Stem cell-based therapies have been proposed as a potential treatment for neural regeneration following closed head injury.We previously reported that induced neural stem cells exert beneficial effects on neural regen...Stem cell-based therapies have been proposed as a potential treatment for neural regeneration following closed head injury.We previously reported that induced neural stem cells exert beneficial effects on neural regeneration via cell replacement.However,the neural regeneration efficiency of induced neural stem cells remains limited.In this study,we explored differentially expressed genes and long non-coding RNAs to clarify the mechanism underlying the neurogenesis of induced neural stem cells.We found that H19 was the most downregulated neurogenesis-associated lnc RNA in induced neural stem cells compared with induced pluripotent stem cells.Additionally,we demonstrated that H19 levels in induced neural stem cells were markedly lower than those in induced pluripotent stem cells and were substantially higher than those in induced neural stem cell-derived neurons.We predicted the target genes of H19 and discovered that H19 directly interacts with mi R-325-3p,which directly interacts with Ctbp2 in induced pluripotent stem cells and induced neural stem cells.Silencing H19 or Ctbp2 impaired induced neural stem cell proliferation,and mi R-325-3p suppression restored the effect of H19 inhibition but not the effect of Ctbp2 inhibition.Furthermore,H19 silencing substantially promoted the neural differentiation of induced neural stem cells and did not induce apoptosis of induced neural stem cells.Notably,silencing H19 in induced neural stem cell grafts markedly accelerated the neurological recovery of closed head injury mice.Our results reveal that H19 regulates the neurogenesis of induced neural stem cells.H19 inhibition may promote the neural differentiation of induced neural stem cells,which is closely associated with neurological recovery following closed head injury.展开更多
This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material (FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on class...This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material (FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on classical thin plate theory, the governing differential equations are derived using Hamilton's principle. A neutral surface is used to eliminate stretching-bending coupling in FGM plates on the basis of the assumption of constant Poisson's ratio. The resulting governing equation of FGM thin plates has the same form as homogeneous thin plates. The separation-of-variables method is adopted to obtain solutions for the free vibration problems of rectangular FGM thin plates with separable boundary conditions, including, for example, clamped plates. The obtained normal modes and frequencies are in elegant closed forms, and present formulations and solutions are validated by comparing present results with those in the literature and finite element method results obtained by the authors. A parameter study reveals the effects of the power law index n and aspect ratio a/b on frequencies.展开更多
As-cast and heat-treated 400-18 ductile iron （DI） grade was obtained in different foundry conditions, as metallic charge, Mg-treatment alloy and inoculation. It was found that the Pearlitic Influence Factor （P） an...As-cast and heat-treated 400-18 ductile iron （DI） grade was obtained in different foundry conditions, as metallic charge, Mg-treatment alloy and inoculation. It was found that the Pearlitic Influence Factor （P） and Anti- nodulizing Complex Factor （K1） have an important influence on property of DI, depending on the Mn and P level, the metallurgical quality of iron melt, rare earth （RE） and inoculation. It was also found that the influence of Mn is depended on the phosphorus and residual elements level in ductile iron. Less than 0.03%P and 0.2%Mn and P〈2.0 are the basic conditions to obtain as-cast ferritic structure. At the same lower level of Mn and P, the increasing of residual elements （P〉2.0） determines presence of pearlite in as-cast structure, while ferrite structure is obtained after a short annealing heat treatment. Lower level of phosphorus （P〈0.025%） and residual elements （Px〈2.0） allow to use relative high Mn content （0.32%-0.38%）, in condition of ferritic structure, including in as-cast state. High P （0.04%- 0.045%） and Mn （0.25%-0.35%） content stabilized peadite, especially at lower level of residual elements （P 〈2.0）. Antinodulizing action of elements was counteracted up to K1=2.0 level, by RE included in Mg-treatment alloy, which are beneficial for K1〈1.2 and compulsory for K1〉1.2. Si has a significant influence on the mechanical properties of heat treated ductile irons： an important decreasing of elongation level and a moderate increasing of yield and tensile strength and their ratio in 150-170 HB typical hardness field. A typical final chemical composition for as-cast 400-18 ductile iron could include 3.5%-3.7%C, 2.4%-2.5%Si, max.0.18%Mn, max.0.025%P, max.0.01%S, 0.04%-0.05%Mg for Px〈1.5 and K1〈1.1. High purity pig iron, RE-bearing FeSiMg and powerful inoculant are also recommended.展开更多
The present study focuses on the analysis of free vibrations of axisymmetric functionally graded hollow spheres. The material is assumed to be graded in radial di- rection with a simple power law. Matrix Frrbenious me...The present study focuses on the analysis of free vibrations of axisymmetric functionally graded hollow spheres. The material is assumed to be graded in radial di- rection with a simple power law. Matrix Frrbenious method of extended power series is employed to derive the analytical solutions for displacement, temperature, and stresses. The dispersion relations for the existence of various types of pos- sible modes of vibrations in the considered hollow sphere are derived in a compact form. In order to explore the character- istics of vibrations, the secular equations are further solved by using fixed point iteration numerical technique with the help of MATLAB software. The numerical results have been presented graphically for polymethyl methecrylate materials in respect of natural frequencies, frequency shift, inverse quality factor, displacement, temperature change, and radial stress.展开更多
In this study,a coupling model of fluid-conveying pipes made of functionally graded materials(FGMs)with NiTiNOL-steel(NiTi-ST)for vibration absorption is investigated.The vibration responses of the FGM fluid-conveying...In this study,a coupling model of fluid-conveying pipes made of functionally graded materials(FGMs)with NiTiNOL-steel(NiTi-ST)for vibration absorption is investigated.The vibration responses of the FGM fluid-conveying pipe with NiTi-ST are studied by the Galerkin truncation method(GTM)and harmonic balance method(HBM).The harmonic balance solutions and the numerical results are consistent.Also,the linearized stability of the structure is determined.The effects of the structure parameters on the absorption performance are also studied.The results show that the NiTi-ST is an effective means of vibration absorption.Furthermore,in studying the effect of the NiTi-ST,a closed detached response(CDR)is first observed.It is noteworthy that the CDR may dramatically change the vibration amplitude and that the parameters of the NiTi-ST may determine the emergence or disappearance of the CDR.This vibration absorption device can be extended to offer more general vibration control in engineering applications.展开更多
In this paper,CCD photometric light curves for the short-period eclipsing binary 1 SWASP J140533.33＋114639.1（hereafter J1405） in the BV R bands are presented and analyzed using the 2013 version of the Wilson-Devin...In this paper,CCD photometric light curves for the short-period eclipsing binary 1 SWASP J140533.33＋114639.1（hereafter J1405） in the BV R bands are presented and analyzed using the 2013 version of the Wilson-Devinney（W-D） code. It is discovered that J1405 is a W-subtype shallow contact binary with a contact degree of f = 7.9±0.5% and a mass ratio of q = 1.55±0.02. In order to explain the asymmetric light curves of the system,a cool starspot on the more massive component is employed. This shallow contact eclipsing binary may have been formed from a short-period detached system through orbital shrinkage due to angular momentum loss. Based on the（O-C） method,the variation of orbital period is studied using all the available times of minimum light. The（O-C） diagram reveals that the period is increasing continuously at a rate of d P/dt = ＋2.09×10^-7 d yr^-1,which can be explained by mass transfer from the less massive component to the more massive one.展开更多
