas.

Probabilistic seismic hazard assessment of Nepal using multiple seismic source models

The potential for devastating earthquakes in the Himalayan orogeny has long been recognized. The 2015 MW7.8 Gorkha, Nepal earthquake has heightened the likelihood that major earthquakes will occur along this orogenic belt in the future. Reliable seismic hazard assessment is a critical element in development of policy for seismic hazard mitigation and risk reduction. In this study, we conduct probabilistic seismic hazard assessment using three different seismogenic source models(smoothed gridded, linear, and areal sources)based on the complicated tectonics of the study area. Two sets of ground motion prediction equations are combined in a standard logic tree by taking into account the epistemic uncertainties in hazard estimation. Long-term slip rates and paleoseismic records are also incorporated in the linear source model. Peak ground acceleration and spectral acceleration at 0.2 s and 1.0 s for 2% and 10%probabilities of exceedance in 50 years are estimated. The resulting maps show significant spatial variation in seismic hazard levels. The region of the Lesser Himalaya is found to have high seismic hazard potential. Along the Main Himalayan Thrust from east to west beneath the Main Central Thrust, large earthquakes have occurred regularly in history; hazard values in this region are found to be higher than those shown on existing hazard maps. In essence, the combination of long span earthquake catalogs and multiple seismogenic source models gives improved seismic hazard constraints in Nepal.

Regional Integrated Meteorological Forecasting and Warning Model for Geological Hazards Based on Logistic Regression

Information model is adopted to integrate factors of various geosciences to estimate the susceptibility of geological hazards. Further combining the dynamic rainfall observations, Logistic regression is used for modeling the probabilities of geological hazard occurrences, upon which hierarchical warnings for rainfall-induced geological hazards are produced. The forecasting and warning model takes numerical precipitation forecasts on grid points as its dynamic input, forecasts the probabilities of geological hazard occurrences on the same grid, and translates the results into likelihoods in the form of a 5-level hierarchy. Validation of the model with observational data for the year 2004 shows that 80% of the geological hazards of the year have been identified as ＂likely enough to release warning messages＂. The model can satisfy the requirements of an operational warning system, thus is an effective way to improve the meteorological warnings for geological hazards.

Smoke Hazard Assessment Model Based on Fire Dynamics Simulator and FED Model

Smoke is the main cause of fire death. In order to minimize the potential danger of smoke hazard, a rational VR based fire training simulator should fully consider all aspects of smoke hazard. In the simulator, the visualization of data based on FDS (Fire Dynamics Simulator) and FED fire dynamic data and volume rendering is further optimized, which can be effectively and quickly applied to virtual fire protection. In addition, a comprehensive smoke hazard assessment model based on FED and FED is established to assess the IHD value of different paths, which represents the safety of different paths, and can be used for evacuation or rescue in virtual training. Taking the case of campus fire drill as an experiment, the research shows the accuracy and effectiveness of smoke assessment based on FDS and FED model. The road force with the highest safety can be selected through the comprehensive model. So the assessment model is proved to be valuable.

Clinical Study on the Impact of Long-term Survival Quality in 204 Postoperative Patients with Breast Cancer by Cox Proportional Hazard Models

The aim of study was to evaluate clinical characteristics, social support and the association with the prognosis of breast cancer patients. A total of 204 participants were followed from 2003 until the end of 2008. Information about patients with breast cancer was submitted by investigators. Data were analyzed by Cox’s proportional hazard model. The clinical staging of breast cancer we used was the TNM classification. A 'T' score is based upon the size and/or extent of invasion. The 'N' score indicates the extent of lymph node involvement. Age at diagnose was associated with protective factors (HR=0.972;95%CI (0.834-1.130)), T staging (HR=2.075;95%CI (1.424-3.022)), N staging (HR=1.513;95%CI (1.066-2.148)), were associated with risk factor. Two survival graphs of nodes with negative effects by histology and nodes with positive effects by histology was analyzed by log-rank test, there was statistically significant relationship between two survival graphs (χ2 =136.8467, p <.0001). Age at diagnoses, Clinical stage tumor and node could contribute to the development of breast cancer and disease free survival in Chinese women.

