Neural Dynamics for Distributed Collaborative Control of Manipulators With Time Delays

Time-delay phenomena extensively exist in practical systems,e.g.,multi-agent systems,bringing negative impacts on their stabilities.This work analyzes a collaborative control problem of redundant manipulators with time delays and proposes a time-delayed and distributed neural dynamics scheme.Under assumptions that the network topology is fixed and connected and the existing maximal time delay is no more than a threshold value,it is proved that all manipulators in the distributed network are able to reach a desired motion.The proposed distributed scheme with time delays considered is converted into a time-variant optimization problem,and a neural dynamics solver is designed to solve it online.Then,the proposed neural dynamics solver is proved to be stable,convergent and robust.Additionally,the allowable threshold value of time delay that ensures the proposed scheme’s stability is calculated.Illustrative examples and comparisons are provided to intuitively prove the validity of the proposed neural dynamics scheme and solver.

Collaborative Control of Novel Uninterrupted Propulsion System for All-Climate Electric Vehicles

Over the past decade,the electric vehicle industry of China has developed rapidly,reaching one of the highest technological levels in the world.Nevertheless,most electric buses currently serve urban areas,being unsuitable for all-climate operations.In response to the objective of massively adopting electric vehicles for transportation during all the events of the 2022 Beijing Winter Olympics,a dual-motor coaxial propulsion system for all-climate electric vehicles is proposed.The system aims to meet operating requirements such as high speed and adaptability to mountainous roads under severely cold environments.The system provides three operating modes,whose characteristics are analyzed under different conditions.In addition,dual-motor collaborative control strategy with collaborative gearshift and collaborative power distribution is proposed to eliminate power interruption during gearshift process and achieve intelligent power distribution,thus improving the gearshift quality and reducing energy consumption.Finally,gear position calibration for all-climate operation and proper gearshift is introduced.Experimental results demonstrate the advantages of the proposed dual-motor coaxial propulsion system regard-ing gearshift compared with the conventional single-motor automatic transmission.

Theory,technology and application of grouted bolting in soft rock roadways of deep coal mines

The grouted bolt,combining rock bolting with grouting techniques,provides an effective solution for controlling the surrounding rock in deep soft rock and fractured roadways.It has been extensively applied in numerous deep mining areas characterized by soft rock roadways,where it has demonstrated remarkable control results.This article systematically explores the evolution of grouted bolting,covering its theoretical foundations,design methods,materials,construction processes,monitoring measures,and methods for assessing its effectiveness.The overview encompassed several key elements,delving into anchoring theory and grouting reinforcement theory.The new principle of high pretensioned high-pressure splitting grouted bolting collaborative active control is introduced.A fresh method for dynamic information design is also highlighted.The discussion touches on both conventional grouting rock bolts and cable bolts,as well as innovative grouted rock bolts and cables characterized by their high pretension,strength,and sealing hole pressure.An examination of the merits and demerits of standard inorganic and organic grouting materials versus the new inorganic–organic composite materials,including their specific application conditions,was conducted.Additionally,the article presents various methods and instruments to assess the support effect of grouting rock bolts,cable bolts,and grouting reinforcement.Furthermore,it provides a foundation for understanding the factors influencing decisions on grouted bolting timing,the sequence of grouting,the pressure applied,the volume of grout used,and the strategic arrangement of grouted rock bolts and cable bolts.The application of the high pretensioned high-pressure splitting grouted bolting collaborative control technology in a typical kilometer-deep soft rock mine in China—the soft coal seam and soft rock roadway in the Kouzidong coal mine,Huainan coal mining area,was introduced.Finally,the existing problems in grouted bolting control technology for deep soft rock roadways are analyzed,and the future development trend of grouted bolting control technology is anticipated.

