The collision experiment between rolling stones of different shapes and protective cushion in open-pit mines

Though gravel cushions are used worldwide in open-pit mines and railway slopes to control the impact of rolling stones,no universal technical standards have been put in place to guide engineers in their correct design,and few laboratory test results are available with which to characterize collisions between rolling stones and a gravel cushion.We carried out a large number of experiments in which rolling stones made of the same material but differently shaped were dropped from various heights onto cushions with various particle sizes and thicknesses.We investigated the characteristics of the resulting collisions,and the relationships between coefficients of restitution(CORs)of blocks with different shape and release height H,cushion thickness h and particle diameter d are obtained through linear fitting method.Orthogonal testing reveals the relative influence of block shape,release height,and the particle size and thickness of the cushion on the collision characteristics,which can assist engineers in designing a gravel cushion suitable to the distribution and weathering characteristics of rolling stones in a specific area.

Making Use of the Eddy Currents Effect in the Examination of the Tribological Characteristics of Strip Rolling Mill Rolls

The key element in the proper performance of a rolling mill is the careful planning of the rolls operational conditions, since this factor constitutes the restricting element in the manufacturing process. In the article, a collection of operation and research steel strips hot-rolling mill information was presented, which was processed based on the advanced computer programmes for rolls grinders. The research outcomes were produced, presenting the application of eddy currents to detect materials flaws in metallurgical mill rolls.

STUDY OF ROLLING FORCE DISTRIBUTION ALONG THE ROLLING OF PAIR CROSS MILL

The theory of three-dimensional deformation is used.Based on rigid plastic assumption, the theory of stick friction and the sheet crown curve at the entry and the exit are used. The mathematical analytical formula of the rolling force in lateral distribution is deriven.

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying alloys.In this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot rolling.The microstructure and mechanical properties under different process paramet-ers were investigated.Optical microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening mechanism.The results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering temperature.The block was hot rolled at 1200℃ with an 80%reduction under only two passes without annealing.The strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain boundaries.After hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

Tailoring the texture and mechanical properties of 3%Y_(2)O_(3)p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing

3%Y_(2)O_(3)p/ZGK200 composites were subjected to unidirectional rolling(UR)and cross rolling(CR)at 400℃and 350℃followed by annealing at 300℃for 1 h.The microstructure,texture and mechanical properties of rolled and annealed composites were systematically studied.The rolled composites exhibited a heterogeneous microstructure,consisting of deformed grains elongated along rolling direction(RD)and Y_(2)O_(3)particles bands distributed along RD.After annealing,static recrystallization(SRX)occurred and most deformed grains transformed into equiaxed grains.A non-basal texture with two strong T-texture components was obtained after UR while a non-basal elliptical/circle texture with circle multi-peaks was obtained after CR,indicating that rolling path had great influences on texture of the composites.After annealing process,R-texture component disappeared or weakened,as results,a non-basal texture with double peaks tilting from normal direction(ND)to transverse direction(TD)and a more random non-basal texture with circle multi-peaks were obtained for UR and CR composites,respectively.The yield strength of rolled composites after UR showed obvious anisotropy along RD and TD while a low anisotropic yield strength was obtained after CR.Some Y_(2)O_(3)particles broke during rolling.The fracture of the composites was attributed to the existence of Y_(2)O_(3)clusters and interfacial debonding between particles and matrix during tension,as a result,the ductility was not as superior as matrix alloy.

Unveiling the rolling texture variations ofα-Mg phases in a dual-phase Mg-Li alloy

LZ91 Mg-Li alloy plates with three types of initial texture were rolled by 70%reduction at both room temperature and 200℃to explore the rolling texture formation ofα-Mg phase.The results showed that the rolling texture is largely affected by the initial texture.All the samples exhibited two main texture components as RD-split double peaks texture and TD-split double peaks texture after large strain rolling.The intensity of the two texture components was strongly influenced by the initial orientation and rolling temperature.Extension twinning altered the large-split non-basal orientation to a near basal one at low rolling strain.The basal orientation induced by twinning is unstable,which finally transmitted to the RD-split texture.The strong TD-split texture formed due to slip-induced orientation transition from its initial orientation.The competition between prismatic and basal slip determined the intensity and tilt angle of the TD-split texture.By increasing the rolling temperature,the TD-split texture component was enhanced in all three samples.Limitation of extension twinning behavior and the promotion of prismatic slip at elevated temperature are the main reasons for the difference in hot and cold rolling texture.

