Estimation of the anisotropy of hydraulic conductivity through 3D fracture networks using the directional geological entropy

With an extension of the geological entropy concept in porous media,the approach called directional entrogram is applied to link hydraulic behavior to the anisotropy of the 3D fracture networks.A metric called directional entropic scale is used to measure the anisotropy of spatial order in different directions.Compared with the traditional connectivity indexes based on the statistics of fracture geometry,the directional entropic scale is capable to quantify the anisotropy of connectivity and hydraulic conductivity in heterogeneous 3D fracture networks.According to the numerical analysis of directional entrogram and fluid flow in a number of the 3D fracture networks,the hydraulic conductivities and entropic scales in different directions both increase with spatial order(i.e.,trace length decreasing and spacing increasing)and are independent of the dip angle.As a result,the nonlinear correlation between the hydraulic conductivities and entropic scales from different directions can be unified as quadratic polynomial function,which can shed light on the anisotropic effect of spatial order and global entropy on the heterogeneous hydraulic behaviors.

3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Graph neural network-based scheduling for multi-UAV-enabled communications in D2D networks

In this paper,we jointly design the power control and position dispatch for Multi-Unmanned Aerial Vehicle(UAV)-enabled communication in Device-to-Device(D2D)networks.Our objective is to maximize the total transmission rate of Downlink Users(DUs).Meanwhile,the Quality of Service(QoS)of all D2D users must be satisfied.We comprehensively considered the interference among D2D communications and downlink transmissions.The original problem is strongly non-convex,which requires high computational complexity for traditional optimization methods.And to make matters worse,the results are not necessarily globally optimal.In this paper,we propose a novel Graph Neural Networks(GNN)based approach that can map the considered system into a specific graph structure and achieve the optimal solution in a low complexity manner.Particularly,we first construct a GNN-based model for the proposed network,in which the transmission links and interference links are formulated as vertexes and edges,respectively.Then,by taking the channel state information and the coordinates of ground users as the inputs,as well as the location of UAVs and the transmission power of all transmitters as outputs,we obtain the mapping from inputs to outputs through training the parameters of GNN.Simulation results verified that the way to maximize the total transmission rate of DUs can be extracted effectively via the training on samples.Moreover,it also shows that the performance of proposed GNN-based method is better than that of traditional means.

Numerical Study of the Biomechanical Behavior of a 3D Printed Polymer Esophageal Stent in the Esophagus by BP Neural Network Algorithm

Esophageal disease is a common disorder of the digestive system that can severely affect the quality of life andprognosis of patients. Esophageal stenting is an effective treatment that has been widely used in clinical practice.However, esophageal stents of different types and parameters have varying adaptability and effectiveness forpatients, and they need to be individually selected according to the patient’s specific situation. The purposeof this study was to provide a reference for clinical doctors to choose suitable esophageal stents. We used 3Dprinting technology to fabricate esophageal stents with different ratios of thermoplastic polyurethane (TPU)/(Poly-ε-caprolactone) PCL polymer, and established an artificial neural network model that could predict the radial forceof esophageal stents based on the content of TPU, PCL and print parameter. We selected three optimal ratios formechanical performance tests and evaluated the biomechanical effects of different ratios of stents on esophagealimplantation, swallowing, and stent migration processes through finite element numerical simulation and in vitrosimulation tests. The results showed that different ratios of polymer stents had different mechanical properties,affecting the effectiveness of stent expansion treatment and the possibility of postoperative complications of stentimplantation.

SGT-Net: A Transformer-Based Stratified Graph Convolutional Network for 3D Point Cloud Semantic Segmentation

In recent years,semantic segmentation on 3D point cloud data has attracted much attention.Unlike 2D images where pixels distribute regularly in the image domain,3D point clouds in non-Euclidean space are irregular and inherently sparse.Therefore,it is very difficult to extract long-range contexts and effectively aggregate local features for semantic segmentation in 3D point cloud space.Most current methods either focus on local feature aggregation or long-range context dependency,but fail to directly establish a global-local feature extractor to complete the point cloud semantic segmentation tasks.In this paper,we propose a Transformer-based stratified graph convolutional network(SGT-Net),which enlarges the effective receptive field and builds direct long-range dependency.Specifically,we first propose a novel dense-sparse sampling strategy that provides dense local vertices and sparse long-distance vertices for subsequent graph convolutional network(GCN).Secondly,we propose a multi-key self-attention mechanism based on the Transformer to further weight augmentation for crucial neighboring relationships and enlarge the effective receptive field.In addition,to further improve the efficiency of the network,we propose a similarity measurement module to determine whether the neighborhood near the center point is effective.We demonstrate the validity and superiority of our method on the S3DIS and ShapeNet datasets.Through ablation experiments and segmentation visualization,we verify that the SGT model can improve the performance of the point cloud semantic segmentation.

