期刊文献+
共找到25,360篇文章
< 1 2 250 >
每页显示 20 50 100
An Energy Trading Method Based on Alliance Blockchain and Multi-Signature
1
作者 Hongliang Tian Jiaming Wang 《Computers, Materials & Continua》 SCIE EI 2024年第2期1611-1629,共19页
Blockchain,known for its secure encrypted ledger,has garnered attention in financial and data transfer realms,including the field of energy trading.However,the decentralized nature and identity anonymity of user nodes... Blockchain,known for its secure encrypted ledger,has garnered attention in financial and data transfer realms,including the field of energy trading.However,the decentralized nature and identity anonymity of user nodes raise uncertainties in energy transactions.The broadcast consensus authentication slows transaction speeds,and frequent single-point transactions in multi-node settings pose key exposure risks without protective measures during user signing.To address these,an alliance blockchain scheme is proposed,reducing the resource-intensive identity verification among nodes.It integrates multi-signature functionality to fortify user resources and transac-tion security.A novel multi-signature process within this framework involves neutral nodes established through central nodes.These neutral nodes participate in multi-signature’s signing and verification,ensuring user identity and transaction content privacy.Reducing interactions among user nodes enhances transaction efficiency by minimizing communication overhead during verification and consensus stages.Rigorous assessments on reliability and operational speed highlight superior security performance,resilient against conventional attack vectors.Simulation shows that compared to traditional solutions,this scheme has advantages in terms of running speed.In conclusion,the alliance blockchain framework introduces a novel approach to tackle blockchain’s limitations in energy transactions.The integrated multi-signature process,involving neutral nodes,significantly enhances security and privacy.The scheme’s efficiency,validated through analytical assessments and simulations,indicates robustness against security threats and improved transactional speeds.This research underscores the potential for improved security and efficiency in blockchain-enabled energy trading systems. 展开更多
关键词 Alliance blockchain multi-signature energy trading security performance transaction efficiency
下载PDF
VITEK■ 2 Compact全自动微生物鉴定药敏分析仪虚拟仿真教学软件的开发与应用
2
作者 黄荔丰 《工业微生物》 CAS 2024年第3期31-34,共4页
文章主要介绍了VITEK■2 Compact全自动微生物鉴定药敏分析仪虚拟仿真教学软件的设计与开发,以及虚拟仿真融合线上线下混合教学模式在医学微生物检验实验教学中的应用。结果表明,该仿真教学软件的实际应用既有利于培养学生的实践操作能... 文章主要介绍了VITEK■2 Compact全自动微生物鉴定药敏分析仪虚拟仿真教学软件的设计与开发,以及虚拟仿真融合线上线下混合教学模式在医学微生物检验实验教学中的应用。结果表明,该仿真教学软件的实际应用既有利于培养学生的实践操作能力及思维方式,又能弥补学校实训环境与临床实际不符的缺陷,为微生物检验实验教学质量的提升开辟新的思路。 展开更多
关键词 VITEK■2 compact 虚拟仿真 微生物学检验 实验教学
下载PDF
Quantum homomorphic broadcast multi-signature based on homomorphic aggregation 被引量:1
3
作者 徐鑫 殷爱菡 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第7期254-261,共8页
Quantum multi-signature has attracted extensive attention since it was put forward.Beside its own improvement,related research is often combined with other quantum signature.However,this type of quantum signature has ... Quantum multi-signature has attracted extensive attention since it was put forward.Beside its own improvement,related research is often combined with other quantum signature.However,this type of quantum signature has one thing in common,that is,the generation and verification of signature depend heavily on the shared classical secret key.In order to increase the reliability of signature,the homomorphic aggregation technique is applied to quantum multi-signature,and then we propose a quantum homomorphic multi-signature protocol.Unlike previous quantum multi-signature protocols,this protocol utilizes homomorphic properties to complete signature generation and verification.In the signature generation phase,entanglement swapping is introduced,so that the individual signatures of multiple users are aggregated into a new multi-signature.The original quantum state is signed by the shared secret key to realize the verification of the signature in the verification phase.The signature process satisfies the homomorphic property,which can improve the reliability of the signature. 展开更多
关键词 quantum signature homomorphic aggregation homomorphic multi-signature Bell state
