This paper conducts a Large Eddy Simulation (LES) of Rayleigh Bénard convection in a cubic cavity based on the WMLES S-Omega subgrid-scale model. For a cubic cavity with a vertical temperature difference of 6.7...This paper conducts a Large Eddy Simulation (LES) of Rayleigh Bénard convection in a cubic cavity based on the WMLES S-Omega subgrid-scale model. For a cubic cavity with a vertical temperature difference of 6.7°C and 20°C, the velocity pulsation profiles and the mean velocity profiles of the vertical section in the middle of the cubic cavity were simulated, respectively. And they are consistent with the experiment results. Furthermore, the mean velocity field of the vertical cross-section in the middle of the cavity was calculated. Structures of the mean velocity field in the two cases are similar. A counterclockwise large vortex is found to occupy the cavity, and there are two small clockwise vortices in the lower left and upper right corners, and the mean velocity fields at two different temperature differences are consistent with the experimental results. The two-dimensional instantaneous temperature field and mean temperature field with different cross-sections in the z-direction, as well as the three-dimensional instantaneous isothermal surface structure, indicate that the large-scale circulation motion within the cubic cavity is moving diagonally. In addition, the structure of the mean streamline also illustrates this viewpoint. For the reverse vortex formed at two corners in the mean streamline structure, we used the Q criterion to identify and obtain two vortex structures similar to boomerangs. The basic turbulent structure in RB thermal convection includes the rising and falling plumes generated by buoyancy effects.展开更多
To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models...To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models were recons- tructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated by fluid dynamics with finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to different airflow distribution in the nasal cavities and variation of the main airstream passing through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than half of the overall resistance. The characteristic model of nasal cavity was extracted on the basis of characteristic points and dimensions deduced from the original models. It showed that either the geometric structure or the airflow field of the two kinds of models was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that could properly represent the original model in model studies on nasal cavity.展开更多
A three-dimensional computational fluid dynamics (CFD) model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of flu...A three-dimensional computational fluid dynamics (CFD) model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of fluid (VOF) method. Numerical simulation results can reflect the actual molten bath surface waves impinged by the supersonic oxygen jets. With increasing lance height, the cavity depth de-creases, and the cavity area, varying like a parabola, increases and then decreases. The cavity area maximizes at the lance height of 1.3 m. Under the three different lance heights simulated in this study, all of the largest impact velocities at the molten bath surface are between 50 m/s and 100 m/s.展开更多
The healing behavior of shrinkage cavity inside the cast Ti6Al4V alloy during hot isostatic pressing(HIP)was investigated experimentally by interrupted hot isostatic pressing tests.The X-ray micro computed tomography ...The healing behavior of shrinkage cavity inside the cast Ti6Al4V alloy during hot isostatic pressing(HIP)was investigated experimentally by interrupted hot isostatic pressing tests.The X-ray micro computed tomography was used to record the morphology changes before and after hot isostatic pressing.The two-dimensional geometry obtained by the microCT scan was used in simulation to study the evolution of the real shrinkage cavity during hot isostatic pressing.Shrinkage cavities,shrinkage porosity and small gas pores can be effectively eliminated under proper HIP conditions.The two-dimensional morphology in the simulation results agrees well with the experimental results.This study reveals that plastic deformation,creep and diffusion are the main mechanisms of cavity closure during hot isostatic pressing.In addition,the simplified elliptical pores with aspect ratios at different positions were used to replace the real pores to further study the factors affecting the position of dimples after HIP by simulation.It is found that the position of the dimples mainly depends on the aspect ratio of the elliptical pore and the distance between the pore surface and the external surface of the geometric model.展开更多
