Experimental Study on Cemented Soil in Sulfate Radical Corrosive solution

The cemented soil is a widely used method to stabilize the weak soil.It would be working in polluted environment,and be influenced by environmental pollution such as acid rain,seawater invasion or industrial pollution,which may lead to deterioration of the structure.In order to simulate and study the erosion effect process including as the changes of corrosive degree of surface,compression strength of cemented soil samples and SO_(4)^(2-)concentration of corrosive solutions,a series of tests are conducted on the cemented soil blocks cured in different concentrations of MgSO_(4),H_(2)SO_(4)and Na_(2)SO_(4)solutions.The test results show that the corrosive degree of the sample surface increases while the compression strength decreases with the increase of the corrosive solution concentration at the same erosion time,and that the corrosive degree increases with the corrosive time.The influence of inorganic compound solutions on the cemented soil follows the order of Na_(2)SO_(4)>MgSO_(4)>H_(2)SO_(4).By analyzing the mechanism,the corrosive type of H_(2)SO_(4)and MgSO_(4)solutions to cemented soil is a composite type of resolving and crystallizing combination,and Na_(2)SO_(4)solution to cemented soil is a composite type of dissolving and crystallizing combination.

Studies on parallel seismic testing for integrity of cemented soil columns

The principle and process of parallel seismic (PS) testing for the integrity testing of cemented soil columns are in- troduced in this paper. A three-dimensional (3D) finite element model (FEM) for the pile-soil system is established for impulse responses. Under saturated soil or unsaturated soil condition, several vibrating velocity-time histories at different depths in parallel hole are obtained based on the numerical simulation. It shows that the length of the pile and the one-dimensional (1D) P-wave velocity in the pile can be determined easily from the features of the mentioned velocity-time histories. By examining the slopes of the first arrival time plotted versus depth or the depth where the amplitude of the first arrival significantly decreases, the length of the pile can be determined. The effects of the 3D P-wave propagation through the saturated soil and the defect of the cemented soil column on the velocity-time histories are also investigated.

The compressive strength experimental study of cemented soil under H2SO4 corrosive in earlier period

In order to simulate and study the erosion effect process such as the changes of corrosive depth and unconfined compression strength of cemented soil sample in earlier period from 0 day to 60 days, a series of tests including unconfined compressive tests, measuring the blocks＇ sizes, and taking photos, are conducted on the cemented soil blocks which were cured in different concentrations of H2SO4 solutions. The results of tests show that the corrosive depth is increasing and the unconfined compression strength is decreasing with the increase of H2SO4 solution concentration at the same erosion time, and the corrosive degree is increasing with the corrosive time. In the earlier state, the corrosive effect is serious, but the effect becomes slow in the later state in the same concentrated H2SO4 solution. After take statistics the date, a coefficient a is put forward to predict the reduction of the compressive strength of cemented soil in various concentration of H2SO4 solution, which could be used in practical design.

The Cemented Material Dam： A New, Environmentally Friendly Type of Dam

The first author proposed the concept of the cemented material dam （CMD） in 2009. This concept was aimed at building an environmentally friendly dam in a safer and more economical way for both the dam and the area downstream. The concept covers the cemented sand, gravel, and rock dam （CSGRD）, the rockfill concrete （RFC） dam （or the cemented rockfill dam, CRD）, and the cemented soil dam （CSD）. This paper summarizes the concept and principles of the CMD based on studies and practices in projects around the world. It also introduces new developments in the CSGRD, CRD, and CSD.

The Electrical Resistivity Characteristics of Cement-Soil and Flyash-Lime-Soil

The electrical resistivity characteristics of cement soil and flyash lime soil are investigated in the laboratory and the field. It is shown that the electrical resistivities of the cement soil and flyash lime soil are sensitive to water content, degree of saturation and unconfined strength. The cement soil and flyash lime soil with higher water content, greater degree of saturation, lower unconfined strength has lower electrical resistivity. Electrical resistivity is also correlated with additives. Based on the tests, it is concluded that the electrical resistivity method is available for checking the effectiveness of the soil improvement by the cement soil and flyash lime soil mixing pile in terms of engineering practice.

Experimental research on variation of porosity in destruction process of cement stabilized soil

Based on the process of reinforcing soft soil using cement in laboratory, the porosity of test samples under different pressures conditions were determined through mercury intrusion porosimetry. The experiment was introduced and the law of porosity variation was summarized. The results show that when stress is between 0 and 0.15--0.2 qu, porosity decreases along with the pressure, then porosity has increased in the wake of the pressure until the sample damaged. It can provide an experimental basis for exploring the failure mechanism of cement stabilized soil from the microscopic view and the study to establish the microcosmic constitutive model of cement stabilized soil.

Key parameters controlling electrical resistivity and strength of cement treated soils

The improvement of question soils with cement shows great technical, economic and environmental advantages. And interest in introducing electrical resistivity measurement to assess the quality of cement treated soils has increased markedly recently due to its economical, non-destructive, and relatively non-invasive advantages. This work aims to quantify the effect of cement content （aw）, porosity （nt）, and curing time（T） on the electrical resistivity （p） and unconfined compression strength （UCS） of cement treated soil. A series of electrical resistivity tests and UCS tests of cement treated soil specimen after various curing periods were carried out. A modified Archie empirical law was proposed taking into account the effect of cement content and curing period on the electrical resistivity of cement treated soil. The results show that nt/（aw·T） and nt/（aw·T^1/2） ratio are appropriate parameters to assess electrical resistivity and UCS of cement treated soil, respectively. Finally, the relationship between UCS and electrical resistivity was also established.

