A functionalized activated carbon adsorbent prepared from waste amidoxime resin by modifying with H_(3)PO_(4) and ZnCl_(2) and its excellent Cr(Ⅵ)adsorption

With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.

Adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores for CO_(2) storage:An insight from molecular perspective

It is acknowledged that injecting CO_(2) into oil reservoirs and saline aquifers for storage is a practical and affordable method for CO_(2) sequestration.Most CO_(2) produced from industrial exhaust contains impurity gases such as H_(2)S that might impact CO_(2) sequestration due to competitive adsorption.This study makes a commendable effort to explore the adsorption behavior of CO_(2)/H_(2)S mixtures in calcite slit nanopores.Grand Canonical Monte Carlo(GCMC)simulation is employed to reveal the adsorption of CO_(2),H_(2)S as well as their binary mixtures in calcite nanopores.Results show that the increase in pressure and temperature can promote and inhibit the adsorption capacity of CO_(2) and H_(2)S in calcite nanopores,respectively.CO_(2)exhibits stronger adsorption on calcite surface than H_(2)S.Electrostatic energy plays the dominating role in the adsorption behavior.Electrostatic energy accounts for 97.11%of the CO_(2)-calcite interaction energy and 56.33%of the H_(2)S-calcite interaction energy at 10 MPa and 323.15 K.The presence of H_(2)S inhibits the CO_(2) adsorption in calcite nanopores due to competitive adsorption,and a higher mole fraction of H_(2)S leads to less CO_(2) adsorption.The quantity of CO_(2) adsorbed is lessened by approximately 33%when the mole fraction of H_(2)S reaches 0.25.CO_(2) molecules preferentially occupy the regions near the po re wall and H_(2)S molecules tend to reside at the center of nanopore even when the molar ratio of CO_(2) is low,indicating that CO_(2) has an adsorption priority on the calcite surface over H_(2)S.In addition,moisture can weaken the adsorption of both CO_(2) and H_(2)S,while CO_(2) is more affected.More interestingly,we find that pure CO_(2) is more suitable to be sequestrated in the shallower formations,i.e.,500-1500 m,whereas CO_(2)with H_(2)S impurity should be settled in the deeper reservoirs.

Fine quantitative characterization of high-H2S gas reservoirs under the influence of liquid sulfur deposition and adsorption

In order to clarify the influence of liquid sulfur deposition and adsorption to high-H2S gas reservoirs,three types of natural cores with typical carbonate pore structures were selected for high-temperature and high-pressure core displacement experiments.Fine quantitative characterization of the cores in three steady states(original,after sulfur injection,and after gas flooding)was carried out using the nuclear magnetic resonance(NMR)transverse relaxation time spectrum and imaging,X-ray computer tomography(CT)of full-diameter cores,basic physical property testing,and field emission scanning electron microscopy imaging.The loss of pore volume caused by sulfur deposition and adsorption mainly comes from the medium and large pores with sizes bigger than 1000μm.Liquid sulfur has a stronger adsorption and deposition ability in smaller pore spaces,and causes greater damage to reservoirs with poor original pore structures.The pore structure of the three types of carbonate reservoirs shows multiple fractal characteristics.The worse the pore structure,the greater the change of internal pore distribution caused by liquid sulfur deposition and adsorption,and the stronger the heterogeneity.Liquid sulfur deposition and adsorption change the pore size distribution,pore connectivity,and heterogeneity of the rock,which further changes the physical properties of the reservoir.After sulfur injection and gas flooding,the permeability of TypeⅠreservoirs with good physical properties decreased by 16%,and that of TypesⅡandⅢreservoirs with poor physical properties decreased by 90%or more,suggesting an extremely high damage.This indicates that the worse the initial physical properties,the greater the damage of liquid sulfur deposition and adsorption.Liquid sulfur is adsorbed and deposited in different types of pore space in the forms of flocculence,cobweb,or retinitis,causing different changes in the pore structure and physical property of the reservoir.

Study of the reaction mechanism for preparing powdered activated coke with SO_(2)adsorption capability via one-step rapid activation method under flue gas atmosphere

In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.

