Superconvergence of Direct Discontinuous Galerkin Methods:Eigen-structure Analysis Based on Fourier Approach

This paper investigates superconvergence properties of the direct discontinuous Galerkin(DDG)method with interface corrections and the symmetric DDG method for diffusion equations.We apply the Fourier analysis technique to symbolically compute eigenvalues and eigenvectors of the amplification matrices for both DDG methods with different coefficient settings in the numerical fluxes.Based on the eigen-structure analysis,we carry out error estimates of the DDG solutions,which can be decomposed into three parts:(i)dissipation errors of the physically relevant eigenvalue,which grow linearly with the time and are of order 2k for P^(k)(k=2,3)approximations;(ii)projection error from a special projection of the exact solution,which is decreasing over the time and is related to the eigenvector corresponding to the physically relevant eigenvalue;(iii)dissipative errors of non-physically relevant eigenvalues,which decay exponentially with respect to the spatial mesh sizeΔx.We observe that the errors are sensitive to the choice of the numerical flux coefficient for even degree P^(2)approximations,but are not for odd degree P^(3)approximations.Numerical experiments are provided to verify the theoretical results.

Clarkson-Kruskal Direct Similarity Approach for Differential-Difference Equations

In this letter, the Clarkson-Kruskal direct method is extended to similarity reduce some differentialdifference equations. As examples, the differential-difference KZ equation and KP equation are considered.

Finite element numerical simulation of 2.5D direct current method based on mesh refinement and recoarsement

To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.

THREE-DIMENSIONAL TRAJECTORY OPTIMIZATION WITH DIRECT METHOD

The principle of direct method used in optimal control problem is introduced. Details of applying this method to flight trajectory generation are presented including calculation of velocity and controls histories. And capabilities of flight and propulsion systems are considered also. Combined with digital terrain map technique, the direct method is applied to the three dimensional trajectory optimization for low altitude penetration, and simplex algorithm is used to solve the parameters in optimization. For the small number of parameters, the trajectory can be optimized in real time on board.

Fast alternating direction method of multipliers for total-variation-based image restoration

A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is reformulated as a linear equality constrained problem where the objective function is separable. Then, by introducing the augmented Lagrangian function, the two variables are alternatively minimized by the Gauss-Seidel idea. Finally, the dual variable is updated. Because the approach makes full use of the special structure of the problem and decomposes the original problem into several low-dimensional sub-problems, the per iteration computational complexity of the approach is dominated by two fast Fourier transforms. Elementary experimental results indicate that the proposed approach is more stable and efficient compared with some state-of-the-art algorithms.

Direct computing methods for turn flows in traffic assignment

Two methods based on a slight modification of the regular traffic assignmentalgorithms are proposed to directly compute turn flows instead of estimating them from link flows orobtaining them by expanding the networks. The first one is designed on the path-turn incidencerelationship, and it is similar to the computational procedure of link flows. It applies to thetraffic assignment algorithms that can provide detailed path structures. The second utilizes thelink-turn incidence relationship and the conservation of flow on links, a law deriving from thisrelationship. It is actually an improved version of Dial's logit assignment algorithm. The proposedapproaches can avoid the shortcomings both of the estimation methods, e. g. Furness's model andFrator's model, and of the network-expanding method in precision, stability and computation scale.Finally, they are validated by numerical examples.

DIRECTED HYPERGRAPH THEORY AND DECOMPOSITION CONTRACTION METHOD

A new branch of hypergraph theory-directed hyperaph theory and a kind of new methods-dicomposition contraction(DCP, PDCP and GDC) methods are presented for solving hypernetwork problems.lts computing time is lower than that of ECP method in several order of magnitude.

Preparation of Al-Al_3Ti in situ composites by direct reaction method

Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-like to large block with the increase of Al3Ti content. The addition of magnesium can markedly change the morphology of Al3Ti and reduce their size. Short rod-like Al3Ti was formed and homogeneous distribution was obtained with the addition of 3 wt.% Mg. The effect of Al3Ti and Mg on the microstructure of Al-Al3Ti composites and the mechanism were also discussed.

Image reconstruction based on total-variation minimization and alternating direction method in linear scan computed tomography

Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation （TV） minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method （ADM） to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.