In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbul...In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbulence structure is described using the shear-stress transport k-ω(SST k-ω) model, and the volume of fluid(VOF) method is used to track the complex air-liquid interface. The motion of spheres during water entry is simulated using an independent overset grid. The numerical model is verified by comparing the cavity evolution results from simulations and experiments. Numerical results reveal that the time interval between the twin water entries evidently affects cavity expansion and contraction behaviors in the radial direction. However, this influence is significantly weakened by increasing the lateral distance between the two spheres. In synchronous water entries, pressure is reduced on the midline of two cavities during surface closure, which is directly related to the cavity volume. The evolution of vortexes inside the two cavities is analyzed using a velocity vector field, which is affected by the lateral distance and time interval of water entries.展开更多
The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for num...The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for numerically simulating and analyzing the unsteady flow and aerodynamic noise in an expansion chamber under the influence of airflow.A fluid simulation model is established,utilizing the Large Eddy Simulation(LES)method to calculate the unsteady flow within the expansion chamber.The simulation results effectively capture the development and changes of the unsteady flow and vorticity inside the cavity,exhibiting a high level of consistency with experimental observations.To calculate the aerodynamic noise sources within the cavity,the flow field results are integrated using the method of integral interpolation and inserted into the acoustic grid.The acoustic analogy method is then employed to determine the aerodynamic noise sources.An acoustic simulation model is established,and the flow noise source is imported into the sound field grid to calculate the sound pressure at the far-field response point.The calculated sound pressure levels and resonance frequencies show good agreement with the experimental results.To address the issue of airflow regeneration noise within the cavity,perforated tubes are selected as a means of noise suppression.An experimental platformfor airflow regeneration noise is constructed,and experimental samples are processed to analyze and verify the noise suppression effect of perforated tube expansion cavities under different airflow velocities.The research findings indicate that the perforated tube expansion cavity can effectively suppress low-frequency aerodynamic noise within the cavity by impeding the formation of strong shear layers.Moreover,the semi-perforated tube expansion cavity demonstrates the most effective suppression of aerodynamic noise.展开更多
A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefin...A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefinite-difference time-domain method,the parameters of the M-PCNC,including cavity thickness and width,lattice constant,and radii and numbers of holes,are optimized,with the quality factor Q and mode volume Vm as performance indicators.Mutual modulation of the lattice constant and hole radius enable the proposed M-PCNC to realize outstanding performance.The optimized cavity possesses a high quality factor Q 1.45105 and an ultra-small mode=×volume Vm 0.01(λ/n)[Zeng et al.,Opt Lett 2023:48;3981–3984]in the telecommunications wavelength range.Light can be progres-=sively squeezed in both the propagation direction and the perpendicular in-plane direction by a series of interlocked anti-slots and slots in the diamond-shaped hole structure.Thereby,the energy can be confined within a small mode volume to achieve an ultra-high Q/Vm ratio.展开更多
Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been deve...Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been developed and applied to predict the cav-ity radiusand volume fraction of cavity growth. The final prediction on the cavityradius and volume fraction distribution was exhibited as colorful shade pictures. Theexperimental studies wereperformed under similar conditions to the numerical oneand provided for quantitativecomparison. According to the metallography observation,the radius and volume fraction of cavity growth was quantitative achieved by usingProfound--Iron & steel software. The numerical results were in reasonable quantita-tive agreement with the experiment.展开更多
Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean ca...Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean cavity prediction are compared with experimental sound pressure level(SPL)data from QinetiQ,UK.DDES results agree well with the experimental data.Furthermore,comparisons are made with the predicted SPL between the three configurations to find out the effect of different passive control methods.Both the spoilers can suppress the over-all SPL up to 8dB.The main focuses of this investigation are to exam the DDES method on cavity aeroacoustic analysis and test the noise suppression effect by saw tooth spoiler and flattop spoiler.展开更多
Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of ma...Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.展开更多
The performances of high power Er/Yb codoped fiber linear cavity lasers are investigated numerically. The numerical analysis is based on the iterative solution of rate equations for population density of the Er/Yb ion...The performances of high power Er/Yb codoped fiber linear cavity lasers are investigated numerically. The numerical analysis is based on the iterative solution of rate equations for population density of the Er/Yb ions. The behaviors of co-pump and counter-pump methods are contrasted. Dependence of output power on input pump power, output reflectivity, operating wavelength and active fiber length is simulated, respectively. High conversion efficiency Er/Yb laser output is obtained in simulations and experiments.展开更多
Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is es...Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.展开更多
Numerical simulations are used to investigate the self-sustained oscillating flows past an open cavity. The two-dimensional incompressible Navier-Stokes equations are solved directly by using the finite difference met...Numerical simulations are used to investigate the self-sustained oscillating flows past an open cavity. The two-dimensional incompressible Navier-Stokes equations are solved directly by using the finite difference method for cavities with an upstream laminar boundary layer. A series of simulations are performed for a variety of cavity length-to-depth ratio. The results show the switching among some flow modes including non-oscillation mode, shear layer mode and wake mode. The variation of the Strouhal number is in favorable agreement with available experimental data. The results of flow fields in the cavity reveal the relationship between the cavity shear layer oscillation modes and recirculating vortices in the cavity.展开更多
The cavity growth was studied in uniaxial tension of superplastic magnesium alloy. An exponentially increasing cavity growth model was introduced into the numerical simulation effectively. A three dimensional rigid vi...The cavity growth was studied in uniaxial tension of superplastic magnesium alloy. An exponentially increasing cavity growth model was introduced into the numerical simulation effectively. A three dimensional rigid visco plastic finite element method (FEM) program was developed to predict the variation of radius and volume fraction of cavity. Experimental radius and volume fraction of cavity were determined based on the optical microscope observation and analyses. The values obtained by numerical simulation are perfectly in agreement with experimental results. The results are potentially helpful to designing the optimal processing parameters for superplastic forming of materials and to enhance their subsequent mechanical properties.展开更多
The cavity formation and propagation process of stress wave from parallel hole cut blasting was simulated with ANSYS/LS-DYNA 3D nonlinear dynamic finite element software. The distribution of element plastic strain, no...The cavity formation and propagation process of stress wave from parallel hole cut blasting was simulated with ANSYS/LS-DYNA 3D nonlinear dynamic finite element software. The distribution of element plastic strain, node velocity, node time-acceleration history and the blasting cartridge volume ratio during the process were analyzed. It was found that the detonation of charged holes would cause the interaction of stress wave with the wall of uncharged holes. Initial rock cracking and displacement to neighboring uncharged holes become the main mechanism of cavity formation in early stage.2008 University of Science and Technology Beijing. All rights reserved.展开更多
To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and p...To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.展开更多
Numerical method by solving Reynolds-averaged Navier-Stokes equations is presented to solve the vertical high-speed water entry problem of a cone-cylinder. The results of the trajectory and cavity shape agree well wit...Numerical method by solving Reynolds-averaged Navier-Stokes equations is presented to solve the vertical high-speed water entry problem of a cone-cylinder. The results of the trajectory and cavity shape agree well with the results obtained by the analytical model from literatures. The velocity of the projectile decays rapidly during the penetration,which is about 90% losing in 80D penetration depth. Pressure distributions are also discussed and the results show that the largest pressure appears on the tip of the cone and the lowest pressure occurs inside the cavity and causes vapor generation. For inside the cavity,there is always a supplement of air from outside before the splash closed,after that,the cavity is mainly filled with vapor.展开更多
Supercavitation is a revolutionary technique to achieve high drag reduction for underwater vehicle.It can help us to break through the conventional speed barrier.This article presents a numerical algorithm for ventila...Supercavitation is a revolutionary technique to achieve high drag reduction for underwater vehicle.It can help us to break through the conventional speed barrier.This article presents a numerical algorithm for ventilated supercavitation flow field based on mixture multiphase flow model,briefs the calculation results and compares them with that tested in high-speed water tunnel and towing tank.The mathematical model,its numerical calculation method,computational region and boundary conditions are discussed in detail.Some pertinent nondimensional parameters about the ventilated supercavitation,such as geometrical configuration of supercavity,drag coefficient and ventilation rate are investigated.Reynolds number is selected to predict gas ventilation rate instead of Froude number.Finally,based on the test and simulation results,a semi-empirical formula of the ventilation rate estimation suitable for different conical angle caritators is proposed.展开更多
