Tomographic PIV investigation on coherent vortex structures over shark-skin-inspired drag-reducing riblets

Nature has shown us that the microstructure of the skin of fast-swimming sharks in the ocean can reduce the skin friction drag due to the well-known shark-skin effect.In the present study,the effect of shark-skin-inspired riblets on coherent vortex structures in a turbulent boundary layer（TBL） is investigated.This is done by means of tomographic particle image velocimetry（TPIV） measurements in channel fl ws over an acrylic plate of drag-reducing riblets at a friction Reynolds number of 190.The turbulent fl ws over drag-reducing riblets are verifie by a planar time-resolved particle image velocimetry（TRPIV） system initially,and then the TPIV measurements are performed.Two-dimensional（2D） experimental results with a dragreduction rate of around 4.81% are clearly visible over triangle riblets with a peak-to-peak spacing s＋of 14,indicating from the drag-reducing performance that the buffer layer within the TBL has thickened;the logarithmic law region has shifted upward and the Reynolds shear stress decreased.A comparison of the spatial topological distributions of the spanwise vorticity of coherent vortex structures extracted at different wall-normal heights through the improved quadrant splitting method shows that riblets weaken the amplitudesof the spanwise vorticity when ejection（Q2） and sweep（Q4） events occur at the near wall,having the greatest effect on Q4 events in particular.The so-called quadrupole statistical model for coherent structures in the whole TBL is verified Meanwhile,their spatial conditional-averaged topological shapes and the spatial scales of quadrupole coherent vortex structures as a whole in the overlying turbulent fl w over riblets are changed,suggesting that the riblets dampen the momentum and energy exchange between the regions of near-wall and outer portion of the TBL by depressing the bursting events（Q2 and Q4）,thereby reducing the skin friction drag.

Generation and propagation of partially coherent vortex beams

The generation and propagation of partially coherent vortex beams have been investigated experimentally.It is found that a vortex beam with more uniform intensity distribution can be obtained by decreasing the coherence of the beam.We find that the beam shape of a completely coherent beam will keep hollow profile invariant during its propagation in free space.However,the center of the beam turns to be blurred for a partially coherent vortex beam on propagation.It is also found that the beam spreads more rapidly for the vortex beam with lower coherence,and this influence can be decreased by increasing the topological charge of the vortex beam.

Coherence vortices of partially coherent beams in the far field

Based on the propagation law of cross-spectral density function, studied in this paper are the coherence vortices of partially coherent, quasi-monochromatic singular beams with Gaussian envelope and Schell-model correlator in the far field, where our main attention is paid to the evolution of far-field coherence vortices into intensity vortices of fully coherent beams. The results show that, although there are usually no zeros of intensity in partially coherent beams with Gaussian envelope and Schell-model correlator~ zeros of spectral degree of coherence exist. The coherence vortices of spectral degree of coherence depend on the relative coherence length, mode index and positions of pairs of points. If a point and mode index are kept fixed, the position of coherence vortices changes with the increase of the relative coherence length. For the low coherent case there is a circular phase dislocation. In the coherent limit coherence vortices become intensity vortices of fully coherent Laguerre-Gaussian beams.

Antisymmetric quadrupole mode of coherent structures in wall-bounded turbulence

Abstract Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry （Tomo-TRPIV）. The Reynolds number Reo is 2 460 on the base of momentum thickness. According to the physical mechanism of the stretch and compression of multi-scale vortex structures in the wall-bounded turbulence, the topological characteristics of turbulence statistics in logarithmic layer were illustrated by local-averaged velocity structure function. During coherent structures bursting, results reveal that the topological structures of velocity gradients, velocity strain rates and vorticities behave as antisymmetric quadrupole modes. A three-layer antisymmetric quadrupole vortex packet confirms that there is a tight relationship between the outer layer and the near-wall layer.

Subthermocline eddies carrying the Indonesian Throughflow water observed in the southeastern tropical Indian Ocean

We observed a subthermocline eddy(STE)with a cold and fresh core during an observation cruise along a transect of 10°S in the southeastern tropical Indian Ocean(SETIO)in December 2017.The vertical scale,speed radius,and maximum swirl velocity of the STE were about 200 m,55 km,and 0.5 m/s,respectively.The mean Rossby number and Burger number of the STE were then estimated to be about−0.7 and 2.4,indicating the STE was a submesoscale coherent vortex.The STE core water had characteristics of the Indonesian Throughflow(ITF)water and was distinct from that of surrounding areas.By examining Argo float data,another STE was well captured by five successive profiles of the same Argo float.Both STEs showed significant temperature and salinity anomalies at theσ0=26.0-26.5 kg/m3 surfaces.With the assumption that the low-salinity ITF water parcels could be carried only by surface eddies and the STEs,the Argo profiles,which detected low-salinity ITF water and were located outside a surface eddy,were believed to be inside an STE and were used to analyze the distribution,origin,and generation mechanism of the STE.The results suggested that the STEs carrying ITF water may be generated under topography-current interaction at the eastern coastal waters or under front-induced subduction in the area away from coastal waters.Those STEs may be widely distributed in the SETIO and may play a role in ITF water parcel transport.

