Effects of Cu and Co additions on the crystallization and magnetic properties of FeNbB alloy

The nanocrystalline-forming element Cu and magnetic element Co are commonly used as additive elements to tune the structure and improve the properties of alloys.In this study,four kinds of amorphous alloys,Fe_(72)Nb_(12)B_(16),Fe_(72)Nb_(12)B_(15)Cu_(1),Fe_(36)Co_(36)Nb_(12)B_(16),and Fe_(36)Co_(36)Nb_(12)B_(15)Cu_(1),were prepared by melt-spinning and annealed at various temperatures to investigate the effects of Cu and Co additions,individually and in combination,on the crystallization and magnetic properties of Fe_(72)Nb_(12)B_(16)alloy.The four kinds of alloys exhibited different crystallization behaviors with different primary crystallization phases observed.For the Fe_(72)Nb_(12)B_(16)alloy,only theα-Mn-type metastable phase formed after annealing.The addition of 1 at.%Cu and 36 at.%Co led to the observation of theα-Mn-type andβ-Mn-type metastable phases,respectively,and a reduction in the crystallization volume fraction in the metastable phase.The Fe_(36)Co_(36)Nb_(12)B_(15)Cu_(1)alloy only exhibitedα-Fe(Co)phase as a primary phase,and the addition of both Cu and Co completely inhibited the precipitation of the metastable phase.Cu clusters were found in energy dispersive spectroscopy elemental maps.Compared with other alloys,Fe_(36)Co_(36)Nb_(12)B_(15)Cu_(1)alloy with both Cu and Co exhibited a lower coercivity(Hc)below 973 K.

Effect of Co on Microstructure and Stress Rupture Properties of K4750 Alloy

The effects of substituting Co for Fe on the microstructure and stress rupture properties of K4750 alloy were studied.The microstructure of the alloy without Co(K4750 alloy)and the alloy containing Co(K4750-Co alloy)were analyzed.Substitution of Co for Fe inhibited the decomposition of MC carbide and the precipitation ofηphase during long-term aging treatment.In K4750-Co alloy,the morphology of MC carbide at the grain boundary(GB)remained dispersed blocky shape and noηphase was observed after aging at 750℃ for 3000 h.However,in K4750 alloy,almost all the MC carbides at GBs broke down into granular M23C6 carbide and needle-likeηphase.The addition of cobalt could delay the decomposition of MC carbides,which accordingly restricted the elemental supply for the formation ofηphase.The stress rupture tests were conducted on two alloys at 750℃/430 MPa.When Co is substituted for Fe in K4750 alloy,the stress rupture life increased from 164.10 to 264.67 h after standard heat treatment.This was mainly attributed to increased concentration of Al,Ti and Nb inγ’phase in K4750-Co alloy,which further enhanced the strengthening effect ofγ’phase.After aging at 750℃ for 3000 h,substitution of Co for Fe can also cause the stress rupture life at 750℃/430 MPa to increase from 48.72 to 208.18 h.The reason was mainly because MC carbide degradation andηphase precipitation in K4750 alloy,which promoted the initiation and propagation of micro-crack during stress rupture testing.

基于计量经济方法的清洁发展机制协同效应和额外性研究

通过建立SO2排放量的参数估计方程,引入profile-kernel估计方法对参数估计,评估CDM项目的 SO2排放的协同效应,并进一步识别和判断CDM项目的额外性。以中国实际CDM项目为例研究发现,CDM项目SO2减排的协同效应并不十分显著,这也对其额外性带来了一定的挑战,意味着即使没有CDM项目资金的支持,项目仍会发生。