Study on Measurement Methods of Multi-Directional Waves—Wave Gauge Array Method

Measuring multi-directional waves with the wave gauge array is one of the fundamental and easily realised methods. In this paper, the wave gauge array is described and the effects of the gauge spacing, the array orientations, etc. of the three array arrangements, i. e., linear array, T-type array and pentagon array, on the resolution of the directional spreading of waves, are investigated experimentally. This study can be used as a reference in the experimental study and the field measurement of directional waves.

Direct discontinuous Galerkin method for the generalized Burgers-Fisher equation

In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cells are jointed by a numerical flux that includes the convection numerical flux and the diffusion numerical flux. We solve the ordinary differential equations arising in the direct Galerkin method by using the strong stability preserving Runge^Kutta method. Numerical results are compared with the exact solution and the other results to show the accuracy and reliability of the method.

A laboratory study of directional spectra with maximum likelihood method─I Developing wind wave

From measurements by a circular array consisting of 18 wave gauges in a large wave tank, directional spectra of wind-generated waves in deep water are systematically determined by using maximum likehood method.The investigations reveal that the angular spreading of the wave energy is consistent with cos2s(θ/2) proposed by Longuet-Higgins et al. (1963, Ocean Wad Spectra,11~136), if the bimodal distributions of wave energy are not taken into account. Bimodality occurring on higher frequency than peak frequency is too rare to affect our whole results. Surprisingly, a much broader directional spreading than that of the field, which is interpreted by the strongly nonlinear energy transfer because of the very young waves in laboratory, is found. The parameter s depends on frequency in the same way as observed by Mitsuyasu et al. (1975, Journal of Physical Oceanography, 5, 750~760)and Hasselmann et al. (1980, Journal of physical Oceanography, 10, 1264~1280) in the field, and the relationship between the four nondimensional parameters sm, fo, b1 and b2, determining the directional width, and (corresponding to the inverse of wave age) are given respectively. The observed distributions are found to agree well with the suggestion of Donelan et al. (1985, Philosophical Transaction of Royal Society of London, A315, 509~562) when applied to field waves.

OPTIMIZATION OF ADAPTIVE DIRECT METHOD FOR APPROXIMATE SOLUTION OF INTEGRAL EQUATIONS OF SEVERAL VARIABLES

This paper determines the exact error order on optimization of adaptive direct methods of approximate solution of the class of Fredholm integral equations of the second kind with kernel belonging to the anisotropic Sobolev classes, and also gives an optimal algorithm.

Advances in traction methods for endoscopic submucosal dissection:What is the best traction method and traction direction?

Endoscopic submucosal dissection(ESD)has been developed as a treatment for superficial gastrointestinal neoplasms,which can achieve en bloc resection regardless of the lesion size.However,ESD is technically difficult because endoscopists cannot bring their hand into the gastrointestinal tract,unlike surgeons in regular surgery.It is difficult to obtain sufficient tension in the dissection plane and a good field of vision.Therefore,ESD is associated with a long procedure time and a high risk of adverse events in comparison with endoscopic mucosal resection.Traction methods have been developed to provide sufficient tension for the dissection plane and a good field of vision during the ESD procedure.However,traction direction is limited in most traction methods,resulting in insufficient effect in some cases.Although traction direction is considered important,there have been few investigations of its effect.In the first half of this review,important traction methods are discussed,including traction direction.In second half,appropriate traction methods for each organ are considered.Other important considerations for traction method,such as ability to adjust traction strength,interference between traction device and endoscope,and the need for specialized devices are also discussed.

Generating Lie Point Symmetry Groups of (2-10-Dimensional Broer-Kaup Equationvia a Simple Direct Method

Using the (2+1)-dimensional Broer-Kaup equation as an simple example, a new direct method is developed to find symmetry groups and symmetry algebras and then exact solutions of nonlinear mathematical physical equations.

