期刊文献+
共找到1,321篇文章
< 1 2 67 >
每页显示 20 50 100
Optimization and Characterization of Cellulose Extraction from Grevillea robusta (Silky Oak) Leaves by Soda-Anthraquinone Pulping Using Response Surface Methodology
1
作者 Catherine N. Muya John M. Onyari +2 位作者 Lydia W. Njenga Joab O. Onyango Wilson M. Gitari 《Green and Sustainable Chemistry》 2024年第3期43-65,共23页
Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on Grevillea robusta fall leaves. The pulping factors studied were... Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on Grevillea robusta fall leaves. The pulping factors studied were: NaOH charge 5% to 20% w/v, pulping time 30 to 180 minutes, and the anthraquinone charge 0.1 to 0.5% w/w based on the oven-dried leaves. The responses evaluated were the pulp yield, cellulose content, and the degree of delignification. Various regression models were used to evaluate the effects of varying the pulping conditions. The optimum conditions attained were;NaOH charge of 14.63%, 0.1% anthraquinone, and a pulping period of 154 minutes, corresponding to 20.68% pulp yield, 80.56% cellulose content, and 70.34% lignin removal. Analysis of variance (ANOVA), was used to determine the most important variables that improve the extraction process of cellulose. The experiment outcomes matched those predicted by the model (Predicted R2 = 0.9980, Adjusted R2 = 0.9994), demonstrating the adequacy of the model used. FTIR analysis confirmed the elimination of the non-cellulosic fiber constituents. The lignin and hemicellulose-related bands (around 1514 cm−1, 1604 cm−1, 1239 cm−1, and 1734 cm−1) decreased with chemical treatment, indicating effective cellulose extraction by the soda-anthraquinone method. Similar results were obtained by XRD, SEM and thermogravimetric analysis of the extracted cellulose. Therefore, Grevillea robusta fall leaves are suitable renewable, cost-effective, and environmentally friendly non-wood biomass for cellulose extraction. 展开更多
关键词 Cellulose Extraction response surface methodology central composite design DELIGNIFICATION
下载PDF
Optimization of Extraction Process of Clerodendrum philippinum Schauer var. simplex Mlodenke Total Flavonoids(CPTF) by Central Composite Design-Response Surface Methodology 被引量:3
2
作者 Bo LI Simao HUANG +3 位作者 Xiaohua PANG Boting XI Houkang CAO Kefeng ZHANG 《Medicinal Plant》 CAS 2018年第3期17-20,共4页
[Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Bas... [Objectives] The research aimed to optimize extraction process of Clerodendrum philippinum Schauer var. simplex Mlodenke total flavonoids( CPTF),and provide reference for its development and utilization. [Methods] Based on single-factor test,ethanol concentration,extraction temperature and extraction time were taken as independent variables,and total flavonoids yield was taken as dependent variable. The test was conducted according to central composite design principle. Multivariate linear regression and binomial equation fitting of the result were conducted,and extraction process of CPTF was optimized by using response surface methodology. [Results]The optimal extraction process of CPTF was as below: ethanol concentration 54. 76%,extraction temperature 83. 92℃,extraction time 102. 64 min,solid-liquid ratio 1:20,extraction for twice. [Conclusions] The extraction process of CPTF by central composite design-response surface methodology was simple and feasible,with reliable prediction result,which was suitable for industrial production. 展开更多
