A Cell-Based Linear Smoothed Finite Element Method for Polygonal Topology Optimization

The aim of this work is to employ a modified cell-based smoothed finite element method(S-FEM)for topology optimization with the domain discretized with arbitrary polygons.In the present work,the linear polynomial basis function is used as the weight function instead of the constant weight function used in the standard S-FEM.This improves the accuracy and yields an optimal convergence rate.The gradients are smoothed over each smoothing domain,then used to compute the stiffness matrix.Within the proposed scheme,an optimum topology procedure is conducted over the smoothing domains.Structural materials are distributed over each smoothing domain and the filtering scheme relies on the smoothing domain.Numerical tests are carried out to pursue the performance of the proposed optimization by comparing convergence,efficiency and accuracy.

Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method

The main purpose of this paper is to present numerical results of static bending and free vibration of functionally graded porous(FGP) variable-thickness plates by using an edge-based smoothed finite element method(ES-FEM) associate with the mixed interpolation of tensorial components technique for the three-node triangular element(MITC3), so-called ES-MITC3. This ES-MITC3 element is performed to eliminate the shear locking problem and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing an edge. Materials of the plate are FGP with a power-law index(k) and maximum porosity distributions(U) in the forms of cosine functions. The influences of some geometric parameters, material properties on static bending, and natural frequency of the FGP variable-thickness plates are examined in detail.

The use of the node-based smoothed finite element method to estimate static and seismic bearing capacities of shallow strip footings

The node-based smoothed finite element method(NS-FEM)is shortly presented for calculations of the static and seismic bearing capacities of shallow strip footings.A series of computations has been performed to assess variations in seismic bearing capacity factors with both horizontal and vertical seismic accelerations.Numerical results obtained agree very well with those using the slip-line method,revealing that the magnitude of the seismic bearing capacity is highly dependent upon the combinations of various directions of both components of the seismic acceleration.An upward vertical seismic acceleration reduces the seismic bearing capacity compared to the downward vertical seismic acceleration in calculations.In addition,particular emphasis is placed on a separate estimation of the effects of soil and superstructure inertia on each seismic bearing capacity component.While the effect of inertia forces arising in the soil on the seismic bearing capacity is non-trivial,and the superstructure inertia is the major contributor to reductions in the seismic bearing capacity.Both tables and charts are given for practical application to the seismic design of the foundations.

Implementing the Node Based Smoothed Finite Element Method as User Element in Abaqus for Linear and Nonlinear Elasticity

In this paper,the node based smoothed-strain Abaqus user element(UEL)in the framework of finite element method is introduced.The basic idea behind of the node based smoothed finite element(NSFEM)is that finite element cells are divided into subcells and subcells construct the smoothing domain associated with each node of a finite element cell[Liu,Dai and Nguyen-Thoi(2007)].Therefore,the numerical integration is globally performed over smoothing domains.It is demonstrated that the proposed UEL retains all the advantages of the NSFEM,i.e.,upper bound solution,overly soft stiffness and free from locking in compressible and nearly-incompressible media.In this work,the constant strain triangular(CST)elements are used to construct node based smoothing domains,since any complex two dimensional domains can be discretized using CST elements.This additional challenge is successfully addressed in this paper.The efficacy and robustness of the proposed work is obtained by several benchmark problems in both linear and nonlinear elasticity.The developed UEL and the associated files can be downloaded from https://github.com/nsundar/NSFEM.

Bubble-Enriched Smoothed Finite Element Methods for Nearly-Incompressible Solids

This work presents a locking-free smoothed finite element method(S-FEM)for the simulation of soft matter modelled by the equations of quasi-incompressible hyperelasticity.The proposed method overcomes well-known issues of standard finite element methods(FEM)in the incompressible limit:the over-estimation of stiffness and sensitivity to severely distorted meshes.The concepts of cell-based,edge-based and node-based S-FEMs are extended in this paper to three-dimensions.Additionally,a cubic bubble function is utilized to improve accuracy and stability.For the bubble function,an additional displacement degree of freedom is added at the centroid of the element.Several numerical studies are performed demonstrating the stability and validity of the proposed approach.The obtained results are compared with standard FEM and with analytical solutions to show the effectiveness of the method.