下载PDF
Driver at 10 MJ and 1 shot/30 min for inertial confinement fusion at high gain:Efficient,compact,low-cost,low laser-plasma instabilities,beam color selectable from 2ω/3ω/4ω,applicable to multiple laser fusion schemes 被引量:1
4
作者 隋展 蓝可 《Matter and Radiation at Extremes》 SCIE EI CSCD 2024年第4期4-7,共4页
The achievement of ignition at the National Ignition Facility(NIF)has prompted a global wave of further research on inertial fusion energy(IFE).However,IFE requires a target gain G of 30-100,and it is hard to achieve ... The achievement of ignition at the National Ignition Facility(NIF)has prompted a global wave of further research on inertial fusion energy(IFE).However,IFE requires a target gain G of 30-100,and it is hard to achieve fusion at such high gain with the energy,configuration,and technical approach of the NIF.Here,we present a conceptual design for a next-generation laser driver that is applicable to multiple laser fusion schemes and provides 10 MJ,2-3 PW at 3ω(or 2ω,in which case the energy and power can be higher),and one shot per 30 min,with the aim of achieving G>30.It is also efficient,compact,and low in cost,and it has low susceptibility to laser-plasma instabilities. 展开更多
关键词 applicable compact INSTABILITIES
下载PDF
Computer vision-aided DEM study on the compaction characteristics of graded subgrade filler considering realistic coarse particle shapes 被引量:1
5
作者 Taifeng Li Kang Xie +2 位作者 Xiaobin Chen Zhixing Deng Qian Su 《Railway Engineering Science》 EI 2024年第2期194-210,共17页
The compaction quality of subgrade filler strongly affects subgrade settlement.The main objective of this research is to analyze the macro-and micro-mechanical compaction characteristics of subgrade filler based on th... The compaction quality of subgrade filler strongly affects subgrade settlement.The main objective of this research is to analyze the macro-and micro-mechanical compaction characteristics of subgrade filler based on the real shape of coarse particles.First,an improved Viola-Jones algorithm is employed to establish a digitalized 2D particle database for coarse particle shape evaluation and discrete modeling purposes of subgrade filler.Shape indexes of 2D subgrade filler are then computed and statistically analyzed.Finally,numerical simulations are performed to quantitatively investigate the effects of the aspect ratio(AR)and interparticle friction coefficient(μ)on the macro-and micro-mechanical compaction characteristics of subgrade filler based on the discrete element method(DEM).The results show that with the increasing AR,the coarse particles are narrower,leading to the increasing movement of fine particles during compaction,which indicates that it is difficult for slender coarse particles to inhibit the migration of fine particles.Moreover,the average displacement of particles is strongly influenced by the AR,indicating that their occlusion under power relies on particle shapes.The dis-placement and velocity of fine particles are much greater than those of the coarse particles,which shows that compaction is primarily a migration of fine particles.Under the cyclic load,the interparticle friction coefficientμhas little effect on the internal structure of the sample;under the quasi-static loads,however,the increase inμwill lead to a significant increase in the porosity of the sample.This study could not only provide a novel approach to investigate the compaction mechanism but also establish a new theoretical basis for the evaluation of intelligent subgrade compaction. 展开更多
关键词 Subgrade filler particles Deep learning particle Shape analysis Particle library compaction characteristics Discrete element method(DEM)
下载PDF
Conceptual design of a 714-MHz RFQ for compact proton injectors and development of a new tuning algorithm on its aluminium prototype
6
作者 Yi-Xing Lu Wen-Cheng Fang +1 位作者 Yu-Sen Guo Zhen-Tang Zhao 《Nuclear Science and Techniques》 SCIE EI CAS CSCD 2024年第1期45-58,共14页