BH Cen is a short-period early-type binary with a period of 0.792^d in the extremely young star-forming cluster IC 2944. New multi-color CCD photometric light curves in U, B, V, R and I bands are presented and are ana...BH Cen is a short-period early-type binary with a period of 0.792^d in the extremely young star-forming cluster IC 2944. New multi-color CCD photometric light curves in U, B, V, R and I bands are presented and are analyzed by using the Wilson-Devinney code. It is detected that BH Cen is a high-mass-ratio overcontact binary with a fill-out factor of 46.4% and a mass ratio of 0.89. The derived orbital inclination i is 88.9 degrees, indicating that it is a totally eclipsing binary and the photometric parameters can be determined reliably. By adding new eclipse times, the orbital period changes in the binary are analyzed. It is confirmed that the period of BH Cen shows a long-term increase while it undergoes a cyclic oscillation with an amplitude of A3 = 0.024 d and a period of P3 = 50.3 yr. The high mass ratio, overcontact configuration and long-term continuous increase in the orbital period all suggest that BH Cen is in the evolutionary state after the shortest-period stage of Case A mass transfer.The continuous increase in period can be explained by mass transfer from the secondary component to the primary one at a rate of˙M2 = 2.8×10^-6 M⊙per year. The cyclic change can be plausibly explained by the presence of a third body because both components in the BH Cen system are early-type stars. Its mass is determined to be no less than 2.2 M⊙ at an orbital separation of about 32.5 AU. Since no third light was found during the photometric solution, it is possible that the third body may be a candidate for a compact object.展开更多
Objective:To investigate the vasculogenic mimicry formation induced by hypoxia in Ⅱ-Ⅲ human glioma cell and the effect of alphastatin peptide suppressing the hypoxia-induced vasculogenic mimicry formation and the me...Objective:To investigate the vasculogenic mimicry formation induced by hypoxia in Ⅱ-Ⅲ human glioma cell and the effect of alphastatin peptide suppressing the hypoxia-induced vasculogenic mimicry formation and the mechanism.Methods:MTT,Transwell and three-dimentional culture were used to detect the proliferation,migration and tubule formation of SHG44.The expression of vascular endothelial growth factor-α(VEGF-α),erythropoietin-producing hepatocellular carcinoma-A2 (EphA2) and matrix metalloproteinases 2 (MMP2) was detected by RT-PCR and Western blotting analysis.Results:The OD 490 in hypoxia group was 0.60±0.06 and in control group was 0.46±0.05.The number of cell migration was 178.71±18.81 in hypoxia group and 85.86±17.92 in control group.The tubule formation was 56.80±12.21 in hypoxia group and 4.20±2.62 in control group.The proliferation,migration and tubule formation in hypoxia group were significantly higher than that in control group.The expression of VEGF-α,EphA2 and MMP2 was upregulated in hypoxia.When various concentrations of alphastatin (100,1 000,10 000 nmol/L) were added to hypoxia group,the numbers of cell migration were 142.57±12.12,92.71±17.68,30.00±7.72 and the tubule formation were 47.71±10.58,18.86±8.40,8.43±5.62.The cell migration and tubule formation were significantly suppressed by alphastatin in a dose-dependent manner.In alphastatin group,the phosphorylation of EphA2 protein (P=0.037,F=4.629) and activation of MMP2 protein (P=0.005,F=9.331) were significantly suppressed but there was no change in VEGF-α protein.Conclusion:Ⅱ-Ⅲ human glioma cell is able to form vasculogenic mimicry induced by hypoxia and alphastatin peptide can suppress the hypoxia-induced vasculogenic mimicry.VEGF-α induced EphA2 phospharilation and MMP2 activation maybe the key pathway to form vasculogenic mimicry.展开更多
We present a catalog including 11 204 spectra of 10436 early-type emission-line stars from LAMOST DR2, among which 9752 early-type emission-line spectra are newly discovered. For these early- type emissionqine stars, ...We present a catalog including 11 204 spectra of 10436 early-type emission-line stars from LAMOST DR2, among which 9752 early-type emission-line spectra are newly discovered. For these early- type emissionqine stars, we discuss the morphological and physical properties of their low-resolution spectra. In this spectral sample, the Hα emission profiles display a wide variety of shapes. Based on the Hα line profiles, these spectra are categorized into five distinct classes： single-peak