By using physical vapor deposition(PVD)to grow metallic nanorods,the characteristic length is controllable,which can be identified by two different growth modes:Mode I and Mode II.In Mode I,the growth of metallic nano...By using physical vapor deposition(PVD)to grow metallic nanorods,the characteristic length is controllable,which can be identified by two different growth modes:Mode I and Mode II.In Mode I,the growth of metallic nanorods is dominated by the monolayer surface steps.Whereas in Mode II,the growth mechanism is mainly determined by the multilayer surface steps.In this work,we focused on the analysis of the physical process of Mode I,in which the adatoms diffuse on the monolayer surface at beginning,then diffuse down to the next monolayer surface,and finally result in the metallic nanorods growth.Based on the physical process,both the variations of the characteristic length and the numerical solutions were theoretically proposed.In addition,the twodimensional(2 D)lattice kinetic Monte Carlo simulations were employed to verify the theoretical derivation of the metallic nanorods growth.Our results pay a new way for modifying the performance of metallic nanorods-based applications and devices.展开更多
In this study,the main properties of the hydraulic jump in an asymmetric trapezoidal flume are analyzed experimentally,including the so-called sequent depths,characteristic lengths,and efficiency.In particular,an asym...In this study,the main properties of the hydraulic jump in an asymmetric trapezoidal flume are analyzed experimentally,including the so-called sequent depths,characteristic lengths,and efficiency.In particular,an asymmetric trapezoidal flume with a length of 7 m and a width of 0.304 m is considered,with the bottom of the flume transversely inclined at an angle of m=0.296 and vertical lateral sides.The corresponding inflow Froude number is allowed to range in the interval(1.40<F1<6.11).The properties of this jump are compared to those of hydraulic jumps in channels with other types of cross-sections.A relationship for calculating hydraulic jump efficiency is proposed for the considered flume.For F1>5,the hydraulic jump is found to be more effective than that occurring in triangular and symmetric trapezoidal channels.Also,when■mes>8 and■>5,the hydraulic jump in the asymmetrical trapezoidal channel downstream of a parallelogram sluice gate is completely formed as opposed to the situation where a triangular sluice is considered.展开更多
<strong>Background:</strong> Allometric scaling is a well-known research tool used for the metabolic rates of organisms. It measures the living systems with fractal physiology. The metabolic rate versus th...<strong>Background:</strong> Allometric scaling is a well-known research tool used for the metabolic rates of organisms. It measures the living systems with fractal physiology. The metabolic rate versus the mass of the living species has a definite scaling and behaves like a four-dimensional phenomenon. The extended investigations focus on the mass-dependence of the various physiological parameters.<strong> Objective: </strong>Proving the length of vascularization is the scaling parameter instead of mass in allometric relation. <strong>Method:</strong> The description of the energy balance of the ontogenic growth of the tumor is an extended cell-death parameter for studying the mass balance at the cellular level. <strong>Results:</strong> It is shown that when a malignant cellular cluster tries to maximize its metabolic rate, it changes its allometric scaling exponent. A growth description could follow the heterogenic development of the tumor. The mass in the allometric scaling could be replaced by the average length of the circulatory system in each case. <strong>Conclusion:</strong> According to this concept, the dependence of the mass in allometric scaling is replaced with a more fundamental parameter, the length character of the circulatory system. The introduced scaling parameter has primary importance in cancer development, where the elongation of the circulatory length by angiogenesis is in significant demand.展开更多
The capacity of energy absorption by fault bands after rock burst wascalculated quantitatively according to shear stress-shear deformation curves considering theinteractions and interplaying among microstructures due ...The capacity of energy absorption by fault bands after rock burst wascalculated quantitatively according to shear stress-shear deformation curves considering theinteractions and interplaying among microstructures due to the heterogeneity of strain softeningrock materials. The post-peak stiffness of rock specimens subjected to direct shear was derivedstrictly based on gradient-dependent plasticity, which can not be obtained from the classicalelastoplastic theory. Analytical solutions for the dissipated energy of rock burst were proposedwhether the slope of the post-peak shear stress-shear deformation curve is positive or not. Theanalytical solutions show that shear stress level, confining pressure, shear strength, brittleness,strain rate and heterogeneity of rock materials have important influence on the dissipated energy.The larger value of the dissipated energy means that the capacity of energy dissipation in the formof shear bands is superior and a lower magnitude of rock burst is expected under the condition ofthe same work done by external shear force. The possibility of rock burst is reduced for a lowersoftening modulus or a larger thickness of shear bands.展开更多