Radio frequency quadrupoles(RFQs),which are crucial components of proton injectors,significantly affect the performance of proton accelerator facilities.An RFQ with a high frequency of 714 MHz dedicated to compact pro... Radio frequency quadrupoles(RFQs),which are crucial components of proton injectors,significantly affect the performance of proton accelerator facilities.An RFQ with a high frequency of 714 MHz dedicated to compact proton injectors for medi-cal applications is designed in this study.The RFQ is designed to accelerate proton beams from 50 keV to 4 MeV within a short length of 2 m and can be matched closely with the downstream drift tube linac to capture more particles through a preliminary optimization.To develop an advanced RFQ,challenging techniques,including fabrication and tuning method,must be evaluated and verified using a prototype.An aluminium prototype is derived from the conceptual design of the RFQ and then redesigned to confirm the radio frequency performance,fabrication procedure,and feasibility of the tuning algorithm.Eventually,a new tuning algorithm based on the response matrix and least-squares method is developed,which yields favorable results based on the prototype,i.e.,the errors of the dipole and quadrupole components reduced to a low level after several tuning iterations.Benefiting from the conceptual design and techniques obtained from the prototype,the formal mechanical design of the 2-m RFQ is ready for the next manufacturing step. 展开更多
关键词 compact proton injector RFQ IH-DTL High gradient Tuning
下载PDF
THE SCHUR TEST OF COMPACT OPERATORS
7
作者 Qijian KANG Maofa WANG 《Acta Mathematica Scientia》 SCIE CSCD 2024年第5期2041-2050,共10页
Infinite matrix theory is an important branch of function analysis.Every linear operator on a complex separable infinite dimensional Hilbert space corresponds to an infinite matrix with respect a orthonormal base of t... Infinite matrix theory is an important branch of function analysis.Every linear operator on a complex separable infinite dimensional Hilbert space corresponds to an infinite matrix with respect a orthonormal base of the space,but not every infinite matrix corresponds to an operator.The classical Schur test provides an elegant and useful criterion for the boundedness of linear operators,which is considered a respectable mathematical accomplishment.In this paper,we prove the compact version of the Schur test.Moreover,we provide the Schur test for the Schatten class S_(2).It is worth noting that our main results can be applicable to the general matrix without limitation on non-negative numbers.We finally provide the Schur test for compact operators from l_(p) into l_(q). 展开更多
关键词 Schur test compact operator infinite matrix
下载PDF
Evaluation of red soil-bentonite mixtures for compacted clay liners
8
作者 A.S.Devapriya T.Thyagaraj 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第2期697-710,共14页
Compacted clay liners are an integral part of the waste landfills,which are provided to contain the leachate within the landfills and protect the surrounding environment.Generally,locally available natural soils are u... Compacted clay liners are an integral part of the waste landfills,which are provided to contain the leachate within the landfills and protect the surrounding environment.Generally,locally available natural soils are used for the construction of compacted clay liners if they satisfy the design criteria.However,not all soils in their natural state satisfy all the design criteria for the liner materials.Thus,there is a definite need to modify the locally available natural soils by blending with bentonite to meet the required design criteria for the liners.In view of this,the present study evaluates the suitability of an Indian red soil enhanced with bentonite as a liner material.To achieve this,a series of experiments were carried out using locally available red soil and bentonite.First,the suitability of the red soil was evaluated as a liner material.The experimental results showed that the red soil met all the selection criteria stipulated by the Environmental Protection Agencies(EPAs)for the liners except the hydraulic conductivity criterion.Therefore,the red soil was mixed with bentonite contents of 10%,20%and 30%,and the red soil-bentonite mixtures were evaluated for their suitability for liners in their compacted state.Further,as the liners in the arid and semi-arid regions are subjected to moisture variations due to seasonal moisture fluctuations and other factors,the red soil-bentonite mixtures were subjected to wetdry cycles,and their suitability was evaluated after wet-dry cycles.The experimental results revealed that all the red soil-bentonite mixtures met the stipulated EPA criteria for the liners in the as-compacted state.However,the red soil-bentonite mixtures with 20%and 30%bentonite contents only satisfied the hydraulic conductivity requirement even after wet-dry cycles.The experimental findings were supplemented with the microstructural insights captured through digital camera images,scanning electron microscopy(SEM),and mercury intrusion porosimetry(MIP)studies. 展开更多