关键词 central composite design-response surface methodology Guoqiangfeng Total flavonoids Extraction process
下载PDF
Optimization of Extraction Process of Total Flavonoids from Akebia trifoliata (Thunb.) Koidz. by Central Composite Design-Response Surface Methodology 被引量:4
3
作者 Houkang CAO Boting XI +2 位作者 Simao HUANG Xiaohua PANG Kefeng ZHANG 《Medicinal Plant》 2017年第2期15-18,共4页
[Objectives]To optimize extraction process of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,so as to provide references for development and use of Akebia trifoliata( Thunb.) Koidz. [Methods]The extraction ra... [Objectives]To optimize extraction process of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,so as to provide references for development and use of Akebia trifoliata( Thunb.) Koidz. [Methods]The extraction rate of total flavonoids of Akebia trifoliata( Thunb.)Koidz. was taken as observation indicator. On the basis of single factor experiment,central composite design( CCD) was used to evaluate the effects of the extraction temperature,extraction time,and ethanol concentration on the extraction process. Multiple linear regression and binomial fitting were used,and response surface methodology( RSM) was used to select the optimum extraction process. [Results] The optimum extraction process conditions for total flavonoids of Akebia trifoliata( Thunb.) Koidz. was extraction temperature: 83. 92 ℃; extraction time:96. 47 min; ethanol concentration: 63. 92%; extraction times: two times; solid to liquid ratio: 1 ∶ 20; extraction rate of total flavonoids:4. 55%. [Conclusions] The central composite design-response surface methodology( CCD-RSM) is simple,convenient,and feasible for extraction of total flavonoids from Akebia trifoliata( Thunb.) Koidz.,and the prediction results are reliable. 展开更多
关键词 central composite design-response surface methodology(CCD-RSM) Akebia trifoliata(Thunb.) Koidz. TOTAL FLAVONOIDS Extraction PROCESS
下载PDF
Application of response surface methodology and central composite rotatable design for modeling the influence of some operating variables of the lab scale thickener performance 被引量:2
4
作者 Aghajani Shahrivar Alireza Soltani Goharrizi Ataallah +3 位作者 Ebrahimzadeh Gheshlaghi Majid Sarafi Amir Razmirad Mohammad Abdollahi Hadi 《International Journal of Mining Science and Technology》 SCIE EI 2013年第5期717-724,共8页
This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a l... This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing. 展开更多
关键词 response surface methodology central composite rotatable design MODELING THICKENER
下载PDF
Extraction Process Optimization of Total Flavonoids from Mallotus apelta Stems by Central Composite Design/Response Surface Method 被引量:2
5
作者 Xiao HUANG Dengfeng ZOU +3 位作者 Ruifen FAN Shuoying GUO Hua ZHU Aize XIE 《Medicinal Plant》 2017年第5期54-57,共4页