Three dimensional wave-induced mixing plays an important role in shallow water area. A quite direct approach through the Reynolds average upon characteristic length scale is proposed to parameterize the horizontal and...Three dimensional wave-induced mixing plays an important role in shallow water area. A quite direct approach through the Reynolds average upon characteristic length scale is proposed to parameterize the horizontal and vertical shallow water mixing. Comparison of finite depth case with infinite depth results indicates that the difference of the wave-induced mixing strength is evident. In the shallow water condition, the infinite water depth approximation overestimates the mixing strength in the lower layers. The nonzero horizontal wave-induced mixing presents anisotropic property near the shore. The Prandtl's mixing length theory underestimated the wave-induced mixing in the previous studies.展开更多
Fracture energy in strain softening regime was investigated analytically by considering microstructures interaction and interplay.Based on gradient-dependent plasticity, the thickness of localized band was determined ...Fracture energy in strain softening regime was investigated analytically by considering microstructures interaction and interplay.Based on gradient-dependent plasticity, the thickness of localized band was determined completely and strictly by characteristic length in relation to average grain diameter.After obtaining the plastic shear displacement of the band,the formula on axial response of concrete was proposed and the analytical post-peak fracture energy was deduced.A comparison between present theoretical results and earlier experimental results was carried out and the analytical result is reasonable and has a plausible foundation as considering the localized failure theoretically.Decreasing the relative stress leads to increasing the fracture energy non-linearly.The larger the shear elastic modulus and shear softening modulus,the lower the post-peak fracture energy.A larger fracture energy is caused by a larger thickness of shear band or a larger characteristic length of concrete material.If the inclination angle of the shear band and the compressive strength are not concerned with structural size of specimen,the post-peak fracture energy is size independent.展开更多
Eringen’s two-phase local/nonlocal model is applied to an Euler-Bernoulli nanobeam considering the bending-induced axial force, where the contribution of the axial force to bending moment is calculated on the deforme...Eringen’s two-phase local/nonlocal model is applied to an Euler-Bernoulli nanobeam considering the bending-induced axial force, where the contribution of the axial force to bending moment is calculated on the deformed state. Basic equations for the corresponding one-dimensional beam problem are obtained by degenerating from the three-dimensional nonlocal elastic equations. Semi-analytic solutions are then presented for a clamped-clamped beam subject to a concentrated force and a uniformly distributed load, respectively. Except for the traditional essential boundary conditions and those required to be satisfied by transferring an integral equation to its equivalent differential form, additional boundary conditions are needed and should be chosen with great caution, since numerical results reveal that non-unique solutions might exist for a nonlinear problem if inappropriate boundary conditions are used. The validity of the solutions is examined by plotting both sides of the original integro-differential governing equation of deflection and studying the error between both sides. Besides, an increase in the internal characteristic length would cause an increase in the deflection and axial force of the beam.展开更多