Wavy structures in compressible mixing layers

Semi-periodic structures namely inclined wavy structures （IWS） are experimentally observed in compressible mixing layers at two convective Mach numbers （Mc = 0.11 and 0.47）. Flow structures are visualized by the laserinduced planar laser Mie scattering （PLMS） technique. Two methods are developed to investigate the spatial distribu- tion and geometry of IWS： （1） the dominant mode extrac- tion （DME） method, to extract the dominant modes of IWS from the streamwise gray-level fluctuation, and （2） the phase tracking （PT） method, to identify the shape of IWS. The re- sults suggest that pressure perturbations account for the for- marion of IWS in the initial mixing region and the joint effect of dilatation and coherent vortices enhances IWS in the well- developed region. The large transverse （cross-flow） scale of the IWS and their relation to coherent vortices （CV） indicate that the disturbance originated from CV in the mixing center propagates far into the free streams. The DME and the PT method are shown to be the effective tools to study the geometrical features of wavy structures in compressible shear flows.

Characterization of tightly focused partially coherent radially polarized vortex beams

Tight focusing properties of partially coherent radially polarized vortex beams are studied based on vectorial Debye theory.We focus on the focal properties including the intensity and the partially coherent and polarized properties of such partially coherent vortex beams through a high numerical aperture objective. It is found that the source coherence length and the maximal numerical aperture angle have direct influence on the focal intensity,as well as coherence and polarization properties.This research is important in optical micromanipulation and beam shaping.

Identification, characterization and evolution of non-local quasi-Lagrangian structures in turbulence

The recent progress on non-local Lagrangian and quasi-Lagrangian structures in turbulence is reviewed.The quasi-Lagrangian structures, e.g., vortex surfaces in viscous flow, gas-liquid interfaces in multi-phase flow, and flame fronts in premixed combustion, can show essential Lagrangian following properties, but they are able to have topological changes in the temporal evolution. In addition,they can represent or influence the turbulent flow field. The challenges for the investigation of the non-local structures include their identification, characterization, and evolution.The improving understanding of the quasi-Lagrangian structures is expected to be helpful to elucidate crucial dynamics and develop structure-based predictive models in turbulence.

Preliminary control of the air entrainment in bow wave based on the Liutex force method

Trails induced by air entrainment of bow wave breaking can be observed clearly around an advancing ship,making it prong to be detected and causing reduction in hydrodynamic performance.In breaking bow wave region,different scale of coherent vortex structures related closely to the air entrainment are generated.The formation and evolution of bubble clouds can be accounted partly by the swirling vortex flow of the jet plunging.In this work,high-fidelity simulation of the bow wave breaking around a rectangular thin plate is performed with the in-house code BAMR-SJTU.A Liutex force model is constructed to investigate the interaction between the free surface and vortices,and to explore the possibility of alleviating or controlling the air entrainment.This study is the first attempt to manipulate vortices corresponding to the air entrainment of the bow wave breaking.Some typical vortex structures based on the Liutex vortex identification method and the distribution of the vortex force are presented.Comparison of the vortex structures and the entrapped bubbles is conducted to illustrate the efficiency of Liutex force model in air entrainment control.

Comparison of Reynolds Averaged Navier-Stokes Based Simulation and Large-eddy Simulation for One Isothermal Swirling Flow

The flow structure of one isothermal swirling case in the Sydney swirl flame database was studied using two numerical methods. Results from the Reynolds-averaged Navier-Stokes (RANS) approach and large eddy simulation (LES) were compared with experimental measurements. The simulations were applied in two different Cartesian grids which were investigated by a grid independence study for RANS and a post-estimator for LES. The RNG k-ε turbulence model was used in RANS and dynamic Smagorinsky-Lilly model was used as the sub-grid scale model in LES. A validation study and cross comparison of ensemble average and root mean square (RMS) results showed LES outperforms RANS statistic results. Flow field results indicated that both approaches could capture dominant flow structures, like vortex breakdown (VB), and precessing vortex core (PVC). Streamlines indicate that the formation mechanisms of VB deducted from the two methods were different. The vorticity field was also studied using a velocity gradient based method. This research gained in-depth understanding of isothermal swirling flow.