Safety Evaluation Method for Long-Term Operation of Metro Based on Combination Weighting Method

Metros are critical infrastructure in big cities and evaluation of their safe operation is of increasing im-portance.To make a reasonable safety evaluation for the metro during operation,this paper establishes a rational safety evaluation model based on long-term monitoring data of Shanghai Metro Line 2.Four evaluation indicators,ie.,absolute settlement,relative curvature,deformation rate and curvature radius,are adopted.Analytic hierar-chy process(AHP)and entropy method are combined to determine the weights of the indicators.The risk level values at different mileage are calculated and five danger levels are defined accordingly to determine the safety state of Shanghai Metro Line 2,ie.,safe,relatively safe,critical,relatively dangerous,and dangerous.Safety evaluation of Shanghai Metro Line 2 shows that:83.81%areas of Shanghai Metro Line 2 are in safe,relatively safe and critical states,while 15.63%and 0.57%areas are in relatively dangerous and dangerous states,respectively;the parts of Shanghai Metro Line 2 where the risk level values exceed the critical value are mainly distributed around the mileage at 6.0-7.5km and 8.5-11.0 km,and the risk level value peaks around the mileage at 7.3km,to which much attention should be attached and relevant protective measures be taken;the sections with the high risk level values coincide with the distinctly deforming arcas of the metro,indicating that this evaluation method is valid.

Engineering Geological Zoning of Soft-Soil Foundation Based on Combination Weighting and Extension Methods

Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological environments.The post-construction settlement of soft soil foundations are especially large and difficult to calculate.In addition,there are many deficiencies in the current methods used for engineering geological zoning.Focusing on the need of establishing engineering geological zoning for areas with soft soil foundations in the Tianjin Marine Economic Area,combination weighting and extension methods were introduced.An evaluation model for the settlement of soft soil foundations was established using multiple factors and large amounts of data.This evaluation model is accurate and objective for delineating engineering geological zoning.These methods eliminate deficiencies by considering both objective and subjective factors,and help obtain an objective and accurate result.

Comprehensive evaluation of the transformer oil-paper insulation state based on RF-combination weighting and an improved TOPSIS method

The accurate identification of the oil-paper insulation state of a transformer is crucial for most maintenance strategies.This paper presents a multi-feature comprehensive evaluation model based on combination weighting and an improved technique for order of preference by similarity to ideal solution(TOPSIS)method to perform an objective and scientific evaluation of the transformer oil-paper insulation state.Firstly,multiple aging features are extracted from the recovery voltage polarization spectrum and the extended Debye equivalent circuit owing to the limitations of using a single feature for evaluation.A standard evaluation index system is then established by using the collected time-domain dielectric spectrum data.Secondly,this study implements the per-unit value concept to integrate the dimension of the index matrix and calculates the objective weight by using the random forest algorithm.Furthermore,it combines the weighting model to overcome the drawbacks of the single weighting method by using the indicators and considering the subjective experience of experts and the random forest algorithm.Lastly,the enhanced TOPSIS approach is used to determine the insulation quality of an oil-paper transformer.A verification example demonstrates that the evaluation model developed in this study can efficiently and accurately diagnose the insulation status of transformers.Essentially,this study presents a novel approach for the assessment of transformer oil-paper insulation.

Spatial diversity and combination technology using amplitude and phase weighting method for phase-coherent underwater acoustic communications

The UWA channel is characterized as a time-dispersive rapidly fading channel, which in addition exhibits Doppler instabilities and limited bandwidth. To eliminate inter- symbol interference caused by multipath propagation, spatial diversity equalization is the main technical means. The paper combines the passive phase conjugation and spatial processing to maximize the output array gain. It uses signal-to-noise-plus-interference to evaluate the quality of signals received at different channels. The amplitude of signal is weighted using Sigmoid function. Second order PLL can trace the phase variation caused by channel, so the signal can be accumulated in the same phase. The signals received at different channels need to be normal- ized. It adopts fractional-decision feedback diversity equalizer （FDFDE） and achieves diversity equalization by using different channel weighted coefficients. The simulation and lake trial data processing results show that, the optimized diversity receiving equalization algorithm can im- prove communication system＇s ability in tracking the change of underwater acoustic channel, offset the impact of multipath and noise and improve the performance of communication system. The performance of the communication receiving system is better than that of the equal gain combination. At the same time, the bit error rate （BER） reduces 1.8%.

Winter wheat yield estimation based on assimilated Sentinel-2 images with the CERES-Wheat model

Assimilating Sentinel-2 images with the CERES-Wheat model can improve the precision of winter wheat yield estimates at a regional scale. To verify this method, we applied the ensemble Kalman filter(EnKF) to assimilate the leaf area index(LAI) derived from Sentinel-2 data and simulated by the CERES-Wheat model. From this, we obtained the assimilated daily LAI during the growth stage of winter wheat across three counties located in the southeast of the Loess Plateau in China: Xiangfen, Xinjiang, and Wenxi. We assigned LAI weights at different growth stages by comparing the improved analytic hierarchy method, the entropy method, and the normalized combination weighting method, and constructed a yield estimation model with the measurements to accurately estimate the yield of winter wheat. We found that the changes of assimilated LAI during the growth stage of winter wheat strongly agreed with the simulated LAI. With the correction of the derived LAI from the Sentinel-2 images, the LAI from the green-up stage to the heading–filling stage was enhanced, while the LAI decrease from the milking stage was slowed down, which was more in line with the actual changes of LAI for winter wheat. We also compared the simulated and derived LAI and found the assimilated LAI had reduced the root mean square error(RMSE) by 0.43 and 0.29 m^(2) m^(–2), respectively, based on the measured LAI. The assimilation improved the estimation accuracy of the LAI time series. The highest determination coefficient(R2) was 0.8627 and the lowest RMSE was 472.92 kg ha^(–1) in the regression of the yields estimated by the normalized weighted assimilated LAI method and measurements. The relative error of the estimated yield of winter wheat in the study counties was less than 1%, suggesting that Sentinel-2 data with high spatial-temporal resolution can be assimilated with the CERES-Wheat model to obtain more accurate regional yield estimates.

Decision-making Method of Sharing Mode for Multi-microgrid System Considering Risk and Coordination Cost

Power sharing can improve the benefit of the multi-microgrid(MMG)system.However,the information disclosure may appear during the sharing process,which would bring privacy risk to a local microgrid.Actually,the risk and coordination cost are different in different sharing modes.Therefore,this paper develops a decision-making method to decide the most suitable one of three mostly used sharing modes(i.e.,cooperative game with complete information,cooperative game with incomplete information,and noncooperative game).Firstly,power sharing paradigms and coordination mechanisms in the three modes are formulated in detail.Particularly,different economic operation models of MMG system are included to analyze the economic benefit from different sharing modes.Based on the different disclosed information,the risk cost is evaluated by using the simplified fuzzy analytic hierarchy process(FAHP).And the coordination cost for different sharing modes is expressed in different functions.In addition,a hierarchical evaluation system including three decision-making factors(e.g.,economics,risk,and coordination)is set up.Meanwhile,a combination weighting method(e.g.,the simplified FAHP combined with the anti-entropy weight method)is applied to obtain the weight of each factor for comprehensive evaluation.Finally,the optimal sharing solution of MMG system is decided by comparing and analyzing the difference among the three sharing modes.Numerical results validate that the proposed method can provide a reference to deciding a suitable sharing mode.