[Objectives] To optimize the extraction process of total flavonoids in stems of Mallotus apelta. [Methods]On the basis of singlefactor test,with volume fraction of ethanol,extraction time and ratio of solvent as indep... [Objectives] To optimize the extraction process of total flavonoids in stems of Mallotus apelta. [Methods]On the basis of singlefactor test,with volume fraction of ethanol,extraction time and ratio of solvent as independent variables,the content of total flavonoids as dependent variables,the completely secondary response surface regression fitting was conducted on the independent and dependent variables,and the Response Surface Method was used to optimize the optimum extraction process of total flavonoids in Mallotus apelta stems and predict the optimum process. [Results] The optimum extraction process of total flavonoids in Mallotus apelta was determined as follows: ethanol concentration of 71. 5%; extraction time of 154. 6 min; solid-liquid ratio of 1∶19. 2; total flavonoids content of 7. 060 mg/g; fitted binomial squared correlation coefficient R^2= 0. 8751.[Conclusions]Composite Design/Response Surface Method could be used in the extraction process optimization of total flavonoids in Mallotus apelta stems,the mathematical model established had high prediction accuracy,the method was simple and operability was good. 展开更多
关键词 central composite design/response surface method Mallotus apelta TOTAL FLAVONOIDS
下载PDF
Improvement of xylanase production by Aspergillus niger XY-1 using response surface methodology for optimizing the medium composition 被引量:7
6
作者 Yao-xing XU Yan-li LI Shao-chun XU Yong LIU Xin WANG Jiang-wu TANG 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2008年第7期558-566,共9页
Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and t... Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and the central composite design (CCD) was employed to investigate the individual crucial component of the medium that significantly affected the enzyme yield. Results: Firstly, NaNO3, yeast extract, urea, Na2CO3, MgSO4, peptone and (NH4)2SO4 were screened as the significant factors positively affecting the xylanase production by PBD. Secondly, by valuating the nitrogen sources effect, urea was proved to be the most effective and economic nitrogen source for xylanase production and used for further optimization. Finally, the CCD and response surface methodology (RSM) were applied to determine the optimal concentration of each sig-nificant variable, which included urea, Na2CO3 and MgSO4. Subsequently a second-order polynomial was determined by multiple regression analysis. The optimum values of the critical components for maximum xylanase production were obtained as follows: x1 (urea)=0.163 (41.63 g/L), x2 (Na2CO3)=?1.68 (2.64 g/L), x3 (MgSO4)=1.338 (10.68 g/L) and the predicted xylanase value was 14374.6 U/g dry substrate. Using the optimized condition, xylanase production by Aspergillus niger XY-1 after 48 h fermentation reached 14637 U/g dry substrate with wheat bran in the shake flask. Conclusion: By using PBD and CCD, we obtained the optimal composition for xylanase production by Aspergillus niger XY-1 in SSF, and the results of no additional expensive medium and shortened fermentation time for higher xylanase production show the potential for industrial utilization. 展开更多
关键词 XYLANASE Optimization of medium composition Plackett-Burman design (PBD) central composite design (CCD) response surface methodology (RSM). Aspergillus niger XY- 1
