By using CeO2 particles instead of part of Al2O3 particles as filler, the CeO2 was successfully entrapped into the outer layer of the chromizing coatings on the as-deposited nanocrystalline （NC） and microcrystalline...By using CeO2 particles instead of part of Al2O3 particles as filler, the CeO2 was successfully entrapped into the outer layer of the chromizing coatings on the as-deposited nanocrystalline （NC） and microcrystalline （MC） Ni films using a conventional pack-cementation method at 800 °C. For comparison, chromizing was also performed under the same condition on MC Ni film using Al2O3 as filler without CeO2 particles. SEM/EDX and TEM results indicate that the refinement of Ni grain and CeO2 entrapped into the chromizing coatings refine the grain of the chromizing coating. Oxidation at 900 °C indicates that compared with the CeO2-free chromizing coating, the CeO2-dispersed chromizing coating exhibits an increased oxidation resistance. For the CeO2-dispersed chromizing coating, the refinement of Ni grain size significantly decreases the transient-oxidation scaling rate of the chromizing coatings. Together with this, the CeO2-dispersed chromizing coating formed on NC Ni exhibits a better oxidation resistance.展开更多
High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistanc...High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.展开更多
Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crysta...Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crystalline TiO2 coating was deposited using a composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles by vacuum cold spraying (VCS) process. A commercial N-719 dye was used to adsorb on the surface of TiO2 coating to prepare TiO2 electrode, which was applied to assemble dye-sensitized solar cell (DSC). The cell performance was measured under simulated solar light at an intensity of 100 mW·cm-2. Results show that with an FTO substrate the DSC composed of a VCS TiO2 electrode untreated by TiCl4 gives a short-circuit current density of 13.1 mA·cm-2 and an open circuit voltage of 0.60 V corresponding to an overall conversion efficiency of 4.4%. It is found that after TiCl4 treatment to the VCS TiO2 electrode with an FTO substrate, the short circuit current density of the cell increases by 31%, the open-circuit voltage increases by 60 mV and a higher conversion yield of 6.5% was obtained. However, when an ITO substrate is used to deposit TiO2 coating by VCS, after TiCl4 treatment, the conversion efficiency of the assembled cell reduces slightly due to corrosion of the conducting layer on the ITO glass by TiCl4.展开更多
A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the ...A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.展开更多
Coating the hydroxyapatite （HA） on the titanium alloy surface can obtain a bioactive implant with high mechanical properties However, the bonding force between the titanium alloy and the HA was low due to their diff...Coating the hydroxyapatite （HA） on the titanium alloy surface can obtain a bioactive implant with high mechanical properties However, the bonding force between the titanium alloy and the HA was low due to their different coefficient of thermal expansion （CET）. Preparing the multi-layer coating with alleviated thermal stress on titanium alloy substrate is few reported. Fabrication of a TiO2-bioactive glass （BG）-HA bioactive coating was proposed to solve this problem. A particular TiO2 surface was prepared on the titanium alloy substrate by micro-arc oxidation treatment. The BG and HA coating were coated onto the TiO2 surface in turn by using a sol-gel method. The microstructure, surface morphology and phase composition of the coatings were analyzed. The bonding force of coatings was investigated by the nick apparatus. In vitro dissolution was performed by soaking the TiO2-BG-HA coated samples into the simulated body fluid for various periods. Micro-structural observations indicated that no delamination and crack occurred at the interface of HA/BG and BG/TiO2. The bonding between the substrate and coating consists of the mechanical interaction and the chemical bonding. The bonding force could reach about 45 N. The TiO2-BG-HA coating displayed the excellent forming ability of bone-like apatite when it was soaked into the simulated body fluid. This work suggests an innovative way to reduce the internal stress among coatings through varying BG composition to adjust its CTE, so as to enhance the bonding force.展开更多
We investigate the laser damage behaviour of an electron-beam-deposited TiO2 monolayer at different process parameters. The optical properties, chemical composition, surface defects, absorption and laser-induced damag...We investigate the laser damage behaviour of an electron-beam-deposited TiO2 monolayer at different process parameters. The optical properties, chemical composition, surface defects, absorption and laser-induced damage threshold （LIDT） of films are measured. It is found that TiO2 films with the minimum absorption and the highest LIDT can be fabricated using a TiO2 starting material after annealing. LIDT is mainly related to absorption and is influenced by the non-stoichiometric defects for TiO2 films. Surface defects show no evident effects on LIDT in this experiment.展开更多
To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating l...To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating layers by atmospheric pressure plasma spray coating process.By evaluating the corrosion resistance of these materials,their applicability to environmentally friendly power generation equipment such as blades of tidal current turbines was examined.According to the Tafel analysis for micro-areas including the coating layer,the coating/metal interlayer and the base metal,the Al2O3-3TiO2 coating layer and the CoNiCrAlY coating layer show markedly lower corrosion current density than the base metal.The corrosion current density of the CoNiCrAlY coating layer (9.75316×10-8A/cm2) is about 1.6 times more than that of the Al2O3-3TiO2 coating layer (6.13139×10-8A/cm2).展开更多
基金Project(11531319)supported by Scientific Research Fund of Heilongjiang Provincial Education Department,China
文摘By using CeO2 particles instead of part of Al2O3 particles as filler, the CeO2 was successfully entrapped into the outer layer of the chromizing coatings on the as-deposited nanocrystalline （NC） and microcrystalline （MC） Ni films using a conventional pack-cementation method at 800 °C. For comparison, chromizing was also performed under the same condition on MC Ni film using Al2O3 as filler without CeO2 particles. SEM/EDX and TEM results indicate that the refinement of Ni grain and CeO2 entrapped into the chromizing coatings refine the grain of the chromizing coating. Oxidation at 900 °C indicates that compared with the CeO2-free chromizing coating, the CeO2-dispersed chromizing coating exhibits an increased oxidation resistance. For the CeO2-dispersed chromizing coating, the refinement of Ni grain size significantly decreases the transient-oxidation scaling rate of the chromizing coatings. Together with this, the CeO2-dispersed chromizing coating formed on NC Ni exhibits a better oxidation resistance.
