The non-linear dynamic behaviors of thermoelastic circular plate with varying thickness subjected to radially uniformly distributed follower forces are considered. Two coupled non-linear differential equations of moti...The non-linear dynamic behaviors of thermoelastic circular plate with varying thickness subjected to radially uniformly distributed follower forces are considered. Two coupled non-linear differential equations of motion for this problem are derived in terms of the transverse deflection and radial displacement component of the mid-plane of the plate. Using the Kantorovich averaging method, the differential equation of mode shape of the plate is derived, and the eigenvalue problem is solved by using shooting method. The eigencurves for frequencies and critical loads of the circular plate with unmovable simply supported edge and clamped edge are obtained. The effects of the variation of thickness and temperature on the frequencies and critical loads of the thermoelastic circular plate subjected to radially uniformly distributed follower forces are then discussed.展开更多
In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By ...In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By virtue of the Stroh formalism and Fourier transformation, the final expression of solutions in the physical domain contains only line integrals over [0, 2π] rather than infinite integrals. As the reduced cases, the half-space and homogeneous full-space solutions can be directly derived from the present solutions. Also, in terms of material domains, the present solutions can be reduced to the piezoelectric, piezomagnetic, purely elastic materials with different symmetries of material prop- erty. To carry out numerical calculations, Gauss quadrature is adopted. In the numerical examples, the effect of different loading locations on the response at the interface is analyzed. It is shown that, when the magnetic traction or electric dislocation is applied, the physical quantities on the interface may not decrease monotonically as the loading area moves away from the interface. The distributions of different in-plane physical quantities on the upper and lower interfaces under various extended horizontal loadings are compared and the differences are discussed. The work presented in this paper can serve as benchmarks for future numerical studies in related research fields.展开更多
A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced...A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced distribution based on the theory of W-N gears. The changing situations of load distribution among contact bearings of the gears influenced by main issues are analyzed by a series of parametric studies.展开更多
By using the modified iteration method of large deflection theory of plates with variable thichness[1], we solve the problem of circular plates with variable thickness subjected to combined loads under the boundary co...By using the modified iteration method of large deflection theory of plates with variable thichness[1], we solve the problem of circular plates with variable thickness subjected to combined loads under the boundary conditions of the clamped edges and get comparatively more accurate second-order approximate analytical solution. If the results of this paper are degraded into the special cases, the results coinciding with those of papers [1,2] can be obtained. In this paper, the characteristic curves are plotted and some comparisons are made. The results of this paper are satisfactory.展开更多
Using a circular incremental step load and unload method, a set of rheological experiments were performed to study the viscoelasto-plastic properties of amphibolite in Jinchuan No.2 diggings under different environmen...Using a circular incremental step load and unload method, a set of rheological experiments were performed to study the viscoelasto-plastic properties of amphibolite in Jinchuan No.2 diggings under different environments. Based on the scientific analysis on rheological experimental data, the viscoelasto-plastic properties of amphibolite under different environments were studied. The results show that the instantaneous elastic modulus and viscoplastic properties of amphibolite are affected little, the viscoelastic properties of amphibolite are significantly affected. Based on the experimental results and characteristics of recovered rock specimen, a generalized Kelvin model was chosen to simulate rheological properties of amphibolites and key parameters were obtained. It is found that the creep deformation modulus E1 is significantly influenced by the water, while the instant elastic modulus E2 is not significantly affected. The discreteness of the viscosity coefficient η is large, the influence of water on η is not clear and needs to be further studied.展开更多
基金Natural Science Research Project of Education Department of Shaanxi Province,China(No.08JK394).
文摘The non-linear dynamic behaviors of thermoelastic circular plate with varying thickness subjected to radially uniformly distributed follower forces are considered. Two coupled non-linear differential equations of motion for this problem are derived in terms of the transverse deflection and radial displacement component of the mid-plane of the plate. Using the Kantorovich averaging method, the differential equation of mode shape of the plate is derived, and the eigenvalue problem is solved by using shooting method. The eigencurves for frequencies and critical loads of the circular plate with unmovable simply supported edge and clamped edge are obtained. The effects of the variation of thickness and temperature on the frequencies and critical loads of the thermoelastic circular plate subjected to radially uniformly distributed follower forces are then discussed.
基金supported by the National Natural Science Foundation of China (10772024)
文摘In this paper, we derive the analytical solutions in a three-dimensional anisotropic magnetoelectroelastic bimaterial space subject to uniform extended dislocations and tractions within a horizontal circular area. By virtue of the Stroh formalism and Fourier transformation, the final expression of solutions in the physical domain contains only line integrals over [0, 2π] rather than infinite integrals. As the reduced cases, the half-space and homogeneous full-space solutions can be directly derived from the present solutions. Also, in terms of material domains, the present solutions can be reduced to the piezoelectric, piezomagnetic, purely elastic materials with different symmetries of material prop- erty. To carry out numerical calculations, Gauss quadrature is adopted. In the numerical examples, the effect of different loading locations on the response at the interface is analyzed. It is shown that, when the magnetic traction or electric dislocation is applied, the physical quantities on the interface may not decrease monotonically as the loading area moves away from the interface. The distributions of different in-plane physical quantities on the upper and lower interfaces under various extended horizontal loadings are compared and the differences are discussed. The work presented in this paper can serve as benchmarks for future numerical studies in related research fields.
文摘A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced distribution based on the theory of W-N gears. The changing situations of load distribution among contact bearings of the gears influenced by main issues are analyzed by a series of parametric studies.
文摘By using the modified iteration method of large deflection theory of plates with variable thichness[1], we solve the problem of circular plates with variable thickness subjected to combined loads under the boundary conditions of the clamped edges and get comparatively more accurate second-order approximate analytical solution. If the results of this paper are degraded into the special cases, the results coinciding with those of papers [1,2] can be obtained. In this paper, the characteristic curves are plotted and some comparisons are made. The results of this paper are satisfactory.
基金Project (10972238) supported by the National Natural Science Foundation of ChinaProject (2009bsxt061) supported by the Thesis Innovation Funds for the Central South University, ChinaProject (2009) supported by Hunan Administration of Work Safety Fund, China
文摘Using a circular incremental step load and unload method, a set of rheological experiments were performed to study the viscoelasto-plastic properties of amphibolite in Jinchuan No.2 diggings under different environments. Based on the scientific analysis on rheological experimental data, the viscoelasto-plastic properties of amphibolite under different environments were studied. The results show that the instantaneous elastic modulus and viscoplastic properties of amphibolite are affected little, the viscoelastic properties of amphibolite are significantly affected. Based on the experimental results and characteristics of recovered rock specimen, a generalized Kelvin model was chosen to simulate rheological properties of amphibolites and key parameters were obtained. It is found that the creep deformation modulus E1 is significantly influenced by the water, while the instant elastic modulus E2 is not significantly affected. The discreteness of the viscosity coefficient η is large, the influence of water on η is not clear and needs to be further studied.