A Smoothed Finite Element Method for the Static and Free Vibration Analysis of Shells

A four-node quadrilateral shell element with smoothed membrane-bending based on Mindlin-Reissner theory is proposed. The element is a combination of a plate bending and membrane element. It is based on mixed interpolation where the bending and membrane stiffness matrices are calculated on the boundaries of the smoothing cells while the shear terms are approximated by independent interpolation functions in natural coordinates. The proposed element is robust, computationally inexpensive and free of locking. Since the integration is done on the element boundaries for the bending and membrane terms, the element is more accurate than the MITC4 element for distorted meshes. This will be demonstrated for several numerical examples.

A novel twice-interpolation finite element method for solid mechanics problems

Formulation and numerical evaluation of a novel twice-interpolation finite element method （TFEM） is presented for solid mechanics problems. In this method, the trial function for Galerkin weak form is constructed through two stages of consecutive interpolation. The primary interpolation follows exactly the same procedure of standard FEM and is further reproduced according to both nodal values and averaged nodal gradients obtained from primary interpolation. The trial functions thus constructed have continuous nodal gradients and contain higher order polynomial without increasing total freedoms. Several benchmark examples and a real dam problem are used to examine the TFEM in terms of accuracy and convergence. Compared with standard FEM, TFEM can achieve significantly better accuracy and higher convergence rate, and the continuous nodal stress can be obtained without any smoothing operation. It is also found that TFEM is insensitive to the quality of the elemental mesh. In addition, the present TFEM can treat the incompressible material without any modification.

Displacement fields denoising and strains extraction by finite element method

Optical full-field measurement methods are now widely applied in various domains. In general,the displacement fields can be directly obtained from the measurement,however in mechanical analysis strain fields are preferred.To extract strain fields from noisy displacement fields is always a challenging topic.In this study,a finite element method for smoothing displacement fields and calculating strain fields is proposed.An experimental test case on a holed aluminum specimen under tension is applied to validate this method.The heterogeneous displacement fields are measured by digital image correlation(DIC).By this proposed method,the result shows that the measuring noise on experimental displacement fields can be successfully removed,and strain fields can be reconstructed in the arbitrary area.

界面裂纹的Cell-Based光滑有限元法研究

为提高求解含界面裂纹结构断裂参数的精度,基于界面断裂力学和Cell-Based光滑有限元法,提出了求解双材料界面裂纹断裂参数的Cell-Based光滑有限元法,给出了求解应力强度因子的光滑子域交互积分法,对含中心界面裂纹双材料无限板进行了模拟,并与FEM计算结果和解析解进行了对比,讨论了光滑子元数和单元个数与正则应力强度因子的关系及其收敛性.数值算例结果表明该方法具有很好的收敛性和精度,可为研究人员和工程师设计制造多层材料提供必要参考.

含裂纹压电材料的Cell-Based光滑有限元法

裂纹缺陷限制了压电材料更广泛的应用和相关器件性能的进一步提升.为提高求解压电材料断裂参数的精度和效率,将复势函数法和Cell-based光滑有限元法引入到含裂纹平面压电材料问题中,提出了含裂纹压电材料的Cell-based光滑有限元法.以含中心裂纹压电平板的问题为例,对不同材料、裂纹长度、网格和光滑子元数下的正则强度因子进行了讨论,并与FEM作了对比,数值算例结果表明,Cell-based光滑有限元法改善了有限元法刚度"偏硬"的缺点,具有高精度、高效率的优点.

复合材料层合板的摄动随机Cell-Based光滑有限元

随机性是实际工程结构的固有特性,如何更真实地描述含随机参数结构的随机响应及统计特性,对工程结构的可靠性设计具有非常重要的意义。本文基于Cell-Based光滑有限元,采用四边形单元,推导了基于一阶剪切变形理论的复合材料层合板的光滑有限元公式,降低了网格划分要求,适应不规则网格,并采用离散剪切间隙有效地消除了剪切自锁;结合摄动法和随机场理论,导出了复合材料层合板的摄动随机光滑有限元平衡方程,并给出了结构随机响应数字特征的计算公式,求解了材料属性含随机性的复合材料层合板的随机响应问题,数值算例结果表明了本方法的有效性和准确性。

The smoothed finite element method (S-FEM):A framework for the design of numerical models for desired solutions