Removal of Pb^(2+) and Cd^(2+) by adsorption on clay-solidified grouting curtain for waste landfills

Pb2+ and Cd2+ in leachate were adsorbed on clay-solidified grouting curtain for waste landfills with equilibrium experiment. The cation exchange capacity was determined with ammonium acetate. And the concentration of heavy metal cations in leachate was determined with atomic absorption spectrophotometer. Their equilibrium isotherms were measured, and the experimental isotherm data were analyzed by using Freundlich and Langmuir models. The results show that the adsorption capacities of the heavy metal cations are closely related to the compositions of clay-solidified grouting curtain, and the maximum adsorption appears at the ratio of cement to clay of 2∶4 in the experimental conditions. At their maximum adsorption and pH 5.0, the adsorption capacities of Pb 2+ and Cd 2+ are 16.19mg/g and 1.21mg/g. The competitive adsorption coefficients indicate that the adsorption of clay-solidified grouting curtain for Pb2+ is stronger than that for Cd 2+ . The adsorption process conforms to Freundlich’s model with related coefficient higher than 0.996.

Adsorption of Cd^(2+) in aqueous solutions using KMnO_4-modified activated carbon derived from Astragalus residue

Activated carbon obtained from Astragalus residue was chemically activated by KOH and modified with KMnO4.The samples were characterized by N2 adsorption,Fourier transform infrared spectroscopy,X-ray diffractometry,scanning electron microscopy,and Boehm titration.Accordingly,the original and modified carbon materials were used for the removal of Cd2+from aqueous solution by batch adsorption experiments.Results showed that the contents of oxygen-containing functional groups increased,and MnO2 was nearly uniformly deposited on the surface of activated carbon after modification by KMnO4.The adsorption kinetics was described by pseudo-second order model.Langmuir model fitted the adsorption-isotherm experimental data of Cd2+better than the Freundlich model.The maximum adsorption capacities of the activated carbon before and after modification for Cd2+were 116.96 and 217.00 mg/g,respectively.KMnO4 considerably changed the physicochemical properties and surface texture of activated carbon and enhanced the adsorption capacity of activated carbon for Cd2+.

Polyhydroxyl-aluminum pillaring improved adsorption capacities of Pb^(2+) and Cd^(2+) onto diatomite

In order to greatly improve adsorption capacity, the diatomite was pillared by polyhydroxyl-aluminum.A series of adsorption tests were conducted to obtain the optimum condition for pillared diatomite synthesis. The scanning electron microscopy （SEM）, Fourier transform infrared spectroscopy （FTIR）, surface area and porosity analyzer and micro-electrophoresis were used to determine pore structure and surface property.The pillared diatomite attaining the optimal adsorption densities （qe） of Pb^2＋ and Cd^2＋ was synthesized with the following conditions： Addition of pillaring solution containing Al3＋-oligomers with a concentration range of 0.1-0.2 mol/L to a suspension containing Na＋-diatomite to obtain the required Al/diatomite ratio of 10 mmol/g; synthesis temperature of 80 ℃ for 120 min; aging at a temperature of 105 ℃ for 16 h. The adsorption capacities of Pb^2＋ and Cd^2＋ on pillared diatomite increase by 23.79% and 27.36% compared with natural diatomite, respectively. The surface property of pillared diatomite is more favorable for ion adsorption than natural diatomite. The result suggests that diatomite can be modified by pillaring with polyhydroxyl-aluminum to improve its adsorption properties greatly.

Stellerite-seeded facile synthesis of zeolite X with excellent aqueous Cd^(2+)and Ni^(2+)adsorption performance

Zeolite X was synthesized by a two-step hydrothermal method using natural stellerite zeolite as the silicon seed,and its adsorption performance for Cd^(2+)and Ni^(2+)ions was experimentally and comprehensively investigated.The effects of p H,zeolite X dosage,contact time,and temperature on adsorption performance for Cd^(2+)and Ni^(2+)ions over were studied.The adsorption process was endothermic and spontaneous,and followed the pseudo-second-order kinetic and the Langmuir isotherm models.The maximum adsorption capacitiesfor Cd^(2+)and Ni^(2+)ions at 298 K were 173.553 and 75.897 mg.g-1,respectively.Ion exchange and precipitation were the principal mechanisms for the removal of Cd^(2+)ions from aqueous solutions by zeolite X,followed by electrostatic adsorption.Ion exchange was the principal mechanisms for the removal of Ni^(2+)ions from aqueous solutions by zeolite X,followed by electrostatic adsorption and precipitation.The zeolite X converted from stellerite zeolite has a low n(Si/Al),abundant hydroxyl groups,and high crystallinity and purity,imparting a good adsorption performance for Cd^(2+)and Ni^(2+)ions.This study suggests that zeolite X converted from stellerite zeolite could be a useful environmentally-friendly and effective tool for the removal of Cd^(2+)and Ni^(2+)ions from aqueous solutions.