Design,preparation,microstructure and mechanical property of the lightweight radiation-shielding Mg-Ta-Al composites basing differential temperature hot rolling

A novel lightweight,radiation-shielding Mg-Ta-Al layered metal-matrix composite(LMC)was successful designed by doping the extremely refractory metal(Ta)into Mg sheets.These Mg-based LMCs sheets shows excellent radiation-dose shield effect,about 145 krad·a^(−1),which is about 17 times of traditional Mg alloy,while its surface density is only about 0.9 g·cm^(−2),reducing by 60%than that of pure Ta.The quantitate relationship between radiation-dose and the materials’thickness was also confirmed to the logistic function when the surface density is in the range of 0.6-1.5 g·cm^(−2).Meantime,the rolling parameters,interface microstructure and mechanical properties in both as-rolled and annealing treated samples were evaluated.The sheets possess a special dissimilar atoms diffusion transitional zone containing an obvious inter-diffusion Mg-Al interface and the unique micro-corrugated Ta-Al interface,as well as a thin Al film with a thickness of about 10μm.The special zone could reduce the stress concentration and enhance the strength of Mg-Ta-Al LMCs.The interface bonding strength reaches up to 54-76 MPa.The ultimate tensile strength(UTS)and yield strength(TYS)of the Mg-Ta-Al sheet were high to 413 MPa and 263 MPa,respectively,along with an elongation of 5.8%.The molecular dynamics(MD)analysis results show that the two interfaces exhibit different formation mechanism,the Mg-Al interface primarily depended on Mg/Al atoms diffusion basing point defects movement,while the Ta-Al interface with a micro-interlock pining shape formed by close-packed planes slipping during high temperature strain-induced deformation process.

Multi-dimension and multi-modal rolling mill vibration prediction model based on multi-level network fusion

Mill vibration is a common problem in rolling production,which directly affects the thickness accuracy of the strip and may even lead to strip fracture accidents in serious cases.The existing vibration prediction models do not consider the features contained in the data,resulting in limited improvement of model accuracy.To address these challenges,this paper proposes a multi-dimensional multi-modal cold rolling vibration time series prediction model(MDMMVPM)based on the deep fusion of multi-level networks.In the model,the long-term and short-term modal features of multi-dimensional data are considered,and the appropriate prediction algorithms are selected for different data features.Based on the established prediction model,the effects of tension and rolling force on mill vibration are analyzed.Taking the 5th stand of a cold mill in a steel mill as the research object,the innovative model is applied to predict the mill vibration for the first time.The experimental results show that the correlation coefficient(R^(2))of the model proposed in this paper is 92.5%,and the root-mean-square error(RMSE)is 0.0011,which significantly improves the modeling accuracy compared with the existing models.The proposed model is also suitable for the hot rolling process,which provides a new method for the prediction of strip rolling vibration.

Study of the Characteristics of Large-Diameter Iron Bars Obtained by Rolling at the ODHAV Foundry in the Republic of Guinea

This work consists of evaluating the quality of the mechanical parameters of large-diameter steels, i.e. 20, 25, 28 and 32, through a process of recycling scrap metal that fills garages, rubbish dumps, gutters and other abandoned sites, as well as imported concrete reinforcing steel sold in the Republic of Guinea. To carry out this important work, a number of mechanical tensile and bending tests and a microscopic analysis combining two devices, an electron microscope and a photographic camera, were carried out. The samples were taken from sampling areas in the major communes of Conakry, namely: Casse Sonfonia, Matoto and Kagbélen. The tensile strength values of the large dimensions 20, 25, 28 and 32 are given in the tables.