下载PDF
Optimal Evaluation of Coag-Flocculation Factors for Alum-Brewery Effluent System by Response Surface Methodology
7
作者 M.C. Menkiti M.C. Aneke +2 位作者 E.B. Ogbuene O.D. Onukwuli E.O. Ekumankama 《Journal of Minerals and Materials Characterization and Engineering》 2012年第5期543-558,共16页
This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out... This work investigates coag-flocculation optimization treatment of alum-brewery effluent system via response surface methodology (RSM). To minimize suspended and dissolved particles (SDP), experiments were carried out using nephelometric jar test and 23-factorial design with three star-points, six-center-points and two replications. A central composite design, which is the standard design of RSM, was used to evaluate the effects and interactions of three major factors (coagulation pH, coagulant dosage, settling time) on the treatment efficiency. Multivariable quadratic model developed for the response studied indicates the optimum conditions to be 9, 500mg/l and 20minutes for coagulation pH, coagulant dosage and settling time, respectively. At optimum, the SDP was reduced from 10831.490mg/l to 801.451mg/l, representing 92.601% removal efficiency. RSM has demonstrated to be appropriate approach for the optimization of the coag-flocculation process by statistical evaluation. 展开更多
关键词 Coag-flocculation BREWERY EFFLUENT ALUM response surface methodology central composite design
下载PDF
Optimization of medium components using response surface methodology (RSM) for mycelium biomass and exopolysaccharide production by <i>Lentinus squarrosulus</i> 被引量:5
8
作者 Rahayu Ahmad Najeeb Kaid Nasser Al-Shorgani +2 位作者 Aidil Abdul Hamid Wan Mohtar Wan Yusoff Fauzi Daud 《Advances in Bioscience and Biotechnology》 2013年第12期1079-1085,共7页
The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Respo... The interaction between sucrose, yeast extract and initial pH was investigated to optimize critical medium components for mycelium biomass and production of exopolysaccharide (EPS) of Lentinus squarrosulus using Response Surface Methodology (RSM). A central composite design (CCD) was applied and a polynomial regression model with quadratic term was used to analyse the experimental data using analysis of variance (ANOVA). ANOVA analysis showed that the model was very significant (p Lentinus squarrosulus are as follows: sucrose concentration 114.61 g/L, yeast extract 1.62 g/L and initial pH of 5.81;sucrose concentration 115.8 g/L, yeast extract of 3.39 g/L and initial pH of 6.44 respectively. 展开更多
关键词 Lentinus squarrosulus response surface methodology (RSM) EXOPOLYSACCHARIDE SUBMERGED Culture central composite design (CCD)
下载PDF
Enhacement of the Viability of <i>Lactobacillus</i><i>plantarum</i>during the Preservation and Storage Process Based on the Response Surface Methodology 被引量:2
9
作者 Girme Gisela Arosemena Esteban Leonardo +3 位作者 Perez Lucia Vera Rodrigo Grau Eduard Calvo M. Angeles 《Food and Nutrition Sciences》 2014年第18期1746-1755,共10页