Outage Probability Analysis for D2D-Enabled Heterogeneous Cellular Networks with Exclusion Zone:A Stochastic Geometry Approach

Interference management is one of the most important issues in the device-to-device(D2D)-enabled heterogeneous cellular networks(HetCNets)due to the coexistence of massive cellular and D2D devices in which D2D devices reuse the cellular spectrum.To alleviate the interference,an efficient interference management way is to set exclusion zones around the cellular receivers.In this paper,we adopt a stochastic geometry approach to analyze the outage probabilities of cellular and D2D users in the D2D-enabled HetCNets.The main difficulties contain three aspects:1)how to model the location randomness of base stations,cellular and D2D users in practical networks;2)how to capture the randomness and interrelation of cellular and D2D transmissions due to the existence of random exclusion zones;3)how to characterize the different types of interference and their impacts on the outage probabilities of cellular and D2D users.We then run extensive Monte-Carlo simulations which manifest that our theoretical model is very accurate.

Review of Artificial Intelligence for Oil and Gas Exploration: Convolutional Neural Network Approaches and the U-Net 3D Model

Deep learning, especially through convolutional neural networks (CNN) such as the U-Net 3D model, has revolutionized fault identification from seismic data, representing a significant leap over traditional methods. Our review traces the evolution of CNN, emphasizing the adaptation and capabilities of the U-Net 3D model in automating seismic fault delineation with unprecedented accuracy. We find: 1) The transition from basic neural networks to sophisticated CNN has enabled remarkable advancements in image recognition, which are directly applicable to analyzing seismic data. The U-Net 3D model, with its innovative architecture, exemplifies this progress by providing a method for detailed and accurate fault detection with reduced manual interpretation bias. 2) The U-Net 3D model has demonstrated its superiority over traditional fault identification methods in several key areas: it has enhanced interpretation accuracy, increased operational efficiency, and reduced the subjectivity of manual methods. 3) Despite these achievements, challenges such as the need for effective data preprocessing, acquisition of high-quality annotated datasets, and achieving model generalization across different geological conditions remain. Future research should therefore focus on developing more complex network architectures and innovative training strategies to refine fault identification performance further. Our findings confirm the transformative potential of deep learning, particularly CNN like the U-Net 3D model, in geosciences, advocating for its broader integration to revolutionize geological exploration and seismic analysis.

基于Compobus/D现场总线的装焊生产线监控系统

基于Compobus/D现场总线的装焊生产线监控管理系统 ,结构简单 ,运行可靠 ,抗干扰能力强并便于扩展 ,实现了对装焊生产线的实时监控及管理。

欧姆龙与西门子PLC之间基于Compobus/d的通讯系统

本文介绍了一种DCS系统改造方案。主要着重分析了现场总线网络,即OMRON与SIEMENS两种PLC之间基于OMRON公司的Compobus/d器件网络链接技术。

基于抑菌实验和网络药理学探讨D-柠檬烯、2-茨醇对白色念珠菌的抑制作用

目的:采用抑菌实验研究蛇床子-冰片药对成分中的D-柠檬烯及2-茨醇的体外抗白色念珠菌作用,并运用网络药理学预测D-柠檬烯和2-茨醇治疗念珠菌病的核心靶点和通路。方法:以白色念珠菌为研究对象,K-B纸片扩散法分别测定0.5、1.0、1.5 mg的D-柠檬烯、2-茨醇、制霉菌素的药液抑菌圈直径;采用试管双倍稀释法和棋盘法,测定D-柠檬烯、2-茨醇的最低抑菌浓度(MIC)以及两两联用的MIC,计算出联合抑菌分数(FIC)。通过Pubchem、SwissTargetPrediction数据库预测D-柠檬烯、2-茨醇的有效靶点;通过GeneCards、OMIM数据库检索念珠菌病相关的疾病靶点;运用Venny软件获得两种化学成分和念珠菌病的共同靶点;运用Cytoscape 3.9. 0软件构建“成分-靶点-疾病”网络;利用STRING数据库构建蛋白互作PPI网络;利用R软件进行GO功能及KEGG通路富集分析。结果:D-柠檬烯的MIC为5 mg/mL,2-茨醇的MIC为2.5 mg/mL。D-柠檬烯与2-茨醇联用的FIC指数为0.75,呈相加作用。网络药理学筛选得到两种成分相关作用靶点152个,疾病靶点893个,两者交集靶点为24个;网络拓扑分析得到核心靶点为肿瘤坏死因子(TNF)、过氧化物酶体增殖物激活受体γ(PPARG)、雌激素受体(ESR1)等;KEGG分析得到核心通路为C型凝集素受体信号通路(C-type lectin receptor signaling pathway)、Fc epsilon RI信号通路(Fc epsilon RI signaling pathway)、催乳素信号通路(prolactin signaling pathway)等。结论:D-柠檬烯、2-茨醇对白色念珠菌均有抑制作用,且2种组分药物联合使用具有一定的协同作用。网络药理学预测初步提示D-柠檬烯、2-茨醇可能通过作用于TNF、PPARG、ESR1等核心靶点调控C型凝集素受体信号通路(C-type lectin receptor signaling pathway)、Fc epsilon RI信号通路(Fc epsilon RI signaling pathway)等以治疗念珠菌病。