Development of the rolling extrusion rock bolt with constant resistance and large deformation

With the increasing excavation depth of underground engineering,engineering problems such as large deformation and rock burst caused by high geo-stress brings new challenges to the excavation and reinforcement of surrounding rock in deep underground engineering.The traditional rock bolt is prone to brittle fracture under high geo-stress due to its low elongation.Therefore,this work aims to develop a novel energy-absorbing bolt with constant resistance and large displacement to reinforce the surrounding rock with a risk of large deformation or rockburst.The novel energy-absorbing bolt refereed as rolling extrusion rock bolt(RE bolt)is mainly consists of sleeve tube with a variable cross-section,energy absorption slider with steel balls embedded,steel bar connected with the energy absorption slider.The rolling extrusion is adopted to produce the resistance force of the RE bolt,which avoids the sudden attenuation of resistance force and the abrasion of the energy absorption slider.The static pull test is conducted to study the resistance force and deformation characteristics of the RE bolt with different specifications.Results imply that the RE bolt has higher resistance force,larger deformation capacity and energy absorption capacity.The work of this study provides an effective solution for the reinforcement of surrounding rock in deep rock engineering.

Analysis of the thermal profile of work rolls in the hot strip rolling process

A 2-dimension axisymmetric model was developed by the finite-differencemethod, which can be used to predict the transient temperature field and thermal profile of workrolls in the hot strip rolling process. To demonstrate the accuracy and reliability of the solutiondeveloped, the calculation results were compared with the production data of a 1700 mm hot striprolling mill and good agreement was found between them. The effect of strip width and roll shiftingon the thermal expansion of the work rolls was studied. It is found that the strip width has markedeffect on the efficient thermal crown. Initially, when the rolling strip changes from narrow towide, a bigger efficient thermal crown can be quickly achieved; afterwards, when the rolling stripchanges from wide to narrow, not only the influence of uneven wear can be reduced but also theexcessive efficient thermal crown can be avoided. It is also found that the work roll shifting has adeterminate but not obvious effect on the reduction of the efficient thermal crown, and will makethe strip shape unstable without being used properly.

Application of artificial neural networks for predicting the impact of rolling dynamic compaction using dynamic cone penetrometer test results

Rolling dynamic compaction(RDC),which involves the towing of a noncircular module,is now widespread and accepted among many other soil compaction methods.However,to date,there is no accurate method for reliable prediction of the densification of soil and the extent of ground improvement by means of RDC.This study presents the application of artificial neural networks(ANNs) for a priori prediction of the effectiveness of RDC.The models are trained with in situ dynamic cone penetration(DCP) test data obtained from previous civil projects associated with the 4-sided impact roller.The predictions from the ANN models are in good agreement with the measured field data,as indicated by the model correlation coefficient of approximately 0.8.It is concluded that the ANN models developed in this study can be successfully employed to provide more accurate prediction of the performance of the RDC on a range of soil types.

Prediction of Rolling Load in Hot Strip Mill byInnovations Feedback Neural Networks

Because the structure of the classical mathematical model of rolling load is simple, even with the self-adapting technology, it is difficult to accommodate the increasing dimensional accuracy. Motivated by this fact, an Innovations Feedback Neural Networks （IFNN） was presented based on the idea of Kalman prediction. The neural networks used the Back Propagation （BP） algorithm and applied it to the prediction of rolling load in hot strip mill. The theoretical results and the off-line simulation show that the prediction capability of IFNN is better than that of normal BP networks, namely, for the prediction of the rolling load in hot strip mill, the prediction precision of IFNN is higher than that of normal BP networks. Finally, a relative complete rolling load prediction system was developed on Windows 2003/XP platform using the OOP programming method and the SQL server2000 database. With this sys- tem, the rolling load of a 1700 strip mill was calculated, and the prediction results obtained correspond well with the field data. It shows that IFNN is valid for rolling load prediction.

MENDED GENETIC BP NETWORK AND APPLICATION TO ROLLING FORCE PREDICTION OF 4-STAND TANDEM COLD STRIP MILL

In order to make good use of the ability to approach any function of BP (backpropagation) network and overcome its local astringency, and also make good use of the overallsearch ability of GA (genetic algorithms), a proposal to regulate the network's weights using bothGA and BP algorithms is suggested. An integrated network system of MGA (mended genetic algorithms)and BP algorithms has been established. The MGA-BP network's functions consist of optimizing GAperformance parameters, the network's structural parameters, performance parameters, and regulatingthe network's weights using both GA and BP algorithms. Rolling forces of 4-stand tandem cold stripmill are predicted by the MGA-BP network, and good results are obtained.