关键词 compacted clay lines Hydraulic conductivity Wet-dry cycles Microstructure
下载PDF
Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties
9
作者 Gui-quan Wang Zhuo Xu +2 位作者 Zhong-li Liu Xiang Chen Yan-xiang Li 《China Foundry》 SCIE EI CAS CSCD 2024年第3期248-256,共9页
The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigat... The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake discs.In this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical properties.Compacted graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of ferrite.The peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction tests.The morphology of thermal cracks and 3D profiles of the worn surfaces were also discussed.It is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue resistance.Oxidization of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal cracks.Despite the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear. 展开更多
关键词 compacted graphite iron brake disc thermomechanical properties thermal fatigue WEAR
下载PDF
Multiscale engineered artificial compact bone via bidirectional freeze-driven lamellated organization of mineralized collagen microfibrils
10
作者 Lingwenyao Kong Yonggang Zhao +6 位作者 Yang Xiong Junlin Chen Shuo Wang Ziming Yan Huibin Shi Zhanli Liu Xiumei Wang 《Bioactive Materials》 SCIE CSCD 2024年第10期168-181,共14页
Bone,renowned for its elegant hierarchical structure and unique mechanical properties,serves as a constant source of inspiration for the development of synthetic materials.However,achieving accurate replication of bon... Bone,renowned for its elegant hierarchical structure and unique mechanical properties,serves as a constant source of inspiration for the development of synthetic materials.However,achieving accurate replication of bone features in artificial materials with remarkable structural and mechanical similarity remains a significant challenge.In this study,we employed a cascade of continuous fabrication processes,including biomimetic mineralization of collagen,bidirectional freeze-casting,and pressure-driven fusion,to successfully fabricate a macroscopic bulk material known as artificial compact bone(ACB).The ACB material closely replicates the composition,hierarchical structures,and mechanical properties of natural bone.It demonstrates a lamellated alignment of mineralized collagen(MC)microfibrils,similar to those found in natural bone.Moreover,the ACB exhibits a similar high mineral content(70.9%)and density(2.2 g/cm3)as natural cortical bone,leading to exceptional mechanical properties such as high stiffness,hardness,and flexural strength that are comparable to those of natural bone.Importantly,the ACB also demonstrates excellent mechanical properties in wet,outstanding biocompatibility,and osteogenic properties in vivo,rendering it suitable for a broad spectrum of biomedical applications,including orthopedic,stomatological,and craniofacial surgeries. 展开更多
关键词 Artificial compact bone Bidirectional freeze-casting Mineralized collagen microfibril Hierarchical structures
原文传递
Gravel hardness effect on compaction characteristics of gravelly soil
11
作者 SHI Yunfang LI Shengang +1 位作者 JIANG Chen LIU Jinning 《Journal of Mountain Science》 SCIE CSCD 2024年第4期1432-1443,共12页
The compaction characteristics of gravelly soil are affected by gravel hardness.To investigate the evolution and influencing mechanism of different gravel hardness on the compaction characteristics of gravelly soil,he... The compaction characteristics of gravelly soil are affected by gravel hardness.To investigate the evolution and influencing mechanism of different gravel hardness on the compaction characteristics of gravelly soil,heavy compaction tests and crushing tests were conducted on gravelly soils with gravels originated from hard,soft and extremely soft rocks.According to orthogonal experiments and variance analysis,it was found that hardness