维生素D与肥胖相互作用的网络药理学研究

目的:通过网络药理学探讨维生素D与肥胖的相关性,并探索影响维生素D与肥胖共同作用靶点的核心蛋白。方法:通过进入西药数据库(DrugBank数据库)检索Vitamin D的相关靶点;通过DisGeNET数据库检索Obesity的相关靶点;利用Venny平台对成分靶点和疾病靶点取交集;将共有靶点导入String构建蛋白-蛋白相互作用(PPI)网络;对药物疾病靶点做蛋白-蛋白互作网络图,并筛选蛋白与蛋白之间互相作用的核心蛋白。结果:共得Vitamin D药物靶点2个;得到肥胖疾病靶点共2821个,取交集得到Vitamin D药物靶点及肥胖疾病靶点1个(VDR);对药物疾病靶点做蛋白-蛋白互作网络图,影响VDR作用的主要蛋白有GC、CYP27B1、MED1、EP300、RXRA、NCOA3、SMAD3、CTNNB1。结论:维生素D可能通过作用于VDR靶点发挥抗肥胖的作用。GC、CYP27B1、MED1、EP300、RXRA、NCOA3、SMAD3、CTNNB1蛋白可以与VDR相互作用,从而影响维生素D与肥胖共同作用靶点的核心蛋白。

OMRON CompoBus/D网络联网及调试

本文简要的介绍OMRON公司的CompoBus/D网络的基本特点,并以具体的例子阐述了ComBus/D网络系统构成、配置及数据的通讯以及网络测试的一般步骤。

基于D-S证据理论的农作物气候品质预测方法研究:以晚熟杂交柑橘春见为例

【目的】基于多源气象数据构建果实品质(糖含量等级)预测模型,为科学评价果实气候品质及深入挖掘农产品气候资源提供科学依据。【方法】以晚熟柑橘春见果实为研究对象,利用多源数据融合技术、人工神经网络(BP神经网络、RBF神经网络和Elman神经网络)和D-S证据理论,包括气象数据质量控制、特征选取、特征级融合、决策级融合4个步骤,构建基于多源气象数据的果实品质(糖含量等级)预测模型。【结果】春见果实品质预测模型采用BP神经网络预测结果总体准确率为87.50%,平均绝对误差(MAE)为0.150,均方根误差(RMSE)为0.447;RBF神经网络预测结果总体准确率为85.00%,MAE为0.175,RMSE为0.474;Elman神经网络预测结果总体准确率为87.50%,MAE为0.150,RMSE为0.447;D-S证据理论决策融合总体预测准确率达95.20%,分别较BP神经网络、RBF神经网络和Elman神经网络提升7.7百分点、10.2百分点和7.7百分点,MAE和RMSE分别为0.040和0.214,均明显降低。【结论】D-S证据理论决策融合后的果实品质预测准确率相比单一神经网络预测更高、误差更小。

基于CompoBus/D的总线控制网络

CompoBus/D是一个多位、多厂家的机器/生产线控制级别的网络。它将控制和数据融合在一起,并且遵循DeviceNet开放现场网络标准。

基于加权D-S证据理论的旋翼故障诊断

旋翼作为直升机的升力面和操作面,其健康状态对直升机的安全至关重要。旋翼故障诊断技术仍是直升机健康与使用监测系统(Health and usage monitoring system, HUMS)领域的薄弱环节,开发旋翼故障诊断技术具有重要价值。基于信息融合技术,首先分析了旋翼故障的诊断机理,建立了旋翼故障模型,通过流固耦合仿真获取了不同故障下桨叶、轮毂和机身的故障特征信息,生成数据集进行网络训练和验证。然后,利用遗传算法反向传播(Genetic algorithm-backpropagation, GA-BP)优化神经网络诊断3种类型的直升机旋翼故障,即后缘调整片误调、变距拉杆误调和桨叶质量不平衡。3个逐级神经网络分别对旋翼故障类型、故障位置和故障程度进行了诊断识别。最后采用加权的Dempster-Shafer(D-S)证据理论对旋翼故障进行诊断和分析。结果证明基于改进D-S证据理论的旋翼故障诊断方法能够成功应用到旋翼故障诊断中,并具有良好的识别效果。