emission, single-peak emission in absorption, double-peak emission, double-peak emission in absorption, and P-Cygni profiles. To better understand what causes the Hc~ line profiles, we divide these objects into four types from the perspective of physical classification, which include classical Be stars, Herbig Ae/Be stars, close binaries and spectra contaminated by H n regions. The majority of Herbig Ae/Be stars and classical Be stars are identified and separated using a （H-K, K-W1） color-color diagram. We also discuss 31 binary systems that are listed in the SIMBAD on-line catalog and identify 3600 spectra contaminated by HⅡ regions after cross-matching with positions in the Dubout-Crillon catalog. A statistical analysis of line profiles versus classifications is then conducted in order to understand the distribution of Hc~ profiles for each type in our sample. Finally, we also provide a table of 172 spectra with Fen emission lines and roughly calculate stellar wind velocities for seven spectra with P-Cygni profiles.展开更多
The complexity of the IH-635 Managed Lanes Project, located in Dallas County, Texas, posed several technical and constructive challenges, leading to the adoption of solutions different from the traditional. Two altern...The complexity of the IH-635 Managed Lanes Project, located in Dallas County, Texas, posed several technical and constructive challenges, leading to the adoption of solutions different from the traditional. Two alternative solutions for the pier cap on one of the bridge crossings over IH-35E in the IH-635 project were analyzed in this case study, a cast-in-place post-tensioned concrete cap and an innovative prefabricated steel-concrete com- posite cap. The approach was to use an estimation of direct costs for material and labor and consideration of con- struction time schedules. A supplementary numerical modeling confirmed that both alternatives behave elasti- cally under imposed loads. The direct cost of material and labor for the two alternatives were close. However, the composite alternative required 13 days less construction time, resulting in substantial cost savings from traffic closing in the very busy traffic corridor. Traffic closing costs were substantially higher than the direct costs, especially for the post-tensioned cap. The quantification of the benefits allows more confidence in the utilization of the composites caps, leading to faster completion of bridge projects and substantial economic savings.展开更多
基金supported by the National Natural Science Foundation of China,Nos.82271397(to MG),82001293(to MG),82171355(to RX),81971295(to RX)and 81671189(to RX)。
文摘Stem cell-based therapies have been proposed as a potential treatment for neural regeneration following closed head injury.We previously reported that induced neural stem cells exert beneficial effects on neural regeneration via cell replacement.However,the neural regeneration efficiency of induced neural stem cells remains limited.In this study,we explored differentially expressed genes and long non-coding RNAs to clarify the mechanism underlying the neurogenesis of induced neural stem cells.We found that H19 was the most downregulated neurogenesis-associated lnc RNA in induced neural stem cells compared with induced pluripotent stem cells.Additionally,we demonstrated that H19 levels in induced neural stem cells were markedly lower than those in induced pluripotent stem cells and were substantially higher than those in induced neural stem cell-derived neurons.We predicted the target genes of H19 and discovered that H19 directly interacts with mi R-325-3p,which directly interacts with Ctbp2 in induced pluripotent stem cells and induced neural stem cells.Silencing H19 or Ctbp2 impaired induced neural stem cell proliferation,and mi R-325-3p suppression restored the effect of H19 inhibition but not the effect of Ctbp2 inhibition.Furthermore,H19 silencing substantially promoted the neural differentiation of induced neural stem cells and did not induce apoptosis of induced neural stem cells.Notably,silencing H19 in induced neural stem cell grafts markedly accelerated the neurological recovery of closed head injury mice.Our results reveal that H19 regulates the neurogenesis of induced neural stem cells.H19 inhibition may promote the neural differentiation of induced neural stem cells,which is closely associated with neurological recovery following closed head injury.