has a significant impact on the maximum dry density of gravelly soil,followed by gravel content,and lastly,moisture content.For gravel compositions with an average saturated uniaxial compressive strength less than 60 MPa,the order of compacted maximum dry density is soft gravels>hard gravels>extremely soft gravels.Each type of gravelly soil has a threshold for gravel content,with 60%for hard and soft gravels and 50%for extremely soft gravels.Beyond these thresholds,the compacted dry density decreases significantly.There is a certain interaction between hardness,gravel content,and moisture content.Higher hardness increases the influence of gravel content,whereas lower hardness increases the influence of moisture content.Gravelly soils with the coarse aggregate(CA)between 0.7 and 0.8 typically achieve higher dry densities after compaction.In addition,the prediction equations for the particle breakage rate and CA ratio in the Bailey method were proposed to estimate the compaction performance of gravelly soil preliminarily.The results further revealed the compaction mechanism of different gravelly soils and can provide reference for subgrade filling construction. 展开更多
关键词 Gravelly soil HARDNESS compaction characteristics Crushing characteristics Particle breakage rate Bailey method
下载PDF
Feasibility of compacted attapulgite/diatomite amended clayey soils as gas barrier materials
12
作者 Heng Zhuang Wei-Yi Xia +5 位作者 Jia-Ming Wen Min Wang Ying-Zhen Li Ning-Jun Jiang Konstantin S.Rodygin Yan-Jun Du 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第9期3707-3717,共11页
Compacted clay liners are extensively used as barriers to control the upward diffusion of vapors of volatile or semi-volatile organic contaminants released from unsaturated contaminated soils at industrycontaminated s... Compacted clay liners are extensively used as barriers to control the upward diffusion of vapors of volatile or semi-volatile organic contaminants released from unsaturated contaminated soils at industrycontaminated sites.This study aimed to investigate the gas diffusion barrier performance of compacted clayey soils amended with three agents including attapulgite and diatomite individually,and attapulgite/diatomite mixture.The properties including water retention,volumetric shrinkage,gas diffusion,and unconfined compressive strength were evaluated through a series of laboratory tests of amended compacted clayey soils.The results demonstrate that the decrease in volume proportions of interaggregate pores leads to an increase in unconfined compressive strength(qu).Both hydrophilic groups and microstructures of attapulgite and diatomite result in an increase in water retention percent(Wt)of compacted clayey soil specimens after amendment regardless of the type of agent or initial water content(w0).Furthermore,the ratio of the gas diffusion coefficient(De)to the gas diffusion coefficient in the air(Da)was significantly reduced owing to a decrease in volume proportions of inter-aggregate pores,hydrophilic group,and microstructures of attapulgite and diatomite.Scanning electron microscope analyses revealed that rod-shaped attapulgite filled the inter-aggregate pores formed by clay particles,whereas the disc-shaped diatomite particles,characterized by micropores,failed to obstruct the interaggregate pores due to their larger particle size.Mercury intrusion porosimetry(MIP)analyses showed a reduction in pore volume in the inter-aggregate pores,leading to a reduction in the total pore volume for both the attapulgite and attapulgite/diatomite mixture amended clays,which is in accordance with the scanning electron microscope(SEM)results.The findings are pertinent to the practical application of compacted clay liners as gas barriers against the upward migration of volatile or semi-volatile organic contaminants at contaminated sites. 展开更多
关键词 compacted clay liner Attapulgite/diatomite mixture Diffusion barrier Water retention
下载PDF
Clogging caused by coupled grain migration and compaction effect during groundwater recharge for unconsolidated sandstone reservoir in groundwater-source heat pump
13
作者 Fujian Yang Jing Luo +3 位作者 Guiling Wang Hejuan Liu Dawei Hu Hui Zhou 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第8期2947-2959,共13页