The smoothed finite element method (S-FEM) was originated by G R Liu by combining some meshfree techniques with the well-established standard finite element method (FEM). It has a family of models carefully designed with innovative types of smoothing domains. These models are found having a number of important and theoretically profound properties. This article first provides a concise and easy-to-follow presentation of key formulations used in the S-FEM. A number of important properties and unique features of S-FEM models are discussed in detail, including 1) theoretically proven softening effects;2) upper-bound solutions;3) accurate solutions and higher convergence rates;4) insensitivity to mesh distortion;5) Jacobian?free;6) volumetric-locking-free;and most importantly 7) working well with triangular and tetrahedral meshes that can be automatically generated. The S-FEM is thus ideal for automation in computations and adaptive analyses, and hence has profound impact on Al-assisted modeling and simulation. Most importantly, one can now purposely design an S-FEM model to obtain solutions with special properties as wish, meaning that S-FEM offers a framework for design numerical models with desired properties. This novel concept of numerical model demand may drastically change the landscape of modeling and simulation. Future directions of research are also provided.

Selective Smoothed Finite Element Method

The paper examines three selective schemes for the smoothed finite element method （SFEM） which was formulated by incorporating a cell-wise strain smoothing operation into the standard compatible finite element method （FEM）. These selective SFEM schemes were formulated based on three selective integration FEM schemes with similar properties found between the number of smoothing cells in the SFEM and the number of Gaussian integration points in the FEM. Both scheme 1 and scheme 2 are free of nearly incompressible locking, but scheme 2 is more general and gives better results than scheme 1. In addition, scheme 2 can be applied to anisotropic and nonlinear situations, while scheme 1 can only be applied to isotropic and linear situations. Scheme 3 is free of shear locking. This scheme can be applied to plate and shell problems. Results of the numerical study show that the selective SFEM schemes give more accurate results than the FEM schemes.

力电湿多物理场耦合Cell-Based光滑有限元法研究

为了解决压电结构在实际工程应用中受到空气湿度影响的问题,基于压电材料的本构方程、几何方程和平衡方程提出了力电湿多物理场耦合Cell-based光滑有限元模型.建立了一种新型压电俘能器,并对其简化模型的静力学性能进行求解,对比了不同湿度变化对结构性能的影响.与有限元法的计算结果对比,Cell-based光滑有限元法采用较少的网格就能够达到与有限元法采用较多的网格相同的精度,验证了本方法的正确性和有效性.研究发现,较小的湿度变化给结构的广义位移带来了较大的影响.压电结构在潮湿环境下的性能研究为复合材料产品化过程提供了理论依据.

一种适用宽速域冲击的明胶鸟弹数值建模方法

明胶鸟弹在不同撞击速度下表现出不同的响应特性。为解决传统明胶鸟弹本构表征方法在不同速度范围内不能通用的问题,开展了330 g明胶鸟弹以70~190 m/s速度、60°或90°入射刚性铝合金平板试验,记录了冲击力数据及撞击形貌。结果表明,随着撞击速度的提高,鸟弹碎裂得更充分,碎块体积减小。利用LS-DYNA建立了自适应FEM-SPH(finite element method-smoothed particle hydrodynamics)鸟体模型。依据试验结果反演得到一组鸟体本构参数:切线模量为1.33MPa,剪切模量为115.95MPa,Murnaghan状态方程参数γ为10.49,k_(0)为69.77 MPa,体积模量为246.4 MPa,失效塑性应变为1.15,初始屈服应力为0.21 MPa。仿真结果与试验结果具有很好的一致性,冲击力峰值的相对误差在2%以内,冲量的相对误差在10%以内。自适应FEM-SPH鸟体模型具有比SPH模型和拉格朗日模型更高的精度。由自适应模型得到的Hugoniot压强与理论结果具有相同的变化趋势,滞止压强与理论值较接近。

Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3)

Homogenization is a promising approach to capture the behavior of complex structures like corrugated panels. It enables us to replace high-cost shell models with stiffness-equivalent orthotropic plate alternatives. Many homogenization models for corrugated panels of different shapes have been proposed. However, there is a lack of investigations for verifying their accuracy and reliability. In addition, in the recent trend of development of smoothed finite element methods, the cell-based smoothed three-node Mindlin plate element (CS-MIN3) based on the first-order shear deformation theory (FSDT) has been proposed and successfully applied to many analyses of plate and shell structures. Thus, this paper further extends the CS-MIN3 by integrating itself with homogenization models to give homogenization methods. In these methods, the equivalent extensional, bending, and transverse shear stiftriess components which constitute the equivalent orthotropic plate models are represented in explicit analytical expressions. Using the results of ANSYS and ABAQUS shell simulations as references, some numerical examples are conducted to verify the accuracy and reliability of the homogenization methods for static analyses of trapezoidally and sinusoidally corrugated panels.