基金supported by the National Natural Science Foundation of China (Grants 11172028, 1372021)Research Fund for the Doctoral Program of Higher Education of China (Grant 20131102110039)the Innovation Foundation of Beihang University for PhD graduates
文摘This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material (FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on classical thin plate theory, the governing differential equations are derived using Hamilton's principle. A neutral surface is used to eliminate stretching-bending coupling in FGM plates on the basis of the assumption of constant Poisson's ratio. The resulting governing equation of FGM thin plates has the same form as homogeneous thin plates. The separation-of-variables method is adopted to obtain solutions for the free vibration problems of rectangular FGM thin plates with separable boundary conditions, including, for example, clamped plates. The obtained normal modes and frequencies are in elegant closed forms, and present formulations and solutions are validated by comparing present results with those in the literature and finite element method results obtained by the authors. A parameter study reveals the effects of the power law index n and aspect ratio a/b on frequencies.
文摘As-cast and heat-treated 400-18 ductile iron （DI） grade was obtained in different foundry conditions, as metallic charge, Mg-treatment alloy and inoculation. It was found that the Pearlitic Influence Factor （P） and Anti- nodulizing Complex Factor （K1） have an important influence on property of DI, depending on the Mn and P level, the metallurgical quality of iron melt, rare earth （RE） and inoculation. It was also found that the influence of Mn is depended on the phosphorus and residual elements level in ductile iron. Less than 0.03%P and 0.2%Mn and P〈2.0 are the basic conditions to obtain as-cast ferritic structure. At the same lower level of Mn and P, the increasing of residual elements （P〉2.0） determines presence of pearlite in as-cast structure, while ferrite structure is obtained after a short annealing heat treatment. Lower level of phosphorus （P〈0.025%） and residual elements （Px〈2.0） allow to use relative high Mn content （0.32%-0.38%）, in condition of ferritic structure, including in as-cast state. High P （0.04%- 0.045%） and Mn （0.25%-0.35%） content stabilized peadite, especially at lower level of residual elements （P 〈2.0）. Antinodulizing action of elements was counteracted up to K1=2.0 level, by RE included in Mg-treatment alloy, which are beneficial for K1〈1.2 and compulsory for K1〉1.2. Si has a significant influence on the mechanical properties of heat treated ductile irons： an important decreasing of elongation level and a moderate increasing of yield and tensile strength and their ratio in 150-170 HB typical hardness field. A typical final chemical composition for as-cast 400-18 ductile iron could include 3.5%-3.7%C, 2.4%-2.5%Si, max.0.18%Mn, max.0.025%P, max.0.01%S, 0.04%-0.05%Mg for Px〈1.5 and K1〈1.1. High purity pig iron, RE-bearing FeSiMg and powerful inoculant are also recommended.
基金support provided by CSIR New Delhi via project grant No.25 (0184)/10/EMR–II
文摘The present study focuses on the analysis of free vibrations of axisymmetric functionally graded hollow spheres. The material is assumed to be graded in radial di- rection with a simple power law. Matrix Frrbenious method of extended power series is employed to derive the analytical solutions for displacement, temperature, and stresses. The dispersion relations for the existence of various types of pos- sible modes of vibrations in the considered hollow sphere are derived in a compact form. In order to explore the character- istics of vibrations, the secular equations are further solved by using fixed point iteration numerical technique with the help of MATLAB software. The numerical results have been presented graphically for polymethyl methecrylate materials in respect of natural frequencies, frequency shift, inverse quality factor, displacement, temperature change, and radial stress.
