Direct Digital Frequency Control Based on the Phase Step Change Characteristic between Signals

We present a new digital phase lock technology to achieve the frequency control and transformation through high precision multi-cycle group synchronization between signals without the frequency transformation circuit. In the case of digital sampling, the passing zero point of the phase of the controlled signal has the phase step characteristic, the phase step of the passing zero point is monotonic continuous with high resolution in the phase lock process, and using the border effect of digital fuzzy area, the gate can synchronize with the two signals, the quantization error is reduced. This technique is quite different from the existing methods of frequency transformation and frequency synthesis, the phase change characteristic between the periodic signals with different nominal is used. The phase change has the periodic phenomenon, and it has the high resolution step value. With the application of the physical law, the noise is reduced because of simplifying frequency transformation circuits, and the phase is locked with high precision. The regular phase change between frequency signals is only used for frequency measurement, and the change has evident randomness, but this randomness is greatly reduced in frequency control, and the certainty of the process result is clear. The experiment shows that the short term frequency stability can reach 10-12/s orders of magnitude.

Step-Loading Characteristics of Gas Engine Cogeneration System Using Doubly-Fed Induction Generator in Stand-Alone Operation

Application of a DFIG （doubly-fed induction generator）, which is one of adjustable speed generators, to a gas engine cogeneration system has been investigated. To operate during a blackout as an emergency power supply is one of important roles for the gas engine eogeneration system. In the case of conventional constant speed of synchronous generator, the amount of the allowed step load is limited to around 30% of the rated power. On the other hand, DFIG is expected to increase the amount of step load during the stand-alone operation. In this paper, it has been demonstrated that an increase in the gas engine speed resulted in an increase in the maximum amount of step load using experimental equipment with a real gas engine. It has been concluded that the proposed system can improve the performance of an emergency power supply at step-loading.

Runoff Responses to Climate Change in Arid Region of Northwestern China During 1960-2010

Based on runoff, air temperature, and precipitation data from 1960 to 2010, the effects of climate change on water resources in the arid region of the northwestern China were investigated. The long-term trends of hydroclimatic variables were studied by using both Mann-Kendall test and distributed-free cumulative sum （CUSUM） chart test. Results indicate that the mean annual air temperature increases significantly from 1960 to 2010. The annual precipitation exhibits an increasing trend, especially in the south slope of the Tianshan Mountains and the North Uygur Autonomous Region of Xinjiang in the study period. Step changes occur in 1988 in the mean annual air temperature time series and in 1991 in the precipitation time series. The runoff in different basins shows different trends, i.e., significantly increasing in the Kaidu River, the Aksu River and the Shule River, and decreasing in the Shiyang River. Correlation analy- sis reveals that the runoff in the North Xinjiang （i.e., the Weigan River, the Heihe River, and the Shiyang River） has a strong positive relationship with rainfall, while that in the south slope of the Tianshan Mountains, the middle section of the north slope of the Tianshan Mountains and the Shule River has a strong positive relationship with air temperature. The trends of rtmoff have strong negative correla- tions with glacier coverage and the proportion of glacier water in runoff. From the late 1980s, the climate has become warm and wet in the arid region of the northwestern China. The change in runoff is interacted with air temperature, precipitation and glacier coverage. The results show that streamflow in the arid region of the northwestern China is sensitive to climate change, which can be used as a reference for regional water resource assessment and management.

An Upwind Mixed Volume Element-Fractional Step Method on a Changing Mesh for Compressible Contamination Treatment from Nuclear Waste

In this paper the authors discuss the numerical simulation problem of threedimensional compressible contamination treatment from nuclear waste.The mathematical model is defined by an initial-boundary nonlinear convection-diffusion system of four partial differential equations:a parabolic equation for the pressure,two convection-diffusion equations for the concentrations of brine and radionuclide and a heat conduction equation for the temperature.The pressure appears within the concentration equations and heat conduction equation,and the Darcy velocity controls the concentrations and the temperature.The pressure is solved by the conservative mixed volume element method,and the order of the accuracy is improved by the Darcy velocity.The concentration of brine and temperature are computed by the upwind mixed volume element method on a changing mesh,where the diffusion is discretized by a mixed volume element and the convection is treated by an upwind scheme.The composite method can solve the convection-dominated diffusion problems well because it eliminates numerical dispersion and nonphysical oscillation and has high order computational accuracy.The mixed volume element has the local conservation of mass and energy,and it can obtain the brine and temperature and their adjoint vector functions simultaneously.The conservation nature plays an important role in numerical simulation of underground fluid.The concentrations of radionuclide factors are solved by the method of upwind fractional step difference and the computational work is decreased by decomposing a three-dimensional problem into three successive one-dimensional problems and using the method of speedup.By the theory and technique of a priori estimates of differential equations,we derive an optimal order result in L^(2) norm.Numerical examples are given to show the effectiveness and practicability and the composite method is testified as a powerful tool to solve the well-known actual problem.

The Co-seismic Response of Underground Fluid in Yunnan to the Nepal MS8.1 Earthquake

In this paper,statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8. 1 earthquake,and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8. 1 earthquake had greater impact on the Yunnan region,and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level,and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake,the higher ratio of the occurrence of co-seismic response,and in the same well,the larger the response amplitude,as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different. Water temperature co-seismic response almost occurred in wells with water level response,indicating that the well water level and water temperature are closely related in co-seismic response,and the well water temperature seismic response was caused mainly by well water level seismic response.

A step parameters prediction model based on transfer process neural network for exhaust gas temperature estimation after washing aero-engines

The prediction of Exhaust Gas Temperature Margin(EGTM)after washing aeroengines can provide a theoretical basis for airlines not only to evaluate the energy-saving effect and emission reduction,but also to formulate reasonable maintenance plans.However,the EGTM encounters step changes after washing aeroengines,while,in the traditional models,a persistence tendency exists between the prediction results and the previous data,resulting in low accuracy in prediction.In order to solve the problem,this paper develops a step parameters prediction model based on Transfer Process Neural Networks(TPNN).Especially,“step parameters”represent the parameters that can reflect EGTM step changes.They are analyzed in this study,and thus the model concentrates on the prediction of step changes rather than the extension of data trends.Transfer learning is used to handle the problem that few cleaning records result in few step changes for model learning.In comparison with Long Short-Term Memory(LSTM)and Kernel Extreme Learning Machine(KELM)models,the effectiveness of the proposed method is verified on CFM56-5B engine data.