Gauge-meter model building based on the effect of elastic deformation of rolls in a plate mill

The calculation error of the gauge-meter model will affect the gap setting precision and the self-learn precision of rolling force. The precision of the gauge-meter model is strongly influenced by plate width, working roll radius, backup roll radius, working roll crown, backup roll crown, and rolling force. The influence rules are hard to get by measuring. Taking a conventional 4-h plate mill as the research subject, these influences were transferred into the calculation of roll deflection and flattening deformation. To calculate these deformations, the theory of the influence function method was adopted. By modifying the traditional gauge-meter model, a novel model of the effect of roll elastic deformation on the gap setting was built by data fitting. By this model, it was convenient to analyze the variation caused by the rolling condition. Combining the elastic deformation model of rolls with the kiss-rolls method, a gauge-meter model was put forward for plate thickness prediction. The prediction precision of thickness was greatly improved by the new gauge- meter model.

Synthesis and properties of SrFe_(12)O_(19) obtained by solid waste recycling of oily cold rolling mill sludge

The aim of this study was to develop a new approach for the preparation of environmentally friendly, high-value products from oily cold rolling mill(CRM) sludge. Utilizing oily CRM sludge as a source of iron, strontium hexaferrite(SrFe_(12)O_(19)) powders were prepared by multi-step processes involving acid leaching, chemical conversion treatment, and synthesis by a citrate precursor. The influences of citric acid dosage and the pH of the sol system on the formation, crystallite size, and magnetic properties of the obtained SrFe_(12)O_(19) powders were investigated. High saturation magnetization(74.8 mA·m^2·g^(–1)) and intrinsic coercivities(614.46 mT) were achieved for pH 7.0 of the sol system, for which the molar ratio of citric acid dosage to the total dosage of Fe^(3+) and Sr^(2+) was 1.5. This study presents a new approach to utilizing oily CRM sludge, and even refractory iron-containing solid waste.

Research on the Relationship between Molecular Activity of Additives and Lubricating Performance of Aluminum Rolling Oil

In this paper,an ab initio,local density functional(LDF)method was used to explore the relationship between the molecular properties of additives and the lubricating performance of aluminum rolling oil.The structural properties of butyl stearate,dodecanol,docosanol,and methyl dodecanoate were studied according to the density functional theory.The calculated data showed that the atoms in or around the functional groups might be likely the reacting sites.Because of the different functional groups and structure of ester and alcohol,two types of complex additives,dodecanol and butyl stearate,methyl dodecanoate and butyl stearate,respectively,were chosen for studying their tribological properties and performing aluminum cold rolling experiments.The test results agreed with the calculated results very well.The complex ester,viz.methyl dodecanoate and butyl stearate,had the best lubricating performance with a friction coefficient of 0.084 1 and a permissive-rolling thickness of 0.040 mm as compared with that of dodecanol-butyl stearate-base oil formulation.

Two-dimensional simulation on the rolling process of semi-solid 60Si2Mn by finite element method

The effect of various process variables on the law of metal flow for semi-solid rolling 60Si2Mn was studied by finite element method. Semi-solid 60Si2Mn can be described as compressible rigid visco-plastic porous material saturated with liquid. In terms of ther-mo-mechanical coupling condition, the distributions of stress, velocity and temperature were studied using software MARC. The simulation results show that the rigid visco-plastic model can accurately describe the semi-solid 60Si2Mn rolling process. The great deformation can achieve completely in view of low flow stress of semi-solid slurry.

Technological investigation on the Short Stroke Width Control Rolling in the Rougher Mills of Hot Strip Continuous Rolling Mill Train

According to technological requirement of hot charge rolling and hot direct rolling,in this paper,we investigated the technology of the width control rolling in the rougher mills of hot strip continuous rolling mill train.On the basis of improving width range of continuous casting of slab,we obtained a good result of greatly increasing the yield of slab→coil is achieved.

Complete Mill Simulation of the Rolling Process of 1660 mm Hot Strip Continuous Mills

The three-dimensional plastic deformations of strip are analyzed using the stream surface strip element method, the elastic deformations of rolls are analyzed using the influence coefficient method, the analyzing and computing model of shape and crown of 4-high mill was established by combining them, and the rolling process of 1660 mm hot strip continuous mills was simulated. The simulated results tally well with the experimental results. The modei and the method for simulation of shape analysis and control of hot strip mills were provided.