Two-Order Approximate and Large Stepsize Numerical Direction Based on the Quadratic Hypothesis and Fitting Method

Many effective optimization algorithms require partial derivatives of objective functions, while some optimization problems' objective functions have no derivatives. According to former research studies, some search directions are obtained using the quadratic hypothesis of objective functions. Based on derivatives, quadratic function assumptions, and directional derivatives, the computational formulas of numerical first-order partial derivatives, second-order partial derivatives, and numerical second-order mixed partial derivatives were constructed. Based on the coordinate transformation relation, a set of orthogonal vectors in the fixed coordinate system was established according to the optimization direction. A numerical algorithm was proposed, taking the second order approximation direction as an example. A large stepsize numerical algorithm based on coordinate transformation was proposed. Several algorithms were validated by an unconstrained optimization of the two-dimensional Rosenbrock objective function. The numerical second order approximation direction with the numerical mixed partial derivatives showed good results. Its calculated amount is 0.2843% of that of without second-order mixed partial derivative. In the process of rotating the local coordinate system 360°, because the objective function is more complex than the quadratic function, if the numerical direction derivative is used instead of the analytic partial derivative, the optimization direction varies with a range of 103.05°. Because theoretical error is in the numerical negative gradient direction, the calculation with the coordinate transformation is 94.71% less than the calculation without coordinate transformation. If there is no theoretical error in the numerical negative gradient direction or in the large-stepsize numerical optimization algorithm based on the coordinate transformation, the sawtooth phenomenon occurs. When each numerical mixed partial derivative takes more than one point, the optimization results cannot be improved. The numerical direction based on the quadratic hypothesis only requires the objective function to be obtained, but does not require derivability and does not take into account truncation error and rounding error. Thus, the application scopes of many optimization methods are extended.

Synthesis of Hierarchically Porous FAU/γ-Al2O3 Composites with Different Morphologies via Directing Agent Induced Method

Zeolite FAU composites with a macro/meso-microporous hierarchical structure were hydrothermally synthesized using macro-mesoporous γ-Al_2O_3 monolith as the substrate by means of the liquid crystallization directing agent(LCDA) induced method. No template was needed throughout the synthesis processes. The structure and porosity of zeolite composites were analyzed by means of X-ray powder diffraction(XRD), scanning electron microscopy(SEM) and N_2adsorption-desorption isotherms. The results showed that the supported zeolite composites with varied zeolitic crystalline phases and different morphologies can be obtained by adjusting the crystallization parameters, such as the crystallization temperature, the composition and the alkalinity of the precursor solution. The presence of LCDA was defined as a determinant for synthesizing the zeolite composites. The mechanisms for formation of the hierarchically porous FAU zeolite composites in the LCDA induced synthesis process were discussed. The resulting monolithic zeolite with a trimodal-porous hierarchical structure shows potential applicability where facile diffusion is required.

Combined indirect and direct method for adaptive fuzzy output feedback control of nonlinear system

A novel control method for a general class of nonlinear systems using fuzzy logic systems （FLSs） is presertted. Indirect and direct methods are combined to design the adaptive fuzzy output feedback controller and a high-gain observer is used to estimate the derivatives of the system output. The closed-loop system is proven to be semiglobally uniformly ultimately bounded. In addition, it is shown that if the approximation accuracy of the fuzzy logic system is high enough and the observer gain is chosen sufficiently large, an arbitrarily small tracking error can be achieved. Simulation results verify the effectiveness of the newly designed scheme and the theoretical discussion.

Reconstruction of electrical capacitance tomography images based on fast linearized alternating direction method of multipliers for two-phase flow system

Electrical capacitance tomography(ECT)has been applied to two-phase flow measurement in recent years.Image reconstruction algorithms play an important role in the successful applications of ECT.To solve the ill-posed and nonlinear inverse problem of ECT image reconstruction,a new ECT image reconstruction method based on fast linearized alternating direction method of multipliers(FLADMM)is proposed in this paper.On the basis of theoretical analysis of compressed sensing(CS),the data acquisition of ECT is regarded as a linear measurement process of permittivity distribution signal of pipe section.A new measurement matrix is designed and L1 regularization method is used to convert ECT inverse problem to a convex relaxation problem which contains prior knowledge.A new fast alternating direction method of multipliers which contained linearized idea is employed to minimize the objective function.Simulation data and experimental results indicate that compared with other methods,the quality and speed of reconstructed images are markedly improved.Also,the dynamic experimental results indicate that the proposed algorithm can ful fill the real-time requirement of ECT systems in the application.

Direct method of finding first integral of two-dimensional autonomous systems in polar coordinates

A direct method to find the first integral for two-dimensional autonomous system in polar coordinates is suggested. It is shown that if the equation of motion expressed by differential 1-forms for a given autonomous Hamiltonian system is multiplied by a set of multiplicative functions, then the general expression of the first integral can be obtained, An example is given to illustrate the application of the results.