Heat exchangers are utilized extensively in different industries and technologies.Consequently,optimizing heat exchangers has been a major concern among researchers.Although various studies have been conducted to impr...Heat exchangers are utilized extensively in different industries and technologies.Consequently,optimizing heat exchangers has been a major concern among researchers.Although various studies have been conducted to improve the heat transfer rate,the use of a wavy wall in the presence of different types of heat transfer mechanisms has not been investigated.This study thus investigates the mixed heat transmission behavior of fluid in a horizontal channel with a cavity and a hot,wavy wall.The fluid flow in the channel is considered laminar,and the governing equations including continuity,momentum,and energy are all solved numerically.The numerical solution is stabilized by using a first-order multi-dimensional characteristic-based scheme in combination with a fifth-order Runge-Kutta method.The flow and heat transfer effects of varying Richardson numbers,Reynolds numbers,wave amplitude,wavelength,channel height,and cavity width are examined.The results indicate that the mean Nusselt number increases with an increase in Reynolds number,wave amplitude,and cavity width,while it decreases with an increase in Richardson number,wavelength,and channel height.The minimum Nusselt number is calculated to be 0.7,whereas the maximum Nusselt number is 27.09.The Nusselt number has only increased by 40%in the higher depths of the cavity,despite the Richardson number being 10,000 times larger.But this figure increases to 130%at lower depths.The mean Nusselt number is thus significantly influenced by channel height and cavity width.The influence of wave amplitude on the mean Nusselt number is twice that of wavelength.展开更多
文摘This paper conducts a Large Eddy Simulation (LES) of Rayleigh Bénard convection in a cubic cavity based on the WMLES S-Omega subgrid-scale model. For a cubic cavity with a vertical temperature difference of 6.7°C and 20°C, the velocity pulsation profiles and the mean velocity profiles of the vertical section in the middle of the cubic cavity were simulated, respectively. And they are consistent with the experiment results. Furthermore, the mean velocity field of the vertical cross-section in the middle of the cavity was calculated. Structures of the mean velocity field in the two cases are similar. A counterclockwise large vortex is found to occupy the cavity, and there are two small clockwise vortices in the lower left and upper right corners, and the mean velocity fields at two different temperature differences are consistent with the experimental results. The two-dimensional instantaneous temperature field and mean temperature field with different cross-sections in the z-direction, as well as the three-dimensional instantaneous isothermal surface structure, indicate that the large-scale circulation motion within the cubic cavity is moving diagonally. In addition, the structure of the mean streamline also illustrates this viewpoint. For the reverse vortex formed at two corners in the mean streamline structure, we used the Q criterion to identify and obtain two vortex structures similar to boomerangs. The basic turbulent structure in RB thermal convection includes the rising and falling plumes generated by buoyancy effects.
基金the National Natural Science Foundation of China (1047202510672036)the Natural Science Foundation of Liaoning Province,China (20032109)
文摘To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models were recons- tructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated by fluid dynamics with finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to different airflow distribution in the nasal cavities and variation of the main airstream passing through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than half of the overall resistance. The characteristic model of nasal cavity was extracted on the basis of characteristic points and dimensions deduced from the original models. It showed that either the geometric structure or the airflow field of the two kinds of models was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that could properly represent the original model in model studies on nasal cavity.
文摘A three-dimensional computational fluid dynamics (CFD) model was developed to simulate a 150-t top-blown converter. The ef-fect of different lance heights on the cavity shape was investigated using the volume of fluid (VOF) method. Numerical simulation results can reflect the actual molten bath surface waves impinged by the supersonic oxygen jets. With increasing lance height, the cavity depth de-creases, and the cavity area, varying like a parabola, increases and then decreases. The cavity area maximizes at the lance height of 1.3 m. Under the three different lance heights simulated in this study, all of the largest impact velocities at the molten bath surface are between 50 m/s and 100 m/s.