Kinetic Adsorption of Cd onto Nanometer Al_2O_3/Carbon Fibre

A new nanometer material, nano-Al2O3 with carbon fibre as the carrier, was employed for the removal of Cd with low concentrations from polluted water. The characterization of the material was carried out by means of SEM and TEM. Batch adsorption and elution experiments were carried out to determine the adsorption properties of Cd on the new adsorbent. The classical Thomas model was applied to estimating the equilibrium coefficients of Cd adsorption and the saturated adsorption ability. The results show that the Thomas model is fit for describing the kinetic adsorption process, and the maximum adsorption capacity of the nanometer Al2O3/carbon is 69.29 mg/g. The resulting information also indicates that the desorption of Cd eluted with de-ionized water at a rate of 9.8 mL/min can be neglected. With the advantage of a high adsorption capacity for removing low concentration Cd, the Al2O3/carbon fibre possesses the potentiality to be an effective adsorbent for the removal of Cd from polluted water.

Kinetics, thermodynamics, and equilibrium of As(Ⅲ),Cd(Ⅱ), Cu(Ⅱ) and Pb(Ⅱ) adsorption using porous chitosan bead-supported MnFe_(2)O_(4) nanoparticles

A novel porous nanocomposite,cross-linked chitosan and polyethylene glycol(PEG) bead-supported MnFe_(2) O_(4) nanoparticles(CPM),was developed as an efficient adsorbent to remove metalloid(As(Ⅲ))and heavy metals(Cd(Ⅱ),Cu(Ⅱ),and Pb(Ⅱ)).The characteristics of CPM showed a porous structure,well dispersed MnFe_(2) O_(4),and several of hydroxyl and amino groups(-OH,-NH_(2)).Batch experiments demonstrated that the best adsorption property of As(Ⅲ),Cd(Ⅱ),Cu(Ⅱ),and Pb(Ⅱ) was achieved within 8 h with maximum adsorption capacities of 9.90,9.73,43.94,and 11.98 mg/g,respectively.Competitive and synergistic effects(particularly precipitation) were included in the co-adsorption mechanism of As(Ⅲ) and heavy metals.Thereinto,As(Ⅲ) was partly oxidized by MnFe_(2) O_(4) to As(V),and both were coordinated on MnFe_(2) O_(4) nanoparticles.Pb(Ⅱ) could also bind to MnFe_(2) O_(4) by ion exchange and electrostatic attraction.Furthermore,Cd(Ⅱ) and Cu(Ⅱ) tended to be coordinated on chitosan.Therefore,CPM can serve as a remediation material for water and soil co-contaminated with As(Ⅲ) and heavy metals.

Adsorption behavior of Pb^(2+) and Cd^(2+) ions on bauxite flotation tailings

The adsorption behavior of Pb2+ and Cd2+ ions on bauxite flotation tailings was investigated to demonstrate the adsorptivity of the bauxite flotation tailings.The adsorption percentage of Pb2+ and Cd2+ ions as a function of adsorbent dosage,solution pH value and shaking time were determined by batch experiments.The maximum adsorption percentage of 99.93% for Pb2+ ions and 99.75% for Cd2+ ions were obtained by using bauxite flotation tailings as adsorbent.The methods,such as zeta potentials,specific surface area measurements and the analysis of adsorption kinetics,were introduced to analyze the adsorption mechanisms of the Pb2+ ions on bauxite flotation tailings.The isoelectric point of bauxite flotation tailings shifts from 3.6 to 5.6 in the presence of Pb2+ ions.The specific surface area of bauxite flotation tailings changes from 12.57 to 20.63 m2/g after the adsorption of Pb2+ ions.These results indicate that a specific adsorption of the cation species happens on the surface of bauxite flotation tailings.Adsorption data of Pb2+ ions on the surface of bauxite flotation tailings can be well described by Langmuir model,and the pseudo-second-order kinetic model provides the best correlation for the adsorption data of Pb2+ and Cd2+ ions on bauxite flotation tailings.

Synthesis, Crystal Structure and Gas Adsorption of a Two-fold Interpenetrated Three-dimensional Framework {[Cd(2-NO_2-BDC)(4,4？-DPA)]·(DMF)}_n