基金Project supported by the National Natural Science Foundation of China(Nos.12272240 and12022213)。
文摘In this study,a coupling model of fluid-conveying pipes made of functionally graded materials(FGMs)with NiTiNOL-steel(NiTi-ST)for vibration absorption is investigated.The vibration responses of the FGM fluid-conveying pipe with NiTi-ST are studied by the Galerkin truncation method(GTM)and harmonic balance method(HBM).The harmonic balance solutions and the numerical results are consistent.Also,the linearized stability of the structure is determined.The effects of the structure parameters on the absorption performance are also studied.The results show that the NiTi-ST is an effective means of vibration absorption.Furthermore,in studying the effect of the NiTi-ST,a closed detached response(CDR)is first observed.It is noteworthy that the CDR may dramatically change the vibration amplitude and that the parameters of the NiTi-ST may determine the emergence or disappearance of the CDR.This vibration absorption device can be extended to offer more general vibration control in engineering applications.
基金partly supported by the National Natural Science Foundation of China (Nos.11133007 and 11573063)the Science Foundation of Yunnan Province (Grant No.2012HC011)
文摘In this paper,CCD photometric light curves for the short-period eclipsing binary 1 SWASP J140533.33＋114639.1（hereafter J1405） in the BV R bands are presented and analyzed using the 2013 version of the Wilson-Devinney（W-D） code. It is discovered that J1405 is a W-subtype shallow contact binary with a contact degree of f = 7.9±0.5% and a mass ratio of q = 1.55±0.02. In order to explain the asymmetric light curves of the system,a cool starspot on the more massive component is employed. This shallow contact eclipsing binary may have been formed from a short-period detached system through orbital shrinkage due to angular momentum loss. Based on the（O-C） method,the variation of orbital period is studied using all the available times of minimum light. The（O-C） diagram reveals that the period is increasing continuously at a rate of d P/dt = ＋2.09×10^-7 d yr^-1,which can be explained by mass transfer from the less massive component to the more massive one.
基金supported by the National Natural Science Foundation of China(Grant No.11325315)
文摘BH Cen is a short-period early-type binary with a period of 0.792^d in the extremely young star-forming cluster IC 2944. New multi-color CCD photometric light curves in U, B, V, R and I bands are presented and are analyzed by using the Wilson-Devinney code. It is detected that BH Cen is a high-mass-ratio overcontact binary with a fill-out factor of 46.4% and a mass ratio of 0.89. The derived orbital inclination i is 88.9 degrees, indicating that it is a totally eclipsing binary and the photometric parameters can be determined reliably. By adding new eclipse times, the orbital period changes in the binary are analyzed. It is confirmed that the period of BH Cen shows a long-term increase while it undergoes a cyclic oscillation with an amplitude of A3 = 0.024 d and a period of P3 = 50.3 yr. The high mass ratio, overcontact configuration and long-term continuous increase in the orbital period all suggest that BH Cen is in the evolutionary state after the shortest-period stage of Case A mass transfer.The continuous increase in period can be explained by mass transfer from the secondary component to the primary one at a rate of˙M2 = 2.8×10^-6 M⊙per year. The cyclic change can be plausibly explained by the presence of a third body because both components in the BH Cen system are early-type stars. Its mass is determined to be no less than 2.2 M⊙ at an orbital separation of about 32.5 AU. Since no third light was found during the photometric solution, it is possible that the third body may be a candidate for a compact object.