In unconsolidated sandstone reservoirs,presence of numerous movable grains and a complex grain size composition necessitates a clear understanding of the physical clogging process for effective groundwater recharge in... In unconsolidated sandstone reservoirs,presence of numerous movable grains and a complex grain size composition necessitates a clear understanding of the physical clogging process for effective groundwater recharge in groundwater-source heat pump systems.To investigate this,a series of seepage experiments was conducted under in situ stress conditions using unconsolidated sandstone samples with varying grain compositions.The clogging phenomenon arises from the combined effects of grain migration and compaction,wherein the migration of both original and secondary crushed fine-grain particles blocks the seepage channels.Notably,grain composition influences the migration and transport properties of the grains.For samples composed of smaller grains,the apparent permeability demonstrates a transition from stability to decrease.In contrast,samples with larger grains experience a skip at the stability stage and directly enter the decrease stage,with a minor exception of a slight increase observed.Furthermore,a unique failure mode characterized by diameter shrinkage in the upper part of the sample is observed due to the combined effects of grain migration and in situ stress-induced compaction.These testing results contribute to a better understanding of the clogging mechanism caused by the coupled effects of grain migration and compaction during groundwater recharge in unconsolidated sandstone reservoirs used in groundwater-source heat pump systems. 展开更多
关键词 Groundwater-source heat pump CLOGGING Grain migration compaction effect Groundwater recharge Unconsolidated sandstone
下载PDF
Research on Preparation and Electrochemical Performance of the High Compacted Density Ni-Co-Mn Ternary Cathode Materials
14
作者 Fupeng Zhi Juanhui Wang +1 位作者 Xiaomin Zhang Jun Zhang 《Advances in Materials Physics and Chemistry》 CAS 2024年第3期47-53,共7页
The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was syn... The high compacted density LiNi<sub>0.5-x</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub>Mg<sub>x</sub>O<sub>2</sub> cathode material for lithium-ion batteries was synthesized by high temperature solid-state method, taking the Mg element as a doping element and the spherical Ni<sub>0.5</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> (OH)<sub>2</sub>, Li<sub>2</sub>CO<sub>3</sub> as raw materials. The effects of calcination temperature on the structure and properties of the products were investigated. The structure and morphology of cathode materials powder were analyzed by X-ray diffraction spectroscopy (XRD) and scanning electronmicroscopy (SEM). The electrochemical properties of the cathode materials were studied by charge-discharge test and cyclic properties test. The results show that LiNi<sub>0.4985</sub>Co<sub>0.2</sub>Mn<sub>0.3</sub> Mg<sub>0.0015</sub>O<sub>2</sub> cathode material prepared at calcination temperature 930°C has a good layered structure, and the compacted density of the electrode sheet is above 3.68 g/cm<sup>3</sup>. The discharge capacity retention rate is more than 97.5% after 100 cycles at a charge-discharge rate of 1C, displaying a good cyclic performance. 展开更多
关键词 High compacted Density Ternary Cathode Materials Electrochemical Performance
下载PDF
Bias-Free Solar-to-Hydrogen Conversion in a BiVO_(4)/PM6:Y6 Compact Tandem with Optically Balanced Light Absorption
15
作者 Catarina G.Ferreira Constanza Sansierra +3 位作者 Francisco Bernal-Texca Mingyu Zhang Carles Ros Jordi Martorell 《Energy & Environmental Materials》 SCIE EI CAS CSCD 2024年第4期231-238,共8页
The high voltage required to overcome the thermodynamic threshold and the complicated kinetics of the water splitting reaction limit the efficiency of single semiconductor-based photoelectrochemistry.A semiconductor/s... The high voltage required to overcome the thermodynamic threshold and the complicated kinetics of the water splitting reaction limit the efficiency of single semiconductor-based photoelectrochemistry.A semiconductor/solar cell tandem structure has been theoretically demonstrated as a viable path to achieve an efficient direct transformation of sunlight into chemical energy.However,compact designs exhibiting the indispensable optimally balanced light absorption have not been demonstrated.In the current work,we design and implement a compact tandem providing the complementary absorption of a highly transparent BiVO_(4)photoanode and a PM6:Y6 solar cell.Such bandgap combination approaches the optimal to reach the solar-to-hydrogen(STH)conversion upper limit for tandem photoelectrochemical cells(PECs).We demonstrate that,by using a photonic multilayer structure to adequately balance sunlight absorption among both tandem materials,a 25%increase in the bias-free STH conversion can be achieved,setting a clear path to take compact tandem PECs to the theoretical limit performance. 展开更多
