Analysis of the sealing performance of combined sealing structure under deep-sea high pressure environment

For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft movement speed on the sealing performance of the combined sealing structure were studied.The change rule of the sealing performance of the combined sealing structure of reciprocating motion under different working conditions is proved.The study shows that in the combined sealing structure of reciprocating movement,the Von Mises stress and the contact stress of the O-ring varies with the direction of the shaft movement.The Von Mises stress and contact stress of the O-ring,the Von Mises stress and the contact stress on each sealing lip of the slip ring gradually increase with the increasing of seawater depths.At the same time,the Von Mises stress of the O-ring which in the process of the shaft upward movement is greater than the shaft downward movement,making the shaft upward movement more likely to cause the O-ring relaxation and fatigue.The shaft movement speed has no significant influence on the Von Mises stress and contact stress of the O-ring.The research results provide theoretical guidance and technical support for the selection and optimization of the geometrical parameters of the combined sealing structure in the deep-sea high-pressure environment.

Development of an ultra-high-pressure rotary combined dynamic seal and experimental study on its sealing performance in deep energy mining conditions

With the continuous development of deep oil and gas,minerals,geothermal resources,and other resources,there are increasingly more stringent requirements for equipment.In particular,the ultra-highpressure dynamic seals of deep mining device need to be developed.Therefore,considering the use of dynamic seals in unique deep mining environments,an ultra-high-pressure rotating combined dynamic seal was designed and developed and its sealing performance was experimentally measured and analyzed.The results show that the experimental device can operate stably under a pressure of up to150 MPa and a rotating speed of 76 r/min,and can also operate normally under a rotating speed of up to 140 r/min and a sealing pressure of 120 MPa.During the operation of the ultra-high-pressure rotating combined dynamic seal,the sealing ring does not show obvious damage,which vouches for its sealing performance.No leakage of flow and pressure was detected in the all seal structures within the sealing pressure range of 0-150 MPa.Therefore,the dynamic sealing performance of the device is intact under ultra-high-pressure conditions and can be applied in deep mining environments at a certain depth.The research and development of this device can aid future deep energy exploration and exploitation.