Objective: The Response Surface Methodology (RSM) is a commonly used system to optimize cell viability of probiotic strains when they are subjected to different preservation and storage processes. Methods and Results:... Objective: The Response Surface Methodology (RSM) is a commonly used system to optimize cell viability of probiotic strains when they are subjected to different preservation and storage processes. Methods and Results: To determine the optimal levels of incorporation of several cry oprotectants (skim milk, sucrose and trehalose) in the freeze-drying process of Lactobacillus plantarum, a range of experiments based on a Rotational Central Composite design (CCD) were conducted. The results were adjusted to a quadratic model, resulting in the presence of interaction between the different variables. Solving a regression equation, we obtained the optimum concentrations of cryoprotective agents: 24.06% milk powder, 6.22% sucrose, 5.63% trehalose. To visualize the interactions between the three variables involved in the study, Design Expert? software was used. Conclusions: The analysis reveals that while trehalose has a direct effect on the viability of L. plantarum, skim milk and sucrose exert quadratic effects. There are also interactions between cryoprotectants, which emphasize the synergies produced between milk and sucrose and between sucrose and trehalose, which allows maintaining the viability of L. plantarum. Significance and Impact of the Study: The addition of new oligosaccharides as trehalose in premixtures for functional feed can maintain the viability of L. plantarum during longer periods of time, ensuring the proper administration of probiotics to their destinations. 展开更多
关键词 CRYOPROTECTANTS FREEZE-DRYING PROCESS Probiotics response surface methodology central composite design
下载PDF
Optimization of Dielectric Barrier Discharge Process for Decolorization of Reactive Blue 19 by Means of Response Surface Methodology
10
作者 SUN Yu JIA Xiaofeng ZHENG Binguo 《Journal of Donghua University(English Edition)》 EI CAS 2019年第6期573-579,共7页
The decolorization of reactive blue 19(RB-19)as a model dye from aqueous solutions has been studied by means of the dielectric barrier discharge(DBD)process.The independent parameters of input power,initial dye concen... The decolorization of reactive blue 19(RB-19)as a model dye from aqueous solutions has been studied by means of the dielectric barrier discharge(DBD)process.The independent parameters of input power,initial dye concentration and initial pH value were evaluated respectively.Experimental data were optimized by means of a 33 factorial design and response surface methodology(RSM).The dye was quickly removed during the treatment,yielding 96.9%of decolorization efficiency under optimized conditions.Therefore,the total organic carbon(TOC)and chemical oxygen demand(CODcr)results indicated that only the chromophore was destroyed rather than completed oxidation.This was confirmed with UV-vis and tertiary butanol assessments during the DBD treatment. 展开更多
关键词 dielectric BARRIER discharge(DBD) reactive BLUE 19(RB-19) response surface methodology(RSM) central composite design(CCD)
下载PDF
Analysis of Density of Sintered Iron Powder Component Using the Response Surface Method
11
作者 Prasanta Kumar Bardhan Suprs Patra Goutam Sutradhar 《Materials Sciences and Applications》 2010年第3期152-157,共6页