关键词 bismuth vanadate compact tandem organic solar cells photonic multilayers solar-to-hydrogen conversion
下载PDF
Effect of FeSi additive in dual-chamber sample cup on thermal analysis characteristic values and vermiculating rate of compacted graphite iron
16
作者 De-quan Shi Ze-yu Liu +1 位作者 Gui-li Gao Yi-cheng Feng 《China Foundry》 SCIE EI CAS CSCD 2024年第1期91-100,共10页
Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements af... Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements affecting the solidification of molten iron.In this study,FeSi75 was added in one chamber of the dual-chamber sample cup,and the influences of FeSi75 additive on the characteristic values of thermal analysis curves and vermiculating rate were investigated.The results show that with the increase of FeSi75,the start temperature of austenite formation TALfirstly decreases and then increases,but the start temperature of eutectic growth TSEF,the lowest eutectic temperature TEU,temperature at maximum eutectic reaction rate TEM,and highest eutectic temperature TERkeep always an increase.The temperature at final solidification point TEShas little change.The FeSi75 additive has different influences on the vermiculating rate of molten iron with different vermiculation,and the vermiculating rate increases for lower vermiculation molten iron while decreases for higher one.According to the thermal analysis curves obtained by a dual-chamber sample cup with 0.30wt.%FeSi75 additive in one chamber,the vermiculating rate of molten iron can be evaluated by comparing the characteristic values of these curves.The time differenceΔtERcorresponding to the highest eutectic temperature TERhas a closer relationship with the vermiculating rate,and a parabolic regression curve between the time differenceΔtERand vermiculating rateηhas been obtained within the range of 65%to 95%,which is suitable for the qualified melt. 展开更多
关键词 FeSi75 additive characteristic value vermiculating rate thermal analysis compacted graphite iron
下载PDF
Effects of vacuum magnetic field region on the compact torus trajectory in a tokamak plasma
17
作者 董期龙 张洁 +28 位作者 兰涛 肖持进 庄革 陈晨 周永康 吴捷 龙婷 聂林 卢鹏程 王天雄 邬佳仁 邓鹏 汪兴康 柏泽琪 黄玉华 李杰 薛雷 阿迪力江 毛文哲 周楚 刘阿娣 吴征威 谢锦林 丁卫星 刘万东 陈伟 钟武律 许敏 段旭如 《Plasma Science and Technology》 SCIE EI CAS CSCD 2024年第7期23-39,共17页
The trajectory of the compact torus(CT)within a tokamak discharge is crucial to fueling.In this study,we developed a penetration model with a vacuum magnetic field region to accurately determine CT trajectories in tok... The trajectory of the compact torus(CT)within a tokamak discharge is crucial to fueling.In this study,we developed a penetration model with a vacuum magnetic field region to accurately determine CT trajectories in tokamak discharges.This model was used to calculate the trajectory and penetration parameters of CT injections by applying both perpendicular and tangential injection schemes in both HL-2A and ITER tokamaks.For perpendicular injection along the tokamak's major radius direction from the outboard,CTs with the same injection parameters exhibited a 0.08 reduction in relative penetration depth when injected into HL-2A and a 0.13reduction when injected into ITER geometry when considering the vacuum magnetic field region compared with cases where this region was not considered.In addition,we proposed an optimization method for determining the CT's initial injection velocity to accurately calculate the initial injection velocity of CTs for central fueling in tokamaks.Furthermore,this paper discusses schemes for the tangential injection of CT into tokamak discharges.The optimal injection angle and CT magnetic moment direction for injection into both HL-2A and ITER were determined through numerical simulations.Finally,the kinetic energy loss occurring when the CT penetrated the vacuum magnetic field region in ITER was reduced byΔEk=975.08 J by optimizing the injection angle for the CT injected into ITER.These results provide valuable insights for optimizing injection angles in fusion experiments.Our model closely represents actual experimental scenarios and can assist the design of CT parameters. 展开更多