基金Supported in Part by a Grant from the National Nature Science Foundation of China(No.30672126)
文摘Objective:To investigate the vasculogenic mimicry formation induced by hypoxia in Ⅱ-Ⅲ human glioma cell and the effect of alphastatin peptide suppressing the hypoxia-induced vasculogenic mimicry formation and the mechanism.Methods:MTT,Transwell and three-dimentional culture were used to detect the proliferation,migration and tubule formation of SHG44.The expression of vascular endothelial growth factor-α(VEGF-α),erythropoietin-producing hepatocellular carcinoma-A2 (EphA2) and matrix metalloproteinases 2 (MMP2) was detected by RT-PCR and Western blotting analysis.Results:The OD 490 in hypoxia group was 0.60±0.06 and in control group was 0.46±0.05.The number of cell migration was 178.71±18.81 in hypoxia group and 85.86±17.92 in control group.The tubule formation was 56.80±12.21 in hypoxia group and 4.20±2.62 in control group.The proliferation,migration and tubule formation in hypoxia group were significantly higher than that in control group.The expression of VEGF-α,EphA2 and MMP2 was upregulated in hypoxia.When various concentrations of alphastatin (100,1 000,10 000 nmol/L) were added to hypoxia group,the numbers of cell migration were 142.57±12.12,92.71±17.68,30.00±7.72 and the tubule formation were 47.71±10.58,18.86±8.40,8.43±5.62.The cell migration and tubule formation were significantly suppressed by alphastatin in a dose-dependent manner.In alphastatin group,the phosphorylation of EphA2 protein (P=0.037,F=4.629) and activation of MMP2 protein (P=0.005,F=9.331) were significantly suppressed but there was no change in VEGF-α protein.Conclusion:Ⅱ-Ⅲ human glioma cell is able to form vasculogenic mimicry induced by hypoxia and alphastatin peptide can suppress the hypoxia-induced vasculogenic mimicry.VEGF-α induced EphA2 phospharilation and MMP2 activation maybe the key pathway to form vasculogenic mimicry.
基金supported by the National Key Basic Research Program of China (Grant No. 2014CB845700)the National Natural Science Foundation of China (Grant Nos. 11390371 and 11233004)The Guo Shou Jing Telescope (the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, LAMOST) is a National Major Scientific Project built by the Chinese Academy of Sciences. Funding for the project has been provided by the National Development and Reform Commission
文摘We present a catalog including 11 204 spectra of 10436 early-type emission-line stars from LAMOST DR2, among which 9752 early-type emission-line spectra are newly discovered. For these early- type emissionqine stars, we discuss the morphological and physical properties of their low-resolution spectra. In this spectral sample, the Hα emission profiles display a wide variety of shapes. Based on the Hα line profiles, these spectra are categorized into five distinct classes： single-peak emission, single-peak emission in absorption, double-peak emission, double-peak emission in absorption, and P-Cygni profiles. To better understand what causes the Hc~ line profiles, we divide these objects into four types from the perspective of physical classification, which include classical Be stars, Herbig Ae/Be stars, close binaries and spectra contaminated by H n regions. The majority of Herbig Ae/Be stars and classical Be stars are identified and separated using a （H-K, K-W1） color-color diagram. We also discuss 31 binary systems that are listed in the SIMBAD on-line catalog and identify 3600 spectra contaminated by HⅡ regions after cross-matching with positions in the Dubout-Crillon catalog. A statistical analysis of line profiles versus classifications is then conducted in order to understand the distribution of Hc~ profiles for each type in our sample. Finally, we also provide a table of 172 spectra with Fen emission lines and roughly calculate stellar wind velocities for seven spectra with P-Cygni profiles.
基金herein for allowing the use of various data from the LBJ Project in the development of this paper
文摘The complexity of the IH-635 Managed Lanes Project, located in Dallas County, Texas, posed several technical and constructive challenges, leading to the adoption of solutions different from the traditional. Two alternative solutions for the pier cap on one of the bridge crossings over IH-35E in the IH-635 project were analyzed in this case study, a cast-in-place post-tensioned concrete cap and an innovative prefabricated steel-concrete com- posite cap. The approach was to use an estimation of direct costs for material and labor and consideration of con- struction time schedules. A supplementary numerical modeling confirmed that both alternatives behave elasti- cally under imposed loads. The direct cost of material and labor for the two alternatives were close. However, the composite alternative required 13 days less construction time, resulting in substantial cost savings from traffic closing in the very busy traffic corridor. Traffic closing costs were substantially higher than the direct costs, especially for the post-tensioned cap. The quantification of the benefits allows more confidence in the utilization of the composites caps, leading to faster completion of bridge projects and substantial economic savings.