The reaction of Cd（NO_3）_2·4H_2O with 4,4？-dipyridylacetylene（4,4？-DPA） and 2-nitroterephthalic acid（2-NO_2-H_2BDC） in DMF/H_2O mixed solvent has afforded a compound {[Cd（2-NO_2-BDC）（4,4？-DPA）]·（DMF）}_n（1）. Compound 1 has been characterized by single-crystal X-ray diffraction, powder X-ray diffraction, thermogravimetry analysis, and IR spectrum. Compound 1 crystallizes in the monoclinic system, space group P21/n, with a = 12.1488（3）, b = 14.6689（3）, c = 13.1615（3） ？, β = 111.809（3）o, V = 2177.63（9） ？~3, Z = 4, C_（23）H_（18）N_4O_7 Cd, M_r = 574.81, D_c = 1.753 g/cm^3, μ = 8.523 mm^（-1）, F（000） = 1152, the final R = 0.0411 and wR = 0.1064 for 3589 observed reflections with I 〉 2s（I）. In compound 1, the Cd（Ⅱ） ions are linked by the carboxylate groups of 2-NO_2-BDC ligands to give a two-dimensional layered structure based on the centrosymmetric dinuclear Cd_2（COO）_2 units, which are further connected by the 4,4？-DPA ligands to produce a three-dimensional framework with pcu topology. Careful examination revealed that compound 1 is a 2-fold interpenetrating framework. Furthermore, the gas adsorption properties of 1 for N_2 and CO_2 have also been investigated.

CdS/Nb_(2)O_(5)异质结材料的制备、表征及光催化降解环丙沙星研究

采用水热法制备了CdS/Nb_(2)O_(5)纳米复合材料,利用X-射线衍射光谱(XRD)、透射电镜(TEM)、红外光谱(FT-IR)、X-射线光电子能谱(XPS)和紫外-可见漫反射(UV-Vis DRS)对制备的材料进行表征。通过可见光下降解环丙沙星评价材料的光催化活性。结果表明,制备的CdS/Nb_(2)O_(5)纳米复合材料由CdS纳米颗粒分散于Nb_(2)O_(5)纳米笼表面,二者形成紧密的Ⅱ型异质结;CdS的引入增强了Nb_(2)O_(5)的可见光吸收性能,同时提高了光生载流子的分离效率;当CdS的含量为15%时,CdS/Nb_(2)O_(5)可在60 min实现环丙沙星的高效降解,其反应速率常数是CdS的7.5倍,Nb_(2)O_(5)的20倍,空穴是该降解反应的主要活性物种,研究结果为抗生素废水的高效治理提供了一条新思路。

CdS/In_(2)O_(3)/g-C_(3)N_(4)复合材料的制备及光催化性能研究

采用溶剂热法成功合成了一种新型的Z型CdS/In_(2)O_(3)/g-C_(3)N_(4)三元复合光催化材料。通过XRD、SEM、TEM、XPS和紫外-可见漫反射光谱仪对光催化材料的相结构、形貌、原子价态和光响应性能等进行表征,通过可见光降解苯酚评价其光催化活性。结果表明,具有零维结构的CdS、一维结构的In_(2)O_(3)和三维结构的g-C_(3)N_(4)形成了0D/1D/3D三元复合材料,该材料在180 min可有效降解90%的苯酚,降解速率是CdS的2.9倍、g-C_(3)N_(4)的6倍,且具有较高的稳定性。复合材料光催化能力的增强主要归因于三维多孔g-C_(3)N_(4)与CdS和In_(2)O_(3)形成的三维空间电场。三维多孔结构不仅有利于污染物的高效吸附,而且为光催化反应提供活性位点,三维空间和网络互连结构有利于光生电荷的定向迁移,增加载流子寿命。

Synthesis of Li^+ adsorbent(H_2TiO_3) and its adsorption properties

H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.

羧基化柚子皮吸附Cd^(2+)的性能与机制

为探索利用食品加工废弃物柚子皮制备一种重金属离子吸附材料的可行性,通过NaOH将柚子皮中甲酯化的羧基水解成羧酸,再利用TEMPO/次氯酸钠/溴化钠体系将柚子皮中C-6位伯羟基氧化成羧酸,制备出一种羧基化柚子皮吸附材料,同时采用FTIR、SEM-EDS和XPS对柚子皮和吸附Cd^(2+)前后的羧基化柚子皮进行表征,研究其吸附机制。结果表明羧基化柚子皮中羧基含量为2.34 mmol/g,是改性前的10.64倍,且可以有效地去除水溶液中Cd^(2+)。羧基化柚子皮吸附Cd^(2+)更符合Langmuir和伪二阶动力学模型,属于单层化学吸附,对Cd^(2+)的最大吸附量为76.16 mg/g,是改性前的5.81倍。羧基化柚子皮中羧基(-COO^(-))是吸附Cd^(2+)的功能性基团,吸附后形成羧酸镉,其中镉以Cd^(2+)的形式存在,与-COO^(-)的配位方式主要是双齿桥式,该吸附过程是一个阳离子(Na^(+)和Cd^(2+))交换的过程。

Flotation behavior and adsorption mechanism of(1-hydroxy-2-methyl-2-octenyl) phosphonic acid to cassiterite