In our previous work,we endowed a new physical meaning of self-diffusion coefficient in Fick’s law,which proposed that the diffusion coefficient can be described as the product of the characteristic length and the di...In our previous work,we endowed a new physical meaning of self-diffusion coefficient in Fick’s law,which proposed that the diffusion coefficient can be described as the product of the characteristic length and the diffusion velocity.To testify this simple theory,in this work,we further investigated the underlying mechanism of the characteristic length and the diffusion velocity at the molecular level.After a complete dynamic run,the statistical average diffusion velocity and the characteristic length of molecules can be obtained by scripts,and subsequently the diffusion coefficient was determined by our proposed theory.The diffusion processes in 35 systems with a wide range of pressure and concentration variations were simulated using this model.From the simulated results,diffusion coefficients from our new model matched well with the experimental results from literatures.The total average relative deviation of predicted values with respect to the experimental results is 8.18%,indicating that the novel model is objective and rational.Compared with the traditional MSD-t model,this novel diffusion coefficient model provides more reliable results,and the theory is simple and straightforward in concept.Additionally,the effect of gas pressure and liquid concentration on the diffusion behavior were discussed,and the microscopic diffusion mechanism was elucidated through the distribution of diffusion velocity and the characteristic length analysis.Moreover,we suggested new distribution functions,providing more reliable data theoretical foundations for the future research about the diffusion coefficient.展开更多
User-transformer relations are significant to electric power marketing,power supply safety,and line loss calculations.To get accurate user-transformer relations,this paper proposes an identification method for user-tr...User-transformer relations are significant to electric power marketing,power supply safety,and line loss calculations.To get accurate user-transformer relations,this paper proposes an identification method for user-transformer relations based on improved quantum particle swarm optimization(QPSO)and Fuzzy C-Means Clustering.The main idea is:as energymeters at different transformer areas exhibit different zero-crossing shift features,we classify the zero-crossing shift data from energy meters through Fuzzy C-Means Clustering and compare it with that at the transformer end to identify user-transformer relations.The proposed method contributes in three main ways.First,based on the fuzzy C-means clustering algorithm(FCM),the quantum particle swarm optimization(PSO)is introduced to optimize the FCM clustering center and kernel parameters.The optimized FCM algorithm can improve clustering accuracy and efficiency.Since easily falls into a local optimum,an improved PSO optimization algorithm(IQPSO)is proposed.Secondly,considering that traditional FCM cannot solve the linear inseparability problem,this article uses a FCM(KFCM)that introduces kernel functions.Combinedwith the IQPSOoptimization algorithm used in the previous step,the IQPSO-KFCM algorithm is proposed.Simulation experiments verify the superiority of the proposed method.Finally,the proposed method is applied to transformer detection.The proposed method determines the class members of transformers and meters in the actual transformer area,and obtains results consistent with actual user-transformer relations.This fully shows that the proposed method has practical application value.展开更多
The current study performed a finite element analysis of the strain localization behavior of a voided ductile material using a non-local plasticity formulation in which the yield strength depends on both an equivalent...The current study performed a finite element analysis of the strain localization behavior of a voided ductile material using a non-local plasticity formulation in which the yield strength depends on both an equivalent plastic strain measurement (hardening parameter) and Laplacian equivalent. The introduction of gradient terms to the yield function was found to play an important role in simulating the strain localization behavior of the voided ductile material. The effect of the mesh size and characteristic length on the strain localization were also investigated. An FEM simulation based on the proposed non-local plasticity revealed that the load-strain curves of the voided ductile material subjected to plane strain tension converged to one curve, regardless of the mesh size. In addition, the results using non-local plasticity also exhibited that the dependence of the deformation behavior of the material on the mesh size was much less sensitive than that with classical local plasticity and could be succe展开更多
The transition features of the wake behind a uniform circular cylinder at \%Re\%=200, which is just beyond the critical Reynolds number of 3\|D transition, are investigated in detail by direct numerical simulations of...The transition features of the wake behind a uniform circular cylinder at \%Re\%=200, which is just beyond the critical Reynolds number of 3\|D transition, are investigated in detail by direct numerical simulations of 3\|D incompressible Navier\|Stokes equations. The spanwise characteristic length determines the transition features and global properties of the wake.展开更多