The continued growth of ferrous powder metallurgy in automobile and others engineering application is largely de-pendent on the development of higher density materials and improved mechanical properties. Since density... The continued growth of ferrous powder metallurgy in automobile and others engineering application is largely de-pendent on the development of higher density materials and improved mechanical properties. Since density is a predominant factor in the performance of powder metallurgy components, it has been primarily considered for the present investigation. An experimental investigation have been undertaken in order to understand the variation of density with respect to the variation of process parameters viz., compaction load, sinter temperature and sintering time. The relation among the various process parameters with density has been observed. A mathematical model has been developed using second order response surface model (RSM) with central composite design (CCD) considering the above mentioned process parameters. The developed mathematical model would help in predicting the variation in density with the change in the level of different parameters influencing the density variation. This model also can be useful for setting of optimum value of the parameters for achieving the target density. 展开更多
关键词 POWDER METALLURGY DENSITY SINTERING response surface Model central composite design
下载PDF
Optimization of the Impeller Geometry for an Automotive Torque Converter Using Response Surface Methodology and Desirability Function
12
作者 Xiang Chen Jie Chen 《Open Journal of Applied Sciences》 2020年第7期455-475,共21页
Response surface methodology (RSM) based on desirability function approach (DFA) is applied to obtain an optimal design of the impeller geometry for an automotive torque converter. <span style="font-family:Ver... Response surface methodology (RSM) based on desirability function approach (DFA) is applied to obtain an optimal design of the impeller geometry for an automotive torque converter. <span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">The relative importance of six design parameters including impeller blade number, blade thickness, bias angle, scroll angle, inlet angle and exit angle is investigated using orthogonal design approach. </span></span></span></span><span><span><span style="font-family:""><span style="font-family:Verdana;">The impeller inlet angle, exit angle and bias angle </span><span style="font-family:Verdana;">are found to exert the greatest influence on the overall performance of a torque converter, with two flow area factors being considered, namely 17% and 20%. Then, RSM together with central composite design (CCD) method is used to in-depth evaluate the interaction effect of the three key parameters on converter performance. The results demonstrate that </span><span style="font-family:Verdana;">impeller exit angle has the strongest impact on peak efficiency</span><span style="font-family:Verdana;">, with larger angles yielding the most favorable results. The stall torque ratio maximization is attainable with the increase of impeller bias angle and inlet angle together with smaller exit angle. In the end, </span><span style="font-family:Verdana;">an optimized design for the impeller geometry is obtained with stall torque ratio and peak efficiency increased by 1.62% and 1.1%, respectively.</span><span style="font-family:Verdana;"> The new optimization method can be used as a reference for performance enhancement in the design process of impeller geometry for an automotive torque converter.</span></span></span></span> 展开更多