The flotation behavior and adsorption mechanism of novel（1-hydroxy-2-methyl-2-octenyl） phosphonic acid（HEPA） to cassiterite were investigated by micro-flotation tests, zeta potential measurements, FTIR determination and density functional theory（DFT） calculation. The flotation results demonstrated that HEPA exhibited superior collecting performance compared with styrene phosphonic acid（SPA）. The cassiterite recovery maintained above 90% over a wide pH range of 2-9 with 50 mg/L HEPA. The results of zeta potential measurement and FTIR detection indicated that the adsorption of HEPA onto cassiterite was mainly attributed to the chemisorption between HEPA monoanions and Sn species on mineral surfaces. The DFT calculation results demonstrated that HEPA monoanions owned higher HOMO energy and exhibited a better affinity to cassiterite than SPA, which provided very clear evidence for the stronger collecting power of HEPA presented in floatation test and zeta potential measurement.

Adsorption mechanism of 2-mercaptobenzothiazole on chalcopyrite and sphalerite surfaces:Ab initio and spectroscopy studies

Interaction mechanism of the collector,2-mercaptobenzothiazole（MBT）,with chalcopyrite and sphalerite surfaces were investigated by Fourier transform infrared（FTIR） and density functional theory,Results of FTIR showed that some characteristic peaks of MBT were observed on the chalcopyrite surface,including C=N,C=N-S and C-S stretching vibration peaks,and the adsorption product was CuMBT.But there were no characteristic peaks of MBT on the sphalerite surface.The thione molecular form of MBT was the most efficient and stable,N and exocyclic S were the more favourable reactive sites for nucleophilic attacked by metal atoms.Compared with ZnS（110）,MBT is more readily adsorbed on CuFeS2（112）.Attachment of MBT occurs due to strong bonding through exocyclic S p and s orbits with Cu d orbit on CuFeS2（112） and electron transfer from Cu atom to S atom.Under the vacuum condition,MBT in the form of thione molecular cannot be adsorbed on ZnS（110） spontaneously.

外周血sIL-2R、CD4^(+)/CD8^(+)、TNF-α对初治活动性肺结核老年患者化疗疗效的评估价值

目的探讨外周血可溶性白细胞介素2受体(sIL-2R)、CD4^(+)淋巴细胞百分比/CD8^(+)淋巴细胞百分比比值(下称CD4^(+)/CD8^(+))、肿瘤坏死因子-α(TNF-α)对初治活动性肺结核老年患者化疗疗效的评估价值。方法将2019年12月至2022年12月该院收治的102例初治活动性肺结核老年患者纳入研究作为观察组,另选取102例年龄≥60岁且同期于该院体检的健康者作为对照组。比较两组外周血sIL-2R、TNF-α、CD4^(+)/CD8^(+)水平并分析sIL-2R、TNF-α、CD4^(+)/CD8^(+)间的相关性。观察组均采用2HRZE/4HR抗结核治疗方案,比较观察组治疗前、治疗1个月、治疗6个月时不同疗效患者外周血sIL-2R、TNF-α、CD4^(+)/CD8^(+);分析sIL-2R、CD4^(+)/CD8^(+)、TNF-α水平与疗效的相关性;采用受试者工作特征(ROC)曲线分析各指标用于老年患者化疗疗效评估的效能。结果观察组sIL-2R、TNF-α水平高于对照组,而CD4^(+)/CD8^(+)低于对照组,差异均有统计学意义(P<0.05)。观察组sIL-2R、TNF-α与CD4^(+)/CD8^(+)呈负相关(P<0.05),sIL-2R与TNF-α呈正相关(P<0.05)。治疗1个月、治疗6个月时显效患者sIL-2R、TNF-α水平低于有效患者,而后者又低于无效患者,显效患者CD4^(+)/CD8^(+)高于有效患者,而后者又高于无效患者,差异均有统计学意义(P<0.05)。sIL-2R、TNF-α水平与疗效呈负相关(P<0.05),CD4^(+)/CD8^(+)与疗效呈正相关(P<0.05)。ROC曲线分析显示,治疗1个月、6个月时sIL-2R、CD4^(+)/CD8^(+)、TNF-α联合用于评估疗效的曲线下面积(AUC)明显大于各时间点单项指标用于评估的AUC(P<0.05),而且治疗6个月时各指标联合评估的AUC大于治疗1个月(P<0.05)。结论初治活动性肺结核老年患者sIL-2R、CD4^(+)/CD8^(+)、TNF-α水平与患者疗效密切相关,将以上指标联合用于评估患者化疗疗效具有一定参考价值。