基金financially supportedby the National Key Research and Development Program of China(No.2020YFB1710100)the State Key Laboratory of Special Rare Metal Materials(Contract No.SKL2018K004)+1 种基金the Northwest Rare Metal Materials Research Institute Ningxia Co.,Ltd.,the National Natural Science Foundation of China(Grant No.51475181 and 51775205)the AECC Beijing Institute of Aeronautical Materials。
文摘The healing behavior of shrinkage cavity inside the cast Ti6Al4V alloy during hot isostatic pressing(HIP)was investigated experimentally by interrupted hot isostatic pressing tests.The X-ray micro computed tomography was used to record the morphology changes before and after hot isostatic pressing.The two-dimensional geometry obtained by the microCT scan was used in simulation to study the evolution of the real shrinkage cavity during hot isostatic pressing.Shrinkage cavities,shrinkage porosity and small gas pores can be effectively eliminated under proper HIP conditions.The two-dimensional morphology in the simulation results agrees well with the experimental results.This study reveals that plastic deformation,creep and diffusion are the main mechanisms of cavity closure during hot isostatic pressing.In addition,the simplified elliptical pores with aspect ratios at different positions were used to replace the real pores to further study the factors affecting the position of dimples after HIP by simulation.It is found that the position of the dimples mainly depends on the aspect ratio of the elliptical pore and the distance between the pore surface and the external surface of the geometric model.
基金China Academy of Launch Vehicle Technology(Grant No.CALT-2022-03)Science and Technology on Underwater Information and Control Laboratory(Grant No.2021-JCJQ-LB-030-05).
文摘In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbulence structure is described using the shear-stress transport k-ω(SST k-ω) model, and the volume of fluid(VOF) method is used to track the complex air-liquid interface. The motion of spheres during water entry is simulated using an independent overset grid. The numerical model is verified by comparing the cavity evolution results from simulations and experiments. Numerical results reveal that the time interval between the twin water entries evidently affects cavity expansion and contraction behaviors in the radial direction. However, this influence is significantly weakened by increasing the lateral distance between the two spheres. In synchronous water entries, pressure is reduced on the midline of two cavities during surface closure, which is directly related to the cavity volume. The evolution of vortexes inside the two cavities is analyzed using a velocity vector field, which is affected by the lateral distance and time interval of water entries.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant Nos.12104153 and 51765017)China Postdoctoral Science Foundation(Grant No.2021M701963)Training Plan for Academic and Technical Leaders of Major Disciplines in Jiangxi Province,China(Grant No.20204BCJL23034).
文摘The expansion chamber serves as the primary silencing structure within the exhaust pipeline.However,it can also act as a sound-emitting structure when subjected to airflow.This article presents a hybrid method for numerically simulating and analyzing the unsteady flow and aerodynamic noise in an expansion chamber under the influence of airflow.A fluid simulation model is established,utilizing the Large Eddy Simulation(LES)method to calculate the unsteady flow within the expansion chamber.The simulation results effectively capture the development and changes of the unsteady flow and vorticity inside the cavity,exhibiting a high level of consistency with experimental observations.To calculate the aerodynamic noise sources within the cavity,the flow field results are integrated using the method of integral interpolation and inserted into the acoustic grid.The acoustic analogy method is then employed to determine the aerodynamic noise sources.An acoustic simulation model is established,and the flow noise source is imported into the sound field grid to calculate the sound pressure at the far-field response point.The calculated sound pressure levels and resonance frequencies show good agreement with the experimental results.To address the issue of airflow regeneration noise within the cavity,perforated tubes are selected as a means of noise suppression.An experimental platformfor airflow regeneration noise is constructed,and experimental samples are processed to analyze and verify the noise suppression effect of perforated tube expansion cavities under different airflow velocities.The research findings indicate that the perforated tube expansion cavity can effectively suppress low-frequency aerodynamic noise within the cavity by impeding the formation of strong shear layers.Moreover,the semi-perforated tube expansion cavity demonstrates the most effective suppression of aerodynamic noise.