The fatigue life prediction of high strength steel SUS 630 (H900) under high cycle loading is conducted with consideration of a characteristic fatigue length of material. Based on the WShler curve of smooth material...The fatigue life prediction of high strength steel SUS 630 (H900) under high cycle loading is conducted with consideration of a characteristic fatigue length of material. Based on the WShler curve of smooth materials, a modified method for fatigue life prediction is approached. The characteristic fatigue length of material under cyclic loading is associated with the polycrystalline material. Rather than the stress at a point, the average stress within the characteristic fatigue length is implemented for the fatigue life prediction. The method can be applied to both the smooth and the defected material. The fatigue life prediction is also verified experimentally by specimens with various small circular holes. Through the comparison, it is found that the method can be adopted to predict the fatigue lives with different size effects.展开更多
文摘By using physical vapor deposition(PVD)to grow metallic nanorods,the characteristic length is controllable,which can be identified by two different growth modes:Mode I and Mode II.In Mode I,the growth of metallic nanorods is dominated by the monolayer surface steps.Whereas in Mode II,the growth mechanism is mainly determined by the multilayer surface steps.In this work,we focused on the analysis of the physical process of Mode I,in which the adatoms diffuse on the monolayer surface at beginning,then diffuse down to the next monolayer surface,and finally result in the metallic nanorods growth.Based on the physical process,both the variations of the characteristic length and the numerical solutions were theoretically proposed.In addition,the twodimensional(2 D)lattice kinetic Monte Carlo simulations were employed to verify the theoretical derivation of the metallic nanorods growth.Our results pay a new way for modifying the performance of metallic nanorods-based applications and devices.
文摘In this study,the main properties of the hydraulic jump in an asymmetric trapezoidal flume are analyzed experimentally,including the so-called sequent depths,characteristic lengths,and efficiency.In particular,an asymmetric trapezoidal flume with a length of 7 m and a width of 0.304 m is considered,with the bottom of the flume transversely inclined at an angle of m=0.296 and vertical lateral sides.The corresponding inflow Froude number is allowed to range in the interval(1.40<F1<6.11).The properties of this jump are compared to those of hydraulic jumps in channels with other types of cross-sections.A relationship for calculating hydraulic jump efficiency is proposed for the considered flume.For F1>5,the hydraulic jump is found to be more effective than that occurring in triangular and symmetric trapezoidal channels.Also,when■mes>8 and■>5,the hydraulic jump in the asymmetrical trapezoidal channel downstream of a parallelogram sluice gate is completely formed as opposed to the situation where a triangular sluice is considered.
文摘<strong>Background:</strong> Allometric scaling is a well-known research tool used for the metabolic rates of organisms. It measures the living systems with fractal physiology. The metabolic rate versus the mass of the living species has a definite scaling and behaves like a four-dimensional phenomenon. The extended investigations focus on the mass-dependence of the various physiological parameters.<strong> Objective: </strong>Proving the length of vascularization is the scaling parameter instead of mass in allometric relation. <strong>Method:</strong> The description of the energy balance of the ontogenic growth of the tumor is an extended cell-death parameter for studying the mass balance at the cellular level. <strong>Results:</strong> It is shown that when a malignant cellular cluster tries to maximize its metabolic rate, it changes its allometric scaling exponent. A growth description could follow the heterogenic development of the tumor. The mass in the allometric scaling could be replaced by the average length of the circulatory system in each case. <strong>Conclusion:</strong> According to this concept, the dependence of the mass in allometric scaling is replaced with a more fundamental parameter, the length character of the circulatory system. The introduced scaling parameter has primary importance in cancer development, where the elongation of the circulatory length by angiogenesis is in significant demand.
基金This work was financially supported by the National Natural Science Foundation of China (No.50309004).