Laboratory Test on Long-Term Deterioration of Cement Soil in Seawater Environment

Laboratory tests were conducted to study the effects of curing time, cement ratio and seawater pressure on cement soil deterioration formed at simulative marine soft clay sites. Deterioration depth was determined on the basis of characteristics of penetration resistance and penetration depth curves, and the deterioration depth of cement soil with the cement ratio of 7%, reached 31.8 mm after 720 d. Results of research indicated that deterioration extended quickly under seawater environment and the deterioration depth increased with the prolonging curing time. In addition, the water pressure could speed up deterioration. With the increase of cement content, the strength of cement soil increased obviously. At the same time, the deterioration depth decreased significantly. The concentration of calcium ion in the cement stabilized soil increased with the increase of depth, while that of magnesium ion gradually decreased. The variations were consistent with energy dispersive spectrometer(EDS)analysis results, and the calcium concentration with depth was in a good consistency with strength distribution at long term. The results showed that the deterioration became more serious with the curing time, and it was related to calcium leaching.

Study of elastic-plastic damage model of cement consolidated soil with high organic content

On the basis of elastic-plastic damage model of cement consolidated soil,the authors took organic contents into reasonable damage variable evolution equation in order to seek relation between the organic contents and parameters in the equation,and established the elastic-plastic damage model of cement consolidated soil considering organic contents.The results show that the parameters change correspondingly with difference of the organic contents.The higher the organic contents are,the less the valves of the parameters such as elastic modulus(E),material parameters(K,n) and damage evolution parameter(ε) become,but the larger strain damage threshold value(εd) of the sample is.Meanwhile,the calculation results obtained from established model are compared with the test data in the condition of common indoors test,which is testified with reliability.

Triaxial shear behavior of a cement-treated sand——gravel mixture

A number of parameters,e.g.cement content,cement type,relative density,and grain size distribution,can influence the mechanical behaviors of cemented soils.In the present study,a series of conventional triaxial compression tests were conducted on a cemented poorly graded sandegravel mixture containing 30% gravel and 70% sand in both consolidated drained and undrained conditions.Portland cement used as the cementing agent was added to the soil at 0%,1%,2%,and 3%(dry weight) of sandegravel mixture.Samples were prepared at 70% relative density and tested at confining pressures of 50 kPa,100 kPa,and150 kPa.Comparison of the results with other studies on well graded gravely sands indicated more dilation or negative pore pressure in poorly graded samples.Undrained failure envelopes determined using zero Skempton’s pore pressure coefficient (= 0) criterion were consistent with the drained ones.Energy absorption potential was higher in drained condition than undrained condition,suggesting that more energy was required to induce deformation in cemented soil under drained state.Energy absorption increased with increase in cement content under both drained and undrained conditions.

Deformation and stability of the seawall,considering the strength uncertainty of cement mixing piles

The cement mixing (CM) pile is a common method of improving soft offshore ground. The strength growth of CM piles under complex conditions is affected by many factors, especially the cement and moisture contents, and shows significant uncertainty. To investigate the stochasticity of the early strength of CM piles and its impact on the displacement and stability of a seawall, a series of laboratory tests and numerical analyses were carried out in this study. Vane shear tests were conducted on the cement-solidified soil to determine the relationships between the undrained shear strength s_(u) of the cement soil curing in the seawater and the cement content a_(c), as well as the in situ soil moisture content w. It can be inferred that the 24 h undrained shear strength follows a normal distribution. A numerical model considering the random CM pile strength was established to investigate the deformation of the seawall. Due to the uncertainty of CM pile strength, the displacement of the seawall demonstrates a certain discreteness. The decrease of the mean undrained shear strength of CM piles causes a corresponding increase in the average displacement of the seawall. When the mean strength of CM piles is lower than a certain threshold, there is a risk of instability. Furthermore, the heterogeneity of the strength within an individual CM pile also has an impact on seawall displacement. Attention should be paid to the uncertainty of CM pile strength to control displacement and stability.

Experimental study on geosynthetic-reinforced sand fill over marine clay with or without deep cement mixed soil columns under different loadings

Geosynthetics and deep cement mixed(DCM)soil columns have been widely used to improve soft soil grounds in many countries and regions.This paper presents an experimental study on a geosynthetic-reinforced sand fill over marine clay with or without DCM columns under different loadings.Two tests were conducted on the sand fill reinforced with fixed-end and free-end geosynthetics over marine clay under three-stage local loading to investigate the effects of the boundary conditions of geosynthetic reinforcement on reducing settlements.It is observed that the fixed-end geosynthetic sheet is more effective in reducing settlements than the free-end condition under identical local loading.Another test was conducted on the fixed-end geosynthetic-reinforced sand fill over the marine clay improved by DCM columns under single-stage uniform loading.The vertical stresses on the marine clay and on the DCM columns,as well as the tensile strains of the geosynthetic sheet in the overlying sand fill,were measured.The results revealed that the stress concentration ratio increases with an increase in consolidation settlements,and the maximum tensile strain of the geosynthetic sheet occurs near the edge rather than at the center of the top surface of the DCM columns.