A Cox Proportional Hazard Model Approach to Age at First Sexual Intercourse in Nigeria

Early age at first sexual intercourse comes with many negative sexual outcomes namely: having unprotected sex on first sexual intercourse, condom misuse, high rate of sexually transmitted infections (STIs), teenage pregnancy, increased number of sexual partners, etc. In this paper, we considered some socio-demographic and cultural factors and their relationship with age at first sexual intercourse so as to reduce the numerous negative sexual outcomes of early age at first sexual intercourse using the 2018 Nigerian Demographic and Health Survey data. The analysis was made using the Cox proportional hazard model and the Kaplan-Meier plot. The result shows that some respondents started having their first sexual intercourse at the age of 8 years and about 54.4% of the respondents had their first sexual intercourse before age 17 years. The median age of first sexual intercourse is 16 years which implies that about 50% of the respondents had their first sexual intercourse on or before their 16th birthday. Education, religion, region and residence significantly affects the age of first sexual intercourse while circumcision has no significant effect.

Puff Models for Simulation of Fugitive Hazardous Emissions in Atmosphere

A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ADMM (Advection Diffusion Multilayer Method) and GILTT (Generalized Integral Laplace Transform Technique) techniques. Both approaches accept wind and eddy diffusion coefficients with any restriction in their height functions. Comparisons between values predicted by the models against experimental ground-level concentrations (from Copenhagen data set) are shown. The preliminary results confirm the applicability of the approaches proposed and are promising for future work.

A Statistical Model with Non-Linear Effects and Non-Proportional Hazards for Breast Cancer Survival Analysis

The Cox proportional hazard model is being used extensively in oncology in studying the relationship between survival times and prognostic factors. The main question that needs to be addressed with respect to the applicability of the Cox PH model is whether the proportional hazard assumption is met. Failure to justify the subject assumption will lead to misleading results. In addition, identifying the correct functional form of the continuous covariates is an important aspect in the development of a Cox proportional hazard model. The purpose of this study is to develop an extended Cox regression model for breast cancer survival data which takes non-proportional hazards and non-linear effects that exist in prognostic factors into consideration. Non-proportional hazards and non-linear effects are detected using methods based on residuals. An extended Cox model with non-linear effects and time-varying effects is proposed to adjust the Cox proportional hazard model. Age and tumor size were found to have nonlinear effects. Progesterone receptor assay status and age violated the proportional hazard assumption in the Cox model. Quadratic effect of age and progesterone receptor assay status had hazard ratio that changes with time. We have introduced a statistical model to overcome the presence of the proportional hazard assumption violation for the Cox proportional hazard model for breast cancer data. The proposed extended model considers the time varying nature of the hazard ratio and non-linear effects of the covariates. Our improved Cox model gives a better insight on the hazard rates associated with the breast cancer risk factors.

Comparison of Cox proportional hazards model,Cox proportional hazards with time-varying coefficients model,and lognormal accelerated failure time model:Application in time to event analysis of melioidosis patients

Objective:To compare the prognostic factors of mortality among melioidosis patients between lognormal accelerated failure time(AFT),Cox proportional hazards(PH),and Cox PH with time-varying coefficient(TVC)models.Methods:A retrospective study was conducted from 2014 to 2019 among 453 patients who were admitted to Hospital Sultanah Bahiyah,Kedah and Hospital Tuanku Fauziah,Perlis in Northern Malaysia due to confirmed-cultured melioidosis.The prognostic factors of mortality from melioidosis were obtained from AFT survival analysis,and Cox’s models and the findings were compared by using the goodness of fit methods.The analyses were done by using Stata SE version 14.0.Results:A total of 242 patients(53.4%)survived.In this study,the median survival time of melioidosis patients was 30.0 days(95%CI 0.0-60.9).Six significant prognostic factors were identified in the Cox PH model and Cox PH-TVC model.In AFT survival analysis,a total of seven significant prognostic factors were identified.The results were found to be only a slight difference between the identified prognostic factors among the models.AFT survival showed better results compared to Cox's models,with the lowest Akaike information criteria and best fitted Cox-snell residuals.Conclusions:AFT survival analysis provides more reliable results and can be used as an alternative statistical analysis for determining the prognostic factors of mortality in melioidosis patients in certain situations.