Research on Distributed Cooperative Control Strategy of Microgrid Hybrid Energy Storage Based on Adaptive Event Triggering

Distributed collaborative control strategies for microgrids often use periodic time to trigger communication,which is likely to enhance the burden of communication and increase the frequency of controller updates,leading to greater waste of communication resources.In response to this problem,a distributed cooperative control strategy triggered by an adaptive event is proposed.By introducing an adaptive event triggering mechanism in the distributed controller,the triggering parameters are dynamically adjusted so that the distributed controller can communicate only at a certain time,the communication pressure is reduced,and the DC bus voltage deviation is effectively reduced,at the same time,the accuracy of power distribution is improved.The MATLAB/Simulink modeling and simulation results prove the correctness and effectiveness of the proposed control strategy.

PI control based on fuzzy set-point weighting tracking for hydraulic crane boom system

A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system （HCBS）. Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator（LSI）, are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved.

Framework and Key Technologies of Human-machine Hybrid-augmented Intelligence System for Large-scale Power Grid Dispatching and Control

With integration of large-scale renewable energy,new controllable devices,and required reinforcement of power grids,modern power systems have typical characteristics such as uncertainty,vulnerability and openness,which makes operation and control of power grids face severe security challenges.Application of artificial intelligence(AI)technologies represented by machine learning in power grid regulation is limited by reliability,interpretability and generalization ability of complex modeling.Mode of hybrid-augmented intelligence(HAI)based on human-machine collaboration(HMC)is a pivotal direction for future development of AI technology in this field.Based on characteristics of applications in power grid regulation,this paper discusses system architecture and key technologies of human-machine hybrid-augmented intelligence(HHI)system for large-scale power grid dispatching and control(PGDC).First,theory and application scenarios of HHI are introduced and analyzed;then physical and functional architectures of HHI system and human-machine collaborative regulation process are proposed.Key technologies are discussed to achieve a thorough integration of human/machine intelligence.Finally,state-of-theart and future development of HHI in power grid regulation are summarized,aiming to efficiently improve the intelligent level of power grid regulation in a human-machine interactive and collaborative way.

Collaborative force and shape control for large composite fuselage panels assembly

This study proposed a force and shape collaborative control method that combined method of influence coefficients(MIC)and the elitist nondominated sorting genetic algorithm(NSGA-II)to reduce the shape deviation caused by manufacturing errors,gravity deformation,and fixturing errors and improve the shape accuracy of the assembled large composite fuselage panel.This study used a multi-point flexible assembly system driven by hexapod parallel robots.The proposed method simultaneously considers the shape deviation and assembly load of the panel.First,a multi-point flexible assembly system driven by hexapod parallel robots was introduced,with the relevant variables defined in the control process.In addition,the corresponding mathematical model was constructed.Subsequently,MIC was used to establish the prediction models between the displacements of actuators and displacements of panel shape control points,deformation loads applied by the actuators.Following the modeling,the shape deviation of the panel and the assembly load were used as the optimization objectives,and the displacements of actuators were optimized using NSGA-II.Finally,a typical composite fuselage panel case study was considered to demonstrate the effectiveness of the proposed method.

Formation Flight Control and Cooperative Obstacle Avoidance of Multiple UAVs

This paper primarily focuses on the obstacle avoidance issue of followers in unmanned aerial vehicle(UAV)formation flight while considering formation constraints.Based on consensus theory and the artificial potential field(APF)principle,a new fusion UAV formation control algorithm is proposed.The method employs a formation control strategy that combines the leader-following method and the virtual structure method,enabling the generation,maintenance and transformation of the formation through the utilization of a consensus controller.In response to the specific problem of the follower within the formation entering the no-fly zone and the self-collision among UAVs,APF-based formation path replanning and self-collision prevention algorithms are introduced.The simulation results demonstrate the effectiveness of the proposed algorithm.

An authorization model for collaborative access control

Collaborative access control is receiving growing attention in both military and commercial areas due to an urgent need to protect confidential resources and sensitive tasks.Collaborative access control means that multiple subjects should participate to make access control decisions to prevent fraud or the abuse of rights.Existing approaches to access control cannot satisfy the requirements of collaborative access control.To address this concern,we propose an authorization model for collaborative access control.The central notions of the model are collaborative permission,collaboration constraint,and collaborative authorization policy,which make it possible to define the collaboration among multiple subjects involved in gaining a permission.The implementation architecture of the model is also provided.Furthermore,we present effective conflict detection and resolution methods for maintaining the consistency of collaborative authorization policies.