基金supported by the Open Fund of the State Key Laboratory of Advanced Optical Communication Systems and Networks (SJTU)(Grant No. 2023GZKF018)the Open Fund of IPOC (BUPT)(Grant No. IPOC2021B03)+4 种基金the National Natural Science Foundation of China (NSFC)(Grant No. 11974188)the China Postdoctoral Science Foundation (Grant Nos. 2021T140339 and 2018M632345)the Jiangsu Province Postdoctoral Science Foundation (Grant No. 2021K617C)the Postgraduate Research and Practice Innovation Program of Jiangsu Province (Grant No.KYCX22_0945)the Qing Lan Project of Jiangsu Province
文摘A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefinite-difference time-domain method,the parameters of the M-PCNC,including cavity thickness and width,lattice constant,and radii and numbers of holes,are optimized,with the quality factor Q and mode volume Vm as performance indicators.Mutual modulation of the lattice constant and hole radius enable the proposed M-PCNC to realize outstanding performance.The optimized cavity possesses a high quality factor Q 1.45105 and an ultra-small mode=×volume Vm 0.01(λ/n)[Zeng et al.,Opt Lett 2023:48;3981–3984]in the telecommunications wavelength range.Light can be progres-=sively squeezed in both the propagation direction and the perpendicular in-plane direction by a series of interlocked anti-slots and slots in the diamond-shaped hole structure.Thereby,the energy can be confined within a small mode volume to achieve an ultra-high Q/Vm ratio.
文摘Numerical simulation and experimental studies on cavity growth were carreed out dur-ing the bulging process of saperplastic magnesium Alloy. A three--dimensional rigid-viscoplastic finite element program has been developed and applied to predict the cav-ity radiusand volume fraction of cavity growth. The final prediction on the cavityradius and volume fraction distribution was exhibited as colorful shade pictures. Theexperimental studies wereperformed under similar conditions to the numerical oneand provided for quantitativecomparison. According to the metallography observation,the radius and volume fraction of cavity growth was quantitative achieved by usingProfound--Iron & steel software. The numerical results were in reasonable quantita-tive agreement with the experiment.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Funding of Jiangsu Innovation Program for Graduate Education (KYLX_0296)the Fundamental Research Funds for the Central Universities
文摘Delayed detached eddy simulation(DDES)is performed to investigate an open cavity at Ma0.85.Clean cavity and cavity with leading-edge saw tooth spoiler and flattop spoiler,are modeled.The results obtained from clean cavity prediction are compared with experimental sound pressure level(SPL)data from QinetiQ,UK.DDES results agree well with the experimental data.Furthermore,comparisons are made with the predicted SPL between the three configurations to find out the effect of different passive control methods.Both the spoilers can suppress the over-all SPL up to 8dB.The main focuses of this investigation are to exam the DDES method on cavity aeroacoustic analysis and test the noise suppression effect by saw tooth spoiler and flattop spoiler.
文摘Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.
基金National Natural Science Foundation of China ( 60137010 ) Tianjin Key Project Foundation of China(033183611)
文摘The performances of high power Er/Yb codoped fiber linear cavity lasers are investigated numerically. The numerical analysis is based on the iterative solution of rate equations for population density of the Er/Yb ions. The behaviors of co-pump and counter-pump methods are contrasted. Dependence of output power on input pump power, output reflectivity, operating wavelength and active fiber length is simulated, respectively. High conversion efficiency Er/Yb laser output is obtained in simulations and experiments.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61376049,61076044,61107026 and 61204011the Scientific Research Fund Project of Municipal Education Commission of Beijing under Grant No PXM2014-014204-07-000018
文摘Far-field properties dependent on array scale, separation, element width and emitted wavelength are system atically analyzed theoretically and experimentally. An array model based on the finite-difference method is established to simulate the far-field profile of the coherent arrays. Some important conclusions are obtained. To achieve a higher quality beam, it is necessary to decrease separation between elements, or to increase the element width. Higher brightness can be achieved in the array with larger scale. Emitted wavelength also has an influence on the far-field profile. These analyses can be extended to the future design of coherent vertical cavity surface emitting laser arrays.
文摘Numerical simulations are used to investigate the self-sustained oscillating flows past an open cavity. The two-dimensional incompressible Navier-Stokes equations are solved directly by using the finite difference method for cavities with an upstream laminar boundary layer. A series of simulations are performed for a variety of cavity length-to-depth ratio. The results show the switching among some flow modes including non-oscillation mode, shear layer mode and wake mode. The variation of the Strouhal number is in favorable agreement with available experimental data. The results of flow fields in the cavity reveal the relationship between the cavity shear layer oscillation modes and recirculating vortices in the cavity.