文摘The capacity of energy absorption by fault bands after rock burst wascalculated quantitatively according to shear stress-shear deformation curves considering theinteractions and interplaying among microstructures due to the heterogeneity of strain softeningrock materials. The post-peak stiffness of rock specimens subjected to direct shear was derivedstrictly based on gradient-dependent plasticity, which can not be obtained from the classicalelastoplastic theory. Analytical solutions for the dissipated energy of rock burst were proposedwhether the slope of the post-peak shear stress-shear deformation curve is positive or not. Theanalytical solutions show that shear stress level, confining pressure, shear strength, brittleness,strain rate and heterogeneity of rock materials have important influence on the dissipated energy.The larger value of the dissipated energy means that the capacity of energy dissipation in the formof shear bands is superior and a lower magnitude of rock burst is expected under the condition ofthe same work done by external shear force. The possibility of rock burst is reduced for a lowersoftening modulus or a larger thickness of shear bands.
基金supported by the national young scientist fund of China under contract under contract No 40206003special fund for fundamental scientific research under contract (No 2007G15)
文摘Three dimensional wave-induced mixing plays an important role in shallow water area. A quite direct approach through the Reynolds average upon characteristic length scale is proposed to parameterize the horizontal and vertical shallow water mixing. Comparison of finite depth case with infinite depth results indicates that the difference of the wave-induced mixing strength is evident. In the shallow water condition, the infinite water depth approximation overestimates the mixing strength in the lower layers. The nonzero horizontal wave-induced mixing presents anisotropic property near the shore. The Prandtl's mixing length theory underestimated the wave-induced mixing in the previous studies.
文摘Fracture energy in strain softening regime was investigated analytically by considering microstructures interaction and interplay.Based on gradient-dependent plasticity, the thickness of localized band was determined completely and strictly by characteristic length in relation to average grain diameter.After obtaining the plastic shear displacement of the band,the formula on axial response of concrete was proposed and the analytical post-peak fracture energy was deduced.A comparison between present theoretical results and earlier experimental results was carried out and the analytical result is reasonable and has a plausible foundation as considering the localized failure theoretically.Decreasing the relative stress leads to increasing the fracture energy non-linearly.The larger the shear elastic modulus and shear softening modulus,the lower the post-peak fracture energy.A larger fracture energy is caused by a larger thickness of shear band or a larger characteristic length of concrete material.If the inclination angle of the shear band and the compressive strength are not concerned with structural size of specimen,the post-peak fracture energy is size independent.
基金Project supported by the National Natural Science Foundation of China(No.11472130)
文摘Eringen’s two-phase local/nonlocal model is applied to an Euler-Bernoulli nanobeam considering the bending-induced axial force, where the contribution of the axial force to bending moment is calculated on the deformed state. Basic equations for the corresponding one-dimensional beam problem are obtained by degenerating from the three-dimensional nonlocal elastic equations. Semi-analytic solutions are then presented for a clamped-clamped beam subject to a concentrated force and a uniformly distributed load, respectively. Except for the traditional essential boundary conditions and those required to be satisfied by transferring an integral equation to its equivalent differential form, additional boundary conditions are needed and should be chosen with great caution, since numerical results reveal that non-unique solutions might exist for a nonlinear problem if inappropriate boundary conditions are used. The validity of the solutions is examined by plotting both sides of the original integro-differential governing equation of deflection and studying the error between both sides. Besides, an increase in the internal characteristic length would cause an increase in the deflection and axial force of the beam.
基金supported by the National Natural Science Foundation of China(21776264 and 21376231).
文摘In our previous work,we endowed a new physical meaning of self-diffusion coefficient in Fick’s law,which proposed that the diffusion coefficient can be described as the product of the characteristic length and the diffusion velocity.To testify this simple theory,in this work,we further investigated the underlying mechanism of the characteristic length and the diffusion velocity at the molecular level.After a complete dynamic run,the statistical average diffusion velocity and the characteristic length of molecules can be obtained by scripts,and subsequently the diffusion coefficient was determined by our proposed theory.The diffusion processes in 35 systems with a wide range of pressure and concentration variations were simulated using this model.From the simulated results,diffusion coefficients from our new model matched well with the experimental results from literatures.The total average relative deviation of predicted values with respect to the experimental results is 8.18%,indicating that the novel model is objective and rational.Compared with the traditional MSD-t model,this novel diffusion coefficient model provides more reliable results,and the theory is simple and straightforward in concept.Additionally,the effect of gas pressure and liquid concentration on the diffusion behavior were discussed,and the microscopic diffusion mechanism was elucidated through the distribution of diffusion velocity and the characteristic length analysis.Moreover,we suggested new distribution functions,providing more reliable data theoretical foundations for the future research about the diffusion coefficient.