关键词 compact torus central fueling vacuum magnetic field region penetration mechanism optimization parameters
下载PDF
Micro-destructive assessment of subgrade compaction quality using ultrasonic pulse velocity
18
作者 Xuefei Wang Xuping Dong +3 位作者 Xiangdong Li Jianmin Zhang Guowei Ma Jiale Li 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第11期4782-4797,共16页
The ultrasonic pulse velocity(UPV)correlates significantly with the density and pore size of subgrade filling materials.This research conducts numerous Proctor and UPV tests to examine how moisture and rock content af... The ultrasonic pulse velocity(UPV)correlates significantly with the density and pore size of subgrade filling materials.This research conducts numerous Proctor and UPV tests to examine how moisture and rock content affect compaction quality.The study measures the changes in UPV across dry density and compaction characteristics.The compacted specimens exhibit distinct microstructures and mechanical properties along the dry and wet sides of the compaction curve,primarily influenced by internal water molecules.The maximum dry density exhibits a positive correlation with the rock content,while the optimal moisture content demonstrates an inverse relationship.As the rock content increases,the relative error of UPV measurement rises.The UPV follows a hump-shaped pattern with the initial moisture content.Three intelligent models are established to forecast dry density.The measure of UPV and PSO-BP-NN model quickly assesses compaction quality. 展开更多
关键词 SUBGRADE compaction quality Ultrasonic pulse velocity(UPV) Intelligent model Proctor test Micro-destructive evaluation
下载PDF
Stability Analysis of Inverse Lax-Wendroff Procedure for a High order Compact Finite Difference Schemes
19
作者 Tingting Li Jianfang Lu Pengde Wang 《Communications on Applied Mathematics and Computation》 EI 2024年第1期142-189,共48页
This paper considers the finite difference(FD)approximations of diffusion operators and the boundary treatments for different boundary conditions.The proposed schemes have the compact form and could achieve arbitrary ... This paper considers the finite difference(FD)approximations of diffusion operators and the boundary treatments for different boundary conditions.The proposed schemes have the compact form and could achieve arbitrary even order of accuracy.The main idea is to make use of the lower order compact schemes recursively,so as to obtain the high order compact schemes formally.Moreover,the schemes can be implemented efficiently by solving a series of tridiagonal systems recursively or the fast Fourier transform(FFT).With mathematical induction,the eigenvalues of the proposed differencing operators are shown to be bounded away from zero,which indicates the positive definiteness of the operators.To obtain numerical boundary conditions for the high order schemes,the simplified inverse Lax-Wendroff(SILW)procedure is adopted and the stability analysis is performed by the Godunov-Ryabenkii method and the eigenvalue spectrum visualization method.Various numerical experiments are provided to demonstrate the effectiveness and robustness of our algorithms. 展开更多
关键词 compact scheme Diffusion operators Inverse Lax-Wendroff(ILW) Fourier analysis Eigenvalue analysis
下载PDF
基于VITEK MS及VITEK2 Compact的更年宁微生物污染调查
20
作者 郭琦 《中成药》 CAS CSCD 北大核心 2024年第10期3523-3528,共6页
目的研究更年宁微生物负载状况。方法建立微生物限度检查方法并对全部样品进行微生物限度检查,分离培养检查中出现的污染菌,使用VITEK MS飞行时间质谱及VITEK2 Compact全自动微生物分析系统对分离菌株进行鉴定。结果样品需氧菌总数存在... 目的研究更年宁微生物负载状况。方法建立微生物限度检查方法并对全部样品进行微生物限度检查,分离培养检查中出现的污染菌,使用VITEK MS飞行时间质谱及VITEK2 Compact全自动微生物分析系统对分离菌株进行鉴定。结果样品需氧菌总数存在不同程度的微生物污染问题,霉菌、酵母菌总数及控制菌各项指标良好。需氧菌污染菌株以芽孢杆菌属为主,其他种类需氧菌较少被检出,2种方法对菌种的鉴定结果存在差异。结论更年宁需氧菌总数微生物污染问题不容忽视,但未发现有严重致病性微生物。VITEK MS及VITEK2 Compact联用时结果展现更丰富、直观、高效,可为调查污染来源提供重要参考。 展开更多
关键词 更年宁 微生物污染 VITEK MS VITEK2 compact 菌种鉴定 芽孢杆菌
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部