Unmanned autonomous air-to-air refueling intelligent docking technology

Unmanned autonomous Air-to-Air Refueling(AAR)capability is the key guarantee to support the distant-field,high-intensity and durable operations of the penetration counterair combat system.In the future,the long-range unmanned reconnaissance and attack platform can reach the maximum flight range requirement through AAR.At present,large transport aircraft platforms in China are still equipped with probe-and-drogue systems,and the refueling mode is gradually changing from manned to unmanned autonomous operation.The docking process is the riskiest and most important part,and there are strict safety,precision,and efficiency requirements for refueling operation,especially during close-distance docking and formation maintenance phases.In this paper,five issues that need to be solved to achieve autonomous AAR docking are summarized.On this basis,five key technology development needs are proposed to solve these engineering issues.Finally,some prospects are given.

Research on key technologies of UAV cluster cooperative system for Internet of Things applications

The combat tasks faced by UAVs are becoming more and more complex.Traditional single UAVs are limited by the constraints of platform load capacity,lightweight load,and insufficient lowpower equipment,so it is difficult to complete complex tasks independently.Aiming at typical UAV collaborative confrontation application scenarios,this paper constructs a multi-agentoriented cluster collaborative intelligent system architecture and establishes a swarm-oriented intelligent UAV cluster collaborative control algorithm.Moreover,this paper forms a simulation environment for UAV cluster collaborative confrontation and completes the design and implementation of the UAV cluster collaborative confrontation system based on swarm intelligence.In addition,this paper analyses the key technologies of the UAV cluster collaborative system with the support of the Internet of Things technology and verifies the performance of the system after constructing the corresponding system.The experimental results show that the system constructed in this paper is effective.

Energy Management and Operational Control Methods for Grid Battery Energy Storage Systems

Energy storage is one of the key means for improving the flexibility,economy and security of power system.It is also important in promoting new energy consumption and the energy Internet.Therefore,energy storage is expected to support distributed power and the micro-grid,promote open sharing and flexible trading of energy production and consumption,and realize multi-functional coordination.In recent years,with the rapid development of the battery energy storage industry,its technology has shown the characteristics and trends for large-scale integration and distributed applications with multi-objective collaboration.As a grid-level application,energy management systems(EMS)of a battery energy storage system(BESS)were deployed in real time at utility control centers as an important component of power grid management.Based on the analysis of the development status of a BESS,this paper introduced application scenarios,such as reduction of power output fluctuations,agreement to the output plan at the renewable energy generation side,power grid frequency adjustment,power flow optimization at the power transmission side,and a distributed and niohile energy storage system at the power distribution side.The studies and application status of a BESS in recent years were reviewed.The energy management,operation control methods,and application scenes of large-scale BESSs were also examined in the study.

Task Planning and Collaboration of Jellyfish-inspired Multiple Spherical Underwater Robots

Task planning and collaboration of multiple robots have broad application prospects and value in the field of robotics.To improve the performance and working efficiency of our Spherical Underwater Robot(SUR),we propose a multi-robot control strategy that can realize the task planning and collaboration of multiple robots.To complete real-time information sharing of multiple robots,we first build an acoustic communication system with excellent communication performance under low noise ratio conditions.Then,the task planning and collaboration control strategy adjust the SURs so that they maintain their positions in the desired formation when the formation moves.Multiple SURs can move along desired trajectories in the expected formation.The control strategy of each SUR uses only its information and limited information of its neighboring SURs.Finally,based on theoretical analysis and experiments,we evaluate the validity and reliability of the proposed strategy.In comparison to the traditional leader–follower method,it is not necessary to designate a leader and its followers explicitly in our system;thus,important advantages,such as fault tolerance,are achieved.