文摘High temperature heat-treatment of wood, which is value-added green product, is one of the altematives to chemical treatment. It has better dimensional stability, thermal insulating properties and biological resistance compared to kiln dried wood. It also has dark brown color which is very important for decorative purposes. Unfortunately, this color changes during weathering. Developing a transparent and non-toxic coating for the protection of heat-treated wood against discoloration without changing its natural appearance is the main objective of this study. For this purpose, waterborne acrylic polyurethane base was chosen because of its durability against weathering and non-toxic nature. Natural antioxidants which are extracted from barks and CeO2 nano particles （alone or together with lignin stabilizer） were used as additives to develop different coatings. The protective characteristics of these coatings were compared with highly pigmented and toxic industrial coating under accelerated weathering conditions. The results showed that acrylic polyurethane coatings protected wood better compared to commercially available coating tested in this study. The chemical modifications during accelerated weathering of coated and heat-treated wood surfaces were monitored by X-ray photoelectron spectroscopy analysis. The morphological changes took place during weathering were studied by fluorescence microscope analysis.
文摘Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crystalline TiO2 coating was deposited using a composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles by vacuum cold spraying (VCS) process. A commercial N-719 dye was used to adsorb on the surface of TiO2 coating to prepare TiO2 electrode, which was applied to assemble dye-sensitized solar cell (DSC). The cell performance was measured under simulated solar light at an intensity of 100 mW·cm-2. Results show that with an FTO substrate the DSC composed of a VCS TiO2 electrode untreated by TiCl4 gives a short-circuit current density of 13.1 mA·cm-2 and an open circuit voltage of 0.60 V corresponding to an overall conversion efficiency of 4.4%. It is found that after TiCl4 treatment to the VCS TiO2 electrode with an FTO substrate, the short circuit current density of the cell increases by 31%, the open-circuit voltage increases by 60 mV and a higher conversion yield of 6.5% was obtained. However, when an ITO substrate is used to deposit TiO2 coating by VCS, after TiCl4 treatment, the conversion efficiency of the assembled cell reduces slightly due to corrosion of the conducting layer on the ITO glass by TiCl4.
基金Project supported by the HK Innovation and Technology Fund.
文摘A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.
基金supported by National Natural Science Foundation of China (Grant No.50872110)
文摘Coating the hydroxyapatite （HA） on the titanium alloy surface can obtain a bioactive implant with high mechanical properties However, the bonding force between the titanium alloy and the HA was low due to their different coefficient of thermal expansion （CET）. Preparing the multi-layer coating with alleviated thermal stress on titanium alloy substrate is few reported. Fabrication of a TiO2-bioactive glass （BG）-HA bioactive coating was proposed to solve this problem. A particular TiO2 surface was prepared on the titanium alloy substrate by micro-arc oxidation treatment. The BG and HA coating were coated onto the TiO2 surface in turn by using a sol-gel method. The microstructure, surface morphology and phase composition of the coatings were analyzed. The bonding force of coatings was investigated by the nick apparatus. In vitro dissolution was performed by soaking the TiO2-BG-HA coated samples into the simulated body fluid for various periods. Micro-structural observations indicated that no delamination and crack occurred at the interface of HA/BG and BG/TiO2. The bonding between the substrate and coating consists of the mechanical interaction and the chemical bonding. The bonding force could reach about 45 N. The TiO2-BG-HA coating displayed the excellent forming ability of bone-like apatite when it was soaked into the simulated body fluid. This work suggests an innovative way to reduce the internal stress among coatings through varying BG composition to adjust its CTE, so as to enhance the bonding force.
基金Supported by the National Natural Science Foundation of China under Grant No 60608020.
文摘We investigate the laser damage behaviour of an electron-beam-deposited TiO2 monolayer at different process parameters. The optical properties, chemical composition, surface defects, absorption and laser-induced damage threshold （LIDT） of films are measured. It is found that TiO2 films with the minimum absorption and the highest LIDT can be fabricated using a TiO2 starting material after annealing. LIDT is mainly related to absorption and is influenced by the non-stoichiometric defects for TiO2 films. Surface defects show no evident effects on LIDT in this experiment.
基金Foundation item:Project supported by National Natural Science Foundation of China(20966006)Project supported by Natural Science Foundation of Inner Mongolia Autonomous Region(2014MS0218)Project supported by Innovative Team Development Plan of Higher Education in Inner Mongolia Autonomous Region(NMGIRT-A1603)
基金Project supported by the Ministry of Education,Science Technology(MEST)Korea Industrial Technology Foundation(KOTEF)through the Human Resource Training Project for Regional Innovation
文摘To improve the durability of underwater rotating products,the corrosion characteristics in harsh marine environment were evaluated through various electrochemical experiments on the Al2O3-3TiO2 and CoNiCrAlY coating layers by atmospheric pressure plasma spray coating process.By evaluating the corrosion resistance of these materials,their applicability to environmentally friendly power generation equipment such as blades of tidal current turbines was examined.According to the Tafel analysis for micro-areas including the coating layer,the coating/metal interlayer and the base metal,the Al2O3-3TiO2 coating layer and the CoNiCrAlY coating layer show markedly lower corrosion current density than the base metal.The corrosion current density of the CoNiCrAlY coating layer (9.75316×10-8A/cm2) is about 1.6 times more than that of the Al2O3-3TiO2 coating layer (6.13139×10-8A/cm2).