关键词 Automotive Torque Converter response surface methodology Desirability Function Approach central composite design OPTIMIZATION
下载PDF
Central Composite Design响应面法优化厚裂凤仙花总黄酮提取工艺研究
13
作者 文琴琴 徐梅 +3 位作者 严福林 张浪 周雅雪 魏升华 《广东化工》 CAS 2022年第3期72-75,78,共5页
为厚裂凤仙花中总黄酮资源的开发利用,本文采用单因素与星点-效应面法相结合的方式,考察提取溶剂浓度、料液比、提取时间、提取次数对厚裂凤仙花中总黄酮提取率的影响。优选出厚裂凤仙花总黄酮最佳提取方法为:甲醇体积分数80%,料液比为1... 为厚裂凤仙花中总黄酮资源的开发利用,本文采用单因素与星点-效应面法相结合的方式,考察提取溶剂浓度、料液比、提取时间、提取次数对厚裂凤仙花中总黄酮提取率的影响。优选出厚裂凤仙花总黄酮最佳提取方法为:甲醇体积分数80%,料液比为1︰64,提取时间为50 min;提次数为3次;验证实验结果表明,总黄酮平均提取率为5.51 mg/g,与实验模型RSD值为0.79%。建立的模型与实际方案有较高拟合度,可作为苗药厚裂凤仙花总黄酮提取工艺参数。 展开更多
关键词 厚裂凤仙花 总黄酮 central composite Desig响应面法 提取工艺
下载PDF
Optimization of Jiawei Qing'e Oral Fast Disintegrating Tablets Based on Response Surface-Central Composite Design 被引量:3
14
作者 ZHANG Wei-ling WANG Ya-jing +4 位作者 GAO Xiu-mei GAO Xu PENG Shu-juan ZHENG Yin OKEKE Chukwunweike Ikechukwu 《Chinese Herbal Medicines》 CAS 2013年第2期138-144,共7页
Abstract: Objective To apply the response surface-central composite design to developing and optimizing the oral fastdisintegrating tablets (ODT) formulation for Jiawei Qing’e, a kind of prescription of Chinese herba... Abstract: Objective To apply the response surface-central composite design to developing and optimizing the oral fastdisintegrating tablets (ODT) formulation for Jiawei Qing’e, a kind of prescription of Chinese herbal medicine.Methods The bitterness of Jiawei Qing’e was masked using Eudragit E-100 by solvent evaporation technique.Response surface approach was applied to investigating the interaction of formulation parameters in optimizing theformulation. The independent variables were Eudragit E-100/drug ratio (X1), amount of disintegrants (X2), and theamount of diluents (X3). The disintegration time (Y1), hardness (Y2), and weight variations of the tablets werecharacterized. Results The models predicted levels of X1= 4.63%, X2= 5.25%, and X3= 34.33%, for the optimalformulation having a hardness of 3.0 kg with the disintegration time of 30 s within experimental region. The observedresponse of Y1= 26.5 s and Y2= 3.14 kg reasonably agreed with the predicted response. Conclusion Responsesurface methodology shows the good predictability and reliability in optimizing the formulation. The optimized ODTof Jiawei Qing’e has acceptable taste, rapid disintegrating ability, and good mechanical strength. 展开更多
关键词 Chinese herbal medicine oral fast disintegrating tablets response surface-central composite design solvent evaporation technique taste masking
原文传递
基于星点设计-效应面法联用正交设计优选抗骨质疏松颗粒的制剂工艺
15
作者 季欧 范依霖 +4 位作者 骆巧媚 洪冉 孙小丽 仲瑞雪 段小云 《西北药学杂志》 CAS 2024年第2期107-112,共6页
目的用星点设计-效应面法(CCD-RSM)联用正交实验设计优选抗骨质疏松颗粒的制剂工艺。方法以溶媒用量、煎煮时间为考察因素,以有效成分补骨脂素、异补骨脂素总量和干膏收率的总评“归一值”(optical density,OD)为评价指标,用CCDRSM确定... 目的用星点设计-效应面法(CCD-RSM)联用正交实验设计优选抗骨质疏松颗粒的制剂工艺。方法以溶媒用量、煎煮时间为考察因素,以有效成分补骨脂素、异补骨脂素总量和干膏收率的总评“归一值”(optical density,OD)为评价指标,用CCDRSM确定最佳提取工艺;以颗粒溶化性、吸湿率、水分、成型率、休止角为评价指标,用正交实验优选最佳成型工艺。结果最佳提取工艺为加水量12倍,提取2次,每次130 min;成型工艺为浸膏与辅料的比例为1∶2,可溶性淀粉与糊精的比例为1∶3,用体积分数为90%的乙醇制粒,75℃干燥,过16目筛整粒,即得。结论优选的制剂工艺条件稳定、可行,可为抗骨质疏松颗粒的实际生产提供依据。 展开更多