The Cox Proportional Hazard Regression Model Vis-à-Vis ITN-Factor Impact on Mortality Due to Malaria

This study has provided a starting point for defining and working with Cox models in respect of multivariate modeling. In medical researches, there may be situations, where several risk factors potentially affect patient prognosis, howbeit, only one or two might predict patient’s predicament. In seeking to find out which of the risk factors contribute the most to the survival times of patients, there was the need for researchers to adjust the covariates to realize their impact on survival times of patients. Aside the multivariate nature of the covariates, some covariates might be categorical while others might be quantitative. Again, there might be cases where researchers need a model that has the capability of extending survival analysis methods to assessing simultaneously the effect of several risk factors on survival times. This study unveiled the Cox model as a robust technique which could accomplish the aforementioned cases. An investigation meant to evaluate the ITN-factor vis-à-vis its contribution towards death due to Malaria was exemplified with the Cox model. Data were taken from hospitals in Ghana. In doing so, we assessed hospital in-patients who reported cases of malaria (origin state) to time until death or censoring (destination stage) as a result of predictive factors (exposure to the malaria parasites) and some socioeconomic variables. We purposefully used Cox models to quantify the effect of the ITN-factor in the presence of other risk factors to obtain some measures of effect that could describe the relationship between the exposure variable and time until death adjusting for other variables. PH assumption holds for all three covariates. Sex of patient was insignificant to deaths due to malaria. Age of patient and user status were both significant. The magnitude of the coefficient (0.384) of ITN user status depicts its high contribution to the variation in the dependent variable.

GIS-based Earthquake-Triggered Landslide Hazard Zoning Using Contributing Weight Model

Earthquake-triggered landslides have aroused widespread attention because of their tremendous ability to harm people's lives and properties.The best way to avoid and mitigate their damage is to develop landslide hazard maps and make them available to the public in advance of an earthquake.Future construction can then be built according to the level of hazard and existing structures can be retrofit as necessary.During recent years various approaches have been made to develop landslide hazard maps using statistical analysis or physical models.However,these methods have limitations.This study introduces a new GIS-based approach,using the contributing weight model,to evaluate the hazard of seismically-induced landslides.In this study,the city and surrounding area of Dujiangyan was selected as the research area because of its moderate-high seismic activity.The parameters incorporated into the model that related to the probability of landslide occurrence were:slope gradient,slope aspect,geomorphology,lithology,base level,surface roughness,earthquake intensity,fault proximity,drainage proximity,and road proximity.The parameters were converted into raster data format with a resolution of 25×25m2 pixels.Analysis of the GIS correlations shows that the highest earthquake-induced landslide hazard areas are mainly in the hills and in some of the moderately steep mountainous areas of central Dujiangyan.The highest hazard zone covers an area of 11.1% of the study area,and the density distribution of seismically-induced landslides was 3.025/km2 from the 2008 Wenchuan earthquake.The moderately hazardous areas are mainly distributed within the moderately steep mountainous regions of the northern and southeastern parts of the study area and the hills of the northeastern part;covering 32.0% of the study area and with a density distribution of 2.123/km2 resulting from the Wenchuan earthquake.The lowest hazard areas are mainly distributed in the topographically flat plain in the northeastern part and some of the relatively gently slopes in the moderately steep mountainous areas of the northern part of Dujiangyan and the surrounding area.The lowest hazard areas cover 56.9% of the study area and exhibited landslide densities of 0.941/km2 and less from the Wenchuan earthquake.The quality of the hazard map was validated using a comparison with the distribution of landslides that were cataloged as occurring from the Wenchuan earthquake.43.1% of the study area consists of high and moderate hazardous zones,and these regions include 83.5% of landslides caused by the Wenchuan earthquake.The successful analysis shows that the contributing weight model can be effective for earthquake-triggered landslide hazard appraisal.The model's results can provide the basis for risk management and regional planning is.