文摘The cavity growth was studied in uniaxial tension of superplastic magnesium alloy. An exponentially increasing cavity growth model was introduced into the numerical simulation effectively. A three dimensional rigid visco plastic finite element method (FEM) program was developed to predict the variation of radius and volume fraction of cavity. Experimental radius and volume fraction of cavity were determined based on the optical microscope observation and analyses. The values obtained by numerical simulation are perfectly in agreement with experimental results. The results are potentially helpful to designing the optimal processing parameters for superplastic forming of materials and to enhance their subsequent mechanical properties.
文摘The cavity formation and propagation process of stress wave from parallel hole cut blasting was simulated with ANSYS/LS-DYNA 3D nonlinear dynamic finite element software. The distribution of element plastic strain, node velocity, node time-acceleration history and the blasting cartridge volume ratio during the process were analyzed. It was found that the detonation of charged holes would cause the interaction of stress wave with the wall of uncharged holes. Initial rock cracking and displacement to neighboring uncharged holes become the main mechanism of cavity formation in early stage.2008 University of Science and Technology Beijing. All rights reserved.
基金financially supported by the National Natural Science Foundation of China(Grant No.51774307,52074331,42002182)partially supported by Major Special Projects of CNPC,China(ZD2019-184)。
文摘To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.
基金Sponsored by the Special Fund Project for Technology Innovation Talent of Harbin(Grant No.2013RFLXJ007)the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.201159)
文摘Numerical method by solving Reynolds-averaged Navier-Stokes equations is presented to solve the vertical high-speed water entry problem of a cone-cylinder. The results of the trajectory and cavity shape agree well with the results obtained by the analytical model from literatures. The velocity of the projectile decays rapidly during the penetration,which is about 90% losing in 80D penetration depth. Pressure distributions are also discussed and the results show that the largest pressure appears on the tip of the cone and the lowest pressure occurs inside the cavity and causes vapor generation. For inside the cavity,there is always a supplement of air from outside before the splash closed,after that,the cavity is mainly filled with vapor.
基金Sponsored by National Basic Research Programof China(K1804061802)
文摘Supercavitation is a revolutionary technique to achieve high drag reduction for underwater vehicle.It can help us to break through the conventional speed barrier.This article presents a numerical algorithm for ventilated supercavitation flow field based on mixture multiphase flow model,briefs the calculation results and compares them with that tested in high-speed water tunnel and towing tank.The mathematical model,its numerical calculation method,computational region and boundary conditions are discussed in detail.Some pertinent nondimensional parameters about the ventilated supercavitation,such as geometrical configuration of supercavity,drag coefficient and ventilation rate are investigated.Reynolds number is selected to predict gas ventilation rate instead of Froude number.Finally,based on the test and simulation results,a semi-empirical formula of the ventilation rate estimation suitable for different conical angle caritators is proposed.
文摘Heat exchangers are utilized extensively in different industries and technologies.Consequently,optimizing heat exchangers has been a major concern among researchers.Although various studies have been conducted to improve the heat transfer rate,the use of a wavy wall in the presence of different types of heat transfer mechanisms has not been investigated.This study thus investigates the mixed heat transmission behavior of fluid in a horizontal channel with a cavity and a hot,wavy wall.The fluid flow in the channel is considered laminar,and the governing equations including continuity,momentum,and energy are all solved numerically.The numerical solution is stabilized by using a first-order multi-dimensional characteristic-based scheme in combination with a fifth-order Runge-Kutta method.The flow and heat transfer effects of varying Richardson numbers,Reynolds numbers,wave amplitude,wavelength,channel height,and cavity width are examined.The results indicate that the mean Nusselt number increases with an increase in Reynolds number,wave amplitude,and cavity width,while it decreases with an increase in Richardson number,wavelength,and channel height.The minimum Nusselt number is calculated to be 0.7,whereas the maximum Nusselt number is 27.09.The Nusselt number has only increased by 40%in the higher depths of the cavity,despite the Richardson number being 10,000 times larger.But this figure increases to 130%at lower depths.The mean Nusselt number is thus significantly influenced by channel height and cavity width.The influence of wave amplitude on the mean Nusselt number is twice that of wavelength.