关键词 抗骨质疏松颗粒 补骨脂素 异补骨脂素 星点设计-效应面法 正交实验设计
下载PDF
星点设计-效应面法优化白及多糖pH-离子敏感原位凝胶的处方
16
作者 张忠 范依霖 +3 位作者 薛宝玉 蒋琳 仲瑞雪 涂禾 《广东药科大学学报》 CAS 2024年第2期70-75,共6页
目的优化白及多糖pH-离子敏感原位凝胶的处方。方法以去乙酰结冷胶用量、海藻酸钠用量、氯化钙用量、枸橼酸钠与氯化钙的质量比为考察变量,采用单因素实验初步确定各变量的范围。以25℃凝胶前体溶液黏度和37℃胶凝黏度为考察指标,采用... 目的优化白及多糖pH-离子敏感原位凝胶的处方。方法以去乙酰结冷胶用量、海藻酸钠用量、氯化钙用量、枸橼酸钠与氯化钙的质量比为考察变量,采用单因素实验初步确定各变量的范围。以25℃凝胶前体溶液黏度和37℃胶凝黏度为考察指标,采用星点设计-效应面法优选白及多糖pH-离子敏感原位凝胶的处方工艺,并进行预测分析。结果白及多糖pH敏感原位凝胶的最优处方为:去乙酰结冷胶用量为0.50%,海藻酸钠用量为1.10%,氯化钙用量为0.07%,枸橼酸钠与氯化钙的质量比为4∶1。该处方条件下,25℃前体溶液黏度为(704.00±3.00)mPa·s,37℃胶凝黏度为(12544.70±47.33)mPa·s。结论白及多糖pH-离子敏感原位凝胶稳定性好,前体溶液在25℃流动性良好,凝胶强度良好,可为基于白及多糖原位凝胶的后续研究提供实验基础。 展开更多
关键词 星点设计-效应面法 白及多糖 pH敏感原位凝胶 黏度测定
下载PDF
层次分析-熵权法联合星点设计-响应面法优选胆汁制陈皮炮制工艺及饮片色度与成分相关性分析 被引量:1
17
作者 吴乙庚 祝婧 +3 位作者 姚东 陈泣 王林艳 谌瑞林 《中国中医药信息杂志》 CAS CSCD 2024年第5期118-124,共7页
目的研究胆汁制陈皮炮制的最佳工艺参数,明确饮片色度与主要成分之间的关系。方法采用星点设计-响应面法,以辅料用量、蒸制时间、干燥时间、干燥温度为考察因素,以橙皮苷、川陈皮素、橘皮素、牛磺胆酸钠含量及外观性状、醇浸出物含量为... 目的研究胆汁制陈皮炮制的最佳工艺参数,明确饮片色度与主要成分之间的关系。方法采用星点设计-响应面法,以辅料用量、蒸制时间、干燥时间、干燥温度为考察因素,以橙皮苷、川陈皮素、橘皮素、牛磺胆酸钠含量及外观性状、醇浸出物含量为评价指标,采用层次分析-熵权法对各评价指标赋予相应权重,计算总评归一值,优选最佳炮制工艺;采用相关性分析和回归分析研究饮片色度与主要有效成分含量的相关性,构建色度-成分的回归方程。结果胆汁制陈皮最佳炮制工艺为每100g陈皮用20g蛇胆汁浸渍完全后,蒸制15min,45℃干燥162min。饮片色度值L^(*)、b^(*)值与橙皮苷、川陈皮素、橘皮素、牛磺胆酸钠4种成分含量均具有显著相关性,a^(*)值仅与牛磺胆酸钠含量具有相关性;构建了L^(*)、b^(*)值与4种成分含量及a^(*)值与牛磺胆酸钠含量的线性回归方程。结论采用星点设计-响应面法优化的胆汁制陈皮炮制工艺具有合理性、可行性,饮片色度与成分含量具有显著相关性。 展开更多
关键词 胆汁制陈皮 炮制 星点设计-响应面法 层次分析-熵权法 色度 成分 相关性
下载PDF
星点设计-效应面法优选复方山陈颗粒成型工艺 被引量:1
18
作者 钟以凝 董琳琳 +3 位作者 彭金清 陆思 秦晓雪 陈卫卫 《长春中医药大学学报》 2024年第8期864-868,共5页
目的优选复方山陈颗粒的成型工艺。方法单因素试验筛选出稠膏的相对密度、稀释剂总用量为考察因素,以颗粒的成型率、休止角、水分和溶化性为评价指标,采用星点设计-效应面法(CCD-RSM)优选复方山陈颗粒的最佳成型工艺。结果最佳成型工艺... 目的优选复方山陈颗粒的成型工艺。方法单因素试验筛选出稠膏的相对密度、稀释剂总用量为考察因素,以颗粒的成型率、休止角、水分和溶化性为评价指标,采用星点设计-效应面法(CCD-RSM)优选复方山陈颗粒的最佳成型工艺。结果最佳成型工艺条件为取相对密度为1.25(60℃)的稠膏与稀释剂(甘露醇:糊精=1:3)按1:3的比例混匀,制软材,过16目筛制粒,在60℃下干燥约1 h,整粒,即得。结论通过CCD-RSM优选的工艺稳定可靠,可为复方山陈颗粒的产业化生产提供参考。 展开更多
关键词 复方山陈颗粒 星点设计-效应面法 成型工艺
下载PDF
星点设计-效应面法优化仑伐替尼混合胶束的制备工艺
19
作者 凯丽比努尔·奥布力艾散 李倩 +2 位作者 谢志 贾文彦 尹东锋 《药学实践与服务》 CAS 2024年第11期495-502,共8页
目的优化仑伐替尼混合胶束的处方及其制备工艺。方法以Pluronic P123和F127作为载体材料,通过薄膜水化法制备仑伐替尼混合胶束。利用单因素实验和星点设计-效应面法筛选出最优处方并对其物理性质进行初步表征。结果优化后的最佳处方和... 目的优化仑伐替尼混合胶束的处方及其制备工艺。方法以Pluronic P123和F127作为载体材料,通过薄膜水化法制备仑伐替尼混合胶束。利用单因素实验和星点设计-效应面法筛选出最优处方并对其物理性质进行初步表征。结果优化后的最佳处方和工艺条件为:P123质量百分比80%、载体材料用量90 mg、投药量10 mg、水化体积6 ml、水化时间45 min、旋蒸温度55℃。制备得到的仑伐替尼混合胶束的平均粒径为(104.0±0.32)nm,PDI为0.22±1.19,Zeta电位为(-2.56±0.81)mV,平均包封率为83.33%±0.30%,平均载药量为8.67%±0.07%。胶束形态为分布均一的规整球形,并显示出一定的缓释性能。结论该研究开发的制备工艺简单可行,所得载药胶束具有较高的载药量和包封率且释放稳定,为仑伐替尼混合胶束的进一步研究和开发提供了有价值的参考。 展开更多
关键词 仑伐替尼 混合胶束 薄膜水化法 星点设计-效应面法
下载PDF
星点设计-效应面法优化超声提取桂籽中三萜化合物的工艺研究
20
作者 杨洪飞 卢雨菲 +5 位作者 葛婷婷 王洁琼 陈祺 孟丽媛 要辉 闵清 《湖北科技学院学报(医学版)》 2024年第3期214-220,共7页
目的本研究以桂籽为原材料,采用星点设计(CCD)-效应面法(RSM)等多种方法优化桂籽总三萜(OFSTT)的提取工艺及其含量测定研究。方法采用单因素、Plackett-Burman(PB)、最陡爬坡和CCD-RSM实验,建立各因素与响应值之间的数学模型,确定OFSTT... 目的本研究以桂籽为原材料,采用星点设计(CCD)-效应面法(RSM)等多种方法优化桂籽总三萜(OFSTT)的提取工艺及其含量测定研究。方法采用单因素、Plackett-Burman(PB)、最陡爬坡和CCD-RSM实验,建立各因素与响应值之间的数学模型,确定OFSTT的最佳超声提取工艺。结果通过单因素试验,得到了关于桂籽总三萜含量变化的趋势线,进一步利用PB实验筛选出对OFSTT产生显著影响的因素(提取功率、液料比及提取次数),通过最陡爬坡实验设计出极值点,以此作为效应面设计的中心点,采用星点设计-效应面法优化了OFSTT提取工艺的最佳提取工艺条件:乙醇溶剂分数60%,液料比25∶1(mL/g),提取温度65℃,提取功率325W,提取时间30min,提取3次;该条件下OFSTT的提取率为7.251%,实际值与预测值的偏差为2.05%。结论本研究采用CCD-RSM实验优化了OFSTT的提取工艺,该工艺稳定,提取率较高,实际值与预测值吻合度高,为后续桂籽三萜类物质进一步结构鉴定及生物活性作用研究提供参考价值。 展开更多
关键词 桂籽总三萜 提取工艺 星点设计-效应面法
下载PDF
上一页 1 2 67 下一页 到第
使用帮助 返回顶部