基金supported by the National Natural Science Foundation of China(61671208).
文摘User-transformer relations are significant to electric power marketing,power supply safety,and line loss calculations.To get accurate user-transformer relations,this paper proposes an identification method for user-transformer relations based on improved quantum particle swarm optimization(QPSO)and Fuzzy C-Means Clustering.The main idea is:as energymeters at different transformer areas exhibit different zero-crossing shift features,we classify the zero-crossing shift data from energy meters through Fuzzy C-Means Clustering and compare it with that at the transformer end to identify user-transformer relations.The proposed method contributes in three main ways.First,based on the fuzzy C-means clustering algorithm(FCM),the quantum particle swarm optimization(PSO)is introduced to optimize the FCM clustering center and kernel parameters.The optimized FCM algorithm can improve clustering accuracy and efficiency.Since easily falls into a local optimum,an improved PSO optimization algorithm(IQPSO)is proposed.Secondly,considering that traditional FCM cannot solve the linear inseparability problem,this article uses a FCM(KFCM)that introduces kernel functions.Combinedwith the IQPSOoptimization algorithm used in the previous step,the IQPSO-KFCM algorithm is proposed.Simulation experiments verify the superiority of the proposed method.Finally,the proposed method is applied to transformer detection.The proposed method determines the class members of transformers and meters in the actual transformer area,and obtains results consistent with actual user-transformer relations.This fully shows that the proposed method has practical application value.
文摘The current study performed a finite element analysis of the strain localization behavior of a voided ductile material using a non-local plasticity formulation in which the yield strength depends on both an equivalent plastic strain measurement (hardening parameter) and Laplacian equivalent. The introduction of gradient terms to the yield function was found to play an important role in simulating the strain localization behavior of the voided ductile material. The effect of the mesh size and characteristic length on the strain localization were also investigated. An FEM simulation based on the proposed non-local plasticity revealed that the load-strain curves of the voided ductile material subjected to plane strain tension converged to one curve, regardless of the mesh size. In addition, the results using non-local plasticity also exhibited that the dependence of the deformation behavior of the material on the mesh size was much less sensitive than that with classical local plasticity and could be succe
基金State Key Fundamental Research Project of"L arge Scale Scientific Com putation Research" ( G19990 3 2 81)NSFC( 10 2 72 10 4) Keji Chuangxin Project of CAS ( KJCX2 -SW-L 0 3 )
文摘The transition features of the wake behind a uniform circular cylinder at \%Re\%=200, which is just beyond the critical Reynolds number of 3\|D transition, are investigated in detail by direct numerical simulations of 3\|D incompressible Navier\|Stokes equations. The spanwise characteristic length determines the transition features and global properties of the wake.
基金supported by the National Natural Science Foundation of China(Nos.10772116,10772115 and 10932007)by the JST program ‘Development of Technology for Promoting Food Quality Project’
文摘The fatigue life prediction of high strength steel SUS 630 (H900) under high cycle loading is conducted with consideration of a characteristic fatigue length of material. Based on the WShler curve of smooth materials, a modified method for fatigue life prediction is approached. The characteristic fatigue length of material under cyclic loading is associated with the polycrystalline material. Rather than the stress at a point, the average stress within the characteristic fatigue length is implemented for the fatigue life prediction. The method can be applied to both the smooth and the defected material. The fatigue life prediction is also verified experimentally by specimens with various small circular holes. Through the comparison, it is found that the method can be adopted to predict the fatigue lives with different size effects.