基于d-q变换及WOA-LSTM的异步电机定子匝间短路故障诊断方法

为了实现对异步电机定子绕组匝间短路故障的可靠在线诊断,提出一种基于d-q变换及鲸鱼优化算法(WOA)优化的长短期记忆网络(LSTM)的故障诊断方法。通过理论推导可知,d-q变换可有效提取定子电流中的特征频谱数据。采用鲸鱼优化算法对长短期记忆网络中的3个关键参数进行优化,建立WOA-LSTM故障分类模型。为了验证基于d-q变换和WOA-LSTM故障诊断方法的有效性,分别以小波变换、快速傅里叶变换及d-q变换提取电流频谱数据作为输入数据集,以一台YE2-100L1-4型异步电机为实验对象进行实验验证。研究结果表明:相比于小波变换及快速傅里叶变换,采用d-q变换能更准确的提取出定子电流中的故障特征,更精确地反映电机故障状态,有助于提高故障分类准确率;相比于传统的LSTM算法,经WOA优化后的LSTM算法分类准确率可达98.3%,能可靠地实现不同程度匝间短路故障的诊断。

CompoBus/D网络在污水处理系统中的应用

经过对当前社会上存在的污水处理困难问题的研究,并到现场进行了实际调查,发现要改善当前的现状,必须采取完善的自动控制系统。经过多次试验证明,CompoBus/D网络应用在污水处理系统中能起到较好的效果,因在系统中尤其是硬件和软件系统中采用了PLC控制方法,使得系统具有自动化程度高、性能稳定可靠、处理效果好等特点。最后经过试验证明,其他类似的系统中也可以采用此类控制方法。

Federated learning based QoS-aware caching decisions in fog-enabled internet of things networks

Quality of Service(QoS)in the 6G application scenario is an important issue with the premise of the massive data transmission.Edge caching based on the fog computing network is considered as a potential solution to effectively reduce the content fetch delay for latency-sensitive services of Internet of Things(IoT)devices.Considering the time-varying scenario,the machine learning techniques could further reduce the content fetch delay by optimizing the caching decisions.In this paper,to minimize the content fetch delay and ensure the QoS of the network,a Device-to-Device(D2D)assisted fog computing network architecture is introduced,which supports federated learning and QoS-aware caching decisions based on time-varying user preferences.To release the network congestion and the risk of the user privacy leakage,federated learning,is enabled in the D2D-assisted fog computing network.Specifically,it has been observed that federated learning yields suboptimal results according to the Non-Independent Identical Distribution(Non-IID)of local users data.To address this issue,a distributed cluster-based user preference estimation algorithm is proposed to optimize the content caching placement,improve the cache hit rate,the content fetch delay and the convergence rate,which can effectively mitigate the impact of the Non-IID data set by clustering.The simulation results show that the proposed algorithm provides a considerable performance improvement with better learning results compared with the existing algorithms.

Short‐term and long‐term memory self‐attention network for segmentation of tumours in 3D medical images

Tumour segmentation in medical images(especially 3D tumour segmentation)is highly challenging due to the possible similarity between tumours and adjacent tissues,occurrence of multiple tumours and variable tumour shapes and sizes.The popular deep learning‐based segmentation algorithms generally rely on the convolutional neural network(CNN)and Transformer.The former cannot extract the global image features effectively while the latter lacks the inductive bias and involves the complicated computation for 3D volume data.The existing hybrid CNN‐Transformer network can only provide the limited performance improvement or even poorer segmentation performance than the pure CNN.To address these issues,a short‐term and long‐term memory self‐attention network is proposed.Firstly,a distinctive self‐attention block uses the Transformer to explore the correlation among the region features at different levels extracted by the CNN.Then,the memory structure filters and combines the above information to exclude the similar regions and detect the multiple tumours.Finally,the multi‐layer reconstruction blocks will predict the tumour boundaries.Experimental results demonstrate that our method outperforms other methods in terms of subjective visual and quantitative evaluation.Compared with the most competitive method,the proposed method provides Dice(82.4%vs.76.6%)and Hausdorff distance 95%(HD95)(10.66 vs.11.54 mm)on the KiTS19 as well as Dice(80.2%vs.78.4%)and HD95(9.632 vs.12.17 mm)on the LiTS.