含大石块泥石流冲击作用下框架结构房屋动力响应研究

基于光滑粒子流体动力学-有限元法(smoothed particle hydrodynamics-finite element method,SPH-FEM)耦合的数值方法,分别从结构破坏形态、冲击力时程、关键点位移和速度、系统能量等方面,研究含大石块泥石流冲击作用下框架结构房屋的动力响应和破坏机理。计算结果表明:SPH-FEM耦合方法能够较好地模拟泥石流冲击爬高、绕流扩散、淤积稳定过程。考虑了三种泥石流强度等级,在低、中强度冲击情况下,框架房屋填充墙受到破坏,房屋结构整体保持稳定;在高强度冲击情况下,可以观察到框架房屋的逐步倒塌过程,框架柱损坏模式体现了剪切破坏或塑性铰链失效机制。对于房屋结构而言,泥石流的冲击破坏能力主要来自龙头的冲击力,龙身冲击力相对于龙头降幅约34.2%,大石块的集中作用是结构柱体局部破坏的主要原因。系统能量主要通过泥石流动能转化为结构内能(17.8%)和摩擦耗能(82.8%)。

二维复杂弹性空腔的边光滑有限元建模及分析

在弹性空腔结构上敷设被动约束层阻尼(passive constraint layer damping, PCLD)可达到减振降噪的效果,针对这类复杂结构建立了二维复合弹性空腔的边光滑有限元耦合动力学模型。其中,PCLD结构采用两节点四自由度的PCLD梁单元,声场采用边光滑有限元模型。以二维全敷设复合矩形空腔模型为数值算例,以精细网格下的有限元法结果作为参考解,对比研究了在相同背景网格下,边光滑有限元法和有限元法的频响结果,发现前者更接近参考解,说明同样的计算成本下,边光滑有限元法具有更高的精确性,特别是在中频计算中。最后,分析了PCLD结构对某汽车驾驶舱的降噪效果,以及黏弹层和约束层厚度参数的影响规律,发现黏弹层厚度增大,可一定程度上降低空腔噪声,而约束层厚度增大,并不能在整个频段得到很好的降噪效果。

高铁大跨双肢墩连续刚构桥减震系梁地震易损性分析

为了解地震作用下减震系梁对高铁大跨双肢墩连续刚构桥的减震效果,以某主跨180 m的山区高铁双肢墩连续刚构桥为背景,分别建立采用钢筋混凝土(RC)系梁、2种新型减震系梁(可屈服钢系梁与斜交筒式黏弹性阻尼器系梁)方案的全桥有限元模型,对比分析不同系梁方案下的结构损伤、桥面平顺性指标等。结果表明:2种新型减震系梁均不会在地震作用下出现负刚度,新型减震系梁方案较RC系梁方案能有效降低系梁和主墩的结构损伤概率,主墩最大压应变降低83.3%;但减震系梁对震后桥面平顺性指标无明显改善,需采用更具针对性的技术措施。

接触与大变形问题的光滑有限元分析

橡胶材料因具有良好的抗震、吸能作用,在实际工程中应用广泛.然而橡胶超弹性材料的碰撞属于强非线性问题,分析橡胶材料的接触碰撞和大变形问题对于提高装置的缓冲性能具有重要意义.光滑有限元法(smoothed finite element method,S-FEM)是一种弱形式的数值计算方法,相比于传统的有限元方法,光滑有限元法对网格的质量要求不高,允许单元在计算过程中发生较大的变形,且光滑域的构造比较灵活,在不增加自由度的前提下,可以达到较高的精度.在光滑有限元法的基础上,采用双势方法进行接触计算,以充分利用光滑有限元法计算大变形问题的优点和双势方法求解接触力的优势.通过与有限元软件MSC.Marc的数值结果对比,验证了该算法的准确性和能量守恒性,并且分析了摩擦因数对碰撞体的影响.