Effects of carbon nanotubes （CNT） and alumina （γ-Al2O3） supports on the catalytic activities of hydrodesulfurization （HDS） process over Co- Mo catalyst have been studied. XRD results indicated that the main act...Effects of carbon nanotubes （CNT） and alumina （γ-Al2O3） supports on the catalytic activities of hydrodesulfurization （HDS） process over Co- Mo catalyst have been studied. XRD results indicated that the main active phases in CNT and γ-Al2O3 supported Co-Mo catalysts are MoO2 and MOO3, respectively. The TPR results reveal that the reduction peak temperatures of the active species on CNT supported Co-Mo catalyst is lower than those on alumina supported Co-Mo catalyst, indicating that the CNT supports favor the reduction of active species. Catalytic evaluation results displayed that the sulfur content in the reaction products on the CNT supported Co-Mo catalyst is lower than that on the alumina supported Co-Mo catalyst if the HDS reaction was carried out at a temperature above 583 K.展开更多
Sulfuric acid recovery from rare earth sulphate solutions by diffusion dialysis was studied. The mass transfer model of diffusion dialysis was established, the comparison between the experimental results and mathemati...Sulfuric acid recovery from rare earth sulphate solutions by diffusion dialysis was studied. The mass transfer model of diffusion dialysis was established, the comparison between the experimental results and mathematical results was carried out, and the numerical analysis on the effects of operational parameters was studied. The results indicate that the derived mathematical model shows good quantitative relation between sulphuric acid recovery ratio and operational parameters, and the mathematical results agree with the experimental results well. The numerical analysis results indicate that it is appropriate to keep the ratio of water and feed flow rates, processing capacity per membrane area and recovery ratio of sulphuric acid to be 1, 20 L/(m2·d) and 0.7?0.8, respectively.展开更多
The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with t...The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with the 1.2Mt/a diesel hydrofining unit. The process unit calibration data have revealed that the recovery of total sulfur reaches 99.86%, which is 6.65 percentage points higher than that before application of the RAR technology. The SO2 content in vented tail gas is 0.27 t/d, which is much less than the latest emission standard prescribed by the State. The factors that can affect the unit operation have been analyzed and corresponding measures have been suggested including the necessity to improve the control over the reaction temperature in the tail gas hydrogenation unit.展开更多
Nickel has found increasing application in electronic,automobile manufacturing,plating,and metal industries and so on.Producing high quality metal powders to satisfy increasing demand for advanced materials is of very...Nickel has found increasing application in electronic,automobile manufacturing,plating,and metal industries and so on.Producing high quality metal powders to satisfy increasing demand for advanced materials is of very high importance.There are a few numbers of standard powder production techniques.An acidic leaching has been applied in present research.Sulfuric acid has been used to leach nickel wastes of plating industry.To produce nickel oxide powder furnaces with no protecting atmosphere and to produce pure nickel powder,tube furnace with hydrogen atmosphere has been applied.Variables performed in the research are time,density of sulfuric acid,and amount of hydrogen peroxide.To analyze powders produced,EDS element analysis and to determine size of powder particles,SEM has been applied.It was shown by the results that the highest amount of nickel dissolution in sulfuric acid(98%)has taken place during one hour and there is a direct relationship between hydrogen peroxide amount and nickel dissolution in sulfuric acid.展开更多
文摘Effects of carbon nanotubes （CNT） and alumina （γ-Al2O3） supports on the catalytic activities of hydrodesulfurization （HDS） process over Co- Mo catalyst have been studied. XRD results indicated that the main active phases in CNT and γ-Al2O3 supported Co-Mo catalysts are MoO2 and MOO3, respectively. The TPR results reveal that the reduction peak temperatures of the active species on CNT supported Co-Mo catalyst is lower than those on alumina supported Co-Mo catalyst, indicating that the CNT supports favor the reduction of active species. Catalytic evaluation results displayed that the sulfur content in the reaction products on the CNT supported Co-Mo catalyst is lower than that on the alumina supported Co-Mo catalyst if the HDS reaction was carried out at a temperature above 583 K.
文摘Sulfuric acid recovery from rare earth sulphate solutions by diffusion dialysis was studied. The mass transfer model of diffusion dialysis was established, the comparison between the experimental results and mathematical results was carried out, and the numerical analysis on the effects of operational parameters was studied. The results indicate that the derived mathematical model shows good quantitative relation between sulphuric acid recovery ratio and operational parameters, and the mathematical results agree with the experimental results well. The numerical analysis results indicate that it is appropriate to keep the ratio of water and feed flow rates, processing capacity per membrane area and recovery ratio of sulphuric acid to be 1, 20 L/(m2·d) and 0.7?0.8, respectively.
文摘The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with the 1.2Mt/a diesel hydrofining unit. The process unit calibration data have revealed that the recovery of total sulfur reaches 99.86%, which is 6.65 percentage points higher than that before application of the RAR technology. The SO2 content in vented tail gas is 0.27 t/d, which is much less than the latest emission standard prescribed by the State. The factors that can affect the unit operation have been analyzed and corresponding measures have been suggested including the necessity to improve the control over the reaction temperature in the tail gas hydrogenation unit.
文摘Nickel has found increasing application in electronic,automobile manufacturing,plating,and metal industries and so on.Producing high quality metal powders to satisfy increasing demand for advanced materials is of very high importance.There are a few numbers of standard powder production techniques.An acidic leaching has been applied in present research.Sulfuric acid has been used to leach nickel wastes of plating industry.To produce nickel oxide powder furnaces with no protecting atmosphere and to produce pure nickel powder,tube furnace with hydrogen atmosphere has been applied.Variables performed in the research are time,density of sulfuric acid,and amount of hydrogen peroxide.To analyze powders produced,EDS element analysis and to determine size of powder particles,SEM has been applied.It was shown by the results that the highest amount of nickel dissolution in sulfuric acid(98%)has taken place during one hour and there is a direct relationship between hydrogen peroxide amount and